Search

Hyperspectral imaging systems (HSIs) are becoming widespread in the mining industry for mineral classification. The spectral features detectable from near infrared to long-wave infrared make HSIs a potentially efficient tool for exploration, clay mapping, and leach pad modeling. However, the redundancy of hyperspectral data makes the analysis of hyperspectral images complicated and slow. Many researchers have proposed different algorithms and strategies to speed up processing and increase accuracy. These procedures rely on endmember extraction as one of the critical steps. However, no one has tested whether endmember extraction actually improves accuracy under all circumstances. Eliminating endmember extraction, if possible, would speed up the analysis of hyperspectral data. This study tested whether endmember extraction improves the accuracy and efficiency of mapping materials at leach pads, which are among the most complicated situations in mining environments. We compared the accuracy of abundance maps produced with fully constrained least squares (FCLS) (a) with endmember extraction by N-FINDR and (b) without endmember extraction, using a spectral library instead. The results from endmember extraction showed lower accuracy than the results from using a spectral library, probably because the spectral data were noisy and the scanned materials were mixtures. The application of FCLS to hyperspectral images provides useful information for metallurgists. The abundance maps showed that kaolinite, muscovite, and precipitation (hexahydrite and pickeringite) were the dominant minerals on the leach pad. The abundance maps of pipes and precipitation can be used to monitor leaching conditions. Lixiviant ponds mapped out in the abundance map of water can indicate saturation. This technique can also detect organic leakage and agglomeration effectiveness, but it will need different wavelength ranges and more future study. This paper also suggests best practices for using hyperspectral imaging systems to map leach pads.

Background: The ulnar collateral ligament (UCL) of the elbow is subject to repetitive stress in overhead throwing athletes. This can lead to morphologic changes at the bony attachments of the UCL and hypertrophy of the sublime tubercle. The purpose of this case series is to describe the surgical details and clinical outcomes of a series of competitive baseball pitchers with hypertrophic sublime tubercles who underwent UCL reconstruction (UCLR). Methods: All baseball pitchers who were treated for UCL injuries with significant hypertrophy of the sublime tubercle on preoperative imaging were included in the series. Clinical history, preoperative imaging, intraoperative findings during UCLR, and postoperative outcomes measured with the Conway scale were described. Results: Ten players (average age of 22.9 years [range 13-39]) were included (average follow-up 20.4 months [range 3-38 months]). Five patients also had symptoms of ulnar nerve compression, with 4 requiring transposition at the time of ULCR and 1 at 3 months postoperatively. Bony hypertrophy of the sublime tubercle was confirmed intraoperatively in all cases and excised before UCLR with the docking technique. Of the 7 patients with at least 12-month follow-up postoperatively, 6 had excellent outcomes, and 1 had a fair outcome. Conclusion: Although UCLR in the setting of hypertrophic sublime tubercle can be more complex than typical UCLR, excellent outcomes are achievable with preoperative recognition and surgical planning.

Herpes simplex esophagitis (HSE) represents a rare entity in immunocompetent patients and has infrequently been described in association with eosinophilic esophagitis (EoE). Causality in this rare association remains a debated topic. We present a case of HSE occurring in an immunocompetent adult with EoE and review the literature in support of EoE induced mucosal disruption predisposing to increased risk of HSE.

EZH2 phosphorylation by CDK2 promotes progression of triple-negative breast cancer (TNBC). Here, the authors show that this signaling axis downregulates ERα, and thus combinatorial blockade of CDK2 and EZH2 sensitizes TNBC cells to tamoxifen.

