Search

A newly synthesized upper rim azocalix[4]arene, namely 5,11,17,23-tetra[(4-ethylacetoxyphenyl) (azo)]calix[4]arene, CA-AZ has been fully characterized, and its chromogenic and selective properties for anions are reported. Among univalent anions, the receptor is selective for the fluoride anion, and its mode of interaction in solution is discussed. The kinetics of the complexation process were found to be very fast as reflected in the immediate colour change observed with a naked eye resulting from the receptor-anion interaction. An emphasis is made about the relevance in selecting a solvent in which the formulation of the process is representative of the events taking place in the solution. The composition of the fluoride complex investigated using UV/VIS spectrophotometry, conductance measurements and titration calorimetry was 1:1, and the thermodynamics of complexation of anions and CA-AZ in DMSO were determined. The fluoride complex salt was isolated, and a detailed investigation was carried out to assess its ability to remove CO 2 from the air. The recycling of the complex was easily achieved. Final conclusions are given.

The solution behavior of pharmaceuticals (acetylsalicylic acid, 4-acetoxybenzoic acid and 5-acetylsalicylic acid) in water and N,N-Dimethylformamide (DMF) at 298.15 K were investigated through solubility, conductance and calorimetric measurements. Taking into account the formation of ion pairs of these pharmaceuticals in water, the solution Gibbs energies of the dissociated electrolytes in this solvent were calculated. Thus, the solution thermodynamics of these compounds in water are reported using enthalpy data obtained by calorimetry. These pharmaceuticals undergo solvation when exposed to a saturated atmosphere of DMF. As the composition of the solid is not the same as that in solution, the Gibbs energy of the solutions of these compounds could not be obtained; only enthalpy data are reported. The thermodynamics of the interaction of acetylsalicylic acid (aspirin) with β-cyclodextrin in water and DMF is fully discussed, emphasizing the two different processes that take place in water at the two different pHs. In all cases, the favorable Gibbs energies for these processes are entropically controlled, mainly resulting from the higher dehydration/desolvation that the receptor undergoes upon interaction with the guest.

Colorectal cancer (CRC) is a disease which is causing a high degree of mortality around the world. The present study reports the antiproliferative impact of the thioacetamide calix[4]arene, CAII receptor on a highly differentiated Caco-2 cell line. This statement is corroborated by the MTT assay results which revealed a reduction in the cell viability with an IC50 value of 19.02 ± 0.04 µM. Microscopic results indicated that at the starting amount of 10 µM of CAII, a decrease in cells confluency can already be observed in addition to changes in cells morphology. Cell metabolic pathway changes were also investigated. 1 H NMR findings showed downregulation in lactate, pyruvate, phosphocholine, lipids, and hydroxybutyrate with the upregulation of succinate, indicating a decline in the cells proliferation. Some biochemical alterations in the cells as a result of the CAII treatment were found by Raman spectroscopy.

A recyclable mercury(ii) selective dimer based on a calix[4]pyrrole derivative has been synthesised and characterised by mass and FT-IR spectrometry, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX). Information regarding the ability of the dimer to interact with metal cations was obtained from FTIR and SEM-EDX analyses. A striking feature of micrographs of the loaded dimer is the change of morphology with the cation. Based on these results, optimal conditions for removing cations from water were assessed under different experimental conditions. Results obtained demonstrate that the removal process is fast. Capacity values and selectivity factors show that the dimer is selective for Hg(ii) in single and multiple component metal solutions relative to other cations. Single-ion transfer Gibbs energies from water to a solvent containing common functionalities to those of the dimer were used to assess the counter-ion effect on the removal process. Agreement is found between these data and energy calculations derived from molecular simulation studies. Studies on polluted water in the presence of normal water components in addition to toxic metal cations are reported. Further experimental work on wastewater from the mining industry is in progress., Competing Interests: There are no conflicts of interest to declare, (This journal is © The Royal Society of Chemistry.)

