Search

Abstract The demand for larger and lighter mechanisms for next-generation space missions necessitates using deployable structures. High-strain fiber polymer composites show considerable promise for such applications due to their exceptional strength-to-weight ratio, manufacturing versatility, packaging efficiency, and capacity for self-deployment using stored strain energy. However, a significant challenge in using composite deployable structures for space applications arises from the unavoidable extended stowage periods before they are deployed into their operational configuration in orbit. During the stowage period, the polymers within the composites experience material degradation due to their inherent viscoelastic and/or plastic properties, causing stress relaxation and accumulation of plastic strains, thereby reducing the deployment capability and resulting in issues related to recovery accuracy. This paper aims to give a state-of-the-art review of recent advances in the design, modeling, and manufacturing of high-strain composites for deployable structures in space applications, emphasizing the long-term stowage effects. This review is intended to initiate discussion of future research to enable efficient, robust, and accurate design of composite deployable structures that account for the enduring challenges posed by long-term stowage effects.

With the increasing demands of ultra-large space antennas, on-orbit assembly stands out as a promising solution. However, this achievement necessitates the reconfiguration design of the whole antenna structure to maintain structural integrity and stability. In light of this challenge, a novel rapid design method is proposed for the unit configuration of modular-assembled antennas in this paper. The method utilizes an inscribed regular hexagon, which is positioned within a horizontal topological circle. The hexagon is subsequently projected onto a spinning paraboloid, resulting in the creation of unit nodes that conform to the shape of the paraboloid. The configuration of the unit topology is then determined based on the arrangement of these nodes. By using the method, two units of space-assembled antennas are designed. The topology design of the cable network is carried out for the modular unit. The pretensions of the cables are calculated. The results of the case study reveal that the developed modular units fulfill the requirements of the on-orbit-assembly antenna structure and can solve the engineering application difficulties of this type of antenna.

Testing and vaccination have been major components of the strategy for combating the ongoing COVID-19 pandemic. In this study, we have developed a quantitative anti-SARS-CoV-2 spike (S1) IgG antibody assay using a fingerstick dried blood sample. We evaluated the feasibility of using this high-throughput and quantitative anti-SARS-CoV-2 spike (S1) IgG antibody testing assay in vaccinated individuals. Fingerstick blood samples were collected and analyzed from 137 volunteers before and after receiving the Moderna or Pfizer mRNA vaccine. Anti-SARS-CoV-2 S1 IgG antibody could not be detected within the first 7 days after receiving the first vaccine dose, however, the assay reliably detected antibodies from day 14 onwards. In addition, no anti-SARS-CoV-2 nucleocapsid (N) protein IgG antibody was detected in any of the vaccinated or healthy participants, indicating that the anti-SARS-CoV-2 S1 IgG assay is specific for the mRNA vaccine-induced antibodies. The S1 IgG levels detected in fingerstick samples correlated with the levels found in venous blood plasma samples and with the efficacy of venous blood plasma samples in the plaque reduction neutralization test (PRNT). The assay displayed a limit of quantification (LOQ) of 0.59 μg/mL and was found to be linear in the range of 0.51-1000 μg/mL. Finally, its clinical performance displayed a Positive Percent Agreement (PPA) of 100% (95% CI: 0.89-1.00) and a Negative Percent Agreement (NPA) of 100% (95% CI: 0.93-1.00). In summary, the assay described here represents a sensitive, precise, accurate, and simple method for the quantitative detection and monitoring of post-vaccination anti-SARS-CoV-2 spike IgG responses.

