Search

Based on an elaboration of the resource potential and annual production of tight sandstone gas and shale gas in the United States and China, this paper reviews the researches on the distribution of tight sandstone gas and shale gas reservoirs, and analyzes the distribution characteristics and genetic types of tight sandstone gas reservoirs. In the United States, the proportion of tight sandstone gas in the total gas production declined from 20%–35% in 2008 to about 8% in 2023, and the shale gas production was 8 310×108 m3 in 2023, about 80% of the total gas production, in contrast to the range of 5%–17% during 2000–2008. In China, the proportion of tight sandstone gas in the total gas production increased from 16% in 2010 to 28% or higher in 2023. China began to produce shale gas in 2012, with the production reaching 250×108 m3 in 2023, about 11% of the total gas production of the country. The distribution of shale gas reservoirs is continuous. According to the fault presence, fault displacement and gas layer thickness, the continuous shale gas reservoirs can be divided into two types: continuity and intermittency. Most previous studies believed that both tight sandstone gas reservoirs and shale gas reservoirs are continuous, but this paper holds that the distribution of tight sandstone gas reservoirs is not continuous. According to the trap types, tight sandstone gas reservoirs can be divided into lithologic, anticlinal, and synclinal reservoirs. The tight sandstone gas is coal-derived in typical basins in China and Egypt, but oil-type gas in typical basins in the United States and Oman.

In the deep Longmaxi Formation shale gas reservoirs of the southern Sichuan Basin, strong overpressure is universally developed to varying degrees. However, there is currently a lack of in-depth research on the formation mechanisms, evolutionary patterns, and the controlling effects on reservoir pore characteristics of strong overpressure. This limitation significantly restricts the evaluation of deep shale gas reservoirs. This study selected typical overpressured shale gas wells in Yongchuan, Luzhou, and Dazu areas as research subjects. Through comprehensive methods such as log analysis, fluid inclusion analysis, and numerical simulation, the dominant mechanisms of strong overpressure formation were determined, and the pressure evolution from early burial to late strong uplift was characterized. Additionally, the impact of varying degrees of overpressure on reservoir pore characteristics was studied using techniques such as scanning electron microscopy, gas adsorption-mercury intrusion, and helium porosity testing. The research findings indicate that hydrocarbon generation expansion is the primary mechanism for strong overpressure formation. The pressure evolution in the early burial phase is controlled by the processes of kerogen oil generation and residual oil cracking into gas. The reservoir experienced three stages: normal pressure (Ordovician to Early Triassic), overpressure (Early Triassic to Early Jurassic), and strong overpressure (Early Jurassic to Late Cretaceous), with pressure coefficients of approximately 1.08, 1.56, and 2.09, respectively. During the late strong uplift phase, the adjustment of early overpressure occurred due to temperature decrease and gas escape, leading to a decrease in formation pressure from 140.55 MPa to 81.63 MPa, while still maintaining a state of strong overpressure. Different degrees of strong overpressure exert a significant control on the physical properties of shale reservoirs and the composition of organic matter pores. Variations exist in the organic matter pore morphology, structure, and connectivity within the deep Wufeng-Longmaxi shale. Higher overpressure favors the preservation of organic large pores and reservoir porosity. Under conditions of strong overpressure development, deep siliceous shales and organically rich clay shales exhibit favorable reservoir properties. By determining the dominant mechanisms of strong overpressure in the Wufeng-Longmaxi Formation and studying pore characteristics, this research not only deepens the understanding of the geological features of deep shale gas reservoirs but also provides a new perspective for understanding the overpressure mechanisms and reservoir properties of deep shale gas reservoirs. Moreover, it is of significant importance for guiding the exploration and development of deep Longmaxi shale and provides valuable references for further research in related fields.

In 2012, China's first national shale gas demonstrations areas were set up in the Sichuan Basin. After 10 years' construction and practice, the giant marine shale gas area of 10 × 1012 m3 level is built up in the Sichuan Basin, and shale gas steps into a new stage of large-scale benefit exploration and development. In order to systematically summarize the achievements in shale gas exploration and development and provide guidance and reference for the exploration and development of deep shale gas and shale oil & gas in other areas, this paper systematically summarizes the main characteristics, development models and key identification and evaluation technologies for quality reservoirs of Wufeng Formation–Longmaxi Formation shale gas by analyzing the electric property, lithofacies, reservoir parameters and microscopic porosity of key wells in the basin. And the following research results are obtained. First, biogenetic siliceous shale, calcareous shale and mixed shale are main lithofacies types in quality shale gas reservoirs, and they are formed in the environment of semi-deep and deep water continental shelf. Their lateral distribution is controlled by the paleogeomorphology and their vertical development is influenced by provenance, redox condition and paleo productivity. They are 25–90 m thick. Second, in the quality shale gas reservoirs develop organic pores, inorganic pore and microfractures (including lamina/bedding fractures), among which, organic pore is one of the main reservoir spaces and microfracture is not only indispensable reservoir space, but also production pathway. The reservoir space of shale gas is overall micro-nano pore, and macropores play an important role in shale gas enrichment. Third, three development models of quality reservoir are established, including sedimentary type, diagenesis type and reworking type. The sedimentary type is the foundation. Multiple quality reservoirs are developed in the high U/Th interval of graptolite belt at the bottom of Longmaxi Formation, and their thickness is mainly controlled by paleogeomorphology and especially greater in the depression area. The diagenesis type is divided into three forms, i.e., syngenetic-early diagenetic rigid support, middle-late diagenetic mineral-organic matter transformation, and overpressure relief compaction. The reworking type is dominated by quality reservoirs with microfractures. Fourth, the core technologies for identifying and evaluating quality shale gas reservoir include large-size core and rock slice observation, high-accuracy rock mineral identification, experimental gas content test and simulation, SEM microscopic characterization, 3D microscopic pore reconstruction, comprehensive geophysical interpretation and prediction and big data analysis. In conclusion, nearly 10 years' research and practice achievements in demonstration area construction can deepen the understanding on domestic quality shale gas reservoirs, promote the effective development of the theories and technologies related to shale gas reservoirs, improve the prediction accuracy of shale gas sweet spot zones/intervals, and expand the shale gas exploration and development achievements of demonstration areas.

The exploration and development theory and technology of marine shale gas with shallow burial depth of 3500 m in South China has become mature after more than 10 years of practice. In order to continuously promote the exploration and development of shale gas in China, based on the research results of many scholars, combined with production practice, the main characteristics of marine shale gas in China and the main theory and technology of exploration and development are further summarized. The results show that: (1) The basic characteristics of marine shale gas in southern China are marine deep-water shelf deposition, and organic-rich shale is distributed continuously in a large area; The organic matter is stored in situ after high thermal maturity gas generation, and the gas content of shale is affected by late tectonic activity; The reservoir space is dominated by nano-scale pores, and the reservoir is super-tight and ultra-low permeability, which has no natural productivity without well stimulation; Bedding and natural fracture affect the productivity of shale gas wells; The mechanical properties of shale rock determine the effect of horizontal wells. In the early stage of well production, the production rate is high and the decline is fast, while in the middle and late stage, the rate is low but the production cycle is long. (2) Based on the above characteristics, the theory of “sweet spot” and “sweet interval” of shale gas and the theory of effective development of artificial gas reservoir are established, that is, the sedimentary and tectonic interaction forms the “sweet area” or “sweet spot” of marine shale gas. Gas productivity is determined by geological and engineering factors, so the “sweet spot” must be found to develop. By constructing artificial gas reservoir through “making an artificial high permeability area, and reconstructing a seepage field”, the effective development of ultra-tight and low permeability shale gas reservoirs can be realized. It is the most effective technique for shale gas development to accurately create “transparent geological body” of reservoirs based on geology-engineering integrated evaluation technology and establish artificial gas reservoir through multi-stage fracturing technology. (3) The overpressure area in the southern Sichuan Basin is the “sweet area” for shale gas development. The “sweet interval” of the lower Silurian Longmaxi Formation with a thickness of 3–5 m and high brittle-rich organic matter is the optimal “golden target” for horizontal wells. (4) The development leapfrog from the first generation to the second generation has been realized by the key technology of multi-stage fracturing of horizontal wells. The EUR per well of Upper Ordovician Wufeng Formation and Longmaxi Formation in southern Sichuan has increased from 0.5 × 108 m3 in the initial stage to 1.0 × 108–1.2 × 108 m3 at present with a buried depth of shallower than 3500 m. (5) The effective area favorable for shale gas development in southern Sichuan is 2.0 × 104 km2, and it is estimated that the proven geological reserves of shale gas can reach 10 × 1012 m3. It is preliminarily predicted that the shale gas production in China will exceed 300 × 108 m3 in 2025 and reach 400 × 108 m3 in 2035.

The lacustrine shale, represented by the Lianggaoshan Formation, is widely distributed in oil and gas basins of China and will be a key target for unconventional hydrocarbon exploration in the future. Due to the complexity of geological conditions, the distribution of lacustrine shale and the mechanism of organic matter (OM) enrichment show significant differences between different basins. In this study, seismic interpretation, core observation, high-frequency geochemical analysis and other methods are integrated to reveal factors controlling lacustrine shale distribution and OM accumulation in lacustrine shale. The results suggest that six bottom-to-top organic-rich shale intervals are identified within the Lianggaoshan Formation due to lake-basin migration. The migration process of depocenters controls the planar distribution of lacustrine organic-rich shale. The organic-rich lacustrine shale within 1st Member and 2nd Member is characterized by relatively high paleoproductivity and dysoxic condition. The lacustrine organic-rich shale of the upper to the top of 3rd Member is characterized by relatively low paleoproductivity, relatively high terrestrial input, and dysoxic condition. Paleoproductivity and preservation condition caused by lake-level rise are generally the major influencing factor of organic matter accumulation in 1st Member and 2nd Member organic-rich shale. The input of terrestrial OM, and the condition of preservation caused by rapid deposition are the major factors controlling OM accumulation in 3rd Member of Lianggaoshan Formation.