The synthesis and characterisation of a partially substituted calix[4]arene, namely, 5,11,17,23-tetra-tert-butyl,25,27-bis[aminoethoxy] 26,28-dihydroxycalix[4]arene are reported. Its interaction with commonly used pharmaceuticals (clofibric acid, diclofenac and aspirin) was investigated by spectroscopic ( 1 H NMR and UV), electrochemical (conductance measurements) and thermal (titration calorimetry) techniques. It is concluded on the basis of the experimental work and molecular simulation studies that the receptor interacts selectively with these drugs. Preliminary studies on the selective extraction of these pharmaceuticals from water by the calix receptor are reported and the potential for a carrier mediated sensor based on this ligand for 'on site' monitoring of pharmaceuticals is discussed., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Birnessite nanotubes and activated carbon electrodes have been used in supercapacitor cells to assess the performance of new aqueous based electrolyte systems at temperatures as low as -30 °C. The addition of ethylene glycol to aqueous sodium, lithium, potassium and ammonium sulfates has resulted in electrolytes that are still in liquid phase at such low temperatures. Extensive electrochemical testing showed that in such systems, operation of these aqueous based supercapacitors is possible at -30 °C with a specific capacitance of over 30 F g(-1) and good cycleability.

Contamination of water by heavy metals is a global problem, to which an inexpensive and simple solution is required. Within this context the unique properties of diatomite and its abundance in many regions of the world have led to the current widespread interest in this material for water purification purposes. Defined sections on articles published on the use of raw and modified diatomite for the removal of heavy metal pollutants from water are critically reviewed. The capability of the materials as extracting agents for individual species and mixtures of heavy metals are considered in terms of the kinetics, the thermodynamics and the recyclability for both, the pollutant and the extracting material. The concept of 'selectivity' for the enrichment of naturally occurring materials such as diatomite through the introduction of suitable functionalities in their structure to target a given pollutant is emphasised. Suggestions for further research in this area are given., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Following the synthesis and characterization of meso-tetramethyl tetrakis (4-phenoxy acetone) calix[4]pyrrole, 1, the solution properties of this receptor in various solvents were investigated. Particular emphasis is placed on the selection of the solvent in assessing thermodynamic selectivity in ion complexation studies involving calixpyrrole receptors. Thus, statements recently made in the literature are addressed.The interaction of 1 with anions and cations was assessed through (1)H NMR in CD(3)CN at 298 K. Among anions, significant chemical shift changes were observed in the pyrrolic protons by the addition of halide salts to 1 in the deuterated solvent. The sequence observed in the Deltadelta values is that observed in the transfer Gibbs energies of these anions from a dipolar aprotic (acetonitrile) to a protic medium (representative of 1) based on the Ph(4)AsPh(4)B convention. As far as metal cations in CD(3)CN are concerned, the most significant changes are observed (relative to those of the ligand) in the protons of the phenoxy acetone functionality upon the addition of the mercury(ii) salt to 1. Conductance measurements reveal the formation of 1 : 1 complexes with these ions. Thermodynamic data derived from titration calorimetry are reported and compared with available data for analogous ligands. A quantitative evaluation of the thermodynamic stability was carried out. The applications of these ligands as anchor groups in oligomeric frameworks are discussed. Final conclusions are given.

We describe here a procedure to bridge the gap in the field of calixarene physicochemistry between solid-state atomic-resolution structural information and the liquid-state low-resolution thermodynamics and spectroscopic data. We use MD simulations to study the kinetics and energetics involved in the complexation of lower rim calix[4]arene derivatives (L), containing bidentate ester (1) and ketone (2) pendant groups, with acetonitrile molecule (MeCN) and Cd(2+) and Pb(2+) ions (M(2+)) in acetonitrile solution. On one hand, we found that the prior inclusion of MeCN into the calix to form a L(MeCN) adduct has only a weak effect in preorganizing the hydrophilic cavity toward metal ion binding. On the other hand, the strong ion-hydrophilic cavity interaction produces a wide open calix which enhances the binding of one MeCN molecule (allosteric effect) to stabilize the whole (M(2+)) L(MeCN) bifunctional complex. We reach two major conclusions: (i) the MD results for the (M(2+)) 1(MeCN) binding are in close agreement with the "endo", fully encapsulated, metal complex found by X-ray diffraction and in vacuo MD calculations, and (ii) the MD structure for the more flexible 2 ligand, however, differs from the also endo solid-state molecule. In fact, it shows strong solvation effects at the calixarene lower bore by competing MeCN molecules that share the metal coordination sphere with the four CO oxygens of an "exo" (M(2+)) 2(MeCN) complex.