Hydrochlorofluorocarbons (HCFCs) are greenhouse gases and ozone-depleting substances, and existing HCFC emission studies lack a comprehensive study of multiple HCFCs in a single consumption sector. China is a large producer and consumer of HCFCs. The HCFC bank in foam sector in 2019 accounted for 91.3% of the national total, and foam sector was also the second largest source of HCFC emissions. Therefore, the estimation of HCFC emissions and banks for the foam sector is quite important. In this study, the multiple HCFC emission inventory for foam sector in eastern China from 2000 to 2019 was first established by using the bottom-up method. The results showed that the HCFC emissions and bank were 14.9 kt and 453.5 kt in 2019. HCFC-141b used in the polyurethane (PU) foam sector had the largest annual emissions, cumulative emissions, and bank due to its high consumption. The total emissions of HCFC-22 and HCFC-142b used in the extruded polystyrene (XPS) foam sector were similar to those of HCFC-141b. The HCFC emissions from the foam sector were mainly distributed among the three provinces of Jiangsu, Zhejiang, and Shandong. The cumulative GWP- and ODP-weighted emissions of HCFCs were 240.6 Mt CO _2 -eq and 14.3 kt CFC-11-eq, respectively. The results showed that in order to response to climate change or ozone depletion, we should prioritize the emission reduction of HCFC-22 and XPS foam sector, or HCFC-141b and PU foam sector.

Termites can cause severe economic damage in households, reservoirs, agriculture, and forests. Monitoring termite activity plays an important role in integrated termite management. A device for the automatic monitoring of termites with high accuracy and reliability is highly demanded. Here, we introduce Dekan electromagnetic induction with non-looping (DEMINL) method and a novel wireless system for the monitoring of termite activities. The system comprises of a termite bait station and a handheld reader. While the wood pieces in the bait station were consumed by termites, the device could generate alarm signals, which are sent to a signal reader (receiver) through radio frequency identification (RFID) and displayed on the handheld reader’s screen. Field tests at three locations over a two-year period showed an accurate detection rate of 97.5–98.5%. The DEMINL-based device demonstrated high accuracy and durability in detecting termites, making it suitable for termite monitoring in households, crop fields, forests, and reservoirs.

In this study, we analyzed the components of Mentha spp. essential oils (EOs) and evaluated their major constituents and binary combinations against Reticulitermes dabieshanensis. We also determined the activities of esterases (ESTs), glutathione S-transferases (GSTs), and acetylcholinesterase activity (AChE) in treated insects. According to our findings, the most effective oils were those obtained from M. citrata (with the major constituent linalool constituting 45.1%), M. piperita (menthol, 49.1%), and M. spicata (carvone, 69.0%), with LC50 values of 0.176, 0.366, and 0.146 μL/L, respectively. The LC50 values were recorded for linalool (0.303 μL/L), followed by menthol (0.272 μL/L), and carvone (0.147 μL/L). The insecticidal potency increased with binary mixtures of major active constituents, with carvone strongly synergizing the toxicity of linalool and menthol against R. dabieshanensis. Compared to the control, except for M. citrata treated with no difference in α-NA or GST activity, the activities of ESTs and GST in other treatment groups were significantly increased. Additionally, our results found that Mentha spp. EOs and their major constituents inhibited the activity of AChE in vivo and in vitro. Finally, we performed a structure-based virtual screening of linalool, menthol, and carvone to identify that linalool had the greatest potential to bind to the active site of AChE. The present study suggests that Mentha spp. EOs could provide an additional approach for the management of termites over synthetic insecticides.

The escalation of anthropogenic heat emissions poses a significant threat to the urban thermal environment as cities continue to develop. However, the impact of urban spatial form on anthropogenic heat flux (AHF) in different urban functional zones (UFZ) has received limited attention. In this study, we employed the energy inventory method and remotely sensed technology to estimate AHF in Beijing’s central area and utilized the random forest algorithm for UFZ classification. Subsequently, linear fitting models were developed to analyze the relationship between AHF and urban spatial form indicators across diverse UFZ. The results show that the overall accuracy of the classification was determined to be 87.2%, with a Kappa coefficient of 0.8377, indicating a high level of agreement with the actual situation. The business/commercial zone exhibited the highest average AHF value of 33.13 W m−2 and the maximum AHF value of 338.07 W m−2 among the six land functional zones, indicating that business and commercial areas are the primary sources of anthropogenic heat emissions. The findings reveal substantial variations in the influence of urban spatial form on AHF across different UFZ. Consequently, distinct spatial form control requirements and tailored design strategies are essential for each UFZ. This research highlights the significance of considering urban spatial form in mitigating anthropogenic heat emissions and emphasizes the need for customized planning and renewal approaches in diverse UFZ.