Based on core description, thin section identification, X-ray diffraction analysis, scanning electron microscopy, low-temperature gas adsorption and high-pressure mercury intrusion porosimetry, the shale lithofacies of Shan23 sub-member of Permian Shanxi Formation in the east margin of Ordos Basin was systematically analyzed in this study. The Shan23 sub-member has six lithofacies, namely, low TOC clay shale (C-L), low TOC siliceous shale (S-L), medium TOC siliceous shale (S-M), medium TOC hybrid shale (M-M), high TOC siliceous shale (S-H), and high TOC clay shale (C-H). Among them, S-H is the best lithofacies, S-M and M-M are the second best. The C-L and C-H lithofacies, mainly found in the upper part of Shan23 sub-member, generally developed in tide-dominated delta facies; the S-L, S-M, S-H and M-M shales occurring in the lower part of Shan23 sub-member developed in tide-dominated estuarine bay facies. The S-H, S-M and M-M shales have good pore structure and largely organic matter pores and mineral interparticle pores, including interlayer pore in clay minerals, pyrite intercrystalline pore, and mineral dissolution pore. C-L and S-L shales have mainly mineral interparticle pores and clay mineral interlayer pores, and a small amount of organic matter pores, showing poorer pore structure. The C-H shale has organic micro-pores and a small number of interlayer fissures of clay minerals, showing good micro-pore structure, and poor meso-pore and macro-pore structure. The formation of favorable lithofacies is jointly controlled by depositional environment and diagenesis. Shallow bay-lagoon depositional environment is conducive to the formation of type II2 kerogen which can produce a large number of organic cellular pores. Besides, the rich biogenic silica is conducive to the preservation of primary pores and enhances the fracability of the shale reservoir.

Porosity is a key parameter in shale gas reservoir evaluation and reserve calculation and its accurate test is the basis for calculating geological reserves of shale gas and determining development plans. In order to clarify the differences between different porosity test methods and their influences on the calculation results of shale gas reserves, we collected 65 shale samples of Lower Silurian Longmaxi Formation from six shale gas wells in the Zhaotong National Shale Gas Demonstration Area of the southern Sichuan Basin for comparative experiments using three porosity test method, including gas injection porosimetry (GIP) method, water immersion porosimetry (WIP) method and nuclear magnetic resonance (NMR) method. Then, these three methods were comparatively analyzed based on the test results. Finally, it was proposed to optimize the key parameters of these three shale porosity test methods. And the following research results were obtained. First, in terms of the GIP method, the particle size of shale sample shall be in the range of 20–60 mesh and the helium saturation equilibrium time shall be over 1800 s. Second, in terms of the WIP method, the sample shall be dried for at least 48 h under 110 °C and saturated for 24 h under the confining pressure of 15 MPa. Third, in terms of the NMR method, NMR porosity calculation shall not be conducted until the NMR signal of the dried sample is deducted, on the basis of echo time and waiting time optimization. Fourth, porosity average and median value obtained by these three shale porosity test methods follow the relationship of WIP porosity > NMR porosity > particle GIP porosity > plunger GIP porosity. Fifth, different shale porosity test methods have greater influences on the calculation results of shale gas geological reserves, whose difference can reach 20%. In conclusion, during the application of NMR method and WIP method, fluid is introduced for saturation, which may damage the shale pores. However, the particle GIP porosity can reflect the entire space of shale more comprehensively and is not influenced by the properties of the applied fluid. Therefore, it is suggested to adopt the particle GIP method to calculate shale gas geological reserves.

Taking the Upper Ordovician Wufeng Formation to Lower Silurian Longmaxi Formation shale reservoirs in western Chongqing area as the study target, the argon ion polishing scanning electron microscope and nuclear magnetic resonance (NMR) experiments of different saturated wetting media were carried out. Based on the image processing technology and the results of gas desorption, the pore-fracture configuration of the shale reservoirs and its influence on gas-filled mechanism were analyzed. (1) The reservoir space includes organic pores, inorganic pores and micro-fractures and there are obvious differences between wells in the development characteristics of micro-fractures; the organic pores adjacent to the micro-fractures are poorly developed, while the inorganic pores are well preserved. (2) According to the type, development degree and contact relationship of organic pore and micro-fracture, the pore-fracture configuration of the shale reservoir is divided into four types. (3) Based on the differences in NMR T2 spectra of shale samples saturated with oil and water, an evaluation parameter of pore-fracture configuration was constructed and calculated. The smaller the parameter, the better the pore-fracture configuration is. (4) The shale reservoir with good pore-fracture configuration has well-developed organic pores, high porosity, high permeability and high gas content, while the shale reservoir with poor pore-fracture configuration has micro-fractures developed, which improves the natural gas conductivity and leads to low porosity and gas content of the reservoir. (5) Based on pore-fracture configuration, from the perspective of organic matter generating hydrocarbon, micro-fracture providing migration channel, three types of micro gas-filled models of shale gas were established.

Biogenic quartz in the Upper Ordovician Wufeng Formation to Lower Silurian Longmaxi Formation (Wufeng– Longmaxi) shale layers in the Sichuan Basin and its periphery is qualitatively analyzed and quantitatively characterized by organic petrologic, mineralogic, and geochemical methods to find out the coupling effect between organic matter and quartz. (1) There are two types of biogenic quartz in the shale layers: Type I quartz is submicron quartz appearing in clusters around the organic matter. Type II quartz is in nano-scale grain size and floats in spherical shape on organic matter, with grains in point-to-point or surface-to-surface contact; this type of quartz is mainly biologic origin and slightly affected by hydrothermal activity in local parts. (2) The reservoirs in the Wufeng–Longmaxi formations is consistent in distribution with biogenic silica content in them, and mainly concentrated at the bottom of the Wufeng–Longmaxi formations, and is thinner in the Changning and Weiyuan regions, while thicker in the Fuling region. (3) The biogenic quartz in the Wufeng–Longmaxi shale worked through the entire evolution process of hydrocarbon generation. The presence of biogenic quartz can enhance the development of organic matter pores and microcracks, and can effectively preserve the organic matter pores and residual intergranular pores, forming “biological silicon intergranular pores, organic pores and micro-fractures”. This would benefit later hydraulic fracturing and result in high production/stable production of well. The coupling effect between biogenic quartz development and organic matter evolution and hydrocarbon generation is a critical factor for high-quality shale reservoir development.

In order to provide technical support for the shale gas exploration and development in the Lower Silurian Longmaxi Formation of the Sichuan Basin, this paper takes the Longmaxi Formation in the Changning and Fuling Shale Gas Fields as the research object to quantitatively characterize the development characteristics of natural fractures in the Longmaxi Formation shale by means of helium pycnometry, X-ray diffraction (XRD), true density testing and other methods, with the aid of the modified petrophysical model. Then, the development types and genetic mechanisms of natural fractures and their influences on shale gas development are discussed. The following research results are obtained. First, the modified petrophysical model can accurately describe the pore system in the Changning shale with a fitting rate of 0.74. Second, the development of natural fractures in shale is different in various regions. The natural fractures in the Changning Shale Gas Field, controlled by basement thrust faults, decollement layers and internal folds, are locally developed and filled with calcareous, and the average fracture porosity is 0.15%. In the Fuling Shale Gas Field, however, natural fractures, mainly controlled by reverse faults and slippage effect, are commonly more developed and unfilled or semi-filled with siliceous, and the average fracture porosity is 1.30%. Third, under the formation conditions, the opening of natural fractures is different. The natural fractures in the Changning Shale Gas Field are basically closed with weaker flowing ability, while those in the Fuling Shale Gas Field are relatively open with stronger flowing ability. Fourth, the occurrence mode of shale gas is influenced by natural fractures, and it is internally dominated by free gas. The initial gas production of shale gas wells is higher. In conclusion, (1) the regression coefficient is introduced to calculate the actual total organic matter content, which promotes the modified petrophysical model to describe matrix pores and fracture pores more accurately; (2) the development of natural fractures in the shale producing pay of the Sichuan Basin is relatively beneficial to shale gas enrichment and exploitation, but the flowing ability of the natural fractures will be weakened under the original formation conditions.

Among the world's 10 major gas producing countries, only the United States (USA), Russia and Iran have annual gas production of 250 × 109 m3 or more. China is expected to have gas output of 250 × 109 m3 in 2025. There are three advantages for the great development of natural gas industry in China. Firstly, the natural gas resources are rich and the proved rate is low and only 8.6%, so it has the resource advantage for faster development; Secondly, over the past 35 years, natural gas production continues to grow, with the growth advantage for faster development; Finally, since 2006, the remaining recoverable reserves of natural gas have been increasing year by year, showing the reserve advantage for faster development. In recent 10 years, China's annual natural gas production growth rate, remaining recoverable reserves and reserve-production ratio of natural gas support that China's annual gas production in 2025 will reach 250 × 109 m3. Suggestions for accelerating natural gas exploration and development during the 14th Five-Year Plan Period: (1) Opening new exploration and development fields of Carboniferous-Permian shale gas in the Ordos Basin; (2) Exploring three potential large gas districts with hidden coal measures in the northern Tianshan Piedown Depression, Qaidam Depression, and Xihu Sag; (3) Accelerating the development of seven large gas fields with proved reserves over 100 × 109 m3, such as Lingshui 17–2 Gas Field; (4) Increasing the drilling of gas wells and ultra-deep exploration wells.

