Search

The miniaturization of electronic devices and the structural optimization of power systems put forward a strict size requirement for passive components such as capacitors. The thickness reduction of dielectric polymer films becomes a necessary and urgent measure for future technology development. This advance leads to a higher capacitance density, less raw resource consumption, and lightweight modules and systems. However, the thickness change inevitably challenges the dielectric properties, the surface condition, and their relationship with the fabrication method of the dielectric films. This review primarily discusses: (1) the influence of polymer film thickness on the dielectric properties, (2) film quality issues in thinner polymer films with different filler contents, (3) high-temperature dielectric polymer engineering, and (4) the major processing methods in decreasing polymer film thickness. In addition, the polymer films also require scalability, processibility, and industrial feasibility in film and component manufacturing. The perspective of future investigations and concerns of dielectric polymer films are shared. It is interesting to see the favorable effect of multilayer polymer films on enhancing the dielectric strength.

The importance of surface roughness with respect to the bulk properties of dielectric materials is often overlooked. Surface roughness or interfaces between different material layers often significantly affects the external properties of thin films. Surface roughness holds its commonalty and critical impact among many materials properties. This review summarises the recent work on the effect of surface roughness on the mechanical, thermal, physical, and dielectric properties of dielectric films. Appropriate roughness favours adhesion, filtration, biological fouling, tribological properties, and magnetic properties. Nevertheless, lower roughness generally benefits the dielectric properties of dielectric materials, with thicknesses ranging from a few nanometres to up to 50 μm. This review discusses surface roughness control and the techniques of measurement as well. It emphasises the importance and characterisation of sample surface roughness for a better understanding of the dielectric phenomenon, mechanisms, and electrical stress test setup for various dielectric films.

Designing the mesopore-dominated activated carbon electrodes has witnessed a significant breakthrough in enhancing the electrolyte breakdown voltage and energy density of supercapacitors. Herein, we designed N-doped mesoporous-dominated hierarchical activated carbon (N-dfAC) from the dragon fruit peel, an abundant biomass precursor, under the synergetic effect of KOH as the activating agent and melamine as the dopant. The electrode with the optimum N-doping content (3.4 at. %) exhibits the highest specific capacitance of 427 F g–1 at 5 mA cm–2 and cyclic stability of 123% capacitance retention until 50000 charge–discharge cycles at 500 mA cm–2 in aqueous 6 M KOH electrolytes. We designed a 4 V symmetric coin cell supercapacitor cell, which exhibits a remarkable specific energy and specific power of 112 W h kg–1 and 3214 W kg–1, respectively, in organic electrolytes. The cell also exhibits a significantly higher cycle life (109% capacitance retention) after 5000 GCD cycles at the working voltage of ≥3.5 V than commercial YP-50 AC (∼60% capacitance retention). The larger Debye length of the diffuse ion layer permitted by the mesopores can explain the higher voltage window, and the polar N-doped species in the dfAC enhance capacitance and ion transport. The results endow a new path to design high-capacity and high-working voltage EDLCs from eco-friendly and sustainable biomass materials by properly tuning their pore structures.

Designing high voltage (>3 V) and stable electrochemical supercapacitors with low self‐discharge is desirable for the applications in modern electronic devices. This work demonstrates a 4 V symmetric supercapacitor with stabilized cycling performance through atomic layer deposition (ALD) of alumina (Al2O3) on the surface of activated carbon (AC). The 20‐cycle ALD Al2O3 coated AC delivers 84 % capacitance retention after 1000 charge/discharge cycles under 4 V, contrary to the bare AC cells having only 48 % retention. The extended cycling life is associated with the thickened Stern layer and suppressed oxygen functional group. The self‐discharge data also show that the Al2O3 coating enables AC cells to maintain 53 % of charge retention after 12 h, which is more than twice higher than that of bare AC cells under the same test protocol of 4 V charging. The curve fitting analysis reveals that ALD coating induced slow self‐discharge dominated by ion diffusion mechanism, thus enhancing the AC surface energy., 4 V symmetric supercapacitors are stabilized through optimizing Atomic Layer Deposition of Al2O3 on activated carbon electrodes. The thickened Stern layer and suppressed oxygen functional group extend the cycling life at 4 V. The additional aluminum oxide layer enhances the energy barrier for ion desorption, thereby resulting in a decreased rate of self‐discharge. Too thick oxide coating blocks the nanopores and lower the cycling performance.

