Search

Dry heat treatment (DHT) has been demonstrated as a viable method for starch modification, offering benefits due to its environmentally friendly process and low operational costs. This research modified potato starch using different DHT conditions (continuous-CDHT and cyclic-RDHT), with durations ranging from 3 to 15 h and 1 to 5 cycles, at 120 °C. The study investigated and compared the structural, thermal, pasting, and morphological properties of the treated samples to those of untreated potato starch, including in vitro digestibility post-modification. DHT altered the amylose content of the biopolymer. X-ray diffraction patterns transitioned from type B to type C, and a decrease in relative crystallinity (RC%) was observed. Morphological changes were more pronounced in starches modified by RDHT. Paste viscosities of both CDHT and RDHT-treated starches decreased significantly, by 61.7 % and 58.1 % respectively, compared to native starch. The gelatinization enthalpy of RDHT-treated starches reduced notably, from 17.60 to 16.10 J g -1 . Additionally, starch digestibility was impacted, with cyclic treatments yielding a significant increase in resistant starch content, notably an 18.26 % rise. These findings underscore the efficacy of dry heat in enhancing the functional properties of potato starch., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This work aimed to produce collagens and hydrolysates with antimicrobial and antioxidant activity from sheep slaughter by-products. The by-products (sheep and lamb) were treated and extracted. The collagens were hydrolyzed with the enzyme Alcalase ® . The spectra of collagens and hydrolysates were similar (amide bands I, II, III, A, B). The bands presented by the collagens (α 1 , α 2 , β) were characteristic of type I collagen. The hydrolysates showed molecular weight peptides equal to/lower than 15 kDa. Collagens had a denaturation temperature of 39.32 (lamb) and 36.38 °C (sheep), whereas the hydrolysates did not undergo thermal transition. Hydrolysates showed lower values of antioxidant activity (AA) than the collagens. The collagens from lamb and from sheep displayed an AA of 13.4% (concentration of 0.0002%) and 13.1% (concentration of 0.0005%), respectively. At the concentration of 0.0020%, the lamb hydrolysates displayed an AA of 10.2%, whereas the sheep hydrolysates had an AA of only 1.98%. Collagen also showed higher antimicrobial activity compared to hydrolysates, requiring a lower concentration to inhibit the microorganisms tested. Sheep slaughter by-products proved to be a viable source for obtaining protein hydrolysates and collagens with antimicrobial and antioxidant activity, which can be applied in the development of nutraceuticals beneficial to human health.

The residue from chicken mechanically separated meat (MSM) is a potential source for the extraction of collagen. However, this process requires the removal of many covalent crosslinks, which makes it quite complex. Ultrasound has been successfully used to extract collagen; it reduces the process time and increases the yield. However, information regarding the effects of this treatment on the structural and functional properties of proteins is still very limited. Therefore, the aims of the present study were to obtain collagen from chicken MSM residue and to test the effects of pre-treatment with ultrasonic probe and enzymatic extraction with pepsin in its yield, as well as to evaluate the properties of extracted collagen using gel electrophoresis, Fourier-transform infrared spectroscopy, solubility, and differential scanning calorimetry. Both the ultrasound and the enzymatic extraction had a positive effect on the extraction yield of collagen from chicken MSM residue without affecting its integrity. Using ultrasound led to an increase of up to 40% in yield when compared to treatments without ultrasound application. Five extraction treatments were considered. The extracted collagen exhibited high thermal stability (43.9-47.0 °C) and mainly type I structure. The use of ultrasound as pre-treatment, together with enzymatic extraction with pepsin, were effective in increasing the extraction yield of collagen from chicken MSM residue, as well as preserving the triple helical structure of the native collagen., (© Association of Food Scientists & Technologists (India) 2020.)

