Search

We demonstrate a novel application of green nanosilicas (GN), prepared via an environmentally friendly route, in removing volatile organic compounds (VOCs). Herein, we aim to establish GN as viable alternatives to traditional mesoporous silicas for the removal of monoaromatic hydrocarbons (MAHC). The results show that the GN have high extraction efficiencies comparable to those previously reported for mesoporous silicas. It was demonstrated that bespoke GN can be syntheised readily with the ability to tailor their physical properties and MAHC adsorption. In order to understand the MAHC adsorption by GN, their porosity, morphology and pore structure were characterised. It was observed that the combination of broad pore size distribution and, in particular, the presence of meso- and micro-porosity in GN contributed to high MAHC extraction efficiencies and selectivity. Although from a commercial viewpoint, further optimisation of GN is desirable in order to replace traditional sorbents, this work clearly highlights a new family of “green” sorbents, which can be prepared with a substantial reduction in secondary pollution with potential applications in selective gas separation. Graphical Abstract

There is an increasing demand for environmentally sustainable sourcing of ingredients for the food, pharmaceutical and supplements industries. In the case of calcium carbonate (E170) as by-products from the egg and shellfish processing industries these have the potential to be sustainably sourced. In addition to their green credentials, biogenic carbonates have intrinsic benefits in terms of their chemical composition, such as a low heavy metal burden. However, their biogenic origin can potentially lead to manufacturing issues such as higher levels of co-mineralising components and the organic templates of their natural production. This contribution identifies the regulatory barriers to the adoption of biogenic eggshell calcium carbonate by assessing materials from biological sources along with commercial precipitated and ground carbonates against current regulatory standards. Keywords: Calcium carbonate, Biological products, Heavy Metals, Dietary supplements, Pharmaceutical preparations

1. The essentiality of silicon for skeletal development has been established, but the adequacy of bioavailable silicon supply in broiler diets has not been considered for 30 years, despite average daily weight gain of birds increasing by almost a third over that time. Therefore, two studies were undertaken to investigate whether modern strains of broiler chicken benefit from diet supplementation with bioavailable silica. 2. Trial 1 was a 2x2x2 factorial study where six replicate pens of seven chicks were fed one of the eight freshly prepared diets from hatch to 21 days of age, with bodyweight gain and feed intake recorded weekly. Diets combined the following factors: silicon supplement fed at 0 ppm or 1000 ppm, phytase levels of either 0 FTU/kg or 1500 FTU/kg and either 0.6% or 0.7% Ca. Tibia were analysed for bone breaking strength, extent of tibial dyschondroplasia and feet measured for bone ash and pododermatitis score. 3. Trial 2 used a 0.7% Ca with 1500 FTU phytase diet as the control and compared this with the same diet containing either 1000 ppm silicon (MONO-Si) freshly added each week or 1000 ppm silicon added in a single, advance-prepared batch per feeding phase. Each diet was fed to nine pens of seven birds from 0 to 35 d with feed consumption and weight recorded weekly. Two birds per pen were euthanised on d 14, 21 and 35 and tibias collected for measurement of bone breaking strength, ash and mineral content. Serum was collected for Si content. 4. Univariate analysis of means from each trial showed that silica supplementation improved bird weight gain over the starter phase, though there was no effect on feed conversion. 5. Bone strength improved with added silica in both studies, without affecting bone mineral content; indicating that modern strains of broiler may require dietary supplementation with bioavailable silicon.

Structural properties of bioinorganic composites are of current interest in the areas of drug delivery, bone repair and biomimetics. In such composite systems, structural analysis is enhanced when we combine methods of spectroscopy and simulation. Depending on size and shape, structural discontinuities of inorganic matter may modulate the optical response of a bound molecule. Using Density Functional Theory we explore the effects of a local field next to the surface of a silica cluster on frequencies of methyl stretching modes of associated methanols. Computation results predict that the electrostatic potential modulated by structural discontinuities of silica should not contribute to any systematic frequency shifts for normal modes of a guest molecule. Regardless of position, the methyl stretching modes of methanol demonstrate sensitivity only to the local chemistry of bonding with silanols, which may lead either to a low or to high frequency shift for vibrations. In support, experimental studies of deuterated methanol at impurity levels in water show uniform broadening of resonances of Carbon–Deuterium stretching modes in the presence of both crystalline and amorphous silica nanoparticles. The significance of these findings is that the spectral responses of guest molecules on such surfaces should not be subject to bias introduced by edge effects.

