Search

Hundreds of exoplanets between 1-1.8 times the size of the Earth have been discovered on close in orbits. However, these planets show such a diversity in densities that some appear to be made entirely of iron, while others appear to host gaseous envelopes. To test this diversity in composition, we update the masses of 5 rocky exoplanets (HD 93963 A b, Kepler-10 b, Kepler-100 b, Kepler-407 b, and TOI-1444 b) and present the confirmation of a new planet (TOI-1011) using 187 high precision RVs from Gemini/MAROON-X and Keck/KPF. Our updated planet masses suggest compositions closer to that of the Earth than previous literature values for all planets in our sample. In particular, we report that two previously identified ``super-Mercuries'' (Kepler-100 b and HD 93963 A b) have lower masses that suggest less iron-rich compositions. We then compare the ratio of iron to rock-building species to the abundance ratios of those elements in their host stars. These updated planet compositions do not suggest a steep relationship between planet and host star compositions, contradictory to previous results, and suggest that planets and host stars have similar abundance ratios., Comment: Submitted to AJ 09/30/2024

We report the sky-projected spin-orbit angle $\lambda$ for HD 191939 b, the innermost planet in a 6 planet system, using Keck/KPF to detect the Rossiter-McLaughlin (RM) effect. Planet b is a sub-Neptune with radius 3.4 $\pm$ 0.8 R$_{\oplus}$ and mass 10.0 $\pm$ 0.7 M$_{\oplus}$ with an RM amplitude $<$1 ms$^{-1}$. We find the planet is consistent with a well-aligned orbit, measuring $\lambda= \, $ 3.7 $\pm$ 5.0 degrees. Additionally, we place new constraints on the mass and period of the distant super-Jupiter, planet f, finding it to be 2.88 $\pm$ 0.26 $M_J$ on a 2898 $\pm$ 152 day orbit. With these new orbital parameters, we perform a dynamical analysis of the system and constrain the mutual inclination of the non-transiting planet e to be smaller than 12 degrees relative to the plane shared by the inner three transiting planets. Additionally, the further planet f is inclined off this shared plane, the greater the amplitude of precession for the entire inner system, making it increasingly unlikely to measure an aligned orbit for planet b. Through this analysis, we show that this system's wide variety of planets are all well-aligned with the star and nearly co-planar, suggesting that the system formed dynamically cold and flat out of a well-aligned proto-planetary disk, similar to our own solar system., Comment: 11 pages, 4 figures, Accepted for publication in The Astronomical Journal

Characterizing outer companions to hot Jupiters plays a crucial role in deciphering their origins. We present the discovery of a long-period giant planet, HD 118203 c ($m_{c}=11.79^{+0.69}_{-0.63}\ \mathrm{M_{J}}$, $a_{c}=6.28^{+0.10}_{-0.11}$ AU) exterior to a close-in eccentric hot Jupiter HD 118203 b ($P_{b}=6.135\ \mathrm{days}$, $m_{b}=2.14\pm{0.12}\ \mathrm{M_{J}}$, $r_{b}=1.14\pm{0.029}\ \mathrm{R_{J}}$, $e_{b}=0.31\pm{0.007}$) based on twenty-year radial velocities. Using Rossiter-McLaughlin (RM) observations from the Keck Planet Finder (KPF), we measured a low sky-projected spin-orbit angle $\lambda_{b}=-11^{\circ}.7^{+7.6}_{-10.0}$ for HD 118203 b and detected stellar oscillations in the host star, confirming its evolved status. Combining the RM observation with the stellar inclination measurement, we constrained the true spin-orbit angle of HD 118203 b as $\Psi_{b}<33^{\circ}.5\ (2\sigma)$, indicating the orbit normal of the hot Jupiter nearly aligned with the stellar spin axis. Furthermore, by combining radial velocities and Hipparcos-Gaia astrometric acceleration, we constrained the line-of-sight mutual inclination between the hot Jupiter and the outer planet to be $9^{\circ}.8^{+16.2}_{-9.3}$ at $2\sigma$ level. HD 118203 is one of first hot Jupiter systems where both the true spin-orbit angle of the hot Jupiter and the mutual inclination between inner and outer planets have been determined. Our results are consistent with a system-wide alignment, with low mutual inclinations between the outer giant planet, the inner hot Jupiter, and the host star. This alignment, along with the moderate eccentricity of HD 118203 c, implies that the system may have undergone coplanar high-eccentricity tidal migration. Under this framework, our dynamical analysis suggests an initial semi-major axis of 0.3 to 3.2 AU for the proto-hot Jupiter., Comment: 30 pages, 12 figures, accepted by AJ

