Search

Planar metasurface lens structures based on microstrip technology, optimized to control the propagation of surface waves (SWs), are presented. Two different lenses are studied, i.e., a converging or plane-wave-like lens and a diverging lens. Near-field simulations and measurements are reported to demonstrate the guiding features of the designed lenses, which have also been proposed as a feeding system for planar leaky-wave antennas (LWAs). Far-field results show improvements in terms of reduced cross polarization and sidelobe level as well as increased realized gain when compared without these SW lenses. The proposed structures are also simple to manufacture and are employed herein to control SW fields generated by a TM0 surface-wave launcher (SWL) integrated in the ground plane of the developed prototype demonstrators. Some applications include high-gain radar and remote sensing satellite antennas as well as microwave and millimeter-wave communication systems.

Two-dimensional leaky-wave antennas (LWAs) are a class of planar, traveling-wave radiators with attractive features of a low profile, ease of feeding, frequency reconfigurability of the radiation pattern, and polarization agility. Their use in conjunction with array feeders has been the subject of various investigations in recent decades, thanks to the additional degrees of freedom provided by the presence of multiple independent sources. Here, we provide a review of some of the most recent and promising array-fed two-dimensional (2-D) LWAs, selecting a couple of the most significant structures in application, namely Fabry–Perot cavity antennas and bull’s-eye antennas, and discussing some of their recently proposed advanced features.

We present the design of a novel K-band radar architecture for short-range target detection. Applications include direction finding systems and automotive radar. The developed system is compact and low cost and employs substrate-integrated-waveguide (SIW) antenna arrays and a $4\times 4$ Butler matrix (BM) beamformer. In particular, the proposed radar transmits a frequency modulated continuous-wave (FMCW) signal at 24 GHz, scanning the horizontal plane by switching the four input ports of the BM in time. Also, in conjunction with a new processing method for the received radar signals, the architecture is able to provide enhanced resolution at reduced computational burden and when compared to more standard single-input multiple-output (SIMO) and multiple-input multiple-output (MIMO) systems. The radar performance has also been measured in an anechoic chamber and results have been analyzed by illuminating and identifying test targets which are 2° apart, while also making comparisons to SIMO and MIMO FMCW radars. Moreover, the proposed radar architecture, by appropriate design, can also be scaled to operate at other microwave and millimeter-wave frequencies, while also providing a computationally efficient multi-channel radar signal processing platform.

An isolation technique, which does not require conventional circulators, is proposed for the realization of a simple and low-cost aperture-coupled circularly polarized antenna for application to full-duplex devices. The approach is based on the use of slotlines loops to provide surface current cancellation in specific regions of the antenna structure, leading to improved axial ratio and isolation between the ports in excess of 50 dB. Circular polarization is achieved by introducing a double-box hybrid coupler, which is optimized to obtain good matching and isolation of the quadrature signals. On this basis, both right- and left-hand circularly polarized beams are achieved by interchanging the transmitting and receiving antenna ports, enabling full-duplex operation and reconfigurability. While the antenna structure is designed for 2.45 GHz operation, one can take advantage of the proposed approach to tune the frequency of maximum isolation. Both single-element prototypes as well as a 2 x 2 array are fabricated and measured, showing good agreement with the simulations and validating the proposed isolation approach. The beam steering capabilities as well as the application to a Van Atta retrodirective antenna array and the possibilities of achieving delta and sum patterns for monopulse operation are also reported. The proposed full-duplex antenna can also represent an excellent solution for narrowband wireless power transmission systems.

A planar antenna radiating twisted beams with different azimuthal order and a consistent beam angle is designed by employing a single uniform circular array embedded in a Fabry-Perot cavity. Circular phased arrays placed in free space are commonly employed to radiate conical beams carrying orbital angular momentum. However, the beam angle depends on both the array radius and the azimuthal order of the beam, thus requiring the use of multiple concentric circular arrays in order to produce beams with different azimuthal order and a common beam angle. In the proposed design, this is simply achieved by exciting higher-order cylindrical leaky waves through a single circular array feeding a Fabry-Perot cavity. Such waves radiate conical patterns whose beam angle is mainly determined by the relevant radial wavenumber and only weakly depends on the azimuthal order. In particular, we propose here an antenna design capable of radiating beams with azimuthal orders 0, ±1, ±2, and ±3 in the microwave range. The cavity is fed by an array of coaxial probes optimized for input matching through the inclusion of parasitic metal pins. Numerical full-wave simulations validate the effectiveness of the proposed design in terms of radiation patterns, passive input scattering parameters, and active input reflection coefficients.