Nasutitermes tiantongensis belongs to Nasutitermitinae and its mitochondrial genome was determined in this study. It consisted of 13 PCGs, 22 tRNAs, 2 rRNAs, and an A + T-rich control region, and its length was 15824 bp. The phylogenetic analysis suggested that the genus Nasutitermes was not monophyletic, and N. tiantongensis formed a sister group with Bultitermes laticephalus. The mitochondrial genome of N. tiantongensis provides a resource for evolutionary analysis within Nasutitermitinae.

Acyl carrier protein (ACP) is an acyl carrier in fatty acid synthesis and is an important cofactor of fatty acid synthetase. Little is known about ACP in insects and how this protein may modulate the composition and storage of fatty acids. We used an RNAi-assisted strategy to study the potential function of ACP in Hermetia illucens (Diptera: Stratiomyidae). We identified a HiACP gene with a cDNA length of 501 bp and a classical conserved region of DSLD. This gene was highly expressed in the egg and late larval instars and was most abundant in the midgut and fat bodies of larvae. Injection of dsACP significantly inhibited the expression level of HiACP and further regulated the fatty acid synthesis in treated H. illucens larvae. The composition of saturated fatty acids was reduced, and the percentage of unsaturated fatty acids (UFAs) was increased. After interfering with HiACP, the cumulative mortality of H. illucens increased to 68.00% (p < 0.05). H. illucens growth was greatly influenced. The development duration increased to 5.5 days, the average final body weights of larvae and pupae were decreased by 44.85 mg and 14.59 mg, respectively, and the average body lengths of larvae and pupae were significantly shortened by 3.09 mm and 3.82 mm, respectively. The adult eclosion rate and the oviposition of adult females were also severely influenced. These results demonstrated that HiACP regulates fatty acid content and influences multiple biological processes of H. illucens.

1,1,1,2-tetrafluoroethane (HFC-134a) is a potent greenhouse gas that can be degraded to produce trifluoroacetic acid (TFA), a degradation product that has an impact on aquatic ecology, so its emission has been a continuous concern worldwide. Existing studies mainly estimate the global- or national-scale emissions of HFC-134a, and there are relatively few studies on regional emissions, all of which used the top-down method. By establishing a regional-scale bottom-up emission inventory and comparing it with the regional-scale top-down estimation results, regional emissions can be verified and their emission characteristics and environmental impacts can be analysed. HFC-134 emissions were estimated for the first time in the North China Plain using the emission factor method, and spatiotemporal characteristics and environmental impacts were analysed for the period of 1995 to 2020. The results showed that the cumulative HFC-134a emissions were 88 (73–103) kt (126 Mt CO2-eq), which have led to an increase in global radiative forcing of 1.1 × 10−3 (0.9 × 10−3–1.3 × 10−3) W m−2, an increase in global surface temperature of 8.9 × 10−4 °C, and a cumulative TFA production of 7.5 (6.2–8.9) kt as of 2020. The major sources of HFC-134a emissions are the refrigeration and air conditioning sector, which involves the automotive air conditioning (MAC), industrial and commercial refrigeration, and air conditioning (ICR) sub-sectors. China joined the Kigali Amendment in 2021 to phase down HFCs and proposed the goal of carbon neutrality by 2060. The North China Plain is a region undergoing rapid economic development, with a relatively high proportion of GDP (29%) and car ownership (23%) in 2020. Additionally, HFC-134a emissions accounted for about 20% of the total emissions in China. Therefore, HFC-134a emissions and their environmental impact on the North China Plain should not be ignored.

This study aims to investigate cases of human plague in the Inner Mongolia Autonomous Region (IMAR), China, and to inform the development of plague prevention and control strategies. On 12th of November 2019, two herdsmen from Sunitezuo Banner, Xilingol League were diagnosed with pneumonic plague in Beijing, China. On November 16th, one resident of Xianghuang Banner, Xilingol League was diagnosed with bubonic plague in Huade County Hospital, Ulanqab, China. On 27th of November, one resident of Siziwang Banner was diagnosed with bubonic plague. In total, 78 close contacts were monitored over a period, but none of them developed symptoms. Plague outbreaks in animals had been reported in Sunitezuo Banner, Xianghuang Banner, and Siziwang Banner in 2019. Two of the four cases were related (husband and wife), but not the other two. All the cases may be associated with contact with rodents (hare) or infected fleas. The cases highlight the importance of early identification of plague cases in humans in order to stop further infection. This demonstrates the value of monitoring and ongoing vigilance on endemic diseases, the importance of updating medical training and raising public awareness about infectious diseases that even have not been observed over decades.