Calcium carbonate, (E170) is a common food and pharmaceutical additive/ingredient. In addition to a source of calcium, the carbonate has uses including as a colour, acidity regulator and bulking agent. Globally, a range of regulatory agencies and pharmacopoeia control the analyses and specification of additives in food, supplements, pharmaceutical substances and excipients. Accordingly, a range of specifications and analyses exist for calcium carbonate depending on the application and market of the product. In this contribution, we analyse calcium carbonates from geological, synthetic and biogenic sources, focussing on acid insoluble impurities, a test required by current monographs. Analysis of calcium carbonate from different origins may require modification of existing tests to comply with regulatory bodies, due to the variation of impurities specific to the source of the material. We suggest an analytical approach involving centrifugation that improves analytical efficiency (up to 85% time reduction), especially for calcium carbonate of biological origin.

In this study, we assessed uptake and potential efficacy of a novel, pH neutral form of silicon supplement in vitro and using broiler chickens as a model species. In vitro bioavailability of this supplement was significantly higher than other commercial supplements tested, all of which claim available silica content. To confirm bioavailability of the new supplement in vivo, a broiler chick feeding trial reported blood uptake that was significantly higher than a Bamboo-derived silicon supplement. We assessed dose response of the novel supplement in a further study with increased dose related levels of silicon being detected in the blood and tibia. We found tibia and foot ash residue as a percentage of dry mass was higher with inclusion of the novel supplement in the diet, particularly in young birds and that this was followed by significant increase in tibia breaking strength. This novel supplement may therefore have applications in the improvement of bone integrity, with implications for the reduction of lameness in broilers. These results indicate the novel silica supplement is readily absorbed in chicks, and transported in the blood supply to sites such as the skeleton due to it being present in a non-condensed, monomeric form. There is potential for wider application of this silica supplement in other species where bone breakages are a problem, including high performance sport.

The physical and mechanical properties of structural proteins such as silk fibroin can be modified by controlled conformational change, which is regularly monitored by Fourier transform infrared spectroscopy by peak fitting of the amide I band envelope. Although many variables affecting peak shape are well established, there is no fixed methodology to compare and follow secondary structural differences without significant operator input especially where low frequency spectral noise is a problem. The aim of this contribution is to establish a method for such analyses to be carried at high levels of autonomy to prevent subjective or erroneous fitting. A range of approaches was trialled with optimal peak parameters selected based on overall goodness of fit and reproducibility of fit of replicate sample spectra. The method was successfully tested against reference proteins having contrasting β content and the rationale for parameter selection is presented. Further, we applied this method to measure the effect of conformational change on the energy of the amide I band of silk fibroin during annealing. Energy changes were ca. 400 kJ mol−1 of fibroin. To confirm that this energy change was a consequence of increased hydrogen bonding we used a Thioflavin T staining method typically used to identify β aggregate type structures in amyloid plaques. We propose that the approach described herein can aid in the development of silk based materials for biomedical applications where tuning of the physical and mechanical properties of the silk are needed to guarantee optimum activity. Statement of Significance The physical and mechanical properties of proteins including silk fibroin can be modified by controlled structural change, which is regularly monitored by Fourier transform infrared spectroscopy (FTIR) by peak fitting of the amide I band. Currently there is no fixed methodology to compare and follow secondary structural differences without significant operator input leading to subjectivity and error. This contribution establishes a method for such analyses to be carried at high levels of autonomy applicable to a wide range of proteins and the conformational changes have been quantified as a single energy change output, which clearly shows the progression of the annealing process used. We propose that the approach can help in the development of silk based materials for biomedical applications where tuning of the physical and mechanical properties of the silk are needed to guarantee optimum activity.