A significant quantity of space-borne Global Navigation Satellite Systems-Reflectometry (GNSS-R) data over land was made available in the last decade, leading to an increasing interest in the assessment of the potentialities of this new remote sensing technique for land monitoring. In this frame, an electromagnetic simulator, such as the Soil And VEgetation Reflection Simulator (SAVERS), has the key role to support the understanding of the physical mechanism involved in the bistatic scattering and to identify the surface features mainly contributing to the observed signal. Originally developed for ground and airborne GNSS-R observations over homogeneous areas, in this study, SAVERS was upgraded to account for space-borne systems. The new version of SAVERS takes into account the inhomogeneity characterizing the large area observed from space altitudes, due to a variable surface elevation and land cover. Coherent and incoherent scattering and polarization rotation are computed taking into account the local slope and elevation of the surface. The simulator was validated against TechDemoSat-1 observations over a bare surface with a complex topography and over a forested surface with a gentle topography. The validation results show the capability of SAVERS to correctly estimate the effect of the topography, enhancing the understanding of the observations. Moreover, it was found that the sensitivity to soil moisture is independent of the topography (about 1.5 dB for a 10% variation of soil moisture). Whereas a saturation of the GNSS-R reflectivity over a variable topography is reached for lower values of biomass, earlier than in the flat case.

The article of the freeze/thaw dynamic of high-latitude Earth surfaces is extremely important and informative for monitoring the carbon cycle, the climate change, and the security of infrastructures. Current methodologies mainly rely on the use of active and passive microwave sensors, while very few efforts have been devoted to the assessment of the potential of observations based on signals of opportunity. This article aims at assessing the performance of spaceborne Global Navigation Satellite System Reflectometry (GNSS-R) for high-spatial and high-temporal resolution monitoring of the Earth-surface freeze/thaw state. To this aim, reflectivity values derived from the TechDemoSat-1 (TDS-1) data have been collected and elaborated, and thus compared against the soil moisture active passive (SMAP) freeze/thaw information. Shallow subsurface soil temperature values recorded by a network of in situ stations have been considered as well. Even if an extensive and timeliness cross availability of both types of experimental data is limited by the spatial coverage and density of TDS-1 observations, the proposed analysis clearly indicates a significant seasonal cycle in the calibrated reflectivity. This opens new perspectives for the bistatic L-band high-resolution satellite monitoring of the freeze/thaw state, as well as to support the development of next-generation of GNSS-R satellite missions designed to provide enhanced performance and improved temporal and spatial coverage over high latitude areas.

In this study, the capability of Global Navigation Satellite System Reflectometry in evaluating forest biomass from space has been investigated by using data coming from the TechDemoSat-1 (TDS-1) mission of Surrey Satellite Technology Ltd. and from the Cyclone Satellite System (CyGNSS) mission of NASA. The analysis has been first conducted using TDS-1 data on a local scale, by selecting five test areas located in different parts of the Earth's surface. The areas were chosen as examples of various forest coverages, including equatorial and boreal forests. Then, the analysis has been extended by using CyGNSS to a global scale, including any type of forest coverage. The peak of the Delay Doppler Map calibrated to retrieve an “equivalent” reflectivity has been exploited for this investigation and its sensitivity to forest parameters has been evaluated by a direct comparison with vegetation optical depth (VOD) derived from the Soil Moisture Active Passive L-band radiometer, with a pantropical aboveground biomass (AGB) map and then with a tree height (H) global map derived from the Geoscience Laser Altimeter System installed on-board the ICEsat satellite. The sensitivity analysis confirmed the decreasing trend of the observed equivalent reflectivity for increasing biomass, with correlation coefficients 0.31 ≤ R ≤ 0.54 depending on the target parameter (VOD, AGB, or H) and on the considered dataset (local or global). These correlations were not sufficient to retrieve the target parameters by simple inversion of the direct relationships. The retrieval has been therefore based on Artificial Neural Networks making it possible to add other inputs (e.g., the incidence angle, the signal to noise ratio, and the lat/lon information in case of global maps) to the algorithm. Although not directly correlated to the biomass, these inputs helped in improving the retrieval accuracy. The algorithm was tested on both the selected areas and globally, showing a promising ability to retrieve the target parameter, either AGB or H, with correlation coefficients R ≃ 0.8.

A planar and low-cost parallel-plate waveguide (PPW) launcher based on substrate integrated waveguide (SIW) technology is proposed. It can launch the fundamental TEM mode with a collimated wave front into a PPW structure while also being low profile and easy to fabricate. The launcher is implemented using a network of SIW transmission lines and its design is based on the leaky-wave (LW) theory. In our proposed structure, a selection of the SIW lines is made to leak power into the desired PPW region by means of a partially reflective surface, enabling planar wave front propagation of the TEM mode where efficiency values of over 90% are achieved. Measurements of a fabricated prototype are also reported at 15 GHz to demonstrate the design procedure and validate structure operation. When compared with similar co-axial and metallic waveguide launchers, our proposed SIW structure represents a compact, integrated, and unique design solution which may be useful to feed planar parallel-plate slot arrays and end-fire antennas. In addition, our novel and simple approach for PPW excitation can also be applied to other parallel-plate-based guides, low-cost transitions, and compact dividing/combining circuits for a new antenna and non-radiating LW feed systems at microwave and millimeter-wave frequencies.