There is a growing search for alternative raw materials to obtain collagen and hydrolysates and processes that do not threaten the environment or human health. Thus, sheep slaughter residue, which doesn't yet have an adequate and sustainable destination, is an excellent source of study. The objective of this study was to investigate the technological properties of collagen extracted from sheep slaughter by-products. It was possible to produce and characterize collagens extracted from sheep slaughter by-products. The yield of collagen was 18.0% and 12.5% for lamb and sheep by-products, respectively, on a dry basis. Lamb and sheep collagens showed similar FTIR and digestibility spectra and increased solubility at acidic pH-value. Higher foaming capacity was found for lamb collagen, while the sheep collagen presented higher viscosity. The emulsifying power of the collagens was 59.1 and 69.6 m 2 /g for lamb and sheep by-products, respectively. The collagens presented bands corresponding to α 1 , α 2 , and β chains, characteristic of collagen type I and a molecular weight (SDS-PAGE) between 100 and 5 kDa. The collagens of this study showed potential for application in food products, both for the technological improvement and nutrient enrichment, adding value and giving a sustainable destination to sheep slaughter by-products., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Cassava bagasse, a high-fiber coproduct of cassava starch processing, was used to produce lignocellulose nanofibers (LCNF) to apply as reinforcement in cassava starch films. LCNF-reinforced cast starch films were evaluated for changes in structural, thermal and mechanical properties and compared with control films reinforced with commercial grade nanoclay (Nclay). Five different types of cassava starch cast-films were produced: no-reinforcement control, two LCNF-reinforced, and two Nclay-reinforced, each at 0.65 and 1.3% w w -1 . The LCNF morphology showed the characteristic microscopic structure of lignocellulose nanofibers, with an aspect ratio > 85 and average diameter of 4.5 nm. All reinforced films were transparent and had a good distribution of the nanoparticles within. The opacity values reduced for the films with all nanoreinforcements, compared to control. The permeability to water vapor reduced with reinforcements, with lower values for the films tested with LCNF 0.65 and Nclay 1.3. Thermal stability improved with 1.3% of LCNF and both concentrations of Nclay. Tensile stress for films increased and elongation at break value decreased with both types of nanoreinforcements., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Introduction: Bleached enamel surfaces may undergo changes and retain more dye, which is a reason to recommend the reduction/suspension of foods with dyes during dental bleaching., Aim: Evaluate the effects of the action of natural and artificial dyes on the bleached enamel of extracted human teeth., Materials and Methods: Fifty human premolars were used, which were distributed in 5 groups (n = 10) according to the following staining solutions: GW (distilled water); GB (beet); Gca (caramel); GC (carmine); and GR (red 40). After the removal of the root and pulp section, the teeth were embedded in acrylic resin blocks, stored in artificial saliva, and kept at 37°C. At-home bleaching was performed using 16% carbamide peroxide (CP) for 3 hours daily for 3 weeks. After each daily session of bleaching, the specimens were exposed to the dye solution twice a day for 5 min; one of these exposures was performed immediately after bleaching. The color was recorded using a spectrophotometer according to the CIE Lab system (Δ E) for the following periods: baseline, during bleaching (after 1st, 2nd, and 3rd week) and post-bleaching (after 1 week and 1 month). The color was evaluated by two-way analysis of variance and Tukey's test (α=0.05)., Results: There was effective dental bleaching for all groups: GW (18.5 ± 6.1), GB (19.9 ± 4.4), Gca (18.9 ± 6.1), GC (20.2 ± 4.6), and GR (19.3 ± 4.2), p <0.01. No color rebound was observed after 1 week and 1 month ( p >0.05)., Conclusion: The exposure to beet, carmine, caramel, and red 40 dyes did not interfere with the effectiveness of dental bleaching using 16% CP., Clinical Significance: Dyes consumption during bleaching did not affect the effectiveness of dental bleaching.