Natural gases from the Taiyang (shallow), Jiaoshiba (middle), and Weirong (deep) shale gas fields in the southern Sichuan Basin were analyzed for molecular and stable carbon isotopic compositions to investigate the geochemical characteristics and gas origins. All the gases belong to shale gas from the Upper Ordovician–Lower Silurian shale and are dominated by methane with gas wetness generally less than 0.83%. The δ13C1 values are −28.5‰, −30.3‰, and −35.2‰ in Taiyang, Jiaoshiba, and Weirong shale gas fields, respectively. The extremely high thermal maturity is the controlling factor for the enrichment of 13C in methane, with a minor contribution from the heavy carbon isotope of the organic matter in the Ordovician Wufeng Formation. Fischer–Tropsch-type synthesis of hydrocarbon gas from CO2 and H2 contributes to the increase of wet gas, which results in the offset from the δ13C1∼wetness linear trend in the Taiyang and Jiaoshiba gas fields. Methane, ethane, and propane in the Taiyang shale gas field have increasing δ13C values with increasing burial depth, which is mainly caused by diffusive migration. All gases are characterized by a complete carbon isotopic reversal trend (δ13C1 > δ13C2 > δ13C3), and it is mainly caused by the reversible free-radical reactions with the conversion from alkane to alkyl groups, with some contribution from the Fischer–Tropsch-type synthesis. The results of this study will improve our understanding of the geochemical characteristics of shale gases from different burial depths and have important implications for future shale gas exploration in the deep and shallow layers.

Based on thin-section, argon-ion polished large-area imaging and nano-CT scanning data, the reservoir characteristics and genetic mechanisms of the Lower Silurian Longmaxi shale layers with different laminae and laminae combinations in the Sichuan Basin were examined. It is found that the shale has two kinds of laminae, clayey lamina and silty lamina, which are different in single lamina thickness, composition, pore type and structure, plane porosity and pore size distribution. The clayey laminae are about 100 μm thick each, over 15% in organic matter content, over 70% in quartz content, and higher in organic pore ratio and plane porosity. They have abundant bedding fractures and organic matter and organic pores connecting with each other to form a network. In contrast, the silty laminae are about 50 μm thick each, 5% to 15% in organic matter content, over 50% in carbonate content, higher in inorganic pore ratio, undeveloped in bedding fracture, and have organic matter and organic pores disconnected from each other. The formation of mud lamina and silt lamina may be related to the flourish of silicon-rich organisms. The mud lamina is formed during the intermittent period, and silt lamina is formed during the bloom period of silicon-rich organisms. The mud laminae and silt laminae can combine into three types of assemblages: strip-shaped silt, gradating sand-mud and sand-mud thin interlayers. The strip-shaped silt assemblage has the highest porosity and horizontal/vertical permeability ratio, followed by the gradating sand-mud assemblage and sand-mud thin interlayer assemblage. The difference in the content ratio of the mud laminae to silt laminae results in the difference in the horizontal/vertical permeability ratio.

Recently, shale gas research and industrial production in China have been significantly developed, which has enriched the theory of natural gas geology in China and increased the supply of domestic natural gas production. In the future, shale gas will obtain great achievements among the developments of the natural gas industry in China. The following four geological and geochemical issues about the exploration and research of shale gas have great significance: (1) China has to break through the single economic shale gas formation. The United States found at least thirty sets of economic shale gas formations in 29 basins. To date, only one basin in China (Sichuan Basin) has found one set of economic shale gas formation (Wufeng-Longmaxi formations). (2) In regards to the interval RO value of the economic shale gas formations and segment RO value of the gas fields, the interval RO values are 3.31% for the economic shale gas formation in China. However, it is 4.1% for that in the USA. The segment RO values are 2.34% for the gas fields in China and 3.5% for that in the USA. So the values are small in China, but big in the USA. Several shale gas fields derived from sapropelic sources in the United States were found in the oil generation window with RO = 1.0%–1.3%. Therefore, shale gas exploration in China also needs to pay attention to this stage. At the same time, attention should be paid to the exploration of shale gas derived from humic sources. (3) When it comes to the continuous high-yield period of the gas field, the world's first commercially developed shale gas field (Barnett) shows a high-yield forecast of 10 × 109 m3 per year for about twenty years. The development of the shale gas field in China is still in the construction stage. (4) In terms of the role of fracture in shale gas preservation and development, the fault has a dual effect on the enrichment of shale gas. In the United States, tectonic in the shale gas basin is stable, and faults are few, while structures in China in the shale gas basin are active, and faults are developed. Therefore, faults have more harm than good to the shale gas in China, which caused the fragmentation of the continuously distributed Wufeng-Longmaxi formations, limiting the area of the gas field.

At present, shale gas exploration and development in China is faced with some problems, such as the imperfect evaluation system of reservoir effectiveness and the limitations of reservoir evaluation system on efficient development of shale gas. In order to improve the content and the standard of reservoir evaluation, this paper analyzed the shortcomings and challenges in the static evaluation of shale gas reservoirs on the basis of existing reservoir evaluation, and established a method for evaluating shale gas reservoir effectiveness and a scheme for classifying pore systems. Then, the dynamic evaluation parameters after shale fracturing and their effects on drainage and production measures were discussed. In addition, the potential evaluation parameters of “automatic mitigating water blocking” were studied, and a comprehensive reservoir evaluation system of “static–dynamic” combination was established. And the following research results were obtained. First, new challenges to the shale gas reservoir evaluation are emerged as the lack of in-depth study on “reservoir effectiveness, dynamic evaluation parameter system after fracturing and drainage and production measures after fracturing”, which leads to the serious lag of existing shale gas reservoir evaluation system behind production. Second, the evaluation of reservoir effectiveness is mainly presented as the evaluation on the lower limit of effective porosity, and is embodied in the influence of clay bound water and unconnected pores on the development of shale gas. Third, the development of shale gas reservoir evaluation follows the trend of refining the static reservoir evaluation parameters, defining the potential evaluation indexes of “automatic mitigating water blocking” and establishing the reservoir comprehensive evaluation system of “static–dynamic” combination. Fourth, a post-frac dynamic evaluation system is determined for the potential evaluation indexes of “automatic mitigating water blocking” (e.g., wettability, water imbibition retention capacity, water imbibition expansion mode, expansion rate, and water imbibition cracking capacity). Fifth, a reservoir evaluation idea is put forward that “static evaluation of shale gas reservoir is the foundation and postfrac dynamic evaluation is the complement”, and a comprehensive reservoir evaluation system is established of “static–dynamic” combination suitable for the evaluation of marine shale gas reservoirs in China.

Abstract: The shales in the 2nd Member of Shanxi Formation in the east margin of the Ordos Basin were deposited in a marine-nonmarine transitional environment during the Permian. Based on the recent breakthroughs in the shale gas exploration and theoretical understandings on the shale gas of the study area, with a comparison to marine shale gas in the Sichuan Basin and marine-nonmarine transitional shale gas in the U.S., this study presents the geological characteristics and development potential of marine-nonmarine transitional gas in the study area. Four geological features are identified in the 2nd Member of the Shanxi Formation in the study area has: (1) stable sedimentary environment is conductive to deposition of widely distributed organic shale; (2) well-developed micro- and nano- scale pore and fracture systems, providing good storage capacity; (3) high content of brittle minerals such as quartz, leading to effectively reservoir fracturing; and (4) moderate reservoir pressure and relatively high gas content, allowing efficient development of shale gas. The 2nd Member of Shanxi Formation in the east margin of Ordos Basin is rich in shale gas resource. Three favorable zones, Yulin-Linxian, Shiloubei-Daning-Jixian, and Hancheng-Huangling are developed, with a total area of 1.28×104 km2 and resources between 1.8×1012 and 2.9×1012 m3, indicating a huge exploration potential. Tests of the 2nd Member of Shanxi Formation in vertical wells show that the favorable intervals have stable gas production and high reserves controlled by single well, good recoverability and fracability. This shale interval has sufficient energy, stable production capacity, and good development prospects, as evidenced by systematic well testing. The east margin of the Ordos Basin has several shale intervals in the Shanxi and Taiyuan formations, and several coal seams interbedded, so collaborative production of different types of natural gas in different intervals can be considered. The study results can provide reference for shale gas exploration and development and promote the rapid exploitation of shale gas in China.