The design of a K-band radial leaky-wave antenna is presented for polarization diversity applications. The antenna structure is constituted by an annular, radially periodic, and metallic strip grating printed on top of a single-layer grounded dielectric slab. The integrated feeding system is defined by a 2 × 2 array of planar slot sources for cylindrical surface-wave excitation. By the addition of the grating, the surface wave is perturbed and enables cylindrical leaky-wave radiation by means of a fast n = -1 space harmonic, whose behavior is characterized through a full-wave dispersive analysis. By proper phasing and spacing of the four independent TM feeds, positioned close to the center of the annular grating and on the ground plane, we demonstrate the possibility of radiating directive broadside beams offering linear, left or right-handed circularly polarized radiation, and sum and delta patterns. Thus, we propose an original solution to flexibly control the polarization of a high-gain beam by means of a simple and low-cost feeding system, made by the minimum number of integrated array sources. To accurately assess the antenna features and performance, the role of a zeroth and first-order cylindrical leaky waves propagating along the antenna aperture is also discussed. The proposed antenna design may be of interest for direction-of-arrival estimation by means of monopulse radars, as well as for a wide class of applications where flexible control of the polarization is desired, such as satellite and terrestrial point-to-point communication systems and earth observation.

This paper presents the design of a circularly polarized (CP) meshed patch antenna fully integrated within a solar panel for operation on CubeSats and other microsatellites. The structure has been designed to ensure optimal antenna performance at S-band as well as to minimize any shadowing effects that can reduce the received power at the solar cells. To generate CP, the antenna is driven by two orthogonal feed points, penetrating through a transparent borosilicate glass layer, as well as a silicon and PCB substrate. Simulated and measured performances, on both a preliminary FR4 design and a fully integrated prototype, demonstrate a good impedance bandwidth, satisfactorily axial ratio, as well as stable radiation patterns and minimum shadowing levels. The proposed antenna can be useful for communications between satellites as well as with the ground station, and since the structure is compact and completely integrated, the design can be an alternative approach to new-phased arrays on solar panels and other beam-steering systems.

We present an enhanced imaging procedure for suppression of the rough surface clutter arising in forward-looking ground-penetrating radar (FL-GPR) applications. The procedure is based on a matched filtering formulation of microwave tomographic imaging, and employs coherence factor (CF) for clutter suppression. After tomographic reconstruction, the CF is first applied to generate a “coherence map” of the region in front of the FL-GPR system illuminated by the transmitting antennas. A pixel-by-pixel multiplication of the tomographic image with the coherence map is then performed to generate the clutter-suppressed image. The effectiveness of the CF approach is demonstrated both qualitatively and quantitatively using electromagnetic modeled data of metallic and plastic shallow-buried targets.

A generalized electromagnetic model is presented in order to predict the response of forward scatter radar (FSR) systems for air-target surveillance applications in both far-field and near-field conditions. The relevant scattering problem is tackled by developing the Helmholtz–Kirchhoff formula and Babinet’s principle to express the scattered and the total fields in typical FSR configurations. To fix the distinctive features of this class of problems, our approach is applied here to metallic targets with canonical rectangular shapes illuminated by a plane wave, but the model can straightforwardly be used to account for more general scenarios. By exploiting suitable approximations, a simple analytical formulation is derived allowing us to efficiently describe the characteristics of the FSR response for a target transitioning with respect to the receiver from far-field to near-field regions. The effects of different target electrical sizes and detection distances on the received signal, as well as the impact of the trajectory of the moving object, are evaluated and discussed. All of the results are shown in terms of quantities normalized to the wavelength and can be generalized to different configurations once the carrier frequency of the FSR system is set. The range of validity of the proposed closed-form approach has been checked by means of numerical analyses, involving comparisons also with a customized implementation of a full-wave commercial CAD tool. The outcomes of this study can pave the way for significant extensions on the applicability of the FSR technique.

Effective diagnostics with ground penetrating radar (GPR) is strongly dependent on the amount and quality of available data as well as on the efficiency of the adopted imaging procedure. In this frame, the aim of the present work is to investigate the capability of a typical GPR system placed at a ground interface to derive three-dimensional (3D) information on the features of buried dielectric targets (location, dimension, and shape). The scatterers can have size comparable to the resolution limits and can be placed in the shallow subsurface in the antenna near field. Referring to canonical multimonostatic configurations, the forward scattering problem is analyzed first, obtaining a variety of synthetic GPR traces and radargrams by means of a customized implementation of an electromagnetic CAD tool. By employing these numerical data, a full 3D frequency-domain microwave tomographic approach, specifically designed for the inversion problem at hand, is applied to tackle the imaging process. The method is tested here by considering various scatterers, with different shapes and dielectric contrasts. The selected tomographic results illustrate the aptitude of the proposed approach to recover the fundamental features of the targets even with critical GPR settings.