Background: Freeze concentration is an alternative process where bioactive compounds are preserved during the processing of juice concentrates. This study proposed a simple and cheaper cryoconcentration process assisted by centrifugation in apple juice., Results: The levels of phenolics increased significantly (P < 0.05) with each freeze concentration cycle that was performed. Furthermore, the process resulted in an average increase in the concentration of phenolics of 1.9, 2.9 and 3.8 times for the first, second and third steps of the concentration, respectively. In relation to phenolics, the antioxidant potential, which was evaluated by radical scavenging activity and reduction power, also increased with the cryoconcentration steps. The influence of the phenolics on the in vitro antioxidant activity was confirmed by a significant correlation between the antioxidant assays and total phenolics, flavonoids, flavan-3-ols, and flavonols (r > 0.70)., Conclusion: The increase in antioxidant activity may have been attributed to the increase in the phenolic compounds in the apple juices because of the cryoconcentration process. Therefore, this could be an excellent natural product to supplement and enrich blends, juices, ciders, smoothies, and jams in order to improve the sensorial, nutritional and antioxidant properties. © 2018 Society of Chemical Industry., (© 2018 Society of Chemical Industry.)

The objective of this study was to develop a formulation that can retard staling/retrogradation of cheese breads without compromising their texture and expansion properties. During baking the dough expands and becomes soft, with lower density. Binary mixtures of cassava starch (Native + Oxidized) and with guar gum (Oxidized + Guar Gum) as well as a ternary mixture (Native + Oxidized + Guar Gum) were prepared. The mixtures were analyzed for freeze-thaw stability, expansion, pasting, thermal structural and retrogradation properties. The results were compared with those of sour cassava starch ( polvilho azedo -PA), native cassava starch (N) and oxidized cassava starch (O). Moreover, cheese breads were prepared with these mixtures and evaluated during storage. The ternary mixture N + O + GG showed superior freeze-thaw stability (syneresis of 4.9, 7.8 and 11.0% in 1st, 2nd and 3rd cycles, respectively); the low retrogradation of this sample was confirmed both by DSC and FTIR analyses. The sample N + O + GG had a high expansion (> 10 mL/g) and the cheese breads developed with this mixture had a slower staling. Our results confirmed that the mixture N + O + GG can improve formulations of gluten-free baked foods.

The extraction of nanocrystalline cellulose from agro-residues is an interesting alternative to recover these materials. In the present study, nanocrystalline cellulose was extracted from pine wood and corncob. In addition, microcrystalline cellulose was used as a reference to compare results. Initially, the lignocellulosic residues were submitted to delignification pre-treatments. At the end of the process, the bleached fibre was submitted to acid hydrolysis. Additionally, microparticles were obtained from the spray-drying of the nanocrystalline cellulose suspensions. The nanocrystalline cellulose yield for the pine wood was 9.0-% of the value attained for the microcrystalline cellulose. For the corncob, the value was 23.5-%. Therefore, complementary studies are necessary to improve the yield. The spray-dried microparticles showed a crystallinity index of 67.8-% for the pine wood, 70.9-% for the corncob and 79.3-% for the microcrystalline cellulose. These microparticles have great potential for use in the production of polymer composites processed by extrusion., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Callisto(®), containing the active ingredient mesotrione (2-[4-methylsulfonyl-2-nitrobenzoyl]1,3-cyclohenanedione), is a selective herbicide that controls weeds in corn crops and is a potential environmental contaminant. The objective of this work was to evaluate enzymatic and structural changes in Pantoea ananatis, a strain isolated from water, in response to exposure to this herbicide. Despite degradation of mesotrione, probably due a glutathione-S-transferase (GST) pathway in Pantoea ananatis, this herbicide induced oxidative stress by increasing hydrogen peroxide production. Thiol fragments, eventually produced after mesotrione degradation, could be involved in increased GST activity. Nevertheless, there was no peroxidation damage related to this production, as malondialdehyde (MDA) synthesis, which is due to lipid peroxidation, was highest in the controls, followed by the mesotrione- and Callisto(®)-treated cultures at log growth phase. Therefore, P. ananatis can tolerate and grow in the presence of the herbicide, probably due an efficient control of oxidative stress by a polymorphic catalase system. MDA rates depend on lipid saturation due to a pattern change to a higher level of saturation. These changes are likely related to the formation of GST-mesotrione conjugates and mesotrione degradation-specific metabolites and to the presence of cytotoxic adjuvants. These features may shift lipid membrane saturation, possibly providing a protective effect to bacteria through an increase in membrane impermeability. This response system in P. ananatis provides a novel model for bacterial herbicide tolerance and adaptation in the environment.