We introduce the OATMEAL survey, an effort to measure the obliquities of stars with transiting brown dwarf companions. We observed a transit of the close-in ($P_{\rm orb} = 1.74 \,$ days) brown dwarf GPX-1 b using the Keck Planet Finder (KPF) spectrograph to measure the sky-projected angle between its orbital axis and the spin axis of its early F-type host star ($\lambda$). We measured $\lambda = 6.88 \pm 1.72 ^\circ$ (with additional unquantified systematic uncertainty), suggesting an orbit that is prograde and well aligned with the stellar equator. Hot Jupiters around early F stars are frequently found to have highly misaligned orbits, with polar and retrograde orbits being commonplace. It has been theorized that these misalignments stem from dynamical interactions, such as von Zeipel-Kozai-Lidov cycles, and are retained over long timescales due to weak tidal dissipation in stars with radiative envelopes. By comparing GPX-1 to similar systems under the frameworks of different tidal evolution theories, we argued that the rate of tidal dissipation is too slow to have re-aligned the system. This suggests that GPX-1 may have arrived at its close-in orbit via coplanar high-eccentricity migration or migration through an aligned protoplanetary disk. Our result for GPX-1 is one of few measurements of the obliquity of a star with a transiting brown dwarf. By enlarging the number of such measurements and comparing them with hot Jupiter systems, we will more clearly discern the differences between the mechanisms that dictate the formation and evolution of both classes of objects., Comment: 8 pages, 4 figures

Asteroseismology of dwarf stars cooler than the Sun is very challenging due to the low amplitudes and rapid timescales of oscillations. Here, we present the asteroseismic detection of solar-like oscillations at 4-minute timescales ($\nu_{\mathrm{max}}\sim4300\mu$Hz) in the nearby K-dwarf $\sigma$ Draconis using extreme precision Doppler velocity observations from the Keck Planet Finder and 20-second cadence photometry from NASA's Transiting Exoplanet Survey Satellite. The star is the coolest dwarf star to date with both velocity and luminosity observations of solar-like oscillations, having amplitudes of $5.9\pm0.8\,$cm$\,\text{s}^{-1}$ and $0.8\pm0.2$ ppm, respectively. These measured values are in excellent agreement with established luminosity-velocity amplitude relations for oscillations and provide further evidence that mode amplitudes for stars with $T_{\mathrm{eff}}<\,5500\,$K diminish in scale following a $(L/M)^{1.5}$ relation. By modeling the star's oscillation frequencies from photometric data, we measure an asteroseismic age of $4.5\pm0.9\,\rm{(ran)} \pm 1.2\,\rm{(sys)}$ Gyr. The observations demonstrate the capability of next-generation spectrographs and precise space-based photometry to extend observational asteroseismology to nearby cool dwarfs, which are benchmarks for stellar astrophysics and prime targets for directly imaging planets using future space-based telescopes., Comment: Accepted for publication in The Astrophysical Journal