Marine–continental transitional (hereinafter referred to as transitional) Permian shales are important targets for shale gas in China because of the considerable volumes of shale gas resources present in them. In this study, transitional shale samples from the Permian Shanxi Formation in the Daning–Jixian block along the eastern margin of the Ordos Basin were collected to investigate the effects of organic and inorganic compositions on the development of their pore structures through organic petrographic analysis, X–ray diffraction, scanning electron microscope (SEM) observation, gas (N2 and CO2) adsorption, high-pressure mercury injection (HPMI), and methane adsorption experiments. The organic petrographic analysis reveals that the Permian Shanxi shale comprises Type-II2-III kerogens, and the average vitrinite reflectance (Ro) is 2.3% at the overmature stage or in the dry gas window. The shale interval at the bottom of the lagoon facies is considered the most favorable interval throughout the entire section because of its high total organic carbon (TOC) content (4.19–43.9%; an average of 16.9%) and high brittle mineral content (38.3–73.2%; an average of 55.8%). N2 and CO2 gas adsorption and HPMI tests reveal the pore size distribution characteristics of the shale. The full pore size distribution by the gas adsorption and HPMI test reveals that micropores (

Strong overpressure conditions are widely distributed in the deep Longmaxi Formation (Fm) shale reservoirs in the Southern Sichuan Basin, with pressure coefficients ranging from 1.75 to 2.45. Overpressure plays a positive role in the high yield of shale gas, but a detailed study of its generation mechanism, evolution history, and potential impact on pore development is still lacking. This study’s evidence from theoretical analysis and the logging response method indicates that hydrocarbon generation expansion is the main generation mechanism for strong overpressure. Through the combined analysis of basin modeling, inclusions analysis, and numerical simulation, pressure evolution at different stages is quantitatively characterized. The results show that, during the shale’s long-term subsidence process, the shale reservoir’s pressure coefficient increased to 1.40 because of oil generated by kerogen pyrolysis. Then it increased to 1.92 due to gas generated by residual oil cracking. During the late strong uplift process of the shale, temperature decrease, gas escape, and stratum denudation caused the pressure coefficient to first decrease to 1.84 and then increased to 2.04. Comparing pore characteristics under different pressure coefficients indicates that higher pressure coefficients within shale reservoirs contribute to the maintenance of total porosity and the development of organic macropores, but the influence on the morphology of organic pores is negligible. These results will provide the scientific basis for optimizing sweet spots and guiding shale gas exploration in the study area.

The pore structure characterization and its controlling factors in overmature shales are keys to understand the shale gas accumulation mechanism. Organic matter in source rocks is a mixture of various macerals that have their own specific evolutionary pathways during thermal maturation. Pores within macerals also evolve following their own path. This study focused on petrographic characterization and maceral controls on porosity in overmature marine shales in China and the United States. Shale from Ordos Basin in China was also selected as an example of overmature transitional shale for maceral comparison. Organic petrology techniques were used to identify maceral types and describe morphological features in detail; scanning electron microscopy techniques were then used to document the abundance and development of pores within macerals. Helium measurement, mercury intrusion capillary pressure, and CO2 adsorption were especially applied to quantify the pore structure of Wufeng-Longmaxi shale from Sichuan Basin in China. The vitrinite reflectance equivalent of the studied overmature samples is ~2.4%. The macerals within the studied marine shales are composed mainly of pyrobitumen and zooclasts. At this maturity, pyrobitumen develops abundant gas-related pores, and their volume positively correlates to gas content. Three types of pyrobitumen and its related pore structure are characterized in Wufeng-Longmaxi shales. Zooclasts contribute to total organic carbon (TOC) content but little to porosity. When the TOC content is above 1.51% in Wufeng-Longmaxi samples, the TOC content positively correlates to quartz content. Organic matter strongly controls micropore development. Pores of diameter~0.5 nm provide a significant amount of micropore volume. Clay mineral and quartz contents control micro- and macropore increments in organic-lean shales. MICP results indicate that pores within 3-12 nm and 900-2500 nm account for a major contribution to pore volume obtained. Determining the proportions of pyrobitumen to zooclasts within the total organic matter in pre-Devonian organic-rich marine shales is important in predicting porosity and gas storage capacity in high-maturity shales.

The Sichuan Basin is a major target for shale gas exploration in present China because of its rich gas stored in abundant black shales with multiple bed series. For further guidance or reference, field exploration and development practices in the shale reservoirs Upper Ordovician Wufeng–Lower Silurian Longmaxi shale reservoirs were studied in terms of development stages and progress, favorable conditions for shale gas accumulation, bottlenecking issues on theories and technologies related to shale gas development, and so on. The following findings were obtained. (1) Shale with rich organic matters originated from the deep shelf has a good quality and great thickness in the continuous beds. The relatively stable wide buffer zones in synclines (anticlines) provides favorable conditions for shale gas accumulation and preservation with well-developed micro-fractures and overpressure as necessary factors for a great potential of high shale gas productivity. (2) The bottlenecking technical issues restricting the shale gas industrial development in this study area include the following aspects: understandings of rich-organic matter shale sedimentary facies and modes, shale reservoir diagenetic process and evaluation systems, shale gas generation and accumulation mechanism, geophysical logging identification and prediction of shale gas layers, low resource utilization rate, great uncertainty of shale gas development, no technological breakthrough in the exploration of shale gas reservoirs buried deeper than 3500 m. In conclusion, this study area will be the major target for the shale gas exploration and development in China in a rather long period in the future. Keywords: Sichuan Basin, Upper Ordovician Wufeng–Lower Silurian Longmaxi, Shale gas, Exploration and development, Progress, Challenge, Prospect

The dominant factors controlling development of microfractures in the black shale and the origin of microfractures in the sweet spot intervals were discussed of the Ordovician Wufeng Formation−Silurian Longmaxi Formation in Shuanghe outcrop profile, Changning, Sichuan Basin. For the target interval, holographic photograph statistics of microscopic composition of 203 big thin sections and 203 small thin sections, TOC content of 110 samples, 110 whole rock X-ray composition, and main trace elements of 103 samples were tested and analyzed. The results show that the microfractures include bedding microfractures and non-bedding microfractures. The bedding microfractures are mostly plane slip microfractures, lamellation microfractures and echelon microfractures. The non-bedding microfractures are largely shear microfractures and tension microfractures. Vertically, the density of microfractures is the highest in SLM1 Member of Longmaxi Formation, decreases from SLM2 Member to SLM5 Member gradually, and drops to the lowest in Wufeng Formation. The microfracture density is positively correlated with siliceous content and negatively correlated with the carbonate content. The finer the grain size of the black shale, the higher the density of the microfractures is. The microfracture density is controlled by biogenic silicon: the higher the content of biogenic silicon, the higher the microfracture density is. Under the effect of ground stress, microfractures appear first in the lamellar interfaces. Regional tectonic movements are the key factor causing the formation of microfractures in the sweet spot interval, diagenetic contraction is the main driving force for lamellation fractures, and the pressurization due to hydrocarbon generation is the major reason for the large-scale development of microcracks. Key words: microfracture, TOC content, lamina, lithology, black shale, Silurian Longmaxi Formation, Ordovician Wufeng Formation, Sichuan Basin

Abstract: Based on the drilling data of the Silurian Longmaxi Formation in the Sichuan Basin and periphery, SW China, the Ro lower limits and essential features of the carbonization of organic matter in over-high maturity marine shale were examined using laser Raman, electrical and physical property characterization techniques. Three preliminary conclusions are drawn: (1) The lower limit of Ro for the carbonization of Type I-II1 organic matter in marine shale is 3.5%; when the Ro is less than 3.4%, carbonization of organic matter won't happen in general; when the Ro ranges from 3.4% to 3.5%, non-carbonization and weak carbonization of organic matter may coexist; when the Ro is higher than 3.5%, the carbonization of organic matter is highly likely to take place. (2) Organic-rich shale entering carbonization phase have three basic characteristics: log resistivity curve showing a general “slender neck” with low-ultralow resistance response, Raman spectra showing a higher graphite peak, and poor physical property (with matrix porosity of only less than 1/2 of the normal level). (3) The quality damage of shale reservoir caused by the carbonization of organic matter is almost fatal, which primarily manifests in depletion of hydrocarbon generation capacity, reduction or disappearance of organic pores and intercrystalline pores of clay minerals, and drop of adsorption capacity to natural gas. Therefore, the lower limit of Ro for the carbonization of Type I-II1 organic matter should be regarded as the theoretically impassable red line of shale gas exploration in the ancient marine shale formations. The organic-rich shale with low-ultralow resistance should be evaluated effectively in area selection to exclude the high risk areas caused by the carbonization of organic matter. The target organic-rich shale layers with low-ultralow resistance drilled during exploration and development should be evaluated on carbonization level of organic matter, and the deployment plan should be adjusted according to the evaluation results in time. Key words: Lower Silurian, Longmaxi Formation, marine shale, thermal maturity, organic matter carbonization, resistivity logging, exploration risk

The graptolitic shale of the Wufeng–Longmaxi Formations is widely deposited across the Ordovician and Silurian transition in South China, which is the target of shale gas exploration and development within China. The contribution of graptolites to organic enrichment and reservoir of gas shale is discussed below based on the statistics of nearly 1000 shale samples from the Wufeng Formation and the bottom part of the Longmaxi Formation in the southern and northern margins of the Yangtze plate. The assessment involves graptolites abundance, the total organic carbon (TOC) content analyses, and the different scales of scanning electron microscopy analyses of related samples. The TOC content of the Wufeng–Longmaxi graptolitic shales (including graptolites and non-graptolites, i.e., the host shale) is mainly controlled by that of its host shale, while less affected by the graptolites abundance, indicating that the graptolites barely influence the organic enrichment. Graptolites consist of a large number of organic matter with reticular biological tissue structure; they account for 20%–50% of the graptolitic area. The aforementioned also developed honeycomb-shaped pores with pore sizes ranging 110 nm-1.7 μm (an average of about 500 nm), which are higher than those of the organic pores in the host shale (108–770 nm, average 330 nm), proving that graptolites have an important contribution to shale gas storage space. Since there are a large number of graptolites within the shales from the Wufeng Formation and the bottom part of the Longmaxi Formation, the laminated and stacked local pattern of their distribution provides abundant storage space for shale gas. Moreover, the feature also serves as the predominant channel for shale gas flow. Therefore, the widely developed graptolites should be considered as one of the essential factors controlling enrichment and high productivity of shale gas in the Wufeng–Longmaxi Formations. Keywords: Shale gas, Graptolites, Longmaxi formation, Organic pore, Organic enrichment, Reservoir, Sichuan basin

