342 results on '"Deconinck J"'
Search Results
2. A modelling approach on the impact of an oxide layer on the hydrogen permeation through iron membranes in the Devanathan-Stachurski cell
3. Numerical modeling of oxygen mass transfer in a wire wrapped fuel assembly under flowing lead bismuth eutectic
4. Capillary water absorption in cracked and uncracked mortar – A comparison between experimental study and finite element analysis
5. Clay mineralogical and geochemical expressions of the “Late Campanian Event” in the Aquitaine and Paris basins (France): Palaeoenvironmental implications
6. The influence of the capillary size and shape on the readings of the electrochemical microcapillary technique: a parametric study by means of the multi-ion modeling
7. An integrated modeling approach for atmospheric corrosion in presence of a varying electrolyte film
8. Influence of the electrolyte film thickness and NaCl concentration on the oxygen reduction current on platinum
9. A Modified Multiphysics model for Lithium-Ion batteries with a LixNi1/3Mn1/3Co1/3O2 electrode
10. Novel use of a micro-optode in overcoming the negative influence of the amperometric micro-probe on localized corrosion measurements
11. A mass transfer correlation for packed bed of lead oxide spheres in flowing lead–bismuth eutectic at high Péclet numbers
12. Simulated and measured response of oxygen SECM-measurements in presence of a corrosion process
13. Temperature dependence of dissolution rate of a lead oxide mass exchanger in lead–bismuth eutectic
14. Multi-ion transport and reaction model used to improve the understanding of local current density measurements in presence of concentration gradients around a point current source
15. Validation of predictive model for galvanic corrosion under thin electrolyte layers: An application to aluminium 2024-CFRP material combination
16. Numerical modeling of oxygen mass transfer from PbO spheres packed bed to liquid lead bismuth eutectic: A venturi-type PbO mass exchanger
17. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part III: Experimental validation
18. Simulation of nano-second pulsed phenomena in electrochemical micromachining processes – Effects of the signal and double layer properties
19. Steady-state analysis of the nickel oxide in neutral and weakly alkaline solutions
20. Multi-Ion and Temperature Dependent Numerical Simulation of Electrochemical Machining
21. Time-Efficient Simulations of Nano-Pulsed Electrochemical Micro- Machining
22. A transient multi-ion transport model for galvanized steel corrosion protection
23. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part II: Numerical simulation
24. Influence of the applied potential and pH on the steady-state behavior of the iron oxide
25. Modeling localized aluminum alloy corrosion in chloride solutions under non-equilibrium conditions: Steps toward understanding pitting initiation
26. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part I: Theoretical basis
27. Study of the effects of heat removal on the copying accuracy of the electrochemical machining process
28. A new approach for shape optimization of resistors with complex geometry
29. A novel pulse shortcut strategy for simulating nano-second pulse electrochemical micro-machining
30. A Numerical Model Coupling Galvanic Corrosion and Ohmic Voltage Drop in Buried Pipelines
31. Efficient algebraic multigrid for migration–diffusion–convection–reaction systems arising in electrochemical simulations
32. On the modeling of electrochemical systems with simultaneous gas evolution. Case study: The zinc deposition mechanism
33. Electrochemical Cell Design
34. Diagenetic and detrital influences on clay mineralogy and carbon isotope geochemistry of Campanian–Maastrichtian sediments in the Tremp-Graus Basin (southern Pyrenees, Spain)
35. The electrochemistry in 316SS crevices exposed to PWR-relevant conditions
36. Crack propagation rate modelling for 316SS exposed to PWR-relevant conditions
37. Experimental study and modelling of anodizing of aluminium in a wall-jet electrode set-up in laminar and turbulent regime
38. Time averaged calculations in pulse electrochemical machining, using a strongly non-linear model
39. Turbulent fluid flow and electrochemical mass transfer in an annular duct with an obstruction
40. Time-averaged concentration calculations in pulse electrochemical machining, spectral approach
41. Time averaged temperature calculations in pulse electrochemical machining, spectral approach
42. 3D Numerical Computation of the Induced Potential Distribution on Buried Pipelines by Neighbour HV Lines Working on Normal and Fault Conditions
43. Time averaged concentration calculations in pulse electrochemical machining
44. Time averaged temperature calculations in pulse electrochemical machining, part II: numerical simulation
45. Time averaged temperature calculations in pulse electrochemical machining. Part I: theoretical basis
46. Calculation of temperature transients in pulse electrochemical machining (PECM)
47. Numerical model for predicting the efficiency behaviour during pulsed electrochemical machining of steel in NaNO3
48. Finite element calculation of crack propagation in type 304 stainless steel in diluted sulphuric acid solutions
49. Laminar and turbulent mass transfer simulations in a parallel plate reactor
50. Modelling of an Aluminium Alloy at the Mesoscale: Crevice Corrosion
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.