In this work, the electromagnetic interference (EMI) shielding properties of an MXene interlayered crosslinked conducting poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) polymer film are investigated. The introduction of a crosslinker into PEDOT:PSS makes PEDOT:PSS water insoluble. An average EMI shielding effectiveness (SE) of ∼41 dB (corresponding to 99.999% blockage) was obtained for a solution coated 6 ± 0.2 μm thick optimized crosslinked PEDOT:PSS-Ti3C2Tx MXene (XPM50) nanocomposite film. Electrodynamic modelling and simulation also suggest an excellent SE for this nanocomposite system. From an application point of view, the specific EMI SE (SSE)/thickness (t) or absolute EMI SE is the most useful factor. The absolute EMI SE of the XPM50 film is observed to be 89 924 dB cm2 g−1, which is nearly nine times higher than that of the pristine PEDOT:PSS film and more than three times higher than that of the Ti3C2Tx MXene film. Mechanistically, the superior EMI shielding due to absorption (SEA) is intrinsically predominant. The crosslinked PEDOT:PSS interconnects with the Ti3C2Tx MXene flakes, generating more absorption sites and enhanced electrical conductivity which is responsible for the high SEA value. The XPM50 film also fulfils many commercial requirements, especially solution processability and outstanding absolute EMI SE, which makes it an attractive EMI shield for real time applications such as telecommunications, health care systems, detective systems, defence, and aerospace applications.

Flexible dielectric polymer composites occupy a significant position in electronic devices. However, many investigations focus on complicated synthetic methods to enhance the energy density of dielectrics. Developing simple and feasible strategy is meaningful and urgent for their acceptance to various applications. Herein, we utilize the high thermal conductivity and electrical insulation characteristic of Boron nitride and Aluminum nitride (BN/AIN) as the hybrid fillers for polyetherimide (PEl) matrix to increase dielectric constant and breakdown strength. This combination resulted in a high discharged energy density of 8.39 J/cm3 at 500 kV/mm with a high efficiency of 90.5% at a low filler fraction. This strategy provides a feasible option for a scalable manufacturing of high performance composite films in the future.

Fabricating electrical double-layer capacitors (EDLCs) with high energy density for various applications has been of great interest in recent years. However, activated carbon (AC) electrodes are restricted to a lower operating voltage because they suffer from instability above a threshold potential window. Thus, they are limited in their energy storage. The deposition of inorganic compounds’ atomic layer deposition (ALD) aiming to enhance cycling performance of supercapacitors and battery electrodes can be applied to the AC electrode materials. Here, we report on the investigation of zinc oxide (ZnO) coating strategy in terms of different pulse times of precursors, ALD cycles, and deposition temperatures to ensure high electrical conductivity and capacitance retention without blocking the micropores of the AC electrode. Crystalline ZnO phase with its optimal forming condition is obtained preferably using a longer precursor pulse time. Supercapacitors comprising AC electrodes coated with 20 cycles of ALD ZnO at 70 °C and operated in TEABF4/acetonitrile organic electrolyte show a specific capacitance of 23.13 F g−1 at 5 mA cm−2 and enhanced capacitance retention at 3.2 V, which well exceeds the normal working voltage of a commercial EDLC product (2.7 V). This work delivers an additional feasible approach of using ZnO ALD modification of AC materials, enhancing and promoting stable EDLC cells under high working voltages.

High voltage electric double layer capacitors with reliable cycling performance are in high demand for energy storage applications. In this research, studies of the process-structure-property relations of commercial activated carbon electrode modified with atomic layer deposition (ALD) have been performed in terms of coating of various oxide compounds. These investigations have yielded similar enhancements of cycling performance at high voltages (3.5 V) enabled by the ALD coating of oxides on activated carbon surfaces. The commonalities are the phenomenal increase in capacitance retention of coin cell supercapacitors after 1,000 charge/discharge cycles regardless of the electric nature of ALD deposited oxides. Minor differences in coating morphologies and uniformities were observed between the aluminum oxide, titanium oxide, and manganese-cobalt oxide. ALD coating of these oxides of about 20-growth cycle (1–2 nm in thickness) was found to effectively result in reliable cycling performance, lower impedance, and significantly low leakage current. The authors proposed a modified Gouy-Chapman-Stern model to explain the remarkable increase in operating voltage and cycling performance by the increased Stern layer thickness due to the ALD oxide coating. These results demonstrate that the ALD oxide coating has excellent potential for activated carbons for high operating voltage and energy density supercapacitor.

