Search

Parkinsonian gait is a defining feature of shaking palsy (SP) and it has one of the worse impacts on human healthy life than other SP symptoms. The objective of this work is to propose a Parkinsonian gait detection system based on an S-band perception technique to classify abnormal gait and normal walking. Due to the differences in the Gaits of Parkinson's patients compared with healthy persons, the wireless signals reflect and generates different variations at the receiver that could be used for SP diagnosis and classification. To detect a Parkinsonian gait, we first implement data preprocessing of the original data to obtain clear amplitude and phase information. Then, the feature extraction is carried out by principal component analysis (PCA). Finally, a support vector machine (SVM) classification algorithm is applied on collected data to classify the abnormal gait of SP patients compared with a normal gait. We evaluate the proposed system with different people, and the experimental outcomes show that the Parkinsonian gait detection of this training-based system achieves a high accuracy of above 90%. Moreover, the early warning of SP is achieved in a non-contact manner.

Objective: Non-invasive respiration detection methods are of great value to healthcare applications and disease diagnosis with their advantages of minimizing the patient's physical burden and lessen the requirement of active cooperation of the subject. This method avoids extra preparations, reduces environmental constraints, and strengthens the possibility of real-time respiratory detection. Furthermore, identifying abnormal breathing patterns in real-time is necessary for the diagnosis and monitoring of possible respiratory disorders. Method: A non-invasive method for detecting multiple breathing patterns using C-band sensing technique is presented, which is used for identifying different breathing patterns in addition to extract respiratory rate. We first evaluate the feasibility of this non-contact method in measuring different breathing patterns. Then, we detect several abnormal breathing patterns associated with certain respiratory disorders at real time using C-band sensing technique in indoor environment. Results: Mean square error (MSE) and correlation coefficient (CC) are used to evaluate the correlation between C-band sensing technique and contact respiratory sensor. The results show that all the MSE are less than 0.6 and all CC are more than 0.8, yielding a significant correlation between the two used for detecting each breathing pattern. Clinical Impact: C-band sensing technique is not only used to determine respiratory rates but also to identify breathing patterns, regarding as a preferred noncontact alternative approach to the traditional contact sensing methods. C-band sensing technique also provides a basis for the non-invasive detection of certain respiratory disorders.

Humans’ daily behavior can reflect the main physiological characteristics of neurological diseases. Human gait is a complex behavior produced by the coordination of multiple physiological systems, such as the nervous system and the muscular system. It can reflect the physiological state of human health, and its abnormality is an important basis for diagnosing some nervous system diseases. However, many early gait anomalies have not been effectively discovered because of medical costs and people’s living customs. This paper proposes an effective, economical, and accurate non-contact cognitive diagnosis system to help early detection and diagnosis of paralysis agitans under daily life conditions. The proposed system extract data from wireless state information obtained from antenna-based data gathering module. Further, we implement data processing and gait classification systems to detect abnormal gait based on the acquired wireless data. In the experiment, the proposed system can detect the state of human gait and carries high classification accuracy up to 96.7%. The experimental results demonstrate that the proposed technique is feasible and cost-effective for healthcare applications.

An electronic fuze is a one-shot system that has a long storage life and high mission criticality. Fuzes are designed, developed, and tested for high reliability (over 99%) with a confidence level of more than 95%. The electronic circuit of a fuze is embedded in the fuze assembly, and thus is not visible. Go/NoGo fuze assembly mission critical testing does not provide prognostic information about electrical and electronic circuits and subtle causes of failure. Longer storage times and harsh conditions cause degradation at the component level. In order to calculate accrued damage due to storage and operational stresses, it is necessary to perform sample-based accelerated life testing after a certain time and estimate the remaining useful life of mission critical parts. Reliability studies of mechanical parts of such systems using nondestructive testing (NDT) have been performed, but a thorough investigation is missing with regards to the electronic parts. The objective of this study is to identify weak links and estimate the reliability and remaining useful life of electronic and detonating parts. Three critical components are identified in an electronic fuze circuit (1) a diode, (2) a capacitor, and (3) a squib or detonator. The accelerated test results reveal that after ten years of storage life, there is no significant degradation in active components while passive components need to be replaced. The squib has a remaining useful life (RUL) of more than ten years with reliability over 99%.