In the present study, an artificial spider silk gene, 6mer, derived from the consensus sequence of Nephila clavipes dragline silk gene, was fused with different silica-binding peptides (SiBPs), A1, A3 and R5, to study the impact of the fusion protein sequence chemistry on silica formation and the ability to generate a silk–silica composite in two different bioinspired silicification systems: solution–solution and solution– solid. Condensed silica nanoscale particles (600–800 nm) were formed in the presence of the recombinant silk and chimeras, which were smaller than those formed by 15mer-SiBP chimeras [1], revealing that the molecular weight of the silk domain correlated to the sizes of the condensed silica particles in the solution system. In addition, the chimeras (6mer-A1/A3/R5) produced smaller condensed silica particles than the control (6mer), revealing that the silica particle size formed in the solution system is controlled by the size of protein assemblies in solution. In the solution–solid interface system, silicification reactions were performed on the surface of films fabricated from the recombinant silk proteins and chimeras and then treated to induce β-sheet formation. A higher density of condensed silica formed on the films containing the lowest β-sheet content while the films with the highest β-sheet content precipitated the lowest density of silica, revealing an inverse correlation between the β-sheet secondary structure and the silica content formed on the films. Intriguingly, the 6mer-A3 showed the highest rate of silica condensation but the lowest density of silica deposition on the films, compared with 6mer-A1 and -R5, revealing antagonistic crosstalk between the silk and the SiBP domains in terms of protein assembly. These findings offer a path forward in the tailoring of biopolymer–silica composites for biomaterial related needs.

We present a non-destructive analytical calibration tool to allow quantitative assessment of individual calcium phosphates such as hydroxyapatite (HAP) from mixtures including brushite. Many experimental approaches are used to evaluate the mineralising capabilities of biomolecules including peptides. However, it is difficult to quantitatively compare the efficacy of peptides in the promotion of mineralisation when inseparable mixtures of different minerals are produced. To address this challenge, a series of hydroxyapatite and brushite mixtures were produced as a percent/weight (0–100%) from pure components and multiple (N = 10) XRD patterns were collected for each mixture. A linear relationship between the ratio of selected peak heights and the molar ratio was found. Using this method, the mineralising capabilities of three known hydroxyapatite binding peptides, CaP(S) STLPIPHEFSRE, CaP(V) VTKHLNQISQSY and CaP(H) SVSVGMKPSPRP, was compared. All three directed mineralisation towards hydroxyapatite in a peptide concentration dependent manner. CaP(V) was most effective at inducing hydroxyapatite formation at higher reagent levels (Ca2+ = 200 mM), as also seen with peptide-silk chimeric materials, whereas CaP(S) was most effective when lower concentrations of calcium (20 mM) and phosphate were used. The approach can be extended to investigate HAP mineralisation in the presence of any number of mineralisation promoters or inhibitors.

International audience; Novel protein chimeras constituted of "silk" and a silica-binding peptide (KSLSRHDHIHHH) were synthesized by genetic or chemical approaches and their influence on silica-silk based chimera composite formation evaluated. Genetic chimeras were constructed from 6 or 15 repeats of the 32 amino acid consensus sequence of Nephila clavipes spider silk ([SGRGGLGGQG AGAAAAAGGA GQGGYGGLGSQG](n)) to which one silica binding peptide was fused at the N terminus. For the chemical chimera, 28 equiv of the silica binding peptide were chemically coupled to natural Bombyx mori silk after modification of tyrosine groups by diazonium coupling and EDC/NHS activation of all acid groups. After silica formation under mild, biomaterial-compatible conditions, the effect of peptide addition on the properties of the silk and chimeric silk-silica composite materials was explored. The composite biomaterial properties could be related to the extent of silica condensation and to the higher number of silica binding sites in the chemical chimera as compared with the genetically derived variants. In all cases, the structure of the protein/chimera in solution dictated the type of composite structure that formed with the silica deposition process having little effect on the secondary structural composition of the silk-based materials. Similarly to our study of genetic silk based chimeras containing the R5 peptide (SSKKSGSYSGSKGSKRRIL), the role of the chimeras (genetic and chemical) used in the present study resided more in aggregation and scaffolding than in the catalysis of condensation. The variables of peptide identity, silk construct (number of consensus repeats or silk source), and approach to synthesis (genetic or chemical) can be used to "tune" the properties of the composite materials formed and is a general approach that can be used to prepare a range of materials for biomedical and sensor-based applications.