A partially substituted calix[4]resorcarene receptor, namely, 5,17-ethylthiomethylated calix[4]resorcarene, 1, has been synthesized and characterized by 1H NMR in CD3OD, CDCl3, and CD3CN and 13C NMR in CD3OD, as well as by 2D NMR. Partition data in the methanol-hexane and acetonitrile-hexane solvent systems show that the monomeric species are predominant in these solvents. The solubility of 1 in various solvents was determined at 298.15 K. These data were used to calculate the standard solution Gibbs energy of 1 in these solvents. Taking hexane as the reference solvent, the standard transfer Gibbs energy of 1 to various solvents was calculated. Good agreement is found between the DeltatG(o) values in the hexane-methanol and hexane-acetonitrile and the DeltapG(o) values of this ligand in these solvent systems. The higher partition constant of 1 in the hexane-methanol relative to the hexane-acetonitrile solvent system contrasts with corresponding data for the fully functionalized receptor, 2. This is explained in terms of the solvation differences of these receptors in these solvents as reflected in the DeltatG(o) values. The cation complexing properties of this receptor were investigated through 1H NMR, conductance, calorimetric, and potentiometric methods. Among the metal cations (alkali, alkaline earth, heavy, and transition), 1 interacts only with Ag+ in methanol and Hg2+ in propylene carbonate, acetonitrile, methanol, and N,N-dimethylformamide. While 1 forms a 1:1 complex with Ag+ in methanol, the hosting ability of the receptor for the mercury cation is enhanced in methanol, acetonitrile, and N,N-diethylformamide. Thus, Hg2+ complexes of 1:2 (ligand:metal cation) stoichiometry are found in these solvents. In moving to propylene carbonate, the composition of the mercury complex is altered from 1:2 to 1:1. The results are compared with corresponding data for 2 and these metal cations in the appropriate solvents. The lack of stability observed for 2 and Hg2+ in acetonitrile resulting from the departure of pendant arms from the resorcarene backbone greatly contrasts with the high stability observed for 1 and this metal cation in the various solvents. Preliminary results on the extraction of silver picrate by this ligand in the water-dichloromethane solvent system are reported. Final conclusions are given.

A new calix[4]pyrrole-based macrocycle, meso-tetramethyl-tetrakis{4-[2-(ethylthio)ethoxy]phenyl}calix[4]pyrrole, 7, has been synthesized and fully characterized. Unlike other calixpyrrole derivatives that show selective interaction with anions, calixpyrrole 7 described in the present work forms stable complexes with both metal cations and anions. The thermodynamics of complexation of this ditopic calixpyrrole derivative with metal cations (Hg2+ and Ag+) and the fluoride anion in nonaqueous solutions have been determined by titration calorimetry, and the host-guest composition has been investigated by using conductance measurements at 298.15 K. 1H NMR studies provide clear evidence about the sites of complexation of 7 with the ionic species, which show that the NH groups are taking part in the complexation of this ligand with the fluoride anion while the sulfur donor atoms are responsible for the interaction with metal cations. Using the present data on 7 and structurally related analogues (1-6), the complexation behavior is discussed comparatively from the thermodynamic point of view. Possessing four sulfur-containing pendent arms, 7 displays an enhanced hosting ability for Hg2+ in acetonitrile. As compared with 1, the calixpyrrole derivative, 7, shows a unique interaction with fluoride among the anions investigated in acetonitrile and dimethyl sulfoxide. As far as the fluoride complex is concerned, the medium effect is assessed in terms of the thermodynamics of the transfer of reactants and product from acetonitrile (reference solvent) to dimethyl sulfoxide.

The complexation ability of a partially substituted lower rim calix[4]arene hydroxyamide derivative, 25,27-bis[N-(2-hydroxy-1,1-bishydroxymethylethyl)amino- carbonylmethoxy]calix[4]arene-26,28-diol, 1, for cations and anions was investigated through (1)H NMR, conductometry, spectrophotometry, and calorimetry in dipolar aprotic media. (1)H NMR studies of 1 in the deuterated solvents (acetonitrile, methanol, and dimethylsulfoxide) reflect ligand-solvent interactions in methanol and dimethylsulfoxide. As far as the cations are concerned, a selectivity peak is found when standard Gibbs energies of complexation of 1 with cations (alkaline-earth, zinc, and lead) are plotted against corresponding data for cation hydration. This finding reflects the key role played by the desolvation and binding processes in the overall complexation of this receptor and these cations in acetonitrile. This is also interpreted in terms of enthalpy and entropy data. Factors such as, the nature and the arrangement of donor atoms in the hydrophilic cavity of the ligand on cation complexation process, are discussed. This paper also addresses anion complexation processes. It is found that 1 interacts through hydrogen bond formation with fluoride, dihydrogen phosphate, and pyrophosphate in acetonitrile and N,N-dimethylformamide. The thermodynamics associated with these processes is fully discussed taking into account literature data involving calix[4]pyrroles and these anions in these solvents. Previous work regarding the water solubility of these ligands is discussed. It is concluded that 1 behaves as a ditopic ligand in dipolar aprotic media.

