Search

Ebola virus disease is a deadly pathogenic disease with a fatality rate of 25–90 % as recorded in previous outbreaks. The Ebola Virus glycoprotein (EBOV-GP) plays a crucial role in the entry of viruses into human cells, making it an interesting target for therapeutic discovery. Therefore, inhibiting this protein can directly limit the virus replication and disease progression at an early stage of infection. The present study focuses on the design of novel potent EBOV-GP inhibitors using multiple computational techniques. In this context, two QSAR models were built from a set of 86 amodiaquine derivatives as anti-EBOV-GP using Monte Carlo and genetic algorithm multiple linear regression methods. Both models confirmed their predictive performance with satisfactory statistical parameters of the validation (R2 = 0.9129; Q2 = 0.8848 for the CORAL model and R2 = 0.8848; Q2 = 0.8148 for the GA-MLR model). From the outputs of the CORAL model, the structural fragments responsible for increasing and decreasing the inhibition activity were extracted and interpreted. This molecular information was used to design 26 new potentially safe and active candidate drugs. Molecular docking and dynamics simulations have affirmed the efficacy of the designed compounds. Specifically, compounds D2 (pIC50_coral = 7.12; pIC50_GA-MLR = 7.07), D3 (pIC50_coral = 7.83; pIC50_GA-MLR = 7.10), and D5 (pIC50_coral = 7.26; pIC50_GA-MLR = 7.55) displayed notable predicted inhibitory activity, according to both models. These compounds also exhibited conformational and structural stability, as well as a favorable binding profile. Furthermore, these potential drug candidates were found to be non-toxicity and have acceptable pharmacological properties.

Nanotechnology is the science of creating materials at the nanoscale by using various devices, structures, and systems that are often inspired by nature. Micro- and nanoparticles (MPs, NPs) are examples of such materials that have unique properties and can be used as carriers for delivering drugs for different biomedical applications. Chitosan (CS) is a natural polysaccharide that has been widely studied, but it has a problem with low water solubility at neutral or basic pH, which limits its processability. The goal of this work was to use a chemically modified CS with poly(ethylene glycol) methyl ether acrylate (PEGA) to prepare CS micronic and submicronic particles (MPs/NPs) that can deliver different types of antibiotics, respectively, levofloxacin (LEV) and Ciprofloxacin (CIP). The particle preparation procedure employed a double crosslinking method, ionic followed by a covalent, in a water/oil emulsion. The studied process parameters were the precursor concentration, stirring speeds, and amount of ionic crosslinking agent. MPs/NPs were characterized by FT-IR, SEM, light scattering granulometry, and Zeta potential. MPs/NPs were also tested for their water uptake capacity in acidic and neutral pH conditions, and the results showed that they had a pH-dependent behavior. The MPs/NPs were then used to encapsulate two separate drugs, LEV and CIP, and they showed excellent drug loading and release capacity. The MPs/NPs were also found to be safe for cells and blood, which demonstrated their potential as suitable drug delivery systems for biomedical applications.

The objective of this study was to prepare crosslinked epoxy networks containing liquid silicone particles in order to improve their mechanical properties and obtain less brittle materials. Different copolymers were used as compatibilizers. These copolymers vary in their chemical composition and structure. All of the copolymers contain hydrophobic (PDMS sequences) and hydrophilic groups. The effect of their chemical structure and architecture on the morphology of the dispersed phase, and on the final physico-chemical and flexural characteristics of epoxy/silicone blends, was explored. The morphology of crosslinked formulations was studied by scanning electron microscopy (SEM), and the thermal characteristics (glass transition temperature, Tg, and curing exothermic peak) were determined by differential scanning calorimetry (DSC). The experimental results have shown that the average diameter and particle size distribution of silicone particles depend on the chemical structure and architecture of the compatibilizers. One copolymer has been identified as the best compatibilizer, allowing a lower mean diameter and particle size distribution in addition to the best mechanical properties of the final network (less brittle character). This study has consequently evidenced the possibility of creating in situ silicone capsules inside an epoxy network by adding tailored compatibilizers to epoxy/silicone formulations.