In our daily life, inadvertent scratching may increase the severity of skin diseases (such as atopic dermatitis etc.). However, people rarely pay attention to this matter, so the known measurement behaviour of the movement is also very little. Nevertheless, the behaviour and frequency of scratching represent the degree of itching, and the analysis of scratching frequency is helpful to the doctor's clinical dosage. In this Letter, a novel system is proposed to monitor the scratching motion of a sleeping human body at night. The core device of the system is just a leaky coaxial cable (LCX) and a router. Commonly, LCX is used in the blind field or semi-blindfield in wireless communication. The new idea is that the leaky cable is placed on the bed, and then the state information of physical layer of wireless communication channels is acquired to identify the scratching motion and other small body movements in the human sleep process. The results show that it can be used to detect the movement and its duration. Channel state information (CSI) packet is collected by card installed in the computer based on the 802.11n protocol. The characterisation of the scratch motion in the collected CSI is unique, so it can be distinguished from the wireless channel amplitude variation trend.

Human respiratory activity parameters are important indicators of vital signs. Most respiratory activity detection methods are naïve abd simple and use invasive detection technology. Non-invasive breathing detection methods are the solution to these limitations. In this research, we propose a non-invasive breathing activity detection method based on C-band sensing. Traditional non-invasive detection methods require special hardware facilities that cannot be used in ordinary environments. Based on this, a multi-input, multi-output orthogonal frequency division multiplexing (MIMO-OFDM) system based on 802.11n protocol is proposed in this paper. Our system improves the traditional data processing method and has stronger robustness and lower bit relative error. The system detects the respiratory activity of different body postures, captures and analyses the information, and determines the influence of different body postures on human respiratory activity.

This research presents the usage of modern 5G C-Band sensing for health care monitoring. The focus of this research is to monitor the respiratory symptoms for COPD （Chronic Obstructive Pulmonary Disease）. The C-Band sensing is used to detect the respiratory conditions, including normal, abnormal breathing and coughing of a COPD patient by utilizing the simple wireless devices, including a desktop system, network interface card, and the specified tool for the extraction of wireless channel information with Omni directional antenna operating at 4.8 GHz frequency. The 5G sensing technique enhances the sensing performance for the health care sector by monitoring the amplitude information for different respiratory activities of a patient using the above-mentioned devices. This method examines the rhythmic breathing patterns obtained from C-Band sensing and digital respiratory sensor and compared the result.

In this study, a biological microactuator was demonstrated by closed-loop motion control of the front leg of an insect (Mecynorrhina torquata, beetle) via electrical stimulation of the leg muscles. The three antagonistic pairs of muscle groups in the front leg enabled the actuator to have three degrees of freedom: protraction/retraction, levation/depression, and extension/flexion. We observed that the threshold amplitude (voltage) required to elicit leg motions was approximately 1.0 V; thus, we fixed the stimulation amplitude at 1.5 V to ensure a muscle response. The leg motions were finely graded by alternation of the stimulation frequencies: higher stimulation frequencies elicited larger leg angular displacement. A closed-loop control system was then developed, where the stimulation frequency was the manipulated variable for leg-muscle stimulation (output from the final control element to the leg muscle) and the angular displacement of the leg motion was the system response. This closed-loop control system, with an optimized proportional gain and update time, regulated the leg to set at predetermined angular positions. The average electrical stimulation power consumption per muscle group was 148 µW. These findings related to and demonstrations of the leg motion control offer promise for the future development of a reliable, low-power, biological legged machine (i.e., an insect-machine hybrid legged robot).

Objective –This study investigates the role of customer service support (CSS) in co-creating brand value and enhancing corporate performance in the fintech industry. The research focuses on analyzing the impact of CSS on the customer journey from registration to first deposit. Methodology – The study utilizes historical data analysis and A/B testing. Client data from a leading fintech company is analyzed to compare conversion rates between those who used CSS versus those who did not. An A/B test is then conducted using a specialized support team targeting clients who haven’t made a deposit and had less than 2 chats with CSS. Findings –Clients who used CSS before depositing had 5 times higher conversion rates. The A/B test found a 3.1 percentage point (9.3% relative) increase in conversion from using targeted support. Novelty –This study provides new empirical evidence on the impact of CSS as a brand value co-creator in fintech, with a novel methodology to enhance corporate performance. [ABSTRACT FROM AUTHOR]