Based on various test data, the composition, texture, structure and lamina types of gas-bearing shale were determined based on Well Wuxi 2 of the Silurian Longmaxi Formation in the Sichuan Basin. Four types of lamina, namely organic-rich lamina, organic-bearing lamina, clay lamina and silty lamina, are developed in the Longmaxi Formation of Well Wuxi 2, and they form 2 kinds of lamina set and 5 kinds of beds. Because of increasing supply of terrigenous clasts and enhancing hydrodynamics and associated oxygen levels, the contents of TOC and brittle mineral reduce and content of clay mineral increases gradually as the depth becomes shallow. Organic-rich lamina, organic-rich + organic-bearing lamina set and organic-rich bed dominate the small layers 1-3 of Member 1 of the Longmaxi Formation, suggesting anoxic and weak hydraulic depositional setting. Organic-rich lamina, along with organic-bearing lamina and silty lamina, appear in small layer 4, suggesting increased oxygenated and hydraulic level. Small layers 1-3 are the best interval and drilling target of shale gas exploration and development. Key words: Sichuan Basin, Longmaxi Formation, fine-grained sediment, shale gas, lamina, Well Wuxi 2

In the Carboniferous–Permian period, several organic-rich black shales were deposited in a marine–continental transitional environment in the Linfen area on the eastern margin of the Ordos Basin. Integrated sedimentological and organic geochemical analyses are performed on an outcrop in order to clarify the relationship between paleoenvironment and organic matter accumulation. The results of this study show that the marine–continental transitional strata of the Upper Carboniferous Benxi Formation to Lower Permian Taiyuan and Shanxi Formation exposed in the Linfen area are composed of sandstone, shale, coal, and limestone. Total organic carbon (TOC) contents of the studied samples were mainly distributed in the range of 0.59%–35.4%, with an average of 7.32%. From Benxi Formation to Shanxi formation, the humidity gradually increased, and the climate gradually changed from hot and humid to warm and humid during Carboniferous to Permian. The deposition of the Shanxi Formation ended with the climate returning to hot and humid, having an oxic-suboxic conditions and a high paleoproductivity. Paleoredox conditions and paleoproductivity are the two vital factors controlling the formation of organic matter in black shales. The transitional environment characterized by oxic-suboxic, relatively high deposition rate, and various source of organic matter, although different from the marine environment, provides a good material basis for the deposition of organic-rich shales.

The development of shale gas in the United States has made a breakthrough, profoundly changed the pattern of oil and gas supply. It created the “shale gas revolution” on a global scale. Based on the practice of shale gas development in China and abroad, this paper aims to: (1) Summarize 5 basic characteristics, which are shale gas resource distribution, reservoir space, sweet spot area (section), hydrocarbon type and development mode. (2) Divide China shale development into three stages: scientific exploration, technological breakthrough and mature development. The United States is divided into three stages: scientific exploration, technological breakthrough and mature development. The United States is divided into three stages: scientific exploration, technological breakthrough and mature development. (3) Identify 4 challenges in the future development of China shale gas industry. It includes non-marine shale gas potential, core technology and equipment for resource deep than 3500 m, complex surface “factory mode” production, human geography and other non-technical factors. (4) Process economic evaluation under the conditions of government financial subsidies. China's shale gas project FIRR is about 8.0%–9.0%. Considering the global shale gas resources, consumer demand and other factors, it global shale gas production is expected to reach 1.1 × 1012m3 by 2040. Keywords: Shale gas, Black shale, Shale gas revolution, Nano pore, Sweet spot area, Sweet spot section, Artificial gas reservoir

In this paper, the shale of Upper Ordovician Wufeng FmâLower Silurian Longmaxi Fm was taken as an example to reveal the distribution patterns and the main sedimentation controlling factors of high-quality shale in the Upper Yangtze region. This study was made from the aspects of plate movement, fluctuation of sea level, palaeo-productivity, deposition rate and paleogeographic environment, based on the field outcrop sections and drilling data of the southern Sichuan Basin, together with geochemical element testing and biostratigraphical analysis results. The following findings were obtained. First, the collision and joint of Yangtze Plate and its periphery plates and the intra-plate deformation were gentle in the early stage, strong in the late stage, gentle in northwest and strong in southeast, so the sedimentation center in the Upper Yangtze region migrated to the northwest and the closure of sea area in the southern Sichuan Basin changed from weak in early stages to strong in late stages. Second, at the turning period from Ordovician to Silurian, sea levels presented the cycle change of deepâshallowâdeepâshallow. Due to the combination of high sea levels and a stable ocean basin in early stages, an extensive anoxic tectonic sedimentary space favorable for organic matters preservation was formed in the sea floor. Third, due to the effect of tectonic movements and sea closure, palaeo-productivity of sea areas in the southern Sichuan Basin presented a trend of being high in the early stage and low in the late stage, and the deposition rate was also low in the early stage and high in the late stage. And fourth, extensive deposition and distribution of shale rich in organic matters and silica was mainly controlled by a stable sea basin with a low subsidence rate, a relatively high sea level, semi-closed waters and low deposition rates. To sum up, the high-quality shale in the Upper Yangtze region is characterized by multiphase superimposition, lateral extension and northwestward renewal of sedimentary ages, and it is mainly deposited in WufengâRhuddanian age and secondarily in Aeronian age. The main exploration layers are WufengâRhuddanian in southernâeastern Sichuan Depression, RhuddanianâAeronian in Weiyuan area, and WufengâTelychian in centralânorthern Sichuan Basin. Keywords: Upper Yangtze region, Late OrdovicianâEarly Silurian, High-quality shale, Bentonite, Sea level, Palaeo-productivity, Deposition rate, Main exploration layers, Southern Sichuan Basin

The reservoir characteristics of the Upper Ordovician Wufeng-Lower Silurian Longmaxi Formations in southern Sichuan Basin were preliminarily revealed in this study by identifying and quantitatively evaluating the fracture pores of five appraisal wells in the central and northern parts of the southern Sichuan Depression by several methods. Four conclusions were reached as follows: (1) In the central zone of the Depression, the deep reservoir space of the Wufeng-Longmaxi producing pay is composed mainly of matrix pores and the microcracks are not common, whether on the local structural highs, flanks or lows. The physical properties are similar to that of the matrix pores in Changning, Weiyuan and Fuling gas fields. (2) In the northern zone of the Depression, the deep reservoir space of the Wufeng-Longmaxi black shale is composed mainly of matrix pores, and fracture pores mainly occur in local discrete intervals, with a total porosity range from 3.5% to 6.7%, on average 5.3%, and fracture porosity of 0-2.1%, on average 0.3%. (3) In the central and northern parts of the southern Sichuan Depression, the Wufeng-Longmaxi producing pays have undeveloped fracture pores and chiefly extensively distributed matrix pores, indirectly indicating relatively stable tectonic activities and corresponding weaker reservoir reworking there than Fuling field located in eastern Sichuan Basin. (4) The size and distribution of the gypsum-salt layer in the Cambrian are the key controlling factors of fracture pore development in the Wufeng-Longmaxi Formations. Therefore, the areas including Wellblocks L7, GS1, eastern Sichuan Basin and western Hubei province, where gypsum-salt layer in the Cambrian is thick and stable, and fracture intervals are likely to occur in the Wufeng-Longmaxi producing pay controlled by decollement structure above salt structure since the Yanshan Movement, are the potential favorable areas for fracture pore development. Key words: Sichuan Basin, southern Sichuan Depression, shale gas, Upper Ordovician Wufeng Formation, Lower Silurian Longmaxi Formation, matrix pore, fracture pore, gypsum-salt layer, decollement

The source rocks and reservoirs in the Middle Permian Lucaogou Formation of Jimusar sag, Junggar Basin, NW China and its source-reservoir assemblages were studied to reveal accumulation mechanism of the tight oil, on the basis of core observation, thin slice identification, X-ray diffraction analysis, TOC test and rock pyrolysis test of source rock samples, and mercury injection and nuclear magnetic resonance of reservoir samples, combined with burial history and hydrocarbon-generating history of source rocks. It is concluded that the Lucaogou Formation source rocks mainly have type I and II organic matter, with an average TOC of 4.6%, indicating they are high-quality source rocks in low mature – mature stage; and they can be divided into three types, shale, mudstone and silty mudstone. The reservoir rock in Lucaogou Formation features low porosity and low permeability; mercury injection and NMR (nuclear magnetic resonance) tests show that nano-scale pores and throats (with radius of 50−500 nm) constitute the main reservoir space, and the reservoirs can be classified into three types, muddy siltstone, dolomitic siltstone, and dolarenite according to lithology. The source rocks and reservoirs alternate with each other in vertical direction and are distributed continuously in lateral direction, and the source rocks have been generating oil and gas constantly. It is concluded through comprehensive analysis that since the Late Jurassic, the source rocks in Lucaogou Formation have been generating oil continuously and massively, causing high pressurization, and providing constant driving force and oil supply, as a result, the oil has been charged into the tight reservoirs effectively and continuously, forming abundant tight oil resources. Key words: tight oil, accumulation mechanism, source rock, reservoir, Permian Lucaogou Formation, Jimusar sag, Junggar Basin

From the aspects of shale gas resource condition, main exploration and development progress, important breakthrough in key technologies and equipment, this paper systematically summarized and analyzed current situation of shale gas development in China and pointed out five big challenges such as misunderstandings, lower implementation degree and higher economic uncertainty of shale gas resource, and still no breakthrough in exploration and development core technologies and equipment for shale gas buried depth more than 3500 m, higher cost and other non-technical factors that restrict the development pace. Aiming at the above challenges, we put forward five suggestions to promote the shale gas development in China: (1) Make strategies and set goals according to our national conditions and exploration and development stages. That is, make sure to realize shale gas annual production of 20 × 109 m3, and strives to reach 30 × 109 m3. (2) Attach importance to the research of accumulation and enrichment geological theory and exploration & development key engineering technologies for lower production and lower pressure marine shale gas reservoir, and at the same time orderly promote the construction of non-marine shale gas exploration & development demonstration areas. (3) The government should introduce further policies and set special innovation funds to support the companies to carry out research and development of related technologies and equipment, especially to strengthen the research and development of technology, equipment and process for shale gas bellow 3500 m in order to achieve breakthrough in deep shale gas. (4) Continue to promote the geological theory, innovation in technology and management, and strengthen cost control on drilling, fracturing and the whole process in order to realize efficient, economic and scale development of China's shale gas. (5) Reform the mining rights management system, establish information platform of shale gas exploration and development data, and correctly guide the non-oil and gas companies to participate in shale gas exploration and development.

