Search

Your search keyword '"Darcherif A-Moumen"' showing total 86 results
Start Over Author "Darcherif A-Moumen"
86 results on '"Darcherif A-Moumen"'

1. Investigation of the length and percentage fiber influence of Typha Australis on biosourced composites

Author

Ba Labouda, El Abbassi Ikram, Ngo Tien-Tung, Pliya Prosper, Kane Cheikh Sidi Ethmane, Darcherif A-Moumen, and Ndongo Mamoudou

Subjects
Environmental sciences, GE1-350
Abstract

This paper discusses the influence and content of Typha Australis fibers on the thermal and mechanical properties of clay composites. The objective is to find a better combination of length and percentage of fibers. This combination will allow to have a good compromise between thermal and mechanical properties. The results found at the end of this study are conclusive. Indeed, the increase of the length and the percentages of fibres improve the thermal properties but the values of the compressive resistances decrease.

Published
2022
Full Text
View/download PDF

2. The influence of Typha Australis as an insulation panel on the thermal performance of building

Author

Ba Labouda, EL ABBASSI Ikram, Kane Cheikh S.E, Darcherif A-Moumen, and Ndongo Mamoudou

Subjects
Environmental sciences, GE1-350
Abstract

Typha Australis is a plant that grows abundantly in fresh water. The proliferation of this plant causes health problems, so several measures have been taken to eradicate this problem such as: cutting the plant, coal production. So this article is about the valorisation of this plant as a bio-based material in order to solve the energy problem in the building. In this study, clay was used as a binder with a given percentage. The mixture of clay and Typha was used as an insulation panel and a comparison was made with a conventional habitat without an insulation panel. A dynamic thermal simulation was performed on TRNSYS to evaluate the influence of the use of this insulation panel on the energy consumption in the building. The results of the comparison showed that the use of this insulation panel, which is a mixture of clay and Typha Australis, reduced the energy requirement by 23%, which is a satisfactory result.

Published
2020
Full Text
View/download PDF

19. Opening address

Author

Darcherif, A.-Moumen, primary, El Ganaoui, M., additional, Nunzi, J.-M., additional, Sanap, Sudarshan B, additional, Bhojwani, VirendraK, additional, and Mathew, V K, additional

Published
2020
Full Text
View/download PDF

23. New Robust Energy Management Model for Interconnected Power Networks Using Petri Nets Approach

Author

El Ganaoui Mohammed, El Abbassi Ikram, Mouhammad Alanfaf Mohamed Mladjao, and Darcherif Abdel-Moumen

Subjects
Engineering, business.industry, Energy management, 020209 energy, 02 engineering and technology, Energy transition, Environmental economics, Energy engineering, Renewable energy, Smart grid, Intermittent energy source, 0202 electrical engineering, electronic engineering, information engineering, Electricity market, business, Simulation, Efficient energy use
Abstract

The problematic of energy management, particularly in terms of resources control and efficiency, has become in the space of a few years an eminently strategic subject. Its implementation is both complex and exciting as the prospects are promising, especially in relation with smart grids technologies. The deregulation of the electricity market, the high cost of storage, and the new laws on energy transition incite some significant users (collectivities, cities, regions, etc.) to form themselves into local producers in order to gain autonomy and reduce their energy bills. Thus, they may have their own sources (classic and/or renewable energy sources) to satisfy their needs and sell their excess production instead of storing it. In this idea, the territorial interconnection principle offers several advantages (energy efficiency, environmental protection, better economic balance). The main challenge of such systems is to ensure good energy management. Therefore, power distribution strategy must be implemented by matching the supply and the demand. Such systems have to be financially viable and environmentally sustainable. This allows among others to reduce the electricity bill and limit the systematic use of the national power network, typically using non-renewable sources, and thereby support sustainable development. This paper presents an original model for aid-decision in terms of grid configurations and control powers exchanged between interconnected territories. The model is based on Petri nets. Therefore, an iterative algorithm for power flow management is based on instantaneous gap between the production capability (photovoltaic, wind) and the demand of each user. So, in order to validate our model, we selected three French regions: the PACA region, the Champagne-Ardenne region and the Lorraine region. Due to their policy, their geographical and climatic features, we opted for two renewable sources: “wind” and “photovoltaic”. The numerical simulations are performed using the instantaneous productions of each region and their energy demand for a typical summer day. A detailed economic analysis is performed for two scenarios (with or without interconnections). The results show that the use of renewable energy in an interconnection context (i.e. pooling), offers serious economic and technical advantages.