We present the first spectroscopic transit results from the newly commissioned Keck Planet Finder on the Keck-I telescope at W. M. Keck Observatory. We observed a transit of KELT-18 b, an inflated ultra-hot Jupiter orbiting a hot star ($T_\text{eff} = 6670$ K) with a binary stellar companion. By modeling the perturbation to the measured cross correlation functions using the Reloaded Rossiter-McLaughlin technique, we derived a sky projected obliquity of $\lambda = -94.8 \pm 0.7$ deg ($\psi = 93.8_{-1.8}^{+1.6}$ deg for isotropic $i_\star$). The data are consistent with an extreme stellar differential rotation ($\alpha = 0.9$), though a more likely explanation is moderate center-to-limb variations of the emergent stellar spectrum. We see additional evidence for the latter from line widths increasing towards the limb. Using loose constraints on the stellar rotation period from observed variability in the available TESS photometry, we were able to constrain the stellar inclination and thus the true 3D stellar obliquity to $\psi = 91.7_{-1.8}^{+2.2}$ deg. KELT-18 b could have obtained its polar orbit through high-eccentricity migration initiated by Kozai-Lidov oscillations induced by the binary stellar companion KELT-18 B, as the two likely have a large mutual inclination as evidenced by Gaia astrometry. KELT-18 b adds another data point to the growing population of close-in polar planets, particularly around hot stars., Comment: 17 pages, 8 figures, submitted to AJ (in revision)

The orbits of close-in exoplanets provide clues to their formation and evolutionary history. Many close-in exoplanets likely formed far out in their protoplanetary disks and migrated to their current orbits, perhaps via high-eccentricity migration (HEM), a process that can also excite obliquities. A handful of known exoplanets are perhaps caught in the act of HEM, as they are observed on highly eccentric orbits with tidal circularization timescales shorter than their ages. One such exoplanet is Kepler-1656 b, which is also the only known non-giant exoplanet (<100 $M_\oplus$) with an extreme eccentricity (e=0.84). We measured the sky-projected obliquity of Kepler-1656 b by observing the Rossiter-McLaughlin effect during a transit with the Keck Planet Finder. Our data are consistent with an aligned orbit, but are also consistent with moderate misalignment with $\lambda < 50$ deg at 95% confidence, with the most likely solution of $35^{+14.9}_{-21.6}$ deg. A low obliquity would be an unlikely outcome of most eccentricity-exciting scenarios, but we show that the properties of the outer companion in the system are consistent with the coplanar HEM mechanism. Alternatively, if the system is not relatively coplanar (<20 deg mutual inclination), Kepler-1656 b may be presently at a rare snapshot of long-lived eccentricity oscillations that do not induce migration. Kepler-1656 b is only the fourth exoplanet with e>0.8 to have its obliquity constrained; expanding this population will help establish the degree to which orbital misalignment accompanies migration. Future work that constrains the mutual inclinations of outer perturbers will be key for distinguishing plausible mechanisms., Comment: 11 pages, 5 figures, accepted to ApJL

TOI-6255~b (GJ 4256) is an Earth-sized planet (1.079$\pm0.065$ $R_\oplus$) with an orbital period of only 5.7 hours. With the newly commissioned Keck Planet Finder (KPF) and CARMENES spectrographs, we determined the planet's mass to be 1.44$\pm$0.14 $M_{\oplus}$. The planet is just outside the Roche limit, with $P_{\rm orb}/P_{\rm Roche}$ = 1.13 $\pm0.10$. The strong tidal force likely deforms the planet into a triaxial ellipsoid with a long axis that is $\sim$10\% longer than the short axis. Assuming a reduced stellar tidal quality factor $Q_\star^\prime \approx10^7$, we predict that tidal orbital decay will cause TOI-6255 to reach the Roche limit in roughly 400 Myr. Such tidal disruptions may produce the possible signatures of planet engulfment that have been on stars with anomalously high refractory elemental abundances compared to its conatal binary companion. TOI-6255 b is also a favorable target for searching for star-planet magnetic interactions, which might cause interior melting and hasten orbital decay. TOI-6255 b is a top target (Emission Spectroscopy Metric of about 24) for phase curve observations with the James Webb Space Telescope., Comment: 18 pages, 7 figures, 5 tables, accepted to AAS Journals. The first RV mass measurement from the Keck Planet Finder

