Search

The band dispersion in channels with an orderly pillar structure with a pressure-driven liquid flow was determined. Several channels with different geometries were etched in a silicon wafer and enclosed by a glass wafer. The microchannels obtained had the same depth, pillar disposition, and overall porosity, but different pillar diameters and channel widths. The broadening of narrow bands of a fluorescent sample solution flowing through the channels was measured using a fluorescence microscope. It was shown that the peak dispersion occurring in the channels can be much lower than in conventional packed columns, as a consequence of the higher degree of order of the solid structure. Reduced plate heights of ~0.2 could be obtained for (nonretained) bands. No correlation was found between the aspect ratio (the ratio of the channel width and the pillar diameter) and band dispersion. The geometrical construction of the sidewall region was shown to play a critical role for channel performance. A good agreement was found with predictions for the optimal sidewall geometry obtained previously with simulation studies.

The majority of commercially available monoclonal antibody (mAb) formulations are stabilized with one of three non-ionic surfactants: polysorbate 20 (PS20), polysorbate 80 (PS80), or poloxamer 188 (P188). All three surfactants are susceptible to degradation, which can result in functionality loss and subsequent protein aggregation or free fatty acid particle formation. Consequently, quantitative, and qualitative analysis of surfactants is an integral part of formulation development, stability, and batch release testing. Due to the heterogeneous nature of both polysorbates and poloxamer, online isolation of all the compounds from the protein and other excipients that may disturb the subsequent liquid chromatography with charged aerosol detection (LC-CAD) analysis poses a challenge. Herein, we present an analytical method employing LC-CAD, utilizing a combination of anion and cation exchange columns to completely remove proteins online before infusing the isolated surfactant onto a reversed-phase column. The method allows high throughput analysis of polysorbates within 8 minutes and poloxamer 188 within 12 minutes, providing a separation of the surfactant species of polysorbates (unesterified species, lower esters, and higher esters) and poloxamer 188 (early eluters and main species). Accuracy and precision assessed according to the International Council for harmonisation (ICH) guideline were 96 - 109 % and ≤1 % relative standard deviation respectively for all three surfactants in samples containing up to 110 mg/mL mAb. Subsequently, the method was effectively applied to quantify polysorbate 20 and polysorbate 80 in nine commercial drug products with mAb concentration of up to 180 mg/mL., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Polysorbate 80 is widely used as a formulation component in biopharmaceutical drug products. Recent studies have shown that polysorbate 80 is readily degraded either through direct or indirect means. The degradation of polysorbate 80 causes a concern for the long-term stability of biopharmaceutical drug product, as the breakdown products of polysorbate 80 have been shown to cause adverse effects, such as formation of sub-visible and visible particles and mAb aggregation. Understanding the path and extent of degradation is of a paramount importance for the formulator during formulation development. A multi-detector HPLC system using charged aerosol and mass detection was developed and optimized for the characterization of polysorbate 80 standards. The system included a post-column make-up flow, i.e. an inverse gradient, that enabled constant eluent composition at the detectors. The inverse gradient eliminated the main source of variability for the charged aerosol detector response, thereby enabling the calculation of the mass balance between polysorbate components with different degrees of esterification. Extracted ion chromatograms of the mass detector combined with their respective retention times were used to qualitatively characterize the polysorbate samples down to the individual components. The system was applied to study the degradation of several polysorbate standards which occurred by enzymatic digestion or long-term storage. The system provided detailed information on the mechanism of degradation without the need for additional orthogonal analytical techniques., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

The present study discusses UHPLC method development allowing to establish ultra-high-resolution separations in gradient mode while operating at the kinetic performance limits, targeting the analysis of complex residual multi-class antibiotic samples in food products. The peak capacity and gradient occupation have been systematically assessed at different flow rates and gradient duration. The small particle size (1.5 µm core-shell particles) used in this study limits the mass-transfer contribution to band broadening when operating at high flow rate. As a result, for high-throughput analysis, high-pressure (1500 bar) operation leads to high resolving power where the gradient steepness dominates the peak capacity generation vs mass-transfer resistance. To reach the highest possible resolving power within a practically acceptable analysis time, one should use coupled-column systems at 1500 bar and adjust the gradient steepness correspondingly. Coupling four columns and applying a shallow gradient at 1500 bar led to a sample peak capacity of 379 in 140 min, allowing to resolve 71% of the analytes in a mixture composed of 61 milk antibiotics., Competing Interests: Declaration of Competing Interest Authors affiliated with VUB and Flanders Research Institute for Agriculture, Fisheries and Food declare no conflict of interest. Dr. De Pra and Dr. Steiner are employees of Thermo Fisher Scientific., (Copyright © 2022. Published by Elsevier B.V.)

