Search

Water potential directly controls the function of leaves, roots, and microbes, and gradients in water potential drive water flows throughout the soil-plant-atmosphere continuum. Notwithstanding its clear relevance for many ecosystem processes, soil water potential is rarely measured in-situ, and plant water potential observations are generally discrete, sparse, and not yet aggregated into accessible databases. These gaps limit our conceptual understanding of biophysical responses to moisture stress and inject large uncertainty into hydrologic and land surface models. Here, we outline the conceptual and predictive gains that could be made with more continuous and discoverable observations of water potential in soils and plants. We discuss improvements to sensor technologies that facilitate in situ characterization of water potential, as well as strategies for building new networks that aggregate water potential data across sites. We end by highlighting novel opportunities for linking more representative site-level observations of water potential to remotely-sensed proxies. Together, these considerations offer a roadmap for clearer links between ecohydrological processes and the water potential gradients that have the 'potential' to substantially reduce conceptual and modeling uncertainties.

Urban regions emit a large fraction of anthropogenic emissions of greenhouse gases (GHG) such as carbon dioxide (CO2) and methane (CH4) that contribute to modern-day climate change. As such, a growing number of urban policymakers and stakeholders are adopting emission reduction targets and implementing policies to reach those targets. Over the past two decades research teams have established urban GHG monitoring networks to determine how much, where, and why a particular city emits GHGs, and to track changes in emissions over time. Coordination among these efforts has been limited, restricting the scope of analyses and insights. Here we present a harmonized data set synthesizing urban GHG observations from cities with monitoring networks across North America that will facilitate cross-city analyses and address scientific questions that are difficult to address in isolation.

The atmospheric boundary layer mediates the exchange of energy, matter, and momentum between the land surface and the free troposphere, integrating a range of physical, chemical, and biological processes and is defined as the lowest layer of the atmosphere (ranging from a few meters to 3 km). In this review, we investigate how continuous, automated observations of the atmospheric boundary layer can enhance the scientific value of co-located eddy covariance measurements of land-atmosphere fluxes of carbon, water, and energy, as are being made at FLUXNET sites worldwide. We highlight four key opportunities to integrate tower-based flux measurements with continuous, long-term atmospheric boundary layer measurements: (1) to interpret surface flux and atmospheric boundary layer exchange dynamics and feedbacks at flux tower sites, (2) to support flux footprint modelling, the interpretation of surface fluxes in heterogeneous and mountainous terrain, and quality control of eddy covariance flux measurements, (3) to support regional-scale modeling and upscaling of surface fluxes to continental scales, and (4) to quantify land-atmosphere coupling and validate its representation in Earth system models. Adding a suite of atmospheric boundary layer measurements to eddy covariance flux tower sites, and supporting the sharing of these data to tower networks, would allow the Earth science community to address new emerging research questions, better interpret ongoing flux tower measurements, and would present novel opportunities for collaborations between FLUXNET scientists and atmospheric and remote sensing scientists.

The following authors were omitted from the original version of this Data Descriptor: Markus Reichstein and Nicolas Vuichard. Both contributed to the code development and N. Vuichard contributed to the processing of the ERA-Interim data downscaling. Furthermore, the contribution of the co-author Frank Tiedemann was re-evaluated relative to the colleague Corinna Rebmann, both working at the same sites, and based on this re-evaluation a substitution in the co-author list is implemented (with Rebmann replacing Tiedemann). Finally, two affiliations were listed incorrectly and are corrected here (entries 190 and 193). The author list and affiliations have been amended to address these omissions in both the HTML and PDF versions.

The FLUXNET2015 dataset provides ecosystem-scale data on CO2, water, and energy exchange between the biosphere and the atmosphere, and other meteorological and biological measurements, from 212 sites around the globe (over 1500 site-years, up to and including year 2014). These sites, independently managed and operated, voluntarily contributed their data to create global datasets. Data were quality controlled and processed using uniform methods, to improve consistency and intercomparability across sites. The dataset is already being used in a number of applications, including ecophysiology studies, remote sensing studies, and development of ecosystem and Earth system models. FLUXNET2015 includes derived-data products, such as gap-filled time series, ecosystem respiration and photosynthetic uptake estimates, estimation of uncertainties, and metadata about the measurements, presented for the first time in this paper. In addition, 206 of these sites are for the first time distributed under a Creative Commons (CC-BY 4.0) license. This paper details this enhanced dataset and the processing methods, now made available as open-source codes, making the dataset more accessible, transparent, and reproducible.