We present the design of SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) a new 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. SCALES enables low-resolution (R~50) spectroscopy, as well as medium-resolution (R~4,000) spectroscopy with the goal of discovering and characterizing cold exoplanets that are brightest in the thermal infrared. Additionally, SCALES has a 12x12" field-of-view imager that will be used for general adaptive optics science at Keck. We present SCALES's specifications, its science case, its overall design, and simulations of its expected performance. Additionally, we present progress on procuring, fabricating and testing long lead-time components., Comment: 19 pages, 12 Figures, SPIE Astronomical Telescopes + Instrumentation, (#12184-18), 2022, Montreal, Canada

SCALES (Santa Cruz Array of Lenslets for Exoplanet Spectroscopy) is a 2-5 micron high-contrast lenslet integral-field spectrograph (IFS) driven by exoplanet characterization science requirements and will operate at W. M. Keck Observatory. Its fully cryogenic optical train uses a custom silicon lenslet array, selectable coronagraphs, and dispersive prisms to carry out integral field spectroscopy over a 2.2 arcsec field of view at Keck with low ($<300$) spectral resolution. A small, dedicated section of the lenslet array feeds an image slicer module that allows for medium spectral resolution ($5000-10 000$), which has not been available at the diffraction limit with a coronagraphic instrument before. Unlike previous IFS exoplanet instruments, SCALES is capable of characterizing cold exoplanet and brown dwarf atmospheres ($<600$ K) at bandpasses where these bodies emit most of their radiation while capturing relevant molecular spectral features., Comment: 24 pages, 13 figures, SPIE Astronomical Instruments and Telescopes 2020 conference

Exoplanets are abundant in our galaxy and yet characterizing them remains a technical challenge. Solar System planets provide an opportunity to test the practical limitations of exoplanet observations with high signal-to-noise data that we cannot access for exoplanets. However, data on Solar System planets differ from exoplanets in that Solar System planets are spatially resolved while exoplanets are unresolved point-sources. We present a novel instrument designed to observe Solar System planets as though they are exoplanets, the Planet as Exoplanet Analog Spectrograph (PEAS). PEAS consists of a dedicated 0.5-m telescope and off-the-shelf optics, located at Lick Observatory. PEAS uses an integrating sphere to disk-integrate light from the Solar System planets, producing spatially mixed light more similar to the spectra we can obtain from exoplanets. This paper describes the general system design and early results of the PEAS instrument., Comment: SPIE Astronomical Telescopes & Instrumentation 2020 Proceedings (11447-153), 9 pages, 9 figures

We report initial performance results emerging from 600 hours of observations with the Automated Planet Finder (APF) telescope and Levy Spectrometer located at UCO/Lick Observatory. We have obtained multiple spectra of 80 G, K and M-type stars, which comprise 4,954 individual Doppler radial velocity (RV) measurements with a median internal uncertainty of 1.35 ms$^{-1}$. We find a strong, expected correlation between the number of photons accumulated in the 5000-6200$\AA$ iodine region of the spectrum, and the resulting internal uncertainty estimates. Additionally, we find an offset between the population of G and K stars and the M stars within the data set when comparing these parameters. As a consequence of their increased spectral line densities, M-type stars permit the same level of internal uncertainty with 2x fewer photons than G-type and K-type stars. When observing M stars, we show that the APF/Levy has essentially the same speed-on-sky as Keck/HIRES for precision RVs. In the interest of using the APF for long-duration RV surveys, we have designed and implemented a dynamic scheduling algorithm. We discuss the operation of the scheduler, which monitors ambient conditions and combines on-sky information with a database of survey targets to make intelligent, real-time targeting decisions., Comment: 27 pages, 10 figures