This study involves the systematic assessment of the effects of system configuration on dispersion, pressure, and retention characteristics while operating a 1500 bar UHPLC system with 2.1 mm i.d. × 100 mm long columns packed with 1.5 µm core-shell particles in isocratic and gradient mode. Altering the system configuration by changing the i.d. of connection tubing and flow cells affects the elution time, dispersion characteristics, and the kinetic performance limits of the system. The gain in separation efficiency when decreasing tubing i.d. from 100 to 75 µm was found to contribute more to the decrease in separation impedance and the position of the kinetic performance curve than the loss in available column pressure induced by the narrower tubing. When applying steep gradients, characterized by gradient-to-column dead-time ratio < 7, optimizing instrument configuration leads to either a significant time gain factor of 3.9 without compromising peak capacity, or a gain in peak capacity with a gain factor of 1.3 while maintaining the analysis time constant. Due to the reduced fluidic volume of connection tubing of smaller i.d., a decrease in residence time is obtained. At the same time, an increase in k was observed due to a pressure-induced retention effect, and this effect is significant for late-eluting analytes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

Charge variant analysis is a widely used analytical tool in characterization of monoclonal antibodies (mAbs). It depicts the heterogeneity of charge variant forms, some of which may differ by only minor modifications of a single amino acid. The analysis ensures product consistency with no unwanted changes to the protein. With increasing numbers of new mAb drug products emerging in the market, the need for a robust charge variant analysis has intensified. The charge variant profiles often display partially resolved peaks on shoulders of larger peaks. This puts considerably more pressure on the robustness of the method to maintain the suboptimum selectivity. New products and techniques have emerged to address these requirements, in addition to the pre-existing older methods that may not have been optimized correctly in the past. This has led to some confusion as to the best approach and strategies in optimization of charge variant analysis. We show studies from several different approaches using on-line pH monitoring to check the performance characteristics of the methods. This has led to new insights on the interactions between the protein, column, and buffer constituents. We dispel some inaccurate assumptions about the different ion-exchange elution mechanisms and suggest ways to develop high-throughput methods that remain robust and of high resolution. Streamlined automatable method development tools are presented that will result in more efficient method optimization. The mechanisms behind poor chromatography design have provided an alternative explanation behind some methods failing when in the QC laboratories.

Method qualification is a key step in the development of routine analytical monitoring of pharmaceutical products. However, when relying on published monographs that describe longer method times based on older high-performance liquid chromatography column and instrument technology, this can delay the overall analysis process for generated drug products. In this study, high-throughput ultrahigh pressure liquid chromatography techniques were implemented to decrease the amount of time needed to complete a 24-run sequence to identify linearity, recovery, and repeatability for both drug assay and impurity analysis in 16 min. Multiple experimental parameters were tested to identify a range of experimental settings that could be used for the sequence while still maintaining this fast analysis time. The full sequence was replicated on a different system and with different columns, further demonstrating its robustness., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Iron-free HPLC systems, better known as biocompatible systems, are generally regarded to be chemically more inert compared to conventional HPLC systems. In this work, we studied the chromatographic behavior of some classes of compounds of pharmaceutical interest, analyzed with iron-free systems. Issues typically associated with metal contamination, i.e. strong peak tailing, were observed when using an amide polar-embedded column. Effects of the contamination were visible when anhydrous methanol-acetonitrile was used, indicating that this solvent, albeit generally considered safe for conventional HPLC systems, induce corrosion of iron-free systems. The confirmation of titanium as main acting contaminant came from systematically studying the contribution of each wetted component of the HPLC system on peak shape of affected molecules. Quantification of titanium by ICP-MS analysis of effluents provided further evidence on the source of contamination. A mechanistic description of the complex interaction between titanium ions, organic molecules, and column stationary phase is proposed. In the perspective of developing methods that are fully portable between stainless steel and titanium systems, recommendations are given in terms of potentially sensitive molecules, suitable mobile phase conditions, and type of column to be used., (Copyright © 2019. Published by Elsevier B.V.)