Protein polymers provide a unique opportunity for tunable designs of material systems due to the genetic basis of sequence control. To address the challenge of biomineralization interfaces with protein based materials, we genetically engineered spider silks to design organic-inorganic hybrid systems. The spider silk inspired domain (SGRGGLGGQG AGAAAAAGGA GQGGYGGLGSQGT) 15 served as an organic scaffold to control material stability and to allow multiple modes of processing, whereas the hydroxyapatite binding domain VTKHLNQISQSY (VTK), provided control over osteogenesis. The VTK domain was fused either to the N-, C- or both terminals of the spider silk domain to understand the effect of position on material properties and mineralization. The addition of the VTK domain to silk did not affect the physical properties of the silk recombinant constructs, but it had a critical role in the induction of biomineralization. When the VTK domain was placed on both the C- and N-termini the formation of crystalline hydroxyapatite was significantly increased. In addition, all of the recombinant proteins in film format supported the growth and proliferation of human mesenchymal stem cells (hMSCs). Importantly, the presence of the VTK domain enhanced osteoinductive properties up to 3-fold compared to the control (silk alone without VTK). Therefore, silk-VTK fusion proteins have been shown suitable for mineralization and functionalization for specific biomedical applications. Statement of Significance Organic-inorganic interfaces are integral to biomaterial functions in many areas of repair and regeneration. Several protein polymers have been investigated for this purpose. Despite their success the limited options to fine-tune their material properties, degradation patterns and functionalize them for each specific biomedical application limits their application. Various studies have shown that the biological performance of such proteins can be improved by genetic engineering. The present study provides data relating protein design parameters and functional outcome quantified by biomineralization and human mesenchymal stem cell differentiation. As such, it helps the design of osteoinductive recombinant biomaterials for bone regeneration.

Biomaterial design via genetic engineering can be utilized for the rational functionalization of proteins to promote biomaterial integration and tissue regeneration. Spider silk has been extensively studied for its biocompatibility, biodegradability and extraordinary material properties. As a protein-based biomaterial, recombinant DNA derived derivatives of spider silks have been modified with biomineralization domains which lead to silica deposition and potentially accelerated bone regeneration. However, the influence of the location of the R5 (SSKKSGSYSGSKGSKRRIL) silicifying domain fused with the spider silk protein sequence on the biosilicification process remains to be determined. Here we designed two silk-R5 fusion proteins that differed in the location of the R5 peptide, C- vs. N-terminus, where the spider silk domain consisted of a 15mer repeat of a 33 amino acid consensus sequence of the major ampullate dragline Spidroin 1 from Nephila clavipes (SGRGGLGGQG AGAAAAAGGA GQGGYGGLGSQGT). The chemical, physical and silica deposition properties of these recombinant proteins were assessed and compared to a silk 15mer control without the R5 present. The location of the R5 peptide did not have a significant effect on wettability and surface energies, while the C-terminal location of the R5 promoted more controlled silica precipitation, suggesting differences in protein folding and possibly different access to charged amino acids that drive the silicification process. Further, cell compatibility in vitro, as well as the ability to promote human bone marrow derived mesenchymal stem cell (hMSC) differentiation were demonstrated for both variants of the fusion proteins.

Biomineral formation is widespread in nature, and occurs in bacteria, single-celled protists, plants, invertebrates, and vertebrates. Minerals formed in the biological environment often show unusual physical properties (e.g. strength, degree of hydration) and often have structures that exhibit order on many length scales. Biosilica, found in single-celled organisms through to higher plants and primitive animals (sponges), is formed from an environment that is undersaturated with respect to silicon, and under conditions of approximately neutral pH and relatively low temperatures of 4-40 °C compared to those used industrially. Formation of the mineral may occur intracellularly or extracellularly, and specific biochemical locations for mineral deposition that include lipids, proteins and carbohydrates are known. In most cases, the formation of the mineral phase is linked to cellular processes, an understanding of which could lead to the design of new materials for biomedical, optical and other applications. In this contribution, we describe the aqueous chemistry of silica, from uncondensed monomers through to colloidal particles and 3D structures, that is relevant to the environment from which the biomineral forms. We then describe the chemistry of silica formation from alkoxides such as tetraethoxysilane, as this and other silanes have been used to study the chemistry of silica formation using silicatein, and such precursors are often used in the preparation of silicas for technological applications. The focus of this article is on the methods, experimental and computational, by which the process of silica formation can be studied, with an emphasis on speciation.

