Search

PLCs are extensively used for the discrete and continuous control of non-intelligent shop-floor devices. The debugging phase of ladder logic development for PLCs is very cumbersome and difficult. Most often on-line debugging which is expensive and time consuming is used for debugging. Computer simulation techniques applied to this problem, leaves much to be desired. The best technique developed for ladder logic debugging is the use of ladder-based triggers. A ladder-based trigger is a function which suspends simulation execution whenever a vector of ladder variables equates to a vector of predefined states. System-based debugging facilities are those which aid a programmer in error detection at the system level. System based triggers will identify system faults and set traps within a simulation model to detect their occurrence. This approach will provide information necessary for a faster correction of the ladder logic once a trigger is activated. The system based debugging tool developed is capable of scanning a boolean representation of a PLC program with input coils, counters, timers, "and" conditions, "or conditions and output coils. The program provides the following facilities: 1. Graphics programs can be attached to the simulation program for better visualization. 2. The simulation program allows interactive control over the test bed developed. In a non-interactive simulation it can be executed in a timed sequential mode or random mode. 3. Triggers can be set by the user depending on the conditions that are to be monitored. 4. The program stops execution whenever a trigger is activated. 5. The program provides a trace of the output that caused the trigger and also of the inputs to this output, along with their state values at the time of activation. The use of system based techniques and graphics in the debugging of PLC ladder logic is demonstrated. Further the use of an object oriented frame work in the development of the debugging software is also demonstrated. Master of Science

Computer simulation modeling is currently the most flexible method of manufacturing system analysis. Unfortunately, current simulation frameworks do not support the modular specification of homogeneous and heterogeneuos models. A Simulation Program Generator (SPG) for prototyping heterogeneuos simulation models is developed. Objects in the model represent elements within a flexible assembly system. These elements are the robot, the conveyor, the part, the schedule plan and the robot program. These objects were modeled using the GIBSS simulation framework. A model base and an user interface is developed to allow the construction and execution of simulation models. Instances of the objects are created and stored into the model base. These are retrieved later to construct a model The user interface is provided with an extensive set of tools for model creation and execution. Icons. representing objects, are selected and placed on the terminal screen and then connected together by interaction lines to create the complete model. The attributes of the objects can be altered and viewed on their respective panes. The SPG is a step forward in the development of computer-aided manufacturing system design environments for prototyping heterogeneous models. It allows the rapid generation and execution of simulation models. Master of Science