Search

In this paper, the mechanical properties and internal stress condition of the reinforcing bar sleeve connectors with ferro-tailed mineral sand cementitious grout as filler material were analyzed as research objects. Firstly, an experimental study was carried out on the reinforcing bar sleeve connectors of iron tailing sand grout with a 40% substitution rate of mechanism sand to analyze the mechanical properties of different grout types, age, and reinforcement diameters under unidirectional tensile, high stress, and large deformation of repeated tensile and compressive stresses. Next, five groups of sleeve joints with different anchorage lengths were set up for unidirectional tensile tests. The results show that, with the decrease of the diameter of the reinforcement, the grip force and bond strength of the iron tailing sand grout on the internal reinforcement gradually increase. Under conditions of large deformation and high stress due to repeated tensile loading, the residual deformation and total elongation of iron tailing sand grout sleeve joints are satisfactory. Additionally, the restraining anchorage effect of iron tailing sand grout in the end section is small. The utilization rate and integrity of iron tailing sand grout in the initial anchorage section are better. [ABSTRACT FROM AUTHOR]

To improve the seismic performance of coupled shear walls in high‐rise buildings and to eliminate the problems of large residual deformation and relatively small initial stiffness and damping properties of the traditional viscoelastic coupling beam damper (TVCBD), an innovative shape memory alloy (SMA)‐cable‐controlled self‐centering viscoelastic coupling beam damper (SVCBD) with energy dissipation and self‐centering capabilities was designed and investigated in this study. The construction form and operating principles of the SVCBD were proposed, relevant material performance tests of the cables were performed, and good results were obtained. Finally, the contribution of the SVCBD to seismic mitigation of a 10‐story reinforced concrete coupled shear wall structure was verified by seismic time‐history analyses. The results indicated that compared with TVCBD, SVCBD possesses fuller hysteretic curves, showing stronger energy dissipation capacity, higher initial stiffness, and much smaller residual deformation. The initial strain and cross‐sectional area of the SMA cables and the shear area of the viscoelastic plates affect the energy dissipation and self‐centering performance of SVCBD significantly. The seismic response and post‐earthquake residual deformation of the coupled shear wall structure and the plastic damage of the main components can be effectively controlled by utilizing the proposed SVCBD. [ABSTRACT FROM AUTHOR]

In order to realize the self-centering, high energy consumption, and high ductility of the existing building structure through strengthening and retrofit of structure, a method of reinforced concrete (RC) beam strengthened by using Shape Memory Alloy (SMA) and Engineered Cementitious Composites (ECC) was proposed. Four kinds of specimens were designed, including one beam strengthened with enlarging section area of steel reinforced concrete, one beam strengthened with enlarging section area of SMA reinforced concrete, beam strengthened with enlarging section area of SMA reinforced ECC, and beam strengthened with enlarging section area of steel reinforced ECC; these specimens were manufactured for the monotonic cycle loading tests study on its bending behavior. The influence on the bearing capacity, energy dissipation performance, and self-recovery capacity for each test specimens with different strengthening materials were investigated, especially the bending behavior of the beams strengthened by SMA reinforced ECC. The results show that, compared with the ordinary reinforced concrete beams, strengthening existing RC beam with enlarging section area of SMA reinforced ECC can improve the self-recovery capacity, ductility, and deformability of the specimens. Finally, a revised design formula for the bending capacity of RC beams, strengthened with enlarging sections of ECC, was proposed by considering the tensile capacity provided by ECC, and the calculated values are in good agreement with the experimental value, indicating that the revised formula can be well applied to the beam strengthening with enlarging section of SMA-ECC Materials. [ABSTRACT FROM AUTHOR]