Electrospinning (ES) is a versatile and diverse technique to fabricate nano and micro fibers that could be utilized as drug delivery systems. The aim of this research was the fabrication and characterization of drug loaded nanofibrous scaffold produced by single-needle ES using poly(Ɛ-caprolactone) (PCL) and poly(ethylene glycol-400) (PEG) and to investigate the potential of this material as a drug delivery system. A model drug, Ibuprofen (IBU), was used. Ibuprofen is a medicine that is a non-steroidal, anti-inflammatory drug (NSAID). Two concentrations of IBU, 5 wt% and 7 wt%, were incorporated for the ES of PCL and PCL/PEG nanofibers. Characterization of nanofibers was done by using Scanning Electron Microscopy (SEM), Differential Scanning Calorimeter (DSC), Thermogravimetric Analysis (TGA), and Water Contact Angle Measurements. The impact of IBU on nanofibers’ properties such as morphology, diameters, hydrophilicity, and tensile strength was investigated. Finally, the drug release kinetics of IBU from nanofibers was analyzed and their percentage release efficiency of IBU (RE%) was determined by UV-vis spectroscopy during 24 h.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection is a serious global public health threat. The evolving strains of SARS-CoV-2 have reduced the effectiveness of vaccines. Therefore, antiviral drugs against SARS-CoV-2 are urgently needed. The main protease (Mpro) of SARS-CoV-2 is an extremely potent target due to its pivotal role in virus replication and low susceptibility to mutation. In the present study, a quantitative structure–activity relationship (QSAR) study was performed to design new molecules that might have higher inhibitory activity against SARS-CoV-2 Mpro. In this context, a set of 55 dihydrophenanthrene derivatives was used to build two 2D-QSAR models using the Monte Carlo optimization method and the Genetic Algorithm Multi-Linear Regression (GA-MLR) method. From the CORAL QSAR model outputs, the promoters responsible for the increase/decrease in inhibitory activity were extracted and interpreted. The promoters responsible for an increase in activity were added to the lead compound to design new molecules. The GA-MLR QSAR model was used to ensure the inhibitory activity of the designed molecules. For further validation, the designed molecules were subjected to molecular docking analysis and molecular dynamics simulations along with an absorption, distribution, metabolism, excretion, and toxicity (ADMET) analysis. The results of this study suggest that the newly designed molecules have the potential to be developed as effective drugs against SARS-CoV-2.

Biodegradable polymers contain chains that are hydrolytically or enzymatically cleaved, resulting in soluble degradation products. Biodegradability is particularly desired in biomedical applications, in which degradation of the polymer ensures clearance from the body and eliminates the need for retrieval or explant. In this study, a homologues series of poly(ε-caprolactone)-b-poly(ethylene adipate)-b-poly(ε-caprolactone) (PCL-b-PEA-b-PCL) block copolymers, with constant PEA molar mass and different PCL sequence lengths was obtained. The starting point of these copolymers was a dihydroxy-PEA precursor with a molar mass (Mn) of 2500 g/mol. Mn values of the PCL varied between 1000 and 10,000 g/mol. Both the precursors and the copolymers were characterized using different physicochemical methods, such as: NMR, SEC, Maldi-TOFF, DSC, and ATG. The molecular characteristics of the copolymers were in a direct correlation with the sequence length of the PCL. Enzymatic degradability studies were also conducted by using cell-free extract containing Pseudomonas aeruginosa PAO1 for 10 and 21 days, and it appeared that the presence of the PEA central sequence has an important influence on the biodegradability of the copolymer samples. In fact, copolymer PCL7000-PEA2500-PCL7000 had a weight loss of around 50% after 10 days whereas the weight loss of the homopolymer PCL, with a similar Mn of 14,000 g/mol, was only 6%. The results obtained in this study indicate that these copolymer samples can be further used for the preparation of drug delivery systems with modulated biodegradability.

Chitosan (CS) crosslinking has been thoroughly investigated, but the chemical reactions leading to submicronic hydrogel formulations pose problems due to various physical/chemical interactions that limit chitosan processability. The current study employs the chemical modification of chitosan by Michael addition of poly (ethylene glycol) methyl ether acrylate (PEGA) to the amine groups to further prepare chitosan particulate hydrogels (CPH). Thus, modified CS is subjected to a double crosslinking, ionic and covalent, in water/oil emulsion. The studied process parameters are polymer concentration, stirring speed, and quantity of ionic crosslinker. The CPH were structurally and morphologically characterized through infrared spectroscopy, scanning electron microscopy, light scattering granulometry, and zeta potential, showing that modified CS allows better control of dimensional properties and morphology as compared with neat CS. Swelling properties were studied in acidic and neutral pH conditions, showing that pH-dependent behavior was maintained after grafting and double crosslinking. The applicability of the prepared materials was further tested for drug loading and in vitro delivery of levofloxacin (LEV), showing excellent capacity. CPH were found to be cyto- and hemocompatible demonstrating their potential for effective use as a controlled release system for different biomedical applications.