The purpose of this study is to determine whether urban greenhouse gas (GHG) fluxes can be quantified from tower-based mole fraction measurements using Monin–Obukhov similarity theory (MOST). Tower-based GHG mole fraction networks are used in many cities to quantify whole-city GHG emissions. Local-scale, micrometeorological flux estimates would complement whole-city estimates from atmospheric inversions. CO2 mole fraction and eddy-covariance flux data at an urban site in Indianapolis, Indiana, from October 2020 through January 2022 are analyzed. Using MOST flux–variance and flux–gradient relationships, CO2 fluxes were calculated using these mole fraction data and compared to the eddy-covariance fluxes. MOST-based fluxes were calculated using varying measurement heights and methods of estimating stability. The MOST flux–variance relationship method showed good temporal correlation with eddy-covariance fluxes at this site but overestimated flux magnitudes. Fluxes calculated using flux–gradient relationships showed lower temporal correlation with eddy-covariance fluxes but closer magnitudes to eddy-covariance fluxes. Measurement heights closer to ground level produce more precise flux estimates for both MOST-based methods. For flux–gradient methods, flux estimates are more accurate and precise when low-altitude measurements are combined with a large vertical separation between measurement heights. When stability estimates based on eddy-covariance flux measurements are replaced with stability estimates based on the weather station or net radiation data, the MOST-based fluxes still capture the temporal patterns measured via eddy covariance. Based on these results, MOST can be used to estimate the temporal patterns in local GHG fluxes at mole fraction tower sites, complementing the small number of eddy-covariance flux measurements available in urban settings. [ABSTRACT FROM AUTHOR]

A new methodology for establishing the spatial representativeness of tower albedo measurements that are routinely used in validation of satellite retrievals from global land surface albedo and reflectance anisotropy products is presented. This method brings together knowledge of the intrinsic biophysical properties of a measurement site, and the surrounding landscape to produce a number of geostatistical attributes that describe the overall variability, spatial extent, strength of the spatial correlation, and spatial structure of surface albedo patterns at separate seasonal periods throughout the year. Variogram functions extracted from Enhanced Thematic Mapper Plus (ETM+) retrievals of surface albedo using multiple spatial and temporal thresholds were used to assess the degree to which a given point (tower) measurement is able to capture the intrinsic variability of the immediate landscape extending to a satellite pixel. A validation scheme was implemented over a wide range of forested landscapes, looking at both deciduous and coniferous sites, from tropical to boreal ecosystems. The experiment focused on comparisons between tower measurements of surface albedo acquired at local solar noon and matching retrievals from the MODerate Resolution Imaging Spectroradiometer (MODIS) (Collection V005) Bidirectional Reflectance Distribution Function (BRDF)/albedo algorithm. Assessments over a select group of field stations with comparable landscape features and daily retrieval scenarios further demonstrate the ability of this technique to identify measurement sites that contain the intrinsic spatial and seasonal features of surface albedo over sufficiently large enough footprints for use in modeling and remote sensing studies. This approach, therefore, improves our understanding of product uncertainty both in terms of the representativeness of the field data and its relationship to the larger satellite pixel.