Published
2016
Full Text
View/download PDF

24. Cyber-Risk and Security in Supply Chain Management Based on ICT Systems : A Stochastic Petri Nets Approach

Author

LABADI, Karim, Darcherif, A Moumen, Abbassi, Ikram El, Hamaci, Samir, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), EPMI-ECAM GROUP, Ecole Catholique d'Arts et Métiers, Université Paris 8 Vincennes-Saint-Denis (UP8)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and HAMACI, Samir

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2018

25. Industry 4.0: Global Analysis of Energy Considerations and Cyber-Security Constraints

Author

Abbassi, Ikram El, Hamaci, Samir, Labadi, Karim, Darcherif, a Moumen, EPMI-ECAM GROUP, Ecole Catholique d'Arts et Métiers, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), Université Paris 8 Vincennes-Saint-Denis (UP8)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and HAMACI, Samir

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2018

31. Modal Analysis for Validating Wind Turbine Models Dedicated To Vibration Studies

Author

Sellami, Takwa, Berriri, Hanen, Jelassi, Sana, Darcherif, A-Moumen, Mimouni, Mohamed Faouzi, Ecole Nationale d'Ingénieurs de Monastir, Université de Cergy Pontoise (UCP), Université Paris-Seine, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), ECS-Lab, Électronique et Commande des Systèmes Laboratoire (ECS-Lab), Ecole Nationale Supérieure de l'Electronique et de ses Applications-Ecole Nationale Supérieure de l'Electronique et de ses Applications, École Nationale d’Ingénieurs de Monastir (ENIM), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and Sellami, Takwa

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2016

32. Original Numerical Analysis Of Wind Turbine Vibrations

Author

sellami, takwa, Berriri, Hanen, Jelassi, Sana, Darcherif, A-Moumen, Mimouni, Mohamed Faouzi, Ecole Nationale d'Ingénieurs de Monastir, Université de Cergy Pontoise (UCP), Université Paris-Seine, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), ECS-Lab, Électronique et Commande des Systèmes Laboratoire (ECS-Lab), Ecole Nationale Supérieure de l'Electronique et de ses Applications-Ecole Nationale Supérieure de l'Electronique et de ses Applications, Sellami, Takwa, École Nationale d’Ingénieurs de Monastir (ENIM), and Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI)

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2016

39. Reference architecture for modeling the dynamic behavior of smart manufacturing systems

Author

Uzunova, Milka, Hamaci, Samir, Abbassi, Ikram El, Darcherif, A Moumen, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), EPMI-ECAM GROUP, Ecole Catholique d'Arts et Métiers, Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and Uzunova, Milka

Subjects
[SPI.AUTO] Engineering Sciences [physics]/Automatic, ComputingMilieux_MISCELLANEOUS, [SPI.AUTO]Engineering Sciences [physics]/Automatic
Abstract

International audience

Published
2015

40. Diagnostic des génératrices asynchrones dans une éolienne a vitesse variable à base d’un observateur de court-circuit statorique

Author

Sellami, Takwa, Berriri, Hanen, Jelassi, Sana, Darcherif, A-Moumen, Mimouni, Mohamed Faouzi, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), Université de Cergy Pontoise (UCP), Université Paris-Seine, École Nationale d’Ingénieurs de Monastir (ENIM), ECS-Lab, Électronique et Commande des Systèmes Laboratoire (ECS-Lab), Ecole Nationale Supérieure de l'Electronique et de ses Applications-Ecole Nationale Supérieure de l'Electronique et de ses Applications, Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), Ecole Nationale d'Ingénieurs de Monastir, and Sellami, Takwa

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2015

41. PLANNING AND SCHEDULING OF PRODUCTION SYSTEM IN CONDITIONING LINE: INDUSTRIAL APPLICATION, OPTIMIZATION AND SIMULATION APPROACH.

