Search

Halloysite nanotube (HNT) was etched by hydrochloric acid, and epigallocatechin gallate (EGCG) was loaded into the etched HNT (HH) to prepare loaded antioxidant (HH‐E) for polylactic acid (PLA) with improved thermal‐oxidative stability. The loading process was confirmed by TGA and FT‐IR, and the loading capacity was 16.15%. The presence of EGCG on the surface of etched HNT was further confirmed by nitrogen adsorption and TEM. The effect of loaded EGCG on thermal‐oxidative stability of PLA was characterized by the change in OOT values of PLA after the aging process under 140°C. The results showed that HH‐E increased OOT values of PLA from 231.2°C to 293.6°C at first, indicating that HH‐E provided PLA with excellent thermal‐oxidative stability. Furthermore, as can be seen from the trend of OOT changing over aging time, during the 14 days aging process, OOT values of PLA composites with HH‐E decreased more slowly than that of PLA composites with EGCG alone, endowing PLA with sustainable thermal‐oxidative stability. Further kinetic analysis showed that the apparent activation energy of the degradation process (Ea) of PLA composites with HH‐E changed less than that of PLA composites with EGCG alone, which showed that the loading system provided PLA better sustainable stability. Moreover, the isothermal crystallization process of modified PLA was characterized by DSC and POM. The results showed that HH‐E provided heterogeneous crystal nucleus for PLA, reducing the half crystallization time (t0.5) and improvement of crystallization rate for PLA. These results prove that HH‐E exhibited excellent performance in improving the thermal stability and crystallization property of PLA, showing multifunctional characterization. [ABSTRACT FROM AUTHOR]

Phosphorus-doped hexagonal tubular carbon nitride (P-TCN) with the layered stacking structure was obtained from a hexagonal rod-like single crystal supramolecular precursor (monoclinic, C2/ m). The production process of P-TCN involves two steps: 1) the precursor was prepared by self-assembly of melamine with cyanuric acid from in situ hydrolysis of melamine under phosphorous acid-assisted hydrothermal conditions; 2) the pyrolysis was initiated at the center of precursor under heating, thus giving the hexagonal P-TCN. The tubular structure favors the enhancement of light scattering and active sites. Meanwhile, the introduction of phosphorus leads to a narrow band gap and increased electric conductivity. Thus, the P-TCN exhibited a high hydrogen evolution rate of 67 μmol h−1 (0.1 g catalyst, λ >420 nm) in the presence of sacrificial agents, and an apparent quantum efficiency of 5.68 % at 420 nm, which is better than most of bulk g-C3N4 reported. [ABSTRACT FROM AUTHOR]

The controllable tuning of the excited states in a series of phosphine-oxide hosts ( DPExPOCz n) was realized through introducing carbazolyl and diphenylphosphine-oxide (DPPO) moieties to adjust the frontier molecular orbitals, molecular rigidity, and the location of the triplet excited states by suppressing the intramolecular interplay of the combined multi-insulating and meso linkage. On increasing the number of substituents, simultaneous lowering of the first singlet energy levels (S1) and raising of the first triplet energy levels (T1, about 3.0 eV) were achieved. The former change was mainly due to the contribution of the carbazolyl group to the HOMOs and the extended conjugation. The latter change was due to an enhanced molecular rigidity and the shift of the T1 states from the diphenylether group to the carbazolyl moieties. This kind of convergent modulation of excited states not only facilitates the exothermic energy transfer to the dopants in phosphorescent organic light-emitting diodes (PHOLEDs), but also realizes the fine-tuning of electrical properties to achieve the balanced carrier injection and transportation in the emitting layers. As the result, the favorable performance of blue-light-emitting PHOLEDs was demonstrated, including much-lower driving voltages of 2.6 V for onset and 3.0 V at 100 cd m−2, as well as a remarkably improved E.Q.E. of 12.6 %. [ABSTRACT FROM AUTHOR]

The controllable tuning of the excited states in a series of phosphine-oxide hosts (DPExPOCzn) was realized through introducing carbazolyl and diphenylphosphine-oxide (DPPO) moieties to adjust the frontier molecular orbitals, molecular rigidity, and the location of the triplet excited states by suppressing the intramolecular interplay of the combined multi-insulating and meso linkage. On increasing the number of substituents, simultaneous lowering of the first singlet energy levels (S(1)) and raising of the first triplet energy levels (T(1), about 3.0 eV) were achieved. The former change was mainly due to the contribution of the carbazolyl group to the HOMOs and the extended conjugation. The latter change was due to an enhanced molecular rigidity and the shift of the T(1) states from the diphenylether group to the carbazolyl moieties. This kind of convergent modulation of excited states not only facilitates the exothermic energy transfer to the dopants in phosphorescent organic light-emitting diodes (PHOLEDs), but also realizes the fine-tuning of electrical properties to achieve the balanced carrier injection and transportation in the emitting layers. As the result, the favorable performance of blue-light-emitting PHOLEDs was demonstrated, including much-lower driving voltages of 2.6 V for onset and 3.0 V at 100 cd m(-2), as well as a remarkably improved E.Q.E. of 12.6%., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

An efficient host for blue and green electrophosphorescence, 4,6-bis(diphenylphosphoryl)dibenzofuran (o-DBFDPO), with the structure of a short-axis-substituted dibenzofuran was designed and synthesised. It appears that the greater density of the diphenylphosphine oxide (DPPO) moieties in the short-axis substitution configuration effectively restrains the intermolecular interactions, because only very weak π-π stacking interactions could be observed, with a centroid-to-centroid distance of 3.960 Å. The improved thermal stability of o-DBFDPO was corroborated by its very high glass transition temperature (T(g)) of 191 °C, which is the result of the symmetric disubstitution structure. Photophysical investigation showed o-DBFDPO to be superior to the monosubstituted derivative, with a longer lifetime (1.95 ns) and a higher photoluminescent quantum efficiency (61 %). The lower first singlet state excited level (3.63 eV) of o-DBFDPO demonstrates the stronger polarisation effect attributable to the greater number of DPPO moieties. Simultaneously, an extremely high first triplet state excited level (T(1)) of 3.16 eV is observed, demonstrating the tiny influence of short-axis substitution on T(1). The improved carrier injection ability, which contributed to low driving voltages of blue- and green-emitting phosphorescent organic light-emitting diodes (PHOLEDs), was further confirmed by Gaussian calculation. Furthermore, the better thermal and morphological properties of o-DBFDPO and the matched frontier molecular orbital (FMO) levels in the devices significantly reduced efficiency roll-offs. Efficient blue and green electrophosphorescence based on the o-DBFDPO host was demonstrated., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)