Quantitative structure-retention relationships (QSRR) predicting the values of solute "hydrophobicity" coefficient η' in the approximate hydrophobic subtraction model (HSM) can be used to predict retention times of compounds on numerous reversed-phase (RP) columns, provided that column parameters on the corresponding stationary phases are available. In the present study, we propose a new dual clustering-based localised QSRR approach, combining P-ratio clustering (where P is the octanol-water partition coefficient) with second dominant interaction (SDI)-based clustering, to produce predictive models with an acceptable level of prediction accuracy for in silico column scoping in RP method development. QSRR models for η' values were derived for 49 compounds out of 63 in a dataset extracted from the literature, where retention data were measured under one isocratic mobile phase condition (i.e., acetonitrile-water, 50:50 [v/v]). These models gave a predictive squared correlation coefficient Q ext(F2) 2 of 0.83 and a root mean square error of prediction (RMSEP) of 0.14. For the modelling, a genetic algorithm-partial least square regression (GA-PLS) approach was performed using the η' values and their relevant molecular descriptors. The corresponding retention times were predicted by applying the predicted η' values of the models and the stationary phase "hydrophobicity" parameter H values for the corresponding columns to the approximate HSM, resulting in excellent accuracy and predictability (Q ext(F2) 2 of 0.90 and RMSEP of 0.72 min). The established QSRR approach was experimentally verified for six Thermo Scientific columns (Acclaim™ 120 C18, Acclaim Polar Advantage, Acclaim Polar Advantage II, Accucore™ aQ, Accucore Phenyl-X, and Hypersil Gold C18 columns) using two types of datasets. The first dataset consisted of eight model compounds extracted from the original dataset and retention time predictions for those compounds were then evaluated on the above columns. The result showed good agreement between predicted and observed retention times with an acceptable error in retention time predictions (slope of 0.97, Q ext(F2) 2 of 0.95, a mean absolute error (MAE) of 0.43 min and RMSEP of 0.61 min). The second dataset included eight test compounds not included in the original dataset, which were all classified into the η' cluster by applying a Tanimoto similarity (TS) threshold of 0.7. Similarly, predicted retention times of the test compounds were compared with their corresponding observed retention times, resulting in acceptable retention time predictions with the slope of 0.99, Q ext(F2) 2 of 0.93 and RMSEP of 0.52 min. Comparisons of resolution values between columns were utilised to select the most suitable columns for separations of the compounds in the respective test sets. Actual chromatograms obtained on the chosen columns showed the feasibility for effective column scoping without experimentation on numerous RP stationary phases available in the USP website, based on the predicted resolution values., (Copyright © 2019. Published by Elsevier B.V.)

Nanotechnology is an exciting emerging field with multiple applications in skin regeneration. Nanofibers have gained special attention in skin regeneration based on their structural similarity to the extracellular matrix. A wide variety of polymeric nanofibers with distinct properties have been developed and tested as scaffolds for skin regeneration. Besides providing support for tissue repair, nanofibrous materials can act as delivery systems for drugs, proteins, growth factors, and other molecules. Moreover, the morphology, biodegradability, and other functionalities of nanofibrous materials can be controlled towards specific conditions of wound healing. Other nanostructured drug delivery systems, such as nanoparticles, micelles, nanoemulsions, and liposomes, have been used to improve wound healing at different stages. These nanoscale delivery systems have demonstrated several benefits for the wound healing process, including reduced cytotoxicity of drugs, administration of poorly water-soluble drugs, improved skin penetration, controlled release properties, antimicrobial activity, and protection of drugs against light, temperature, enzymes or pH degradation, as well as stimulation of fibroblast proliferation and reduced inflammation., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

The need to improve either sample throughput on separation efficiency has spurred the development of ultra-high-pressure LC instrumentation, allowing to operate up to column pressures of 1500bar. In the present study, the isocratic and gradient performance limits were assessed at UHPLC conditions applying columns packed with core-shell particles. First, the extra-column band broadening contributions were assessed and minimized. Using an optimized system configuration minimum reduced plate heights of 1.8 were recorded on 2.1×100 columns packed with 1.5μm core-shell particles. Increasing the pressure limit from 500 to 1500bar and at the same time reducing the particle size from 2.6 to 1.5μm has allowed the analysis time to be decreased by a factor of 1.5 in isocratic mode, while maintaining separation efficiency (N=54,000). The kinetic time-gain factor in isocratic mode was proportional to the ratio of the separation impedance of both columns multiplied with the pressure ratio applied. In addition, the effect of operating pressure on the time gain factor was assessed in gradient mode. Using optimized gradient steepness (tG/t0=12) and increasing the operating pressure from 500 to 1500bar a time gain factor of almost 13 was achieved for the separation of a mixture of waste-water pollutants without compromising peak capacity., (Copyright © 2015 Elsevier B.V. All rights reserved.)