A Cassegrain mounted adaptive optics instrument presents unique challenges for opto-mechanical design. The flexure and temperature tolerances for stability are tighter than those of seeing limited instruments. This criteria requires particular attention to material properties and mounting techniques. This paper addresses the mechanical designs developed to meet the optical functional requirements. One of the key considerations was to have gravitational deformations, which vary with telescope orientation, stay within the optical error budget, or ensure that we can compensate with a steering mirror by maintaining predictable elastic behavior. Here we look at several cases where deformation is predicted with finite element analysis and Hertzian deformation analysis and also tested. Techniques used to address thermal deformation compensation without the use of low CTE materials will also be discussed., Comment: 14 pages, 14 figures, 4 tables. Presented at SPIE Astronomical Telescopes + Instrumentation conference, paper 9148-119

A new high-order adaptive optics system is now being commissioned at the Lick Observatory Shane 3-meter telescope in California. This system uses a high return efficiency sodium beacon and a combination of low and high-order deformable mirrors to achieve diffraction-limited imaging over a wide spectrum of infrared science wavelengths covering 0.8 to 2.2 microns. We present the design performance goals and the first on-sky test results. We discuss several innovations that make this system a pathfinder for next generation AO systems. These include a unique woofer-tweeter control that provides full dynamic range correction from tip/tilt to 16 cycles, variable pupil sampling wavefront sensor, new enhanced silver coatings developed at UC Observatories that improve science and LGS throughput, and tight mechanical rigidity that enables a multi-hour diffraction- limited exposure in LGS mode for faint object spectroscopy science., Comment: 11 pages, 10 figures. Presented at SPIE Astronomical Telescopes + Instrumentation conference, paper 9148-76

We describe the design and first-light early science performance of the Shane Adaptive optics infraRed Camera-Spectrograph (ShARCS) on Lick Observatory's 3-m Shane telescope. Designed to work with the new ShaneAO adaptive optics system, ShARCS is capable of high-efficiency, diffraction-limited imaging and low-dispersion grism spectroscopy in J, H, and K-bands. ShARCS uses a HAWAII-2RG infrared detector, giving high quantum efficiency (>80%) and Nyquist sampling the diffraction limit in all three wavelength bands. The ShARCS instrument is also equipped for linear polarimetry and is sensitive down to 650 nm to support future visible-light adaptive optics capability. We report on the early science data taken during commissioning., Comment: 9 pages, 7 figures. Presented at SPIE Astronomical Telescopes + Instrumentation conference, paper 9148-118

The Automated Planet Finder (APF) is a facility purpose-built for the discovery and characterization of extrasolar planets through high-cadence Doppler velocimetry of the reflex barycentric accelerations of their host stars. Located atop Mt. Hamilton, the APF facility consists of a 2.4-m telescope and its Levy spectrometer, an optical echelle spectrometer optimized for precision Doppler velocimetry. APF features a fixed format spectral range from 374 nm - 970 nm, and delivers a "Throughput" (resolution * slit width product) of 114,000 arc-seconds, with spectral resolutions up to 150,000. Overall system efficiency (fraction of photons incident on the primary mirror that are detected by the science CCD) on blaze at 560 nm in planet-hunting mode is 15%. First-light tests on the RV standard stars HD 185144 and HD 9407 demonstrate sub-meter per second precision (RMS per observation) held over a 3-month period. This paper reviews the basic features of the telescope, dome, and spectrometer, and gives a brief summary of first-light performance., Comment: Accepted at PASP. Version with full resolution available at http://oklo.org/Vogt_APF_2014.pdf

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has been under development at JPL for the past four years. During this time, a dedicated ground data-processing system has been designed and implemented to store and process the large amounts of data expected. This paper reviews the objectives of this ground data-processing system and describes the hardware. An outline of the data flow through the system is given, and the software and incorporated algorithms developed specifically for the systematic processing of AVIRIS data are described.

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has been under development at JPL for the past four years. During this time, a dedicated ground data-processing system has been designed and implemented to store and process the large amounts of data expected. This paper reviews the objectives of this ground data-processing system and describes the hardware. An outline of the data flow through the system is given, and the software and incorporated algorithms developed specifically for the systematic processing of AVIRIS data are described.