The volatile metabolites of Salvia sclarea, Rosmarinus officinalis, Thymus serpyllum, Mentha spicata, Melissa officinalis, Origanum majorana, Mentha piperita, Ocimum basilicum and Lavandula angustifolia were determined by gas chromatography–mass spectrometry. The vapor insecticidal properties of the analyzed essential oils and their compounds were screened using Reticulitermes dabieshanensis workers. The most effective oils were S. sclarea (major constituent linalyl acetate, 65.93%), R. officinalis (1,8-cineole, 45.56%), T. serpyllum (thymol, 33.59%), M. spicata (carvone, 58.68%), M. officinalis (citronellal, 36.99%), O. majorana (1,8-cineole, 62.29%), M. piperita (menthol, 46.04%), O. basilicum (eugenol, 71.08%) and L. angustifolia (linalool, 39.58%), which exhibited LC50 values ranging from 0.036 to 1.670 μL/L. The lowest LC50 values were recorded for eugenol (0.060 μL/L), followed by thymol (0.062 μL/L), carvone (0.074 μL/L), menthol (0.242 μL/L), linalool (0.250 μL/L), citronellal (0.330 μL/L), linalyl acetate (0.712 μL/L) and 1,8-cineole (1.478 μL/L). The increased activity of esterases (ESTs) and glutathione S-transferase (GST) were observed but only alongside the decreased activity of acetylcholinesterase (AChE) in eight main components. Our results indicate that S. sclarea, R. officinalis, T. serpyllum, M. spicata, M. officinalis, O. marjorana, M. piperita, O. basilicum and L. angustifolia essential oils (EOs) and their compounds, linalyl acetate, 1,8-cineole, thymol, carvone, citronellal, menthol, eugenol and linalool could be developed as control agents against termites.

Botanical pesticides are considered the most promising alternative to synthetic pesticides, considering their less negative impacts on the environment and human health. Here, we analyzed the components of lemongrass Cymbopogon citratus essential oil (EO) and evaluated its vapor activity against Reticulitermes flaviceps, in terms of the walking and gripping abilities of workers. In addition, the effects of lemongrass EO and its major component on the cuticular content and structure of chitin in termites were also observed. Our results indicate that cis-citral (36.51%) was the main constituent of lemongrass. In the vapor toxicity assay, the LC50 values of lemongrass EO and citral were 0.328 and 0.177 μL/L, respectively. When worker antennae were treated with lemongrass EO and citral, their walking and gripping capabilities were significantly inhibited. In addition, the cuticular content, thermal stability, and crystallinity of chitin in the termites were decreased after treatment with citral. Collectively, this study provides a basis for developing and utilizing lemongrass and citral as a new environment-friendly insecticide resource to control R. flaviceps.

Accurate estimation of lithium battery state of charge is very important for ensuring the operation of battery management system, realizing the energy management strategy of electric vehicles, reducing mileage anxiety and promoting the sustainable development of electric vehicles. In this paper, several studies are carried out for state of charge estimation of lithium-ion battery: (1) Aiming at the problem of parameter identification of battery model, an optimal identification method of model parameters based on ant lion optimization algorithm is proposed. (2) An adaptive weighting Cubature particle filter (AWCPF) method is proposed for SOC estimation. The proposed AWCPF method is based on particle filter (PF) algorithm, while the Cubature Kalman filter (CKF) algorithm is utilized to generate the proposal distribution for PF algorithm, which can retrain the particles degradation problem in PF algorithm. To solve the problem that the CKF algorithm is sensitive to noise, comparing with fixed sigma point weights of the conventional CKF, the weights of sigma points are adaptively adjusted based on state and measurement residual vectors. Furthermore, the process noise and measurement noise are estimated iterative. In this paper, experimental verification of different initial values of SOC under various working conditions is carried out. The results show that the proposed AWCPF algorithm based SOC estimation method has high estimation accuracy, strong robustness, fast convergence speed, with the maximum SOC estimation error is less than 1%.