Abstract This work documents the first version of the U.S. Department of Energy (DOE) new Energy Exascale Earth System Model (E3SMv1). We focus on the standard resolution of the fully coupled physical model designed to address DOE mission‐relevant water cycle questions. Its components include atmosphere and land (110‐km grid spacing), ocean and sea ice (60 km in the midlatitudes and 30 km at the equator and poles), and river transport (55 km) models. This base configuration will also serve as a foundation for additional configurations exploring higher horizontal resolution as well as augmented capabilities in the form of biogeochemistry and cryosphere configurations. The performance of E3SMv1 is evaluated by means of a standard set of Coupled Model Intercomparison Project Phase 6 (CMIP6) Diagnosis, Evaluation, and Characterization of Klima simulations consisting of a long preindustrial control, historical simulations (ensembles of fully coupled and prescribed SSTs) as well as idealized CO2 forcing simulations. The model performs well overall with biases typical of other CMIP‐class models, although the simulated Atlantic Meridional Overturning Circulation is weaker than many CMIP‐class models. While the E3SMv1 historical ensemble captures the bulk of the observed warming between preindustrial (1850) and present day, the trajectory of the warming diverges from observations in the second half of the twentieth century with a period of delayed warming followed by an excessive warming trend. Using a two‐layer energy balance model, we attribute this divergence to the model's strong aerosol‐related effective radiative forcing (ERFari+aci = −1.65 W/m2) and high equilibrium climate sensitivity (ECS = 5.3 K).

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Background: the relatively high concentration of polyunsaturated fatty acid in yellow corn may reduce the quality of pork fat, but feeding barley instead of yellow corn may increase pork quality. Objective: to determine the effects of feeding graded levels of barley on performance, carcass composition, and pork quality of finishing pigs. Methods: in experiment 1, diets containing 0, 20, 40, 60, or 80% barley were fed to pigs (initial BW: 67.9 kg) for 8 weeks. In experiment 2, a diet containing 60% barley was fed to pigs for 0, 2, 4, 6, or 8 weeks prior to slaughter. Results: feeding diets with increasing levels of barley resulted in a linear decrease in daily gain (p

Ultrafast angle–resolved XUV photoemission reveals the time- and momentum-dependent electronic structure of 1T–TaS2, a hybrid Mott and charge-density-wave insulator. Both electronic orderings melt well before the lattice responds, suggesting that electronic correlations play a role not just in the Mott localization but in the CDW ordering as well.

This work documents the first version of the U.S. Department of Energy (DOE) new Energy Exascale Earth System Model (E3SMv1). We focus on the standard resolution of the fully coupled physical model designed to address DOE mission-relevant water cycle questions. Its components include atmosphere and land (110-km grid spacing), ocean and sea ice (60 km in the midlatitudes and 30 km at the equator and poles), and river transport (55 km) models. This base configuration will also serve as a foundation for additional configurations exploring higher horizontal resolution as well as augmented capabilities in the form of biogeochemistry and cryosphere configurations. The performance of E3SMv1 is evaluated by means of a standard set of Coupled Model Intercomparison Project Phase 6 (CMIP6) Diagnosis, Evaluation, and Characterization of Klima simulations consisting of a long preindustrial control, historical simulations (ensembles of fully coupled and prescribed SSTs) as well as idealized CO2 forcing simulations. The model performs well overall with biases typical of other CMIP-class models, although the simulated Atlantic Meridional Overturning Circulation is weaker than many CMIP-class models. While the E3SMv1 historical ensemble captures the bulk of the observed warming between preindustrial (1850) and present day, the trajectory of the warming diverges from observations in the second half of the twentieth century with a period of delayed warming followed by an excessive warming trend. Using a two-layer energy balance model, we attribute this divergence to the model's strong aerosol-related effective radiative forcing (ERFari+aci = −1.65 W/m2) and high equilibrium climate sensitivity (ECS = 5.3 K).