A comprehensive analysis was carried out on the geochemical characteristics of 15 shale gas samples from the Changning area to study the carbon isotopic composition features of shale gas and the reversal cause of carbon isotopic composition in post-mature shale gas in the Silurian Longmaxi Formation of the Changning area, Sichuan Basin. Through the analysis of alkane gas component and carbon isotopic composition, combining with the research on carbon isotopic composition from the Longmaxi Formation of the Fuling and Weiyuan areas in Sichuan Basin, the methane from the Longmaxi Formation shale gas accounts for 97.11% to 99.45%, the average gas wetness is 0.49% representing typical dry gas, abnormal average δ13C1 value as −28.2‰ and the average of δ13C2 values is −33.2‰, in view of sapropel-type kerogen, the Longmaxi Formation shale gas belongs to the typical oil-associated gas. With the increasing degree of thermal evolution, the wetness of shale gas decreases gradually, and carbon isotopic composition of methane becomes heavier, and the carbon isotopic composition of ethane and propane will reverse, but the carbon isotopic composition of ethane and propane in the post-mature shale gas of the Changning area stays in the post-stage of reverse and will not get continuously heavier. The abnormal heavy carbon isotopic composition of methane and the reversal phenomenon of carbon isotopic (δ13C1>δ13C2>δ13C3) mainly generate from the secondary cracking effect in the post-mature stage and reactions between ethane with ferrous metals and water under Reileigh fractionation situation. Furthermore, the high temperature is also one of the important influence factors. Key words: Sichuan Basin, Changning area, Silurian Longmaxi Formation, shale gas, carbon isotope

Over-high maturity is one of the most vital characteristics of marine organic-rich shale reservoirs from the Lower Paleozoic in the south part of China. The organic matter (OM) in shale gas reservoirs almost went through the entire thermal evolution. During this wide span, a great amount of hydrocarbon was available and numerous pores were observed within the OM including kerogen and solid bitumen/pyrobitumen. These nanopores in solid bitumen/pyrobitumen can be identified using SEM. The imaging can be dissected and understood better based on the sequence of diagenesis and hydrocarbon charge with the shape of OM and pores. In terms of the maturity process showed by the various typical cases, the main effects of the relationship between the reservoir porosity and organic carbon abundance are interpreted as follows: the change and mechanism of reservoirs properties due to thermal evolution are explored, such as gas carbon isotope from partial to complete rollover zone, wettability alteration from water-wet to oil-wet and then water-wet pore surface again, electrical resistivity reversal from the increasing to decreasing stage, and nonlinearity fluctuation of rock elasticity anisotropy. These indicate a possible evolution pathway for shale gas reservoirs from the Lower Paleozoic in the southern China, as well as the general transformation processes between different shale reservoirs in thermal stages.

This paper mainly discusses the industrialization progress, “sweet spot” evaluation criterion, E&P technologies, success experiences, challenges and prospects of China's shale gas. Based on the geologic and engineering parameters of the Fuling, Changning and Weiyuan shale gas fields in the Sichuan Basin, this paper points out that China's shale gas has its particularity. The discoveries of super-giant marine shale gas fields with high evolution degree (Ro=2.0%−3.5%) and ultrahigh pressure (pressure coefficient=1.3−2.1) in southern China is of important scientific significance and practical value to ancient marine shale gas exploration and development to China and even the world. It's proposed that shale gas “sweet spots” must be characterized by high gas content, excellent frackability and good economy etc. The key indicators to determine the shale gas enrichment interval and trajectory of horizontal wells include “four highs”, that is high TOC (>3.0%), high porosity (>3.0%), high gas content (>3.0 m3/t) and high formation pressure (pressure coefficient>1.3), and “two well-developed” (well-developed beddings and well-developed micro-fractures). It's suggested that horizontal well laneway be designed in the middle of high pressure compartment between the Upper Ordovician Wufeng Formation and Lower Silurian Longmaxi Formation. The mode of forming “artificial shale gas reservoir” by “fracturing micro-reservoir group” is proposed and the mechanisms of “closing-in after fracturing, limiting production through pressure control” are revealed. Several key technologies (such as three-dimensional seismic survey and micro-seismic monitoring of fracturing, horizontal wells, “factory-like” or industrialized production mode, etc.) were formed. Some successful experiences (such as “sweet spot” selection, horizontal well laneway control, horizontal length optimization and “factory-like” production mode, etc.) were obtained. The four main challenges to realize large-scale production of shale gas in China include uncertainty of shale gas resources, breakthroughs in key technologies and equipment of shale gas exploration and development below 3 500 m, lower cost of production, as well as water resources and environment protection. It is predicted that the recoverable resources of the Lower Paleozoic marine shale gas in southern China are approximately 8.8×1012 m3, among which the recoverable resources in the Sichuan Basin are 4.5×1012 m3 in the favorable area of 4.0×104 km2. The productivity of (200−300)×108 m3/a is predicted to be realized by 2020 when the integrated revolution of “theory, technology, production and cost” is realized in Chinese shale gas exploration and development. It is expected in the future to be built “Southwest Daqing Oilfield (Gas Daqing)” in Sichuan Basin with conventional and unconventional natural gas production. Key words: shale gas field, economic sweet spot, micro gas reservoir, horizontal well, factory-like production, volume fracturing, development cost, resource potential, favorable target

Abstract: The stratigraphic distribution and lithofacies features of the Guanyinqiao Member of the Upper Ordovician Wufeng Formation around the Sichuan Basin were studied based on the data of drilling, outcrops, rock minerals, geochemistry and logging. The stratigraphic distribution of the Guanyinqiao Member is generally dominated by sea-level variation. This formation is in conformable contact with the overlying and underlying formations inside and locally outside the basin and is locally lost outside the basin. The Guanyinqiao Member is usually composed of deep-water siliceous shale and calcareous and siliceous shale facies, similar to those overlying and underlying lithologies inside the basin; and composed of shallow marl facies or lost, greatly different from the surrounding lithologies in the conformable area outside the basin. The study confirmed that the lithofacies of the Guanyinqiao Member is of great significance to the identification of the reservoir properties of the Wufeng and Longmaxi formations shale gas and to the selection of shale gas. The exploration and development of shale gas is promising in the depressions in the south, east and northeast of the Sichuan Basin, where good reservoirs are developed. The zone where the Guanyinqiao Member is lost has no “sweet spot” formation and is risky in exploring shale gas. The reservoir quality and exploration prospect of the Guanyinqiao Member marl zones are between the two zones mentioned above. Key words: Sichuan Basin, shale gas reservoir, exploration risk, Guanyinqiao Member, stratigraphic distribution, lithofacies feature, sedimentary environment

In the past five years, shale gas exploration and development has grown in a leaping-forward way in China. Following USA and Canada, China is now the third country where industrial shale gas production is realized, with the cumulative production exceeding 60 × 108 m3 until the end of 2015. In this paper, the main achievements of shale gas exploration and development in China in recent years were reviewed and the future development prospect was analyzed. It is pointed out that shale gas exploration and development in China is, on the whole, still at its early stage. Especially, marine shale gas in the Sichuan Basin has dominated the recent exploration and development. For the realization of shale gas scale development in China, one key point lies in the breakthrough and industrial production of transitional facies and continental facies shale gas. Low–moderate yield of shale gas wells is the normal in China, so it is crucial to develop key exploration and development technologies. Especially, strictly controlling single well investment and significantly reducing cost are the important means to increase shale gas exploration and development benefits. And finally, suggestions were proposed in five aspects. First, continuously strengthen theoretical and technical researches, actively carry out appraisal on shale gas “sweet spots”, and gradually accumulate development basis. Second, stress on primary evaluation of exploration and development, highlight the effective implementation of shale gas resources, and control the rhythm of appraisal drilling and productivity construction. Third, highlight fine description and evaluation of shale gas reservoirs and increase the overall development level. Fourth, intensify the research on exploration and development technologies in order to stand out simple and practical technologies with low costs. And fifth, summarize the experiences in fast growth of shale gas exploration and development, highlight the demonstration and evaluation of key indicators, and try to achieve more breakthroughs and replacement in new areas, new domains and new strata.