The pandemic of novel coronavirus disease COVID-19 is rapidly expanding across the world. A positive result of antibody tests suggests that the individual has potentially been exposed to SARS-CoV-2, thus allowing to identify asymptomatic infections and determine the seroprevalence in a given population. The aim of this study was to evaluate the performances of a newly developed high throughput immunoassay for anti-SARS-CoV-2 IgM antibody detection on the Luminex MAGPIX platform. Clinical agreement studies were performed in 42 COVID-19 patient serum samples and 162 negative donor serum/plasma samples. Positive percent agreement (PPA) was 42.86% (95% CI: 9.90% to 81.59%), 71.43% (95% CI: 29.04% to 96.33%), and 28.57% (95% CI: 13.22% to 48.67%) for samples collected on 0-7 days, 8-14 days, and 2-8 weeks from symptom onset, respectively. Negative Percent Agreement (NPA) was 97.53% (95% CI: 93.80% to 99.32%). There was no cross-reactivity with the SARS-CoV-2 IgG antibody. Hemoglobin (200 mg/dL), bilirubin (2 mg/dL), triglyceride (250 mg/dL) and EDTA (10 mM) showed no significant interfering effect on this assay. In conclusion, an anti-SARS-CoV-2 IgM antibody assay with high sensitivity and specificity has been developed. With the high throughput, this assay will speed up the anti-SARS-CoV-2 IgM testing.

Following publication of the original article [1], the authors reported the following errors.

The mitochondrial genome of the Reticulitermes ovatilabrum is 15,913 bp in length and encodes 37 genes including 13 protein-coding genes (PCGs), 22 transfer RNA genes (tRNA), 2 ribosomal RNA genes (rRNA), and a non-coding control region (D-loop). The percentage of A/T (65.59%) is much higher than that of C/G (34.41%). The phylogenetic tree revealed that R. ovatilabrum was closest to R. kanmonensi and R. periflaviceps. The mitochondrial genome of the R. ovatilabrum provides a resource for evolutional analysis within termites especially Reticulitermes.

Ocean energy is a kind of renewable energy contained in seawater, which has the characteristics of large total reserves, sustainable use, and its being green and clean. Influenced by rising oil prices and global climate change, an increasing number of countries are attaching great importance to the strategic position of ocean energy in the future energy sector, and are formulating national ocean energy development roadmaps and conducting research and development on ocean energy technologies. Ocean current energy is a widely existing kind of ocean energy with abundant reserves. However, due to the low current velocity in most of the deep sea, low current energy has not been effectively exploited. In this paper, the Blade element momentum (BEM) theory based on Vortex column theory is used to design a special airfoil for low current energy applications, and a prototype turbine with rotor diameter of 4.46 m and tip speed ratio (TSR) of 6 is fabricated. In order to achieve stable electric power output, this paper designs a hydraulic conversion power generation control system with flexible control, and the hydraulic system working pressure designed to 21 MPa. In this paper, we conducted towing experiments on the prototype of an ocean current energy turbine, with hydraulic transmission and a control power generation system applied to the low flow rate, and achieved the target of hydraulic motor speed in the range of 14.7~15.9 r/min and steady-state speed accuracy in the range of ±1%. The research conducted in this paper can provide a research basis for the efficient exploitation of low-flow ocean current energy.