Hyperspectral imaging systems (HSIs) are becoming widespread in the mining industry for mineral classification. The spectral features detectable from near infrared to long-wave infrared make HSIs a potentially efficient tool for exploration, clay mapping, and leach pad modeling. However, the redundancy of hyperspectral data makes the analysis of hyperspectral images complicated and slow. Many researchers have proposed different algorithms and strategies to speed up processing and increase accuracy. These procedures rely on endmember extraction as one of the critical steps. However, no one has tested whether endmember extraction actually improves accuracy under all circumstances. Eliminating endmember extraction, if possible, would speed up the analysis of hyperspectral data. This study tested whether endmember extraction improves the accuracy and efficiency of mapping materials at leach pads, which are among the most complicated situations in mining environments. We compared the accuracy of abundance maps produced with fully constrained least squares (FCLS) (a) with endmember extraction by N-FINDR and (b) without endmember extraction, using a spectral library instead. The results from endmember extraction showed lower accuracy than the results from using a spectral library, probably because the spectral data were noisy and the scanned materials were mixtures. The application of FCLS to hyperspectral images provides useful information for metallurgists. The abundance maps showed that kaolinite, muscovite, and precipitation (hexahydrite and pickeringite) were the dominant minerals on the leach pad. The abundance maps of pipes and precipitation can be used to monitor leaching conditions. Lixiviant ponds mapped out in the abundance map of water can indicate saturation. This technique can also detect organic leakage and agglomeration effectiveness, but it will need different wavelength ranges and more future study. This paper also suggests best practices for using hyperspectral imaging systems to map leach pads. [ABSTRACT FROM AUTHOR]

The robust control of genotoxic N -nitrosamine (NA) impurities is an important safety consideration for the pharmaceutical industry, especially considering recent drug product withdrawals. NAs belong to the 'cohort of concern' list of genotoxic impurities (ICH M7) because of the mutagenic and carcinogenic potency of this chemical class. In addition, regulatory concerns exist regarding the capacity of the Ames test to predict the carcinogenic potential of NAs because of historically discordant results. The reasons postulated to explain these discordant data generally point to aspects of Ames test study design. These include vehicle solvent choice, liver S9 species, bacterial strain, compound concentration, and use of pre-incubation versus plate incorporation methods. Many of these concerns have their roots in historical data generated prior to the harmonization of Ames test guidelines. Therefore, we investigated various Ames test assay parameters and used qualitative analysis and quantitative benchmark dose modelling to identify which combinations provided the most sensitive conditions in terms of mutagenic potency. Two alkyl-nitrosamines, N -nitrosodimethylamine (NDMA) and N -nitrosodiethylamine (NDEA) were studied. NDMA and NDEA mutagenicity was readily detected in the Ames test and key assay parameters were identified that contributed to assay sensitivity rankings. The pre-incubation method (30-min incubation), appropriate vehicle (water or methanol), and hamster-induced liver S9, alongside Salmonella typhimurium strains TA100 and TA1535 and Escherichia coli strain WP2uvrA(pKM101) provide the most sensitive combination of assay parameters in terms of NDMA and NDEA mutagenic potency in the Ames test. Using these parameters and further quantitative benchmark dose modelling, we show that N -nitrosomethylethylamine (NMEA) is positive in Ames test and therefore should no longer be considered a historically discordant NA. The results presented herein define a sensitive Ames test design that can be deployed for the assessment of NAs to support robust impurity qualifications. [ABSTRACT FROM AUTHOR]

The coupled amide-I vibrational modes in peptide systems such as fibrillar aggregates can often provide a wealth of structural information, although the associated spectra can be difficult to interpret. Using exciton scattering calculations, we characterized the polarization selective 2DIR peak patterns for cross-α peptide fibrils, a challenging system given the similarity between the monomeric and fibrillar structures, and interpret the results in light of recently collected 2D data on the cross-α peptide phenol soluble modulin α3. We find that stacking of α-helices into fibrils couples the bright modes across helical subunits, generating three new Bloch-like extended excitonic states that we designate A⊥, E∥, and E⊥. Coherent superpositions of these states in broadband 2DIR simulations lead to characteristic signals that are sensitive to fibril length and match the experimental 2DIR spectra. [ABSTRACT FROM AUTHOR]