Search

The influence of three loading paths on the collapse of loose sand is analyzed with a particular attention paid to the onset of collapse and the mode of failure exhibited. Experimental results on conventional undrained triaxial compression tests, constant shear drained tests, as well as quasi-constant shear undrained path are presented, compared, and analyzed. It is now recognized that some collapses can occur before the Mohr-Coulomb plastic limit criterion is reached, and our recent results obtained with the new arrangement built up highlight that these collapses occur under a diffuse mode of failure. An extensive experimental series of tests shows that the first negative value of the second-order work computed using experimental data corresponds to the loss of controllability. Moreover, it is shown that the stress ratios at collapse and the corresponding mobilized angles of friction are very close for all types of tests. For similar void ratios, the onset of collapse is thus largely independent of the loading path under drained and undrained conditions but depends on a stress state to bring the material inside the unstable domain and also on the current direction of the stress increment. Indeed, it appears that the orientations of the stress increments at collapse for all tests are the same, what explains, according to the second-order work criterion, that collapse occurs at the same stress ratio. A potentially unstable domain, depending on the stress increment direction, can thus be defined. DOI: 10.1061/(ASCE)EM.1943-7889.0000101 CE Database subject headings: Stability; Soil analysis; Failures; Triaxial tests; Load tests; Sand, soil type; Granular media. Author keywords: Stability; Soil analysis; Collapse; Triaxial tests; Constant load tests; Loose sand.

This paper deals with Hill's bifurcation criterion, which is very well suited to describe various failure modes in granular media. The first part of this paper is dedicated to the analytical and numerical investigation of this criterion by considering phenomenological constitutive relations: the incrementally piece-wise linear and nonlinear relations proposed by Darve. The 3D bifurcation domain and 3D cones of unstable directions are given for these two relations. A similar analysis is performed with a micromechanical model in the second part of the article. Finally, a qualitative comparison of the results obtained with these two different approaches leads us to some key conclusions about this material instability criterion, which is studied for the first time for general 3D conditions, by considering these nonconventional constitutive relations. DOI: 10.1061/(ASCE)EM.1943-7889.0000003 CE Database subject headings: Granular materials; Material properties; Three-dimensional analysis; Bifurcations.