Atmospheric CO2 flux inversions require as input an estimate of spatial and temporal correlations of errors in their estimate of the prior mean. Some previous studies have used the differences in CO2 daily average flux estimates produced by terrestrial carbon cycle models and eddy covariance measurements to constrain the flux error correlations. Since inversions are starting to resolve the daily cycle, we set out to examine the correlations at sub‐daily time scales, as well as the correlations across years. To this end, we examine the autocorrelations in the difference between net ecosystem‐atmosphere exchange measurements from 75 AmeriFlux towers and temporally downscaled high‐spatial‐resolution flux estimates from the Carnegie‐Ames‐Stanford Approach (CASA) terrestrial carbon cycle model. We find that the daily cycle is prominent in these hourly autocorrelations and that these autocorrelations persist across years. We propose a family of functions to model these temporal correlations in atmospheric inversions, and use cross validation to determine which of the correlation functions best fits autocorrelation data from towers not in the training set. Correlation functions with a component that attempts to model the daily cycle in the differences match correlations from other towers better than those without. Those models that reproduce the same correlation structures at 1‐year intervals while modulating the amplitudes of the correlations between those intervals improve the fit still further. Plain Language Summary: Atmospheric CO2 flux inversions rely heavily on assumptions about errors in the initial flux estimate. If these errors are related in time or in space, inversions need to represent both the shape and the size of the likely errors. Previous studies have looked at the shape of the errors in daily average fluxes, but fewer have looked at the relationship between errors in one part of a day and in another part of that day, or between 1 year and the next. The study examines relationships in differences between measured and computer‐predicted ecosystem‐atmosphere carbon dioxide fluxes. There are strong relationships between flux errors separated by multiple years. Current attempts to solve for true ecosystem‐atmosphere fluxes using atmospheric data do not take these multi‐year relationships into consideration. Accounting for the multi‐year relationships may improve our ability to determine the true ecosystem‐atmosphere CO2 fluxes. We look for descriptions of these relationships that researchers can use when using atmospheric data to improve the computer‐predicted CO2 fluxes. Key Points: CO2 flux model‐data differences have autocorrelations that recur at intervals of a year with little decay over multiple yearsThese autocorrelations are largely caused by errors in the representation of the daily cycleWe can treat these persistent errors in the daily cycle either as prior flux error correlations or by corrections to the prior flux model [ABSTRACT FROM AUTHOR]

We quantify weekly methane emissions at 0.25 ∘ × 0.3125 ∘ (≈25 × 25 km 2) resolution from the Permian Basin, the largest oil production basin in the US, by inverse analysis of satellite observations from the TROPOspheric Monitoring Instrument (TROPOMI) from May 2018 to October 2020. The mean oil and gas emission from the region (± standard deviation of weekly estimates) was 3.7 ± 0.9 Tg a -1 , higher than previous TROPOMI inversion estimates that may have used biased prior emissions or background assumptions. We find strong week-to-week variability in emissions superimposed on longer-term trends, and these are consistent with independent inferences of temporal emission variability from tower, aircraft, and multispectral satellite data. New well development and natural gas spot price were significant drivers of variability in emissions over our study period but the concurrent 50 % increase in oil and gas production was not. The methane intensity (methane emitted per unit of methane gas produced) averaged 4.6 % ± 1.3 % and steadily decreased from 5 %–6 % in 2018 to 3 %–4 % in 2020. While the decreasing trend suggests improvement in operator practices during the study period, methane emissions from the Permian Basin remained high, with methane intensity an order of magnitude above the industry target of <0.2 %. Our success in using TROPOMI satellite observations for weekly estimates of emissions from a major oil production basin shows promise for application to near-real-time monitoring in support of climate change mitigation efforts. [ABSTRACT FROM AUTHOR]

Modeling of a space-based high-energy 2-μm triple-pulse Integrated Path Differential Absorption (IPDA) lidar was conducted to demonstrate carbon dioxide (CO2) measurement capability and to evaluate random and systematic errors. A high pulse energy laser and an advanced MCT e-APD detector were incorporated in this model. Projected performance shows 0.5 ppm precision and 0.3 ppm bias in low-tropospheric column CO2 mixing ratio measurements from space for 10 second signal averaging over Railroad Valley (RRV) reference surface.

An advanced airborne triple-pulse 2-μm integrated path differential absorption (IPDA) lidar is under development at NASA Langley Research Center that targets both carbon dioxide (CO2) and water vapor (H2O) measurements simultaneously and independently. This lidar is an upgrade to the successfully demonstrated CO2 2-μm double-pulse IPDA. Upgrades include high-energy, highrepetition rate 2-μm triple-pulse laser transmitter, innovative wavelength control and advanced HgCdTe (MCT) electron-initiated avalanche photodiode detection system. Ground testing and airborne validation plans are presented.

This work describes advances in critical lidar technologies and techniques developed as part of the NASA Active Sensing of CO2 Emissions over Nights, Days, and Seasons CarbonHawk Experiment Simulator system for measuring atmospheric column carbon dioxide (CO2) mixing ratios. This work provides an overview of these technologies and results from recent test flights during the NASA Atmospheric Carbon and Transport – America (ACT-America) Earth Venture Suborbital summer 2016 flight campaign.