Two isomeric structures of meso-tetramethyltetrakis(3-hydroxyphenyl)calix[4]pyrrole, 4-alphaalpha betabeta and 4-alphabeta alphabeta, have been isolated and characterized by 1H NMR in different solvents (CD3CN, CD3OD, and DMSO-d6) at 298 K. Standard Gibbs energies of solution derived from solubility data in various solvents were used to calculate the transfer Gibbs energy, delta(t)G(o), of these ligands using acetonitrile as the reference solvent. These results are consistent with the 1H NMR studies in different media that show chemical shift changes observed in the resonances of the NH and the OH protons of these ligands. Solvate formation was observed when these isomers were exposed to saturated atmosphere of N,N-dimethylformamide, dimethyl sulfoxide and propylene carbonate. Anion interaction involving 4-alphaalpha betabeta and 4-alphabeta alphabeta was investigated by 1H NMR in CD3CN while the complex composition was assessed through conductance measurements. Significant differences are observed in the affinity of these ligands for anions as well as in the composition of the fluoride complexes. Thus 4-alphaalpha betabeta shows selectivity for H2PO4(-) in acetonitrile while its isomer 4-alphabeta alphabeta is selective for the fluoride anion. Again the complex composition is altered for the fluoride anion when complexed with 4-alphaalpha betabeta in acetonitrile (1:1 complex) relative to 4-alphabeta alphabeta in the same solvent. The latter isomer shows an enhanced hosting ability for this anion. Thus two anions are taken up per unit of ligand. The thermodynamics of complexation of H2PO4(-) and these ligands in acetonitrile is discussed, and the results are compared with those involving calix[4]pyrrole and this anion in this solvent. It is shown that the isomers interact with two H2PO4(-) anions while one calix[4]pyrrole unit interacts with this anion. This paper demonstrates for the first time that the enthalpy parameter may be a suitable reporter of the number of hydrogen bonds formed when calix[4]pyrrole and its derivatives interact with the dihydrogen phosphate anion in acetonitrile. In moving from acetonitrile to N,N-dimethylformamide, 4-alphaalpha betabeta is unable to enter complexation with most anions, except fluoride, with which the formation of a 1:2 (ligand:anion) complex is demonstrated. The rather versatile behavior of these receptors for anions is explained on the basis of 1H NMR evidence and solvation effects. These investigations highlight the importance of the medium effect on the stability of the complex and reflect the inherent nature of the solvent and its highly significant involvement in the complexation process.

Standard solution Gibbs energies, DeltasG degrees, of the resorcarene-based receptor 5,11,17,23-ethylthiomethylated calix[4]resorcarene, (characterized by 1H NMR and X-ray diffraction studies) in its monomeric state (established through partition experiments) in various solvents are for the first time reported in the area of resorcarene chemistry. Transfer Gibbs energies of from hexane (reference solvent) to other medium are calculated. Agreement between DeltatG degrees (referred to the pure solvents) and standard partition Gibbs energies, DeltapG degrees (solvent mutually saturated) is found. Cation-ligand interactions were investigated through 1H NMR (CD3CN and CD3OD) and conductometric titrations in acetonitrile and methanol. 1H NMR data revealed the sites of interaction of with the metal cation. The composition of the metal-ion complexes (Ag+ and Pb2+ in acetonitrile and Ag+ and Cu2+ in methanol) was established through conductometric titrations. Thus, complexes of 1:1 stoichiometry were formed between and Ag+ and Pb2+ in acetonitrile and Cu2+ in methanol. However, in moving from acetonitrile to methanol, the composition of the silver complex was altered. Thus, two metal cations are hosted by a unit of the ligand. As far as Cu2+ and in acetonitrile is concerned, conductance data suggest that metalates are formed in which up to four units of Cu2+ are taken up per unit of resorcarene. The contrasting behavior of with Cu2+ in acetonitrile relative to methanol is discussed. As far as mercury (II) is concerned, the unusual jump in conductance observed in the titration of Hg2+ with in acetonitrile and methanol after the formation of a multicharged complex (undefined composition) is attributed to the presence of highly charged smaller units (higher mobility) resulting from the departure of pendant arms from the resorcarene backbone. Isolation of these species followed by X-ray diffraction studies corroborated this statement. The thermodynamic characterization of metal-ion complexes of Ag+ and Pb2+ in acetonitrile and Cu2+ and Ag+ in methanol is reported. Final conclusions are given.