This study aimed to establish a manufacturing protocol and to characterize semihard cheese covered with lard and rosemary during ripening. After the manufacturing protocol was defined, the cheeses were produced with pasteurized and raw milk from Holstein cows, with and without (control) coating, and then ripened for 60 d. During this period the physicochemical properties, color, proteolysis, texture profile, and sensory acceptance were performed. The early-ripening cheeses differed from the others in terms of color and moisture content. Multivariate statistical analysis separated chesses in groups differentiated by the effects of heat treatment of milk and ripening period. The ripened cheeses obtained from raw milk were sensorially more preferred. The coating gave the final products higher moisture content and favored color and texture characteristics. Consumer testing showed that the cheese obtained from raw milk and coated with lard and rosemary was the most preferred (acceptance of 82%) due to the specific coating of rosemary (aroma and flavor). This product has potential to add value and to diversify the production of semihard cheeses., (© 2015 Institute of Food Technologists®)

The objective of this work was to evaluate the effect of adding different starches (native and modified) on the physicochemical, sensory, structural and microbiological characteristics of low-fat chicken mortadella. Two formulations containing native cassava and regular corn starch, coded CASS (5.0 % of cassava starch) and CORN (5.0 % of regular corn starch), and one formulation produced with physically treated starch coded as MOD1 (2.5 % of Novation 2300) and chemically modified starch coded as MOD2 (2.5 % of Thermtex) were studied. The following tests were performed: physicochemical characterization (moisture, ash, protein, starch and lipid contents, and water activity); cooling, freezing and reheating losses; texture (texture profile test); color coordinates (L*, a*, b*, C and h); microbiological evaluation; sensory evaluation (multiple comparison and preference test); and histological evaluation (light microscopy). There was no significant difference (p > 0.05) for ash, protein, cooling loss, cohesiveness or in the preference test for the tested samples. The other evaluated parameters showed significant differences (p < 0.05). Histological study allowed for a qualitative evaluation between the physical properties of the food and its microscopic structure. The best results were obtained for formulation MOD2 (2.5 % Thermtex). The addition of modified starch resulted in a better performance than the native starch in relation to the evaluated technological parameters, mainly in relation to reheating losses, which demonstrated the good interaction between the modified starch in the structure of the product and the possibility of the application of this type of starch in other types of functional meat products.

Acid whey is a by-product from cheese processing that can be employed in beverage formulations due to its high nutritional quality. The objective of the present work was to study the physicochemical characterisation of acid whey from Petit Suisse-type cheese production and use this by-product in the formulation of fermented milk, substituting water. In addition, a reduction in the fermentation period was tested. Both the final product and the acid whey were analysed considering physicochemical determinations, and the fermented milk was evaluated by means of sensory analysis, including multiple comparison and acceptance tests, as well as purchase intention. The results of the physicochemical analyses showed that whey which was produced during both winter and summer presented higher values of protein (1.22 and 0.97 %, w/v, respectively), but there were no differences in lactose content. During the autumn, the highest solid extract was found in whey (6.00 %, w/v), with larger amounts of lactose (4.73 %, w/v) and ash (0.83 %, w/v). When analysing the fermented milk produced with added acid whey, the acceptance test resulted in 90 % of acceptance; the purchase intention showed that 54 % of the consumers would 'certainly buy' and 38 % would 'probably buy' the product. Using acid whey in a fermented milk formulation was technically viable, allowing by-product value aggregation, avoiding discharge, lowering water consumption and shortening the fermentation period.