The Aphelinus asychis female adult is an important arrhenotocous parthenogenesis parasitoid of Myzus persicae, and its reproductive mode is beneficial for the population continuation of A. asychis by way of multiple mating and backcross. To explore the effect of mating on the population fitness and control efficiency of A. asychis, its mating frequency and backcross were observed under laboratory conditions. The results showed that most matings in A. asychis involved four distinct stages: courtship, pre-copulatory, copulation, and post-copulatory behaviours. Only the duration of courtship increased significantly with an increase in copulation frequency for females, and the courtship duration of A. asychis females mated with different males were significantly shorter than those mated with the same male at the same mating times, which suggested that A. asychis females might prefer to mate with different males to enrich the genotype of their offspring. The total number of mummified aphids and the female and male longevity decreased significantly with an increase in mating frequency. On the contrary, female progenies increased significantly with an increase of mating frequency, suggesting that sperm limitation might occur in females when they only mated once. These results imply that females might prefer to receive more sperm by mating multiple times in their life span. In addition, we found that the intrinsic rate of increase (r) of A. asychis of the control group (0.2858 d−1) was significantly greater than that in the backcross treatment (0.2687 d−1). The finite killing rate (θ) of A. asychis of the control group was similar to that in the backcross treatment, which showed that this treatment had a negligible negative effect on the control efficiency of A. asychis. In conclusion, the results showed that multiple mating increased the number and proportion of A. asychis female progenies but shortened the longevity of female and male adults, while the negative effect of backcross on the control efficiency of A. asychis was negligible.

The functions of cuticular hydrocarbons (CHCs) are varied in insects, but one example is to reduce water loss. Previous work has suggested that biosynthesis of CHCs is strongly related to the CYP4G sub-family. Targeting these genes in the brown planthopper, Nilaparvata lugens Stål, might be a new application for integrated pest management. Therefore, we explored the functions of CYP4G76 (GenBank: KM217045.1) and CYP4G115 (GenBank: KM217046.1) genes in this study. The desiccation treatment (RH < 5%) for the duration of 1–3 days significantly increased the transcription level of CYP4G76 and CYP4G115. RNAi through the injection of CYP4G76 and CYP4G115 dsRNA could significantly decrease their expression, respectively, and further reduced the biosynthesis of CHCs, i.e., saturated and straight-chain alkanes. When CYP4G76 and CYP4G115 were suppressed, the susceptibility of N. lugens nymphs to desiccation increased, due to the deficiency of the CHCs in the insect’s cuticle. When the expression of CYP4G76 and CYP4G115 was decreased, this resulted in an increased rate of penetration of the four insecticides: pymetrozine, imidacloprid, thiamethoxam and buprofezin. Therefore, CYP4G76 and CYP4G115 appear to regulate the biosynthesis of CHCs in N. lugens nymphs, which play a major role in protecting insects from water loss and the penetration of insecticides. CYP4G76 and CYP4G115 might be used as a novel target in integrated pest management to N. lugens.

The mitochondrial genome of the Reticulitermes periflaviceps contains 15,925 bp of nucleotide in length including 13 protein-coding genes, 22 transport RNAs, 2 ribosomal RNAs, and a non-coding region. The overall A + T among the genome sequence is 65.64%. The start codons of all protein-coding genes are ATN and the stop codon is TAA except TAG for Nad1 and incomplete T for COII and Nad5. The lengths of 12sRNA and 16sRNA genes are 743 and 1309 bp, respectively, and the control region was 1118 bp in length, with two repeating tandem regions. The phylogenetic tree revealed that R. periflaviceps and Reticulitermes kanmonensis constituted a sister group to Reticulitermes flaviceps. The mitochondrial genome here provides a resource for evolution analysis within termites especially Reticulitermes.

The complete mitochondrial genome of a lower termite, Reticulitermes leptomandibularis is a typical circular DNA molecule of 15,920 bp in length. The genome contains 13 protein-coding genes (PCGs), 22 transfer RNA (tRNA) genes, 2 ribosomal RNA (rRNA) genes, and a non-coding region (D-loop).The overall sequence of R. leptomandibularis is A/T biased with a percentage of 65.36%. The phylogenetic tree constructed using complete mitochondrial genomes of Reticulitermes genus revealed that R. leptomandibularis was closest to Reticulitermes aculabialis and formed a sister group to Reticulitermes speratus. This whole mt genome provides molecular resource for evolution analysis within termites especially the genus Reticulitermes.