LC-MS/MS is the most commonly used technique for the identification and characterization of proteins. The efficiency of the electrospray process is a critical factor in LC-MS/MS. Despite the benefits associated with very low flow rates for the ionization efficiency, most LC-MS/MS platforms are operated at relatively high flow rates. The purpose of this work was to develop a nano LC system operable at a flow rate of 20 nL/min, applicable for routine analysis in proteomics laboratories. Peptide separation was performed with an analytical column packed with 2 μm porous chromatographic beads, a length of 25 cm and an inner diameter (i.d.) of 25 μm. Practical usability, reproducibility, and overall performance of the system were evaluated with a tryptic peptide mixture generated from HeLa cells. Using 100 ng of sample, we identified on average 3721 protein groups based on 25,699 peptides. We demonstrate that the number of peptides identified with this system increases with decreasing flow rates. Probing the sensitivity of the set-up we analyzed only 10 ng of the sample, identifying an average number of 2042 protein groups based on 11 424 peptides. All MS data have been deposited in the ProteomeXchange with identifier PXD000396 (http://proteomecentral.proteomexchange.org/dataset/PXD000396)., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report on the optimization of nano-LC gradient separations of proteomic samples that vary in complexity. The gradient performance limits were visualized by kinetic plots depicting the gradient time needed to achieve a certain peak capacity, while using the maximum system pressure of 80 MPa. The selection of the optimal particle size/column length combination and corresponding gradient steepness was based on scouting the performance of 75 μm id capillary columns packed with 2, 3, and 5 μm fully porous silica C18 particles. At optimal gradient conditions, peak capacities up to 500 can be obtained within a 120 min gradient using 2 μm particle-packed capillary columns. Separations of proteomic samples including a cytochrome c tryptic digest, a bovine serum albumin tryptic digest, a six protein mix digest, and an Escherichia coli digest are demonstrated while operating at the kinetic-performance limit, i.e. using 2-μm packed columns, adjusting the column length and scaling the gradient steepness according to sample complexity. Finally, good run-to-run retention time stability (RSD values below 0.18%) was demonstrated applying ultra-high pressure conditions., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A review is given of the literature on the design, development and use of micromachined devices for separations in the liquid phase. The emphasis is on those devices that offer more than just an empty channel for, e.g., electrophoretic separation. Topographic structures have been incorporated in the channels during their microfabrication, offering a variety of possibilities for the separation of (mainly) DNA molecules based on different principles. Supports for a stationary phase for chromatographic separations have been introduced in the channels in different ways: by packing of the channels with stationary phase particles, by polymerization of monolithic structures, or by lithographic machining of pillars in the channels. It is shown that the latter strategy gives the highest potential for increasing the separation power of the devices. Still, more conventional approaches are closer to a routine application.

We report on the experimental investigation of the effect of the top and bottom wall plates in micromachined nonporous pillar array columns. It has been found that their presence yields an additional c-term type of band broadening that can make up a significant fraction of the total band broadening (at least if considering nonporous pillars and a nonretained tracer). Their presence also induces a clear (downward) shift of the optimal velocity. These observations are, however in excellent quantitative agreement with the theoretical expectations obtained from a computational fluid dynamics study. The presently obtained experimental results, hence, demonstrate that the employed high aspect ratio Bosch etching process can be used to fabricate micromachined pillar arrays that are sufficiently refined to achieve the theoretical performance limit.

The chromatographic characteristics were determined for a set of microfabricated separation channels structured with cylindrical and diamond-shaped pillars with a characteristic size of 5 microm. Channels with different structures and porosities were etched in a silicon wafer using lithographic techniques. The permeability for flow of the channels was shown to increase strongly with the overall porosity. Diamond-shaped pillars appeared to yield a slightly higher permeability than cylindrical pillars at the same channel porosity. Compared to packed columns, permeabilities were higher by a factor of up to 5. Band dispersion in the channels was measured with an unretained fluorescent probe compound using a fluorescence microscope. A relatively large variation in the observed plate heights between channels was found, which was mainly attributed to the inaccurate geometry of the structure close to the side walls. Reduced plate heights between 0.2 and 1.0 were obtained. The lowest plate heights were found for channels with low porosity. The chromatographic impedances were calculated and compared to the values for the traditional chromatographic systems. For one of the structured microchannels the impedance was found to be more than ten times lower than for a column packed with nonporous spherical particles. With the data collected, predictions are given on the possibilities in terms of efficiency and speed offered by structured microchannels for pressure-driven separations, taking practical constraints into account.

Two Wall Coated Open Tubular capillary columns, coated with poly(cyanopropylphenyl-dimethyl)siloxane and poly(diphenyl-dimethyl)siloxane stationary phases, have been selected for use in the COmetary SAmpling and Composition space experiment for the separation and identification of the wide range of volatile organic compounds which could be present in cometary nuclei. This article presents the main characteristics of the tandem column system for the analysis of solutes of cometary interest within the constraints of space instrumental operating conditions. The high efficiency of the columns is demonstrated and the influence of the operating conditions on their separation properties are investigated. The studied columns exhibit complementary retention pattern: their use in a dual column system makes it possible to achieve the separation and the identification of the compounds of interest. Finally, the good analytical behavior of the columns when analyzing samples which include large amounts of water, the main presumed volatile in comets, is demonstrated. The presented results thus show the suitability of the selected tandem columns system for the desired analyses, and their performance on adaptation to in-situ cometary chemical investigation.