Search

The aim was to apply a cassava starch/carboxymethyl cellulose blend-based edible coating added to a tocopherol mix to Brazil nuts and evaluate oxidative levels during storage. The edible coatings were prepared from a cassava starch/carboxymethyl cellulose blend and identified as control B (no soy lecithin and no tocopherol mix), L (with soy lecithin and no tocopherol mix), and LT and LT2 (with soy lecithin and tocopherol mix). In the forming solutions of the coatings, stability, viscosity, pH, and color were analyzed. The Brazil nuts were immersed in the solutions for 30 s, dried at 45 °C, and placed in an incubator at 25 °C. At 1, 7, 15, 30, 45, 60, 90, and 120 days of storage, mass loss, the browning index, conjugated dienes and trienes, the oxidative state by official methods, and the accelerated oxidation index were evaluated. The blend-forming solutions B, L, LT, and LT2 showed non-Newtonian and pseudoplastic behavior, excellent resistance to flow, and stability. The diene, triene, iodine value, peroxide value, p-anisidine value, and total oxidation indices showed that the application of the cassava starch/carboxymethyl cellulose blend-based edible coating added tocopherol mix, LT, and LT2 preserved the Brazil nuts up to 90 days of storage at 25 °C. PCA shows that all coatings applied to Brazil nuts promoted oil preservation in some evaluation periods, especially those added with a tocopherol mix. It is concluded that cassava starch/CMC added tocopherol mix edible coatings have a potential application as active packaging for foods, especially nuts.

The aim was to evaluate the technological properties of films based on cassava starch/carboxymethyl cellulose added to soy lecithin and tocopherol mix. The films were prepared by casting from a cassava starch/carboxymethyl cellulose mixture and identified as control B (no soy lecithin and no tocopherol mix), L (with soy lecithin and no tocopherol mix) and LT and LT2 (with soy lecithin and tocopherol mix). Thickness, water solubility, water content, film weight, contact angle, permeability test, mechanical tests, antioxidant activity, biodegradability, color, thermogravimetry, and FTIR tests were performed. The results showed that the films containing soy lecithin (L, LT, and LT2) were more hydrophilic and had a denser structure than film B, but the LT and LT2 films were slightly yellow-green, malleable and showed few bubbles or cracks. In addition, all the films developed are biodegradable. It was also found that the antioxidant remained in the films to which it was added (LT and LT2) and that the LT2 film showed the highest antioxidant activity. It is strongly recommended for application in active food packaging.

ABSTRACT: The pequi has an almond with interesting chemical characteristics, such as considerable proportions of proteins and lipids that can be applied in several products aiming to use this agro-industrial residue. This research tookadvantage of the almond for the development of sweet paçoca with different concentrations of pequi almond, containing 0% (PA), 25% (P1), 50% (P2), 75% (P3), and 100% (P4) in place of peanuts. The paçocas were evaluated for proximate parameters and water activity, mineral content, color parameters, microbiological characteristics, and texture profile. The results for aw ranged from 0.48 to 0.52. In the proximate composition, it was observed that with the increase of the almond flour there was a difference in the ash, moisture, and protein contents. Due to the almond roasting process, the paçocas of pequi presented the darkest color. Pequi almond paçocas showed better protein value than peanut paçoca and higher levels of P and Mg. In addition, they present better elasticity, chewability, and cohesiveness.

The objective of this study was to develop and characterize cassava-starch-based films incorporated with buriti (Mauritia flexuosa L.) oil and emulsifier (Tween 20). An experimental factorial design 22 with three central points was used to develop the films, by varying the concentrations of buriti oil (0.15 to 0.45% w/v) and emulsifier (0.02 to 0.04% w/v). Film thickness and weight increased with increasing buriti oil concentration. The water vapor permeability of the films ranged from 0.22 to 0.366 g mm h−1 m−2 kPa−1. The tensile strength values varied from 4.21 to 6.95 MPa, the elasticity modulus varied from 538.53 to 722.78 MPa, and elongation to rupture varied from 1.13 to 1.66%. The film color was characterized as yellowish, dark, and intense (higher oil content); and clear and a low-intensity color (lower oil content). The films presented a total carotenoid content ranging from 3.63 to 29.73 μg β-carotene/g, which may have resulted in their antioxidant potential against DPPH• (1,1-diphenyl-2-picryl-hydrazyl) radical (from 74.28 to 87.74%). The central formulation of the experimental design (buriti oil 0.30% and emulsifier 0.03%) presented a good performance and can be applied as packaging for foods with a lower water content and that demand protection against oxidation.

Millions of people in the world live in food insecurity, so identifying a tuber with characteristics capable of meeting the demand for food and also identifying active compounds that can be used to minimize harm to human health is of great value. The aim was to carry out a review based on systematic review tools and the main objective was to seek information on botanical, food, pharmacological, and phytochemical aspects of Casimirella sp. and propose possible applications. This review showed papers that addressed botanical, food, pharmacological, and phytochemical aspects of the Mairá-potato and presented suggestions for using this tuber allied to the information described in the works found in the Google Academic, Scielo, Science Direct, Scopus, PubMed, and Web of Science databases. This review synthesized knowledge about the Mairá-potato that can contribute to the direction of further research on the suggested technological applications, both on the use of this tuber as a polymeric material and its use as biomaterial, encapsulation, bioactive use, and 3D printing, because this work collected information about this non-conventional food plant (PANC) that shows great potential for use in various areas of study.