The complete circular mitochondrial genome of a higher termite Pericapritermes nitobei has a length of 15,224bp and encodes 37 genes including 13 protein-coding genes (PCGs), 22 transfer RNA (tRNA), 2 ribosomal RNA (rRNA) and a non-coding control region (D-loop). Protein coding genes (PCGs) in this circular mitogenome start with standard ATN initiation codons and end with complete termination codons TAN except for cox2 and nad5 genes with an incomplete stop codon T. The percentage of A and T (67.49%) is higher than that of G and C (32.51%). The phylogenetic tree revealed that mitogenomes of Pericapritermes formed one clade. The tree also revealed that Pericapritermes dolichocephalus and Pericapritermes latignathus constituted a sister group to P. nitobei. The date here provide a resource for genetics and evolution analysis within termites especially Pericapritermes genus.

The complete mitochondrial genome of drywood termite, Incisitermes minor, is reported in this study. The circular mitogenome has a length of 15,970 bp and encodes 37 genes including 13 protein-coding genes (PCGs), 22 transfer RNA (tRNA), two ribosomal RNA (rRNA), and a non-coding control region (D-loop). The percentage of A and T (65.44%) within this mitogenome is much higher than that of G and C (34.56%). The phylogenetic tree revealed that mitogenomes of Kalotermitidae formed one clade. The tree also revealed that I. minor was closest to Cryptotermes secundus, and was a sister group to Neotermes. I. minor is a only species in which mitogenome has been completed so far among the Incisitermes termite. The data provide resource for ecological and evolution analysis within termites especially Kalotermitidae.

We analyzed the usage and consequences of alternative cleavage and polyadenylation (APA) in Drosophila melanogaster by using >1 billion reads of stranded mRNA-seq across a variety of dissected tissues. Beyond demonstrating that a majority of fly transcripts are subject to APA, we observed broad trends for 3′ untranslated region (UTR) shortening in the testis and lengthening in the central nervous system (CNS); the latter included hundreds of unannotated extensions ranging up to 18 kb. Extensive northern analyses validated the accumulation of full-length neural extended transcripts, and in situ hybridization indicated their spatial restriction to the CNS. Genes encoding RNA binding proteins (RBPs) and transcription factors were preferentially subject to 3′ UTR extensions. Motif analysis indicated enrichment of miRNA and RBP sites in the neural extensions, and their termini were enriched in canonical cis elements that promote cleavage and polyadenylation. Altogether, we reveal broad tissue-specific patterns of APA in Drosophila and transcripts with unprecedented 3′ UTR length in the nervous system.

β-Galactosidases can transfer the galactosyl from lactose or galactoside donors to various acceptors and thus are especially useful for the synthesis of important glycosides. However, these enzymes have limitations in the glycosylation of phenolic compounds that have many physiological functions. In this work, the β-galactosidase from Lactobacillus bulgaricus L3 was subjected to site-saturation mutagenesis at the W980 residue. The recombinant pET-21b plasmid carrying the enzyme gene was used as the template for mutation. The mutant plasmids were transformed into Escherichia coli cells for screening. One recombinant mutant, W980F, exhibited increased yield of glycoside when using hydroquinone as the screening acceptor. The enzyme was purified and the effects of the mutation on enzyme properties were determined in detail. It showed improved transglycosylation activity on novel phenolic acceptors besides hydroquinone. The yields of the glycosides produced from phenol, hydroquinone, and catechol were increased by 7.6% to 53.1%. Moreover, it generated 32.3% glycosides from the pyrogallol that could not be glycosylated by the wild-type enzyme. Chemical structures of these glycoside products were further determined by MS and NMR analysis. Thus, a series of novel phenolic galactosides were achieved by β-galactosidase for the first time. This was a breakthrough in the enzymatic galactosylation of the challenging phenolic compounds of great values.

In this study, the synthesis of the core/shell structured diamond/akageneite hybrid particles was performed through one-step isothermal hydrolyzing. The hybrid particle was characterized by X-ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectra. The test results overall reveal that the akageneite coating, phase β-FeO(OH), was uniformly coated onto the diamond surface. The polishing performance of the pristine diamond and hybrid particles for the sapphire substrate was evaluated respectively. The experimental results show that the hybrid particles exhibited improved polishing quality and prolonged effective processing time of polishing pad compared with diamond particles without compromising the material remove rate and surface roughness. The improved polishing behavior might be attributed to the β-FeOOH coating, which is conducive to less abrasive shedding and reducing the scratch depth.