The discovery and evaluation of potent and long-acting oral sulfonamidopyrrolidin-2-one factor Xa inhibitors with tetrahydroisoquinoline and benzazepine P4 motifs are described. Unexpected selectivity issues versus tissue plasminogen activator in the former series were addressed in the later, delivering a robust candidate for progression towards clinical studies.

Considerable research has been directed toward identifying the mechanisms involved in biosilicification to understand and possibly mimic the process for the production of superior silica-based materials while simultaneously minimizing pollution and energy costs. Molecules isolated from diatoms and, most recently sponges, thought to be key to this process contain polyamines with a propylamine backbone and variable levels of methylation. In a chemical approach to understanding the role of amine (especially propylamine) structures in silicification we have explored three key structural features: ( i ) the degree of polymerization, ( ii ) the level of amine methylation, and ( iii ) the size of the amine chain spacers. In this article, we show that there are two factors critical to their function: the ability of the amines to produce microemulsions and the presence of charged and uncharged amine groups within a molecule, with the latter feature helping to catalyze silicic acid condensation by a proton donor/acceptor mechanism. The understanding of amine–silicate interactions obtained from this study has enabled the controlled preparation of hollow and nonporous siliceous materials under mild conditions (circumneutral pH, room temperature, and in all aqueous systems) possibly compatible with the conditions used by biosystems. The “rules” identified from our study were further used predictively to modulate the activity of a given amine. We believe that the outcomes of the present contribution will form the basis for an approach to controlling the growth of inorganic materials by using tailor-made organic molecules.

Bombyx mori (BM) silk fibroin is composed of two different subunits; heavy chain and light chain fibroin linked by a covalent disulphide bond. Current methods of separating the two silk fractions is complicated and produces inadequate quantities of the isolated components for the study of the individual light and heavy chain silks with respect to new materials. We report a simple method of separating silk fractions using formic acid. The formic acid treatment partially releases predominately the light chain fragment (soluble fraction) and then the soluble fraction and insoluble fractions can be converted into new materials. The regenerated original (total) silk fibroin and the separated fractions (soluble vs. insoluble) had different molecular weights and showed distinctive pH stabilities against aggregation/precipitation based on particle charging. All silk fractions could be electrospun to give fibre mats with viscosity of the regenerated fractions being the controlling factor for successful electrospinning. The silk fractions could be mixed to give blends with different proportions of the two fractions to modify the diameter and uniformity of the electrospun fibres formed. The soluble fraction containing the light chain was able to modify the viscosity by thinning the insoluble fraction containing heavy chain fragments, perhaps analogous to its role in natural fibre formation where the light chain provides increased mobility and the heavy chain producing shear thickening effects. The simplicity of this new separation method should enable access to these different silk protein fractions and accelerate the identification of methods, modifications and potential applications of these materials in biomedical and industrial applications.

Silica skeletal architectures in diatoms are characterized by remarkable morphological and nanostructural details. Silk proteins from spiders and silkworms form strong and intricate self-assembling fibrous biomaterials in nature. We combined the features of silk with biosilica through the design, synthesis, and characterization of a novel family of chimeric proteins for subsequent use in model materials forming reactions. The domains from the major ampullate spidroin 1 (MaSp1) protein of Nephila clavipes spider dragline silk provide control over structural and morphological details because it can be self-assembled through diverse processing methods including film casting and fiber electrospinning. Biosilica nanostructures in diatoms are formed in aqueous ambient conditions at neutral pH and low temperatures. The R5 peptide derived from the silaffin protein of Cylindrotheca fusiformis induces and regulates silica precipitation in the chimeric protein designs under similar ambient conditions. Whereas mineralization reactions performed in the presence of R5 peptide alone form silica particles with a size distribution of 0.5–10 μm in diameter, reactions performed in the presence of the new fusion proteins generate nanocomposite materials containing silica particles with a narrower size distribution of 0.5–2 μm in diameter. Furthermore, we demonstrate that composite morphology and structure could be regulated by controlling processing conditions to produce films and fibers. These results suggest that the chimeric protein provides new options for processing and control over silica particle sizes, important benefits for biomedical and specialty materials, particularly in light of the all aqueous processing and the nanocomposite features of these new materials.

Correction for ‘Influence of silk–silica fusion protein design on silica condensation in vitro and cellular calcification’ by Robyn Plowright et al., RSC Adv., 2016, 6, 21776–21788.