Glaucoma is the second leading cause of blindness in the world. Despite the fact that many treatments are currently available for eye diseases, the key issue that arises is the administration of drugs for long periods of time and the increased risk of inflammation, but also the high cost of eye surgery. Consequently, numerous daily administrations are required, which reduce patient compliance, and even in these conditions, the treatment of eye disease is too ineffective. Micellar polymers are core–shell nanoparticles formed by the self-assembly of block or graft copolymers in selective solvents. In the present study, polymeric micelles (PMs) were obtained by dialysis from smart biocompatible poly(ε-caprolactone)-poly(N-vinylcaprolactam-co-N-vinylpyrrolidone) [PCL-g-P(NVCL-co-NVP)] graft copolymers. Two copolymers with different molar masses were studied, and a good correlation was noted between the micellar sizes and the total degree of polymerisation (DPn) of the copolymers. The micelles formed by Cop A [PCL120-g-P(NVCL507-co-NVP128)], with the lowest total DPn, have a Z-average value of 39 nm, whereas the micellar sizes for Cop B [PCL120-g-P(NVCL1253-co-NVP139)] are around 47 nm. These PMs were further used for the encapsulation of two drugs with applications for the treatment of eye diseases. After the encapsulation of Dorzolamide, a slight increase in micellar sizes was noted, whereas the encapsulation of Indomethacin led to a decrease in these sizes. Using dynamic light scattering, it was proved that both free and drug-loaded PMs are stable for 30 days of storage at 4 °C. Moreover, in vitro biological tests demonstrated that the obtained PMs are both haemo- and cytocompatible and thus can be used for further in vivo tests. The designed micellar system proved its ability to release the encapsulated drugs in vitro, and the results obtained were validated by in vivo tests carried out on experimental animals, which proved its high effectiveness in reducing intraocular pressure.

In this work, maghemite intercalated montmorillonite (γFe2O3-MMT)/polymer nanocomposites loaded with 1 or 2 wt.% of nanofillers were obtained by photopolymerization of difunctional acrylate monomers. The γFe2O3-MMT nanofillers were prepared by a new method based on the in situ formation of maghemite in the interlayer space of Fe-MMT using a three step process. X-ray diffraction (XRD), chemical analysis, TG/DTA and transmission electron microscopy (TEM) characterization of these nanofillers indicated the efficiency of the synthesis. When following the kinetics of the photopolymerization of diacrylate-γFe2O3-MMT nanocomposites using FTIR spectroscopy no significant inhibition effect of the nanofillers was observed at a loading up to 2 wt.%. These innovative nanocomposites exhibit improved mechanical properties compared to the crude polymer.

Ebola virus disease is a deadly pathogenic disease with a fatality rate of 25–90 % as recorded in previous outbreaks. The Ebola Virus glycoprotein (EBOV-GP) plays a crucial role in the entry of viruses into human cells, making it an interesting target for therapeutic discovery. Therefore, inhibiting this protein can directly limit the virus replication and disease progression at an early stage of infection. The present study focuses on the design of novel potent EBOV-GP inhibitors using multiple computational techniques. In this context, two QSAR models were built from a set of 86 amodiaquine derivatives as anti-EBOV-GP using Monte Carlo and genetic algorithm multiple linear regression methods. Both models confirmed their predictive performance with satisfactory statistical parameters of the validation (R2 = 0.9129; Q2 = 0.8848 for the CORAL model and R2 = 0.8848; Q2 = 0.8148 for the GA-MLR model). From the outputs of the CORAL model, the structural fragments responsible for increasing and decreasing the inhibition activity were extracted and interpreted. This molecular information was used to design 26 new potentially safe and active candidate drugs. Molecular docking and dynamics simulations have affirmed the efficacy of the designed compounds. Specifically, compounds D2 (pIC 50_coral = 7.12; pIC 50_GA-MLR = 7.07), D3 (pIC 50_coral = 7.83; pIC 50_GA-MLR = 7.10), and D5 (pIC 50_coral = 7.26; pIC 50_GA-MLR = 7.55) displayed notable predicted inhibitory activity , according to both models. These compounds also exhibited conformational and structural stability, as well as a favorable binding profile. Furthermore, these potential drug candidates were found to be non-toxicity and have acceptable pharmacological properties. [ABSTRACT FROM AUTHOR]

Economic patriotism is generally perceived as an invitation given to economic actors such as the State, consumers or companies, to facilitate national activities. The objective of this article is to show that economic patriotism is not only an instrument in the service of the industrial and commercial power of a State or a vector of its financial power, but that it is also perfectly compatible with the social and environmental dimensions of sustainable development. The concept of economic patriotism, in this respect, was examined in its traditional logics (Mercantilism, List and Keynes) and revisited in the optics of the theory of gift, introduced by Marcel Mauss and in the optics of Durkheim.

An important method used to make medical implants radiologically visible is based on introduction of radiopaque bromine or iodine containing methacrylic monomers. Thus, 2-(2-bromopropionyloxy) propyl methacrylate (BPPM) and 2-(2-bromoisobutyryloxy) propyl methacrylate (BIPM) were synthesized with the aim to use them as radiopaque agents. The free radical initiated copolymerization of BPPM and BIPM with methyl methacrylate (MMA) were performed directly in a thermostatic cell of the NMR spectrometer. The copolymer compositions obtained from ¹H NMR spectra led to the determination of the reactivity ratios (rMMA = 1.08 ± 0.12; rBPPM = 1.01 ± 0.13 and rMMA = 0.95 ± 0.09; rBIPM = 0.95 ± 0.1). The reactivity ratios of these two monomers is similar to that of MMA suggesting that the length of the bromine containing monomers side chain does not affect significantly the reactivity of the methacrylic double bond. From the results we conclude the copolymers to have random structure. [ABSTRACT FROM AUTHOR]