Search

In this paper, the ohmic contact mechanism and gate electrostatic control of a deep-recessed ohmic contact structure for multi-channel Al0.3Ga0.7N/GaN high electron mobility transistors (HEMTs) is investigated. A transmission electron microscope and an energy dispersive spectrum are utilized to investigate the ohmic contact interface mechanism. Due to a reduction of source/drain parasitic resistances and simultaneous connection of five channels by using deep-recessed ohmic contact, a large maximum drain current density and a distinct five hump feature of ultra-wider trans-conductance are achieved. More importantly, it is revealed that the downward expansion of the gate potential for the deep-recessed ohmic contact structure is much deeper than that for conventional devices. This characteristic leads to a remarkable reduction in subthreshold swing (SS) and off-state leakage, indicating an ultra-wide and high trans-conductance profile. The fabricated devices show a lower off-state drain leakage, a lower SS, and a wider gate voltage swing (40 V). Due to an enhancement of gate electrostatic control, the current collapse and electrical reliability characteristics of multi-channel Al0.3Ga0.7N/GaN HEMTs with deep-recessed ohmic contact also improve. The results presented here indicate that the multi-channel device has great potential for high current and wide bandwidth applications. [ABSTRACT FROM AUTHOR]

Passivation is commonly used to suppress current collapse in AlGaN/GaN HEMTs. However, the conventional PECV-fabricated SiNx passivation layer is incompatible with the latest process, like the "passivation-prior-to-ohmic" method. Research attention has therefore turned to high-temperature passivation schemes. In this paper, we systematically investigated the differences between the SiNx/GaN interface of two high-temperature passivation schemes, MOCVD-SiNx and LPCVD-SiNx, and investigated their effects on the ohmic contact mechanism. By characterizing the device interface using TEM, we reveal that during the process of MOCVD-SiNx, etching damage and Si diffuses into the semiconductor to form a leakage path and reduce the breakdown voltage of the AlGaN/GaN HEMTs. Moreover, N enrichment at the edge of the ohmic region of the LPCVD-SiNx device indicates that the device is more favorable for TiN formation, thus reducing the ohmic contact resistance, which is beneficial to improving the PAE of the device. Through the CW load-pull test with drain voltage VDS = 20V, LPCVD-SiNx devices obtain a high PAE of 66.35%, which is about 6% higher than MOCVD-SiNx devices. This excellent result indicates that the prospect of LPCVD-SiNx passivation devices used in 5G small terminals will be attractive. [ABSTRACT FROM AUTHOR]