The work presented here shows for the first time that it is possible to silicify S-layer coated liposomes and to obtain stable functionalized hollow nano-containers. For this purpose, the S-layer protein of Geobacillus stearothermophilus PV72/p2 was recombinantly expressed and used for coating positively charged liposomes composed of dipalmitoylphosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4. Subsequently, plain (uncoated) liposomes and S-layer coated liposomes were silicified. Determination of the charge of the constructs during silicification allowed the deposition process to be followed. After the particles had been silicified, lipids were dissolved by treatment with Triton X-100 with the release of previously entrapped fluorescent dyes being determined by fluorimetry. Both, ζ-potential and release experiments showed differences between silicified plain liposomes and silicified S-layer coated liposomes. The results of the individual preparation steps were examined by embedding the respective assemblies in resin, ultrathin sectioning and inspection by bright-field transmission electron microscopy (TEM). Energy filtered TEM confirmed the successful construction of S-layer based silica cages. It is anticipated that this approach will provide a key to enabling technology for the fabrication of nanoporous protein cages for applications ranging from nano medicine to materials science.

The aim of the study was to determine the extent and mechanism of influence on silica condensation that is presented by a range of known silicifying recombinant chimeras (R5: SSKKSGSYSGSKGSKRRIL; A1: SGSKGSKRRIL; and Si4-1: MSPHPHPRHHHT and repeats thereof) attached at the N-terminus end of a 15-mer repeat of the 32 amino acid consensus sequence of the major ampullate dragline Spindroin 1 (Masp1) Nephila clavipes spider silk sequence ([SGRGGLGGQG AGAAAAAGGA GQGGYGGLGSQG](15)X). The influence of the silk/chimera ratio was explored through the adjustment of the type and number of silicifying domains (denoted X above), and the results were compared with their non-chimeric counterparts and the silk from Bombyx mori. The effect of pH (3-9) on reactivity was also explored. Optimum conditions for rate and control of silica deposition were determined, and the solution properties of the silks were explored to determine their mode(s) of action. For the silica-silk-chimera materials formed there is a relationship between the solution properties of the chimeric proteins (ability to carry charge), the pH of reaction, and the solid state materials that are generated. The region of colloidal instability correlates with the pH range observed for morphological control and coincides with the pH range for the highest silica condensation rates. With this information it should be possible to predict how chimeric or chemically modified proteins will affect structure and morphology of materials produced under controlled conditions and extend the range of composite materials for a wide spectrum of uses in the biomedical and technology fields.

Requiring mild synthesis conditions and possessing a high level of organization and functionality, biosilicas constitute a source of wonder and inspiration for both materials scientists and biologists. In order to understand how such biomaterials are formed and to apply this knowledge to the generation of novel bioinspired materials, a detailed study of the materials, as formed under biologically relevant conditions, is required. In this contribution, data from a detailed study of silica speciation and condensation using a model bioinspired silica precursor (silicon catechol complex, SCC) is presented. The silicon complex quickly and controllably dissociates under neutral pH conditions to well-defined, metastable solutions of orthosilicic acid. The formation of silicomolybdous (blue) complexes was used to monitor and study different stages of silicic acid condensation. In parallel, the rates of silicomolybdic (yellow) complex formation, with mathematical modeling of the species present, was used to follow the solution speciation of polysilicic acids. The results obtained from the two assays correlate well. Monomeric silicic acid, trimeric silicic acids, and different classes of oligomeric polysilicic acids and silica nuclei can be identified and their periods of stability during the early stages of silica condensation measured. For experiments performed at a range of temperatures (273-323 K), an activation energy of 77 kJ.mol(-1) was obtained for the formation of trimers. The activation energies for the forward and reverse condensation reactions for addition of monomers to polysilicic acids (273-293 +/- 1 K) were 55.0 and 58.6 kJ.mol(-1), respectively. For temperatures above 293 K, these energies were reduced to 6.1 and 7.3 kJ.mol(-1), indicating a probable change in the prevailing condensation mechanism. The impact of pH on the rates of condensation were measured. There was a direct correlation between the apparent third-order rate constant for trimer formation and pH (4.7-6.9 +/- 0.1) while values for the reversible first-order rates reached a plateau at circumneutral pH. These different behaviors are discussed with reference to the generally accepted mechanism for silica condensation in which anionic silicate solution species are central to the condensation process. The results presented in this paper support the use of precursors such as silicon catecholate complexes in the study of biosilicification in vitro. Further detailed experimentation is needed to increase our understanding of specific biomolecule silica interactions that ultimately generate the complex, finely detailed siliceous structures we observe in the world around us.