The interaction of calix[3]thieno[1]pyrrole, 1, and halide and dihydrogen phosphate anions in a variety of solvents (acetonitrile, propylene carbonate, N,N-dimethylformamide, and dimethyl sulfoxide) has been investigated through 1H NMR, conductance measurements, and titration calorimetry. 1H NMR measurements reveal the sites of interaction of the ligand with the anions in CD3CN while the composition of the complex was determined through conductance measurements. A quantitative assessment of anion-ligand interactions is provided. Thus the thermodynamics of complexation of 1 with halide and dihydrogen phosphate anions in dipolar aprotic media at 298.15 K is reported. These data are interpreted in terms of the thermodynamics of transfer of reactants and product from a reference solvent (acetonitrile) to other solvents. The crucial role played by the solvent on the ability of the ligand to interact with anions and on the composition of the complex is demonstrated.

This paper reports thermodynamic data for the transfer of calixarene derivatives and their metal-ion complexes in dipolar aprotic solvents. These data are used to assess the effect of solvation of these compounds on the selective complexation shown by these macrocycles for soft metal cations in different media. Thus, solubilities and derived Gibbs energies of solution of 5,11,17,23-tetra-tert-butyl[25,27-bis(hydroxyl)-26,28-bis(ethylthioethoxy)]calix(4)arene, 1, and 5,11,17,23-tetra-tert-butyl-[25,27-bis(ethylenethanoate)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 2, in various solvents at 298.15 K are reported. Solvation of these ligands in one medium relative to another is analyzed from their standard transfer Gibbs energies using acetonitrile as the reference solvent. These data are combined with transfer enthalpies (derived from standard solution enthalpies obtained calorimetrically) to calculate the corresponding entropies of transfer of these calix(4)arene derivatives from acetonitrile to methanol and N,N-dimethylformamide. As far as the metal-ion salts (silver and mercury) in their free and complex forms are concerned, standard solution enthalpies were determined in acetonitrile, methanol, and N,N-dimethylformamide. These data are used to derive their transfer enthalpies from one medium to another. It is concluded that the extent of complexation of these macrocycles with soft metal cations is controlled by not only the solvation changes that the free cation undergoes in moving from one medium to another but also those for the ligand and its complex cation in these solvents.

A double-cavity calix[4]pyrrole derivative, meso-tetramethyl-tetra[N-(2-phenoxyethyl)-N'-phenylurea]calix[4]pyrrole, 1, with enhanced hosting ability for the fluoride anion has been designed and characterized. Its interaction with anions (fluoride, chloride, bromide, iodide, dihydrogen phosphate, hydrogen sulfate, perchlorate, nitrate, and trifluoromethane sulfonate) was qualitatively and quantitatively assessed through 1H NMR, conductance, and calorimetric studies. The outcome of these investigations demonstrates that 1 interacts only with fluoride and dihydrogen phosphate anions in dipolar aprotic media. However, the composition of these complexes differs in that two units of fluoride are taken per unit of 1, while a 1:1 anion/ligand complex is formed with the dihydrogen phosphate anion. Results from the 1H NMR studies are striking in that these not only provide information about the active sites of the ligand-anion interaction but also allow the establishment of the sequence of events taking place during fluoride complexation. Thus, hydrogen-bond formation between the pyrrolic hydrogen and the fluoride anion is followed by the uptake of a second anion through the same type of interaction, but with the phenyl urea. It is also the latter group that is responsible for the interaction of 1 with the dihydrogen phosphate anion. Finally, this paper illustrates the importance of structural information for the interpretation of the thermodynamics associated with these systems.