Fractures and pores are important storage and percolation spaces in tight reservoirs, and the identification, characterization and quantitative evaluation on them are the key aspects and difficulties in shale gas reservoir evaluation. In view of this, quantitative evaluation was performed on the fracture porosity of organic-rich shale intervals of Longmaxi Fm, Lower Silurian, Sichuan Basin (Wufeng Fm, Upper Ordovician included), after a dual-porosity medium porosity interpretation model was built on the basis of drilling data of Fuling Gasfield and Changning gas block in the Sichuan Basin. And then, the following conclusions are reached. First, shale fracture porosity interpretation by using dual-porosity medium model is the effective method to evaluate quantitatively the fracture porosity of shale reservoirs, and the development of quantitative characterization techniques of marine shale reservoir spaces. Second, the matrix pore volume of the principal pay zones in this area and its constitution regions are stably distributed with matrix porosity generally in the range of 4.6%–5.4%. And third, the development characteristics of fracture porosity vary largely in different tectonic regions and indifferent wellblocks and intervals even in the same tectonic region, presenting strong heterogeneity in terms of shale reservoir storage and percolation properties. It is indicated by quantitative characterization of fractures and pores that there are two types of shale gas reservoirs in Wufeng Fm – Longmaxi Fm, Sichuan Basin, including matrix porosity + fracture type and matrix porosity type. The former are mainly developed in the areas with special structure settings and they are characterized by developed fracture pores, high gas content, high free gas content, thick pay zones and high single-well production rate. And in the Sichuan Basin, its distribution is possibly in a restricted range. The latter are characterized by high matrix porosity, undeveloped fracture porosity and medium–high single-well production rate. And it is predicted that marine shale gas is predominant in this basin.

The main factors controlling the enrichment and high yield of shale gas were analyzed based on the recent research progress of depositional model and reservoir characterization of organic-rich shale in China. The study determines the space-time comparison basis of graptolite sequence in the Upper Ordovician Wufeng Formation–Lower Silurian Longmaxi Formation and proposes the important depositional pattern of marine organic-rich shale: stable ocean basin with low subsidence rate, high sea level, semi-enclosed water body, and low sedimentation rate. Deposited in the stage of Late Ordovician-Early Silurian, the superior shale with thickness of 20−80 m and total organic carbon (TOC) content of 2.0%−8.4% was developed in large deep-water shelf environment which is favorable for black shale development. Based on the comparison among the Jiaoshiba, Changning and Weiyuan shale gas fields, it is believed that reservoirs of scale are mainly controlled by shale rich in biogenic silica and calcium, moderate thermal maturity, high matrix porosity, and abundant fracture. The shales in the Wufeng and Longmaxi formations are characterized by porosity of 3.0%−8.4%, permeability of 0.000 2×10−3−0.500 0×10−3 μm2, stable areal distribution of matrix pore volume and their constituents, great variation in fracture and pore characteristics among different tectonic regions as well as different well fields and different intervals in the same tectonic. The Cambrian Qiongzhusi shale features poor physical properties with the porosity of 1.5%−2.9% and the permeability of 0.001×10−3−0.010×10−3 μm2, resulted from the carbonization of organic matter, high crystallinity of clay minerals and later filling in bioclastic intragranular pores. Four factors controlling the accumulation and high production of shale gas were confirmed: depositional environment, thermal evolution, pore and fracture development, and tectonic preservation condition; two special features were found: high thermal maturity (Ro of 2.0%−3.5%) and overpressure of reservoir (pressure coefficient of 1.3−2.1); and two enrichment modes were summarized: “structural sweet spots” and “continuous sweet area”. Key words: shale gas, organic-rich shale, sedimentary model, reservoir characterization, sweet spot area, Jiaoshiba shale gas field, Changning shale gas field, Weiyuan shale gas field

A high-precision sedimentary environment study of the Lower Silurian Longmaxi Formation is an important subject for shale gas exploration and development in Sichuan Basin and its surrounding areas. On the basis of outcrops and drilling data, its isochronous stratigraphic framework was built according to a particular graptolite zone and an important marker bed, and lithofacies, paleontology, calcareous content, well logging, geochemistry and other geologic information were combined to describe the sedimentary microfacies of Longmaxi Formation and its stratigraphic sequence, sedimentary evolution process and high quality shale distribution features as follows: ① with regional diachronism of the top and the bottom, the Longmaxi Formation is divided into two third-order sequences (SQ1 and SQ2), of which SQ1 is mainly an abyssal sedimentary assemblage deposited in the marine transgression period, and SQ2 is a bathyal to shallow sea sedimentary assemblage deposited in the marine regression period; ② there are eight microfacies such as deep calcareous shelf and deep argillaceous shelf in this formation and the organic-rich shale was mainly deposited in the deep water area of SQ1; and ③ from SQ1 to SQ2, the depocenter moved from the depression area in southern-eastern to northern Sichuan Basin, but the central Sichuan uplift remained an underwater one. It is concluded from this study that: ① shale gas production layers were mainly deposited in SQ1, the southern-eastern depression area was the depocenter in SQ1 and a shale gas enrichment area; and ② black shale in northern Sichuan was deposited in late SQ2, with limited distribution and relatively insufficient exploration potential, but the potential of shale gas exploration in western Hubei area is between southern-eastern and northern Sichuan Basin.

The Sichuan Basin, a hotspot and one of the most successful areas for shale gas exploration and development, can largely reflect and have a big say in the future prospect of shale gas in China. Through an overall review on the progress in shale gas exploration and development in the Sichuan Basin, we obtained the following findings: (1) the Sichuan Basin has experienced the marine and terrestrial depositional evolution, resulting in the deposition of three types of organic-matter-rich shales (i.e. marine, transitional, and terrestrial), and the occurrence of six sets of favorable shale gas enrichment strata (i.e. the Sinian Doushantuo Fm, the Cambrian Qiongzhusi Fm, the Ordovician Wufeng–Silurian Longmaxi Fm, the Permian Longtan Fm, the Triassic Xujiahe Fm, and the Jurassic Zhiliujing Fm); (2) the five key elements for shale gas accumulation in the Wufeng-Longmaxi Fm are deep-water shelf facies, greater thickness of organic-rich shales, moderate thermal evolution, abundant structural fractures, reservoir overpressure; and (3) the exploration and development of shale gas in this basin still confronts two major challenges, namely, uncertain sweet spots and potential prospect of shale gas, and the immature technologies in the development of shale gas resources at a depth of more than 3500 m. In conclusion, shale gas has been discovered in the Jurassic, Triassic and Cambrian, and preliminary industrial-scale gas has been produced in the Ordovician-Silurian Fm in the Sichuan Basin, indicating a promising prospect there; commercial shale gas can be produced there with an estimated annual gas output of 30–60 billion m3; and shale gas exploration and production experiences in this basin will provide valuable theoretical and technical support for commercial shale gas development in China.

In recent years, a lot of work on the development of oil shale has been done with regard to the Chinese oil shales. However, the research is mainly with respect to the processing aspects of oil shale. The pyrolysis mechanism of oil shale has been limited, to some extent, by instrumentation and analytical techniques. In this paper, pyrolysis kinetics characteristics of oil shale samples obtained from Mudanjiang were investigated by Rock-Eval analysis. The weight loss data, pyrolysis mechanism, and properties of oil shale were analyzed at different heating rates (10, 15, 20, 25, 30℃/min) in the temperature range from 200 to 600℃. In this paper, a distribution function of apparent activation energy and a relationship equation of apparent energy with frequency factor have been obtained. A special kinetic model was developed, fully suitable for the pyrolysis characteristics of oil shale. This model was also verified by experiment. Throughout the analysis of pyrolysis kinetics, it was observed that the pyrolysis reaction mechanism at different temperatures could be explained. The results may provide the theoretical basis for further effective and economical exploitation of oil shale.

Rock brittleness is now one of the significant parameters for geological evaluation of shale gas reservoirs due to the wide application of hydraulic fracturing in shale gas development. Currently, the evaluation of shale brittleness is generally based on mineral composition or elastic parameters, which both derive from the exploration experiences in North America. Due to the easier access of mineral composition data through x-ray diffraction method than rock mechanical data through array sonic logging method, the mineral-based brittleness indices have stronger practicability. However, there is not a unified definition of brittle minerals yet, which now usually refers to quartz or quartz and carbonate minerals. Considering the specific conditions of Wufeng–Longmaxi Formation in Southern Sichuan Basin; depositional environment of calcareous shelf; and higher content of calcite, dolomite, and pyrite, we redefined brittle minerals according to the elastic parameters of each mineral, taking quartz, dolomite, and pyrite which best satisfy the standard of “Young’s modulus>30 GPa and Poisson’s ratio

Research on major controlling factors of the high-quality shale in Upper Ordovician Wufeng–Lower Silurian Longmaxi Formation is a major subject. Based on the information of outcrops and drilling data acquired from Southern Sichuan combined with geochemical elemental analysis and biostratigraphy, this paper analyzed the sedimentary characteristics of Wufeng–Longmaxi organic-rich shale in Sichuan Basin, including plate movements, fluctuation of sea level, paleoproductivity, deposition rates, and paleogeographic environment, and revealed the distribution and sedimentary controlling factors of high-quality shale. Four preliminary conclusions were drawn: (1) The collision and joint of Yangtze Plate and its periphery plates, as well as the intraplate deformation, were gentle in early stage, strong in late stage, gentle in northwest, while strong in southeast, thus forming the northwestward migration of sedimentation center in Sichuan Basin, and the evolution of southern Sichuan sea closeness from weak to strong. (2) Sea level changed following the cycle of deep→shallow→deep→shallow at the turn of Ordovician–Silurian. High sea level and stable ocean basin in early stage created extensive anoxic tectonic sedimentary space which was in favor of organic matter preservation. (3) Influenced by tectonic movements and sea closeness, paleoproductivity of Southern Sichuan marine presented the trend of high in early stage and low in late stage, while the deposition rate also changed from slow in the early stage to fast in the late stage. (4) Extensive deposition and distribution of organic-rich silicic shale was mainly controlled by stable sea basin of low deposition rate, relatively high sea level, semienclosed water, and low deposition rate. The research showed that the high-quality shale in Sichuan Basin is characterized by multiphase superimposition, horizontal extension, and northwest renewal of sedimentary age; Wufeng–Rhuddanian is the main depositional period of high-quality shale, Aeronian comes next; the main exploration layers are Wufeng–Rhuddanian in southern–eastern Sichuan depression, Rhuddanian–Aeronian in Weiyuan, and Wufeng–Telychian in central-northern Sichuan.