In this work, cassava starch was modified by treatment with sodium hypochlorite (NaClO) at different concentrations (0.8, 2.0 and 5.0 % of active chlorine) and selected physicochemical properties of the oxidized starches were investigated. The native and modified samples were evaluated considering moisture, carboxyl content, apparent viscosity, susceptibility to syneresis, mid-infrared spectroscopy and crystallinity index. The treatment with NaClO resulted in alterations in carboxyl content of the oxidized starches that increased with increasing concentration of the oxidant. Oxidized starches also showed higher susceptibility to syneresis, as assessed by the release of liquid during freezing and thawing. Apparent viscosity analysis showed decrease in peak viscosity of the oxidized starches. X-ray diffractograms showed that the oxidation influenced the extent of cassava starch relative crystallinity found to lie between 34.4 % (native) and 39.9 % (2.0 % active chlorine). The infrared spectra are sensitive to structural changes on starch macromolecules and presented characteristic peaks as C-O-C of the six carbon glucose ring absorbs at 1,150-1,085 cm(-1) and due to axial deformation these bands changed with the crystal structure of the starch samples.

The intensive use of agrochemicals has played an important role in increasing agricultural production. One of the impacts of agrochemical use has been changes in population structure of soil microbiota. The aim of this work was to analyze the adaptive strategies that bacteria use to overcome oxidative stress caused by mesotrione, which inhibits 4-hydroxyphenylpyruvate dioxygenase. We also examined antioxidative stress systems, saturation changes of lipid membranes, and the capacity of bacteria to degrade mesotrione. Escherichia coli DH5-á was chosen as a non-environmental strain, which is already a model bacterium for studying metabolism and adaptation. The results showed that this bacterium was able to tolerate high doses of the herbicide (10× field rate), and completely degraded mesotrione after 3 h of exposure, as determined by a High Performance Liquid Chromatography. Growth rates in the presence of mesotrione were lower than in the control, prior to the period of degradation, showing toxic effects of this herbicide on bacterial cells. Changes in the saturation of the membrane lipids reduced the damage caused by reactive oxygen species and possibly hindered the entry of xenobiotics in the cell, while activating glutathione-S-transferase enzyme in the antioxidant system and in the metabolizing process of the herbicide. Considering that E. coli DH5-α is a non-environmental strain and it had no previous contact with mesotrione, the defense system found in this strain could be considered non-specific. This bacterium system response may be a general adaptation mechanism by which bacterial strains resist to damage from the presence of herbicides in agricultural soils.

The extraction of phenolic compounds from apples was optimised using response surface methodology (RSM). A Box-Behnken design was conducted to analyse the effects of solvent concentration (methanol or acetone), temperature and time on the extraction of total phenolic content, total flavonoids and antioxidant capacity (FRAP and DPPH). Analysis of the individual phenolics was performed by HPLC in optimal extraction conditions. The optimisation suggested that extraction with 84.5% methanol for 15 min, at 28 °C and extraction with 65% acetone for 20 min, at 10 °C were the best solutions for this combination of variables. RSM was shown to be an adequate approach for modelling the extraction of phenolic compounds from apples. Most of the experiments with acetone solutions extracted more bioactive compounds, and hence they had more antioxidant capacity, however, chlorogenic acid and phloridzin had higher yields (32.4% and 48.4%, respectively) in extraction with methanol., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Soy-based beverages are presented as healthy food alternatives for human nutrition. Cassava (Manihot esculenta, Crantz) starch is relatively inexpensive, widely available in Brazil and is broadly used by the food industry due to its desired properties that result from pasting. The objective of this study was to develop soy-based beverages with good sensory quality using native cassava starch as a stabilizer and maintaining the nutritional value that makes this product a functional food. The developed formulations featured a range of cassava starch and soybean extract concentrations, which were tested in a 2² experimental design with three central points. The results of sensory analysis showed that the studied variables (cassava starch and soybean extract concentrations) did not have a significant effect with respect to a 5% probability level. When considering the apparent viscosity, on the other hand, the variables had a significant effect: the increase in soybean extract and cassava starch concentrations caused an increase in the viscosity of the final product. The profile of isoflavones in the tested formulations was similar to the profiles reported in other papers, with a predominance of the conjugated glycosides over the aglycone forms.