The interaction of a calix(4)arene derivative, namely 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[2-(4-pyridyl)methoxy]calix(4)arene, 1a, and its monomeric component, p-tert-butylphenoxy-4-pyridine, 1b, with metal cations has been investigated in acetonitrile and methanol. (1)H NMR measurements carried out in CD(3)CN show the primary role played by the pyridyl nitrogens in their complexation with metal cations. Conductance measurements demonstrated that for all cations (except mercury) the composition of the metal ion complexes of 1a is 1:1 (ligand:metal cation). However, 1a hosts two mercury cations per unit of ligand. For the monomer 1b, complexes of 2:1 (ligand:metal cation) stoichiometries are formed with the exception of Pb(2+) (1:1 composition). The thermodynamics of complexation of these systems are reported in acetonitrile. Data in methanol are limited to stability constant values for mercury(II) and these ligands. This paper demonstrates for the first time that thermodynamic data for the complexation of the monomeric component of the ligand and metal cations contribute significantly to the interpretation of systems involving cation-calixarene interactions in solution.

The solvent control on the ability of a partially substituted lower rim calix(4)arene derivative 5,11,17,23,tetra-tert-butyl[25,27-bis(hydroxy)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 1 to host soft metal cations (Hg(II) and Ag(I)) is demonstrated through 1H NMR, electrochemical (conductance measurements), and thermodynamic characterization of the complexation process in a wide variety of solvents. Solvent-ligand interactions were assessed from 1H NMR measurements involving 1 and various solvents in CDCl3. Thus, the formation of a 1:1 1-CH3CN adduct is reported. As far as metal cations are concerned, depending on the medium their complexation with 1 was only observed for Hg(II) and Ag(I). Thus, in acetonitrile, 1 is more selective for Hg(II) relative to Ag(I) by a factor of 2.2 x 10(3). In methanol the selectivity is reversed to an extent that the affinity of 1 for Ag(I) is 1.4 x 10(3) higher than that for Hg(II). However, 1 is unable to recognize selectively these cations in N,N-dimethylformamide while in propylene carbonate the ability of 1 to interact with these cations is lost. An outstanding feature of thermodynamics emerges when an assessment is made of the ligand effect on the complexation of these cations and analogues calix(4)arene derivatives. Thus, in acetonitrile the thermodynamics of cation complexation by the hydrophilic cavity of a calix(4)arene containing mixed pendant groups is built up from thermodynamic data for the same process involving derivatives with common functionalities at the narrow rim. This is a unique example of the additive contribution of pendant arms in the field of thermodynamics of calixarene chemistry.

The study of adsorptive and chemical immobilization of beta-cyclodextrin on a surface of hydroxylated silicas with various porous structure is described. Using IR spectroscopy, thermal gravimetrical analysis with a programmed heating, and chemical analysis of the silica surface, it is shown that the process of adsorption-desorption of beta-cyclodextrin depends on the porous structure of the silica. The reaction of esterification was used for chemical grafting of beta-cyclodextrin on the surface of hydroxylated silicas. Hydrolytic stability of silicas chemically modified by beta-cyclodextrin apparently is explained by simultaneous formation of chemical and hydrogen bonds between surface silanol groups and hydroxyl groups of beta-cyclodextrin. The uptake of the cations Cu(II), Cd(II), and Pb(II) and the anions Cr(VI) and As(V) by silicas modified with beta-cyclodextrin is investigated as a function of equilibrium ion concentrations. The increase of ion uptake and selectivity of ion extraction in comparison with starting silicas is established. It is due to the formation of surface inclusion complexes of the "host-guest" type in which one molecule of beta-cyclodextrin interacts simultaneously with several ions.

The synthesis of mono-tosyl-beta-cyclodextrin (Ts-beta-CD) and its attachment to the surface of aminopropylsilica are reported. The resulting material was characterized by IR spectroscopy, elemental analysis, and quantitative evaluation of the surface compounds. The maximum amount of beta-cyclodextrin (beta-CD) grafted on the surface of silica was 60% of the computer-calculated value. The uptake of Cu(II), Cd(II), and Pb(II) ions by this modified material as a function of the pH and salt concentration in the aqueous phase was investigated. It is shown that the silica modified with beta-CD has a much greater capacity to uptake these ions than the starting materials. The formation of grafted inclusion compounds of beta-cyclodextrin molecules with polymeric hydroxo complexes of metal cations is demonstrated.