Searching for some reliable evidences that can verify the carbonification of organic matters in marine shales is a major scientific issue in selecting shale gas fairways in old strata. To this end, based on core, logging and testing data, the electric property of two organic-rich shale layers in the Lower Cambrian Qiongzhusi Fm. and the Lower Silurian Longmaxi Fm. in the southern Sichuan Basin was compared to examine the carbonification signs of organic matters in the Qiongzhusi shale and its influence on gas occurrence in the shales. The following conclusions were reached: (1) the electric property experiment shows that the Qiongzhusi shale in the study area has had carbonification of organic matters. The low resistivity of dry samples from this highly mature organic-rich shale and ultra-low resistivity on downhole logs can be used to directly judge the degree of organic matter carbonification and the quality of source rocks; (2) in the Changning area, the Qiongzhusi shale shows low resistivity of dry samples and low to ultra-low resistivity on logs, indicating that organic matters are seriously carbonized, while in the Weiyuan area, the Qiongzhusi shale shows a basically normal resistivity on log curves, indicating its degree of graphitization between the Longmaxi Fm. and Qiongzhusi Fm. in the Changning area; (3) shale with medium-to-high resistivity is remarkably better than that with ultra-low resistivity in terms of gas generation potential, matrix porosity and gas adsorption capacity; (4) industrial gas flow has been tested in the organic shales with medium-to-high resistivity in the Jianwei–Weiyuan–Tongnan area in the north, where the Qiongzhusi shale is a favorable shale gas exploration target.

Based on the latest global conventional-unconventional petroleum development situation and the conclusion of petroleum geology theory and technology innovation in recent 10 years, the connotation of conventional and unconventional petroleum “orderly accumulation” connotation is formulated. This concept indicates that, unconventional petroleum occurs in the hydrocarbon supply direction of conventional petroleum, and conventional petroleum may appear in the outer space of unconventional petroleum. Proper evaluation methods and engineering technology are important to push the conventional-unconventional petroleum co-development, and the petroleum finding thought from outer-source into inner-source. Unconventional petroleum evaluation focuses on source rocks characteristics, lithology, physical property, brittleness, oil-gas possibility and stress anisotropy. Taking shale gas for examples, in China, these six properties are TOC>2%, laminated silicious calcareous shale or calcareous silicious shale, porosity 3%-8%, brittle minerals content 50%-80%, gas content 2.3-4.1 m3/t, pressure coefficient 1.0-2.3, natural fractures; in north America, these six properties are TOC>4%, silicious shale or calcareous shale or marl, porosity 4%-9%, brittle minerals content 40%-70%, gas content 2.8-9.9 m3/t, pressure coefficient 1.3-1.85, natural fractures. “Sweet spot area” assessment, “factory-like” operation pattern and other core evaluation methods and technologies are discussed. And 8 key elements of unconventional “sweet spot area” are proposed, 3 of them are TOC>2% (for shale oil S1>2 mg/g), higher porosity (for tight oil & gas >10%, shale oil & gas >3%), and microfractures. Multiple wells “factory-like” operation pattern is elaborated, and its implementation needs 4 elements, i.e. batch well spacing, standard design, flow process, and reutilization. Through horizontal well volume fractures in directions, “man-made reservoirs” with large-scale fracture systems can be formed underground. For “shale oil revolution” in future, non-water “gas in critical state” and etc. fracturing fluid and matching technology should be stressed to be industrially tested and encouraged to be low cost developed. Key words: unconventional petroleum, “orderly accumulation”, co-development, “sweet spot area” assessment, “factory-like” operation pattern, “man-made reservoir”, tight oil, shale oil, shale gas, tight gas, petroleum exploration into source rocks

Shale gas resources are abundant in China and have been discovered in some areas. They are widely distributed in the Cambrian, Ordovician and Silurian strata in Southern China, with technically recoverable resources accounting for 3/4 of the whole country. The Southern China will be the main area for shale gas development. Compared with North America, there are a lot of differences in shale gas exploration and development in Southern China which include intensive tectonic movements in marine shale, complex stress field, deep burial depth, special surface condition, etc. With those, it could be ineffective if the existing theories and techniques of shale gas developed in America are taken for granted. The nano-pore formation effects on shale gas production are unclear; Prediction methods for shale gas production have not been established; In the process of drilling, the horizontal section collapses seriously and the drilling cycle is too long; Stimulation effect is not ideal, with low single well production. In order to effectively develop shale gas in Southern China, three scientific issues should be studied which include quantitative characterization of nano-pore formation and multi-scale storage space, mechanisms of nonlinear flow under multi-field coupling in complex medium, mechanical mechanisms of shale instability and fracture network formation. Key words: shale gas, effective development, scientific issue, southern marine shale, nano-pore

According to the latest drilling data, the geologic survey of surrounding outcrops and the laboratory test results of rock samples, this paper studies the regional distribution, geochemical and reservoir characteristics and gas concentration of organic-rich shales to reveal the shale gas generation and potential of the Lower Cambrian Qiongzhusi Formation of the Southern Sichuan Basin. The study area features high organic content (with TOC between 0.55% and 25.7%, average of more than 2%), great net shale thickness (of 60–300 m), high brittle mineral content (over 40%), abundant micro- and nanometer-sized pores and micro-fractures, and high gas content (0.27–6.02 m3/t, average of 1.90 m3/t), which is in favor of the generation and accumulation of shale gas. The Lower Cambrian Qiongzhusi Formation is one of the most favorable strata which has frequent gas show and industrialization breakthrough during drilling, and the Weiyuan and Xunyong-Junlian areas are two most realistic and favorable targets for shale gas exploration and development. Key words: Southern Sichuan Basin, Lower Cambrian, Qiongzhusi Formation, shale gas, accumulation, resource potential

With Sichuan Basin as focus, this paper introduces the depositional environment, geochemical and reservoir characteristics, gas concentration and prospective resource potential of three different types of shale in China: marine shale, marine-terrigenous shale and terrigenous shale. Marine shale features high organic abundance (TOC: 1.0%–5.5%), high-over maturity (Ro: 2%–5%), rich accumulation of shale gas (gas concentration: 1.17–6.02 m3/t) and mainly continental shelf deposition, mainly distributed in the Paleozoic in the Yangtze area, Southern China, the Paleozoic in Northern China Platform and the Cambrian-Ordovician in Tarim Basin; Marine-terrigenous coalbed carbonaceous shale has high organic abundance (TOC: 2.6%–5.4%) and medium maturity (Ro: 1.1%–2.5%); terrigenous shale in the Mesozoic and Cenozoic has high organic abundance (TOC: 0.5%–22.0%) and mid-low maturity (Ro: 0.6–1.5%). The study on shale reservoirs in the Lower Paleozoic in Sichuan Basin discoveried nanometer-sized pores for the first time, and Cambrian and Silurian marine shale developed lots of micro- and nanometer-sized pores (100–200 nm), which is quite similar to the conditions in North America. Through comprehensive evaluation, it is thought that several shale gas intervals in Sichuan Basin are the practical targets for shale gas exploration and development, and that the Weiyuan-Changning area in the Mid-South of Sichuan Basin, which is characterized by high thermal evolution degree (Ro: 2.0%–4.0%), high porosity (3.0%–4.8%), high gas concentration (2.82–3.28 m3/t), high brittle mineral content (40%–80%) and proper burial depth (1500–4500 m), is the core area for shale gas exploration and development, the daily gas production for Well Wei 201 is 1×104–2×104 m3. 摘要: ： 以四川盆地为重点，介绍中国海相、海陆过渡相、陆相三大类型页岩形成的沉积环境、地球化学与储集层特征、含气量与远景资源量。中国海相页岩是一套高有机质丰度（TOC为1.0%～5.5%）、高—过成熟（Ro值为2.0%～5.0%）、富含页岩气（含气量1.17～6.02 m3/t）、以陆棚相为主的沉积，主要分布在华南扬子地区古生界、华北地台古生界和塔里木盆地寒武系—奥陶系；海陆过渡相煤系炭质页岩有机质丰度高（TOC为2.6%～5.4%）、成熟度适中（Ro值为1.1%～2.5%）；中新生界陆相页岩有机质丰度高（TOC为0.5%～22.0%）、低熟—成熟（Ro值为0.6%～1.5%）。在对四川盆地下古生界页岩储集层研究中首次发现，寒武系和志留系海相页岩发育大量与北美地区相似的微米—纳米级孔隙。综合评价认为四川盆地发育的多套页岩气层系是勘探开发的现实领域，四川盆地中南部威远—长宁等地区的寒武系和志留系是页岩气勘探开发的核心区与层系，其特点是：热演化程度较高（Ro值为2.0%～4.0%）、孔隙度较高（3.0%～4.8%），含气量较高（2.82～3.28 m3/t）、脆性矿物含量较高（40%～80%）、埋深适中（1 500～4 500 m），有利于开采。图7表7参38 Key words: unconventional hydrocarbon, shale gas, nanometer-sized pore throat, shale oil, tight oil, source rock hydrocarbon, core area