Author

Majdoub Hassani, Zineb Ibn, El Barkany, Abdellah, El Abbassi, Ikram, Jabri, Abdelouahhab, and Darcherif, Abdel Moumen

Subjects
PRODUCTION scheduling, PRODUCTION planning, INDUSTRIAL applications, INDUSTRIAL costs, MATHEMATICAL models
Abstract

In this article we present an industrial application of our mathematical model that integrates planning and scheduling. Our main objective is to concretize our model and compare the reel results with the theoretical ones. Our application is realized on a conditioning line of pharmaceutical products at the ECAM EPMI production laboratory. For this reason and to save time, we used Witness simulation tool. It gives an overall idea of how the line works, the Makespan of each simulation and it highlights areas for improvement. We looked for the best resulting sequence which corresponds to the minest Makespan and total production cost. Then this sequence is applied on the conditioning line of pharmaceutical products for simulation. On the other hand, we program our mathematical model with the parameters of the conditioning line under python in version 3.6 and we adopt a simulation/optimization coupling approach to verify our model. [ABSTRACT FROM AUTHOR]

Published
2019
Full Text
View/download PDF

42. NEW MODEL OF PLANNING AND SCHEDULING FOR JOB-SHOP PRODUCTION SYSTEM WITH ENERGY CONSIDERATION.

Author

Hassani, Zineb Ibn Majdoub, Barkany, Abdellah El, Abbassi, Ikram El, Jabri, Abdelouahhab, and Darcherif, Abdel Moumen

Subjects
PRODUCTION scheduling, MIXED integer linear programming, ENERGY consumption
Abstract

This paper reports a new multi-item planning and scheduling problem in a job-shop production system with the consideration of energy consumption. A mixed integer linear programming is proposed to integrate planning and scheduling with the consideration of energy aspect. In this study a new operational constraint is considered in the tactical level because of the huge interest given to energy consumption and its strong link existing with production system. To evaluate the performance of this model, computational experiments are presented, and numerical results are given using the software CPLEX and then discussed. [ABSTRACT FROM AUTHOR]

Published
2019
Full Text
View/download PDF

43. Reference architecture for modeling the dynamic behavior of smart manufacturing systems

Author

Hamaci, Samir, Abbassi, Ikram El, Darcherif, A Moumen, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), EPMI-ECAM GROUP, Ecole Catholique d'Arts et Métiers, and Université Paris 8 Vincennes-Saint-Denis (UP8)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Internationale des Sciences du Traitement de l'Information (EISTI)

Subjects
[SPI]Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS, [SPI.AUTO]Engineering Sciences [physics]/Automatic
Abstract

International audience

Published
2015

47. On Marking of Continuous Generalized Timed Events Graphs

Author

Hamaci, Samir, Labadi, Karim, Darcherif, a Moumen, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and HAMACI, Samir

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2014

49. Petri Nets Models for Analysis and Control of Bicycle Sharing Systems

Author

Labadi, Karim, Benarbia, Taha, Hamaci, Samir, Darcherif, a Moumen, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), Equipe Commande des Systèmes (ECS), Ecole Nationale Supérieure de l'Electronique et de ses Applications, Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and HAMACI, Samir

Subjects
[SPI]Engineering Sciences [physics], [SPI.AUTO] Engineering Sciences [physics]/Automatic, [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS, [SPI.AUTO]Engineering Sciences [physics]/Automatic
Abstract

International audience

Published
2012

50. Allocating Resources of Weighted T-Systems for Adaptive Behavior

Author

BENFKIR, Abderrahim, Hamaci, Samir, Darcherif, A Moumen, Laboratoire QUARTZ (QUARTZ ), Université Paris 8 Vincennes-Saint-Denis (UP8)-SUPMECA - Institut supérieur de mécanique de Paris (SUPMECA)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), Université Paris 8 Vincennes-Saint-Denis (UP8)-Ecole Nationale Supérieure de l'Electronique et de ses Applications (ENSEA)-SUPMECA - Institut supérieur de mécanique de Paris-Ecole Internationale des Sciences du Traitement de l'Information (EISTI), and HAMACI, Samir

Subjects
[SPI]Engineering Sciences [physics], [SPI] Engineering Sciences [physics], ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2012

Catalog

Books, media, physical & digital resources
See catalog results