Osteoinductive and biodegradable composite biomaterials for bone regeneration were prepared by combining silk fibroin with silica particles. The influence of these composite systems on osteogenesis was evaluated with human mesenchymal stem cells (hMSCs) subjected to osteogenic differentiation. hMSCs adhered, proliferated, and differentiated towards osteogenic lineages on silk/silica films. The addition of the silica to the silk films influenced gene expression leading to upregulation of bone sialoprotein (BSP) and collagen type 1 (Col 1) osteogenic markers. Evidence for early bone formation in the form of collagen fibers and apatite nodules was obtained on the silk/silica films. Collagen fibers were closely associated with apatite deposits and overall collagen content was higher for the silica containing samples. Also, smaller sized silica particles (24 nm-2 μm) with large surface area facilitated silica biodegradation in vitro through particle dissolution, leading to ∼5-fold decrease in silica content over 10 weeks. These results indicate the suitability of silk/silica composite system towards bone regeneration, where degradation/remodeling rates of the organic and inorganic components can be controlled.

This book has contributions from the fourth Silicones and Silicone-Modified Materials symposium and invited chapters in the same overall subject area

A new method for the stepwise synthesis of propylamines containing fragments of N-methyl propylamine as found in diatom bioextracts is presented and their activity in silicic acid condensation is described.

Silica and silicates are extensively used in industry and medicine. The materials find use in paints, foods, medicines, adhesives, detergents, chromatography materials, catalysts and photonic materials (reviewed by Iler 1979). Silica may be produced at high temperature, via aqueous processing or by largely non-aqueous routes such as the low-temperature sol-gel process (reviewed in Brinker and Scherrer 1990; Hench and West 1990).Whatever the eventual use of the silica, it is its structure that determines its properties. By structure we mean order and organization on length scales from angstroms to the size of the final object, morphology, surface area, porosity and surface functionality. The essential building block is the SiO4 tetrahedron although other structural units such as the SiO6 octahedron are also used. These units can be put together in a wide range of patterns to yield both porous and non-porous crystalline materials including silica-based zeolite materials. As well as crystalline silica and silicates, an extremely diverse range of amorphous materials exist, such as disordered precipitates, gels, glasses and shaped objects (spheres, screws,hollow tubes etc.; Stoer et al. 1968; Yang et al. 1997; Miyaki et al. 1999), produced under a wide range of synthesis conditions. The amorphous materials, in contrast to their crystalline analogues, exhibit no long-range order and are built up from SiO4 tetrahedra with variable SiiaOiaSi bond angles and SiiaO bond distances.

Comment on the article Chitosan-catalyzed aggregation during the biomimetic synthesis of silica nanoparticles by Chang JS; Kong ZL; Hwang DF; et al

Biosilicifying organisms such as diatoms, sponges and higher plants deposit ornate “glassy” siliceous materials with well defined properties such as particle size and porosity at precisely controlled growth rates. Here we present the in vitro synthesis and characterisation of “glassy” silica with tailored properties by using naturally occurring amines—spermidine and spermine—and their analogues. These additives were found to regulate the growth rates, particle sizes, maturation, surface areas, porosities and morphologies of the siliceous materials prepared. In particular, the combination of unique catalytic effects and aggregation behaviours that are dependent on or related to chain length, intramolecular N–N spacing and C : N ratio of the additives was found to be responsible for controlling materials properties. Mechanisms regulating the generation of silicas showing a range of material characteristics are proposed.

Simon J. F. Macdonald,* Michael D. Dowle, Lee A. Harrison, Julie E. Spooner, Pritom Shah, Martin R. Johnson, Graham G. A. Inglis, Geoffrey D. E. Clarke, David J. Belton, Robin A. Smith, Christopher R. Molloy, Mary Dixon, Graham Murkitt, Rosalind E. Godward, Tadeusz Skarzynski, Onkar M. P. Singh, K. Abhhilash Kumar, Simon T. Hodgson, Edward McDonald, George W. Hardy, Harry Finch, Davina C. Humphreys and Gill Fleetwood