MXene, the new family of two-dimensional materials having numerous nanoscale layers, is being considered as a novel microwave absorption material. However, MXene/functionalized MXene-loaded polymer nanocomposites exhibit narrow reflection loss (RL) bandwidth (RL less than or equal to −10 dB). In order to enhance the microwave absorption bandwidth of MXene hybrid-matrix materials, for the first time, macroscopic design approach is carried out for TiO 2 -Ti 3 C 2 T x MXene and Fe 3 O 4 @TiO 2 -Ti 3 C 2 T x MXene hybrids through simulation. The simulated results indicate that use of pyramidal meta structure of MXene can significantly tune the RL bandwidth. For optimized MXene hybrid-matrix materials pyramid pattern, the bandwidth enhances to 3–18 GHz. Experimental RL value well matched with the simulated RL. On the other hand, the optimized Fe 3 O 4 @TiO 2 -Ti 3 C 2 T x hybrid exhibits two specific absorption bandwidths (minimum RL value - −47 dB). Compared with other two-dimensional nanocomposites such as graphene or Fe 3 O 4 -graphene, MXene hybrid-matrix materials show better microwave absorption bandwidth in macroscopic pattern.

The primary strategy to increase dielectric constant and energy storage density is adding a high fraction of fillers with high dielectric constant to polymer matrix. Yet, it has not been very successful without encountering processing difficulties, lowered breakdown strength, and mechanical inflexibility. Herein, we introduce an unconventional approach using ultra-low fraction of zinc oxide core and boron nitride shell (ZnO@BN) filler with very high thermal conductivity dispersed in polyetherimide (PEI) for the same purpose. For the 0.1 vol% core-shelled fillers, the PEI composite film exhibits a superior dischargeable energy density of 10.8 J/cm3 and a high efficiency of 92.1% at an electric field of 500 kV/mm. The polarization responses under high electric fields and simulation reveal the association with the increased interfacial polarization of the thermally conductive core-shelled structure. This strategy lays out a new route to further investigate of high energy density composite and capacitor technologies.

The Cover Feature shows the TEM image of activated carbon surface coated with aluminum oxide using the atomic layer deposition technique. The ultra‐thin oxide coating of 5 nm or less is sufficient to stabilize the cycling performance of activated carbon based electric double layer supercapacitor under 4 V through enhanced barrier against ion diffusion in the electrolyte. More information can be found in the Communication by Dayakar Gandla et al. [Image: see text]

Last two decades has witnessed various technical programs towards the development of new dielectric films for high temperature and high energy density capacitor technology. Yet, the organic polypropylene film still holds its top position for film capacitors required for electric and electronic power applications such as power grid, hybrid electric vehicles, oil and gas exploration, and aviation. However, its low temperature stability determined by its structural nature limits its further adoption for more rising markets. This work thus developed a creative method (ultrathin coating of inorganic compound using atomic layer deposition) to increase the high temperature stability and the dielectric strength of such a strategically important polymer film from below 105 °C to above 140 °C. Several techniques also confirmed the effective minimization of the dimensional change and crystallinity loss at higher temperatures, i.e., Thermomechanical analysis, Dynamic mechanical analysis, Dynamic Scanning calorimetry, x-ray diffraction and electron microscopy techniques. This breakthrough discovery adds a huge value to the commercial PP films and relevant capacitor industry and will extend the operation of high-performance PP film capacitors to various high standard applications.

Designing high voltage, high energy, and activated carbon-based supercapacitors has been a long-time wish for meeting various electronic module requirements. This paper focuses on the approach of synthesizing the hierarchical porous activated carbon with dominant mesopores using eco-friendly green tea waste. The desirable ample pore space achieved by changing the weight ratio of KOH activating agent renders more ionic accessibility and space charge distribution. This feature leads to the achievement of 4 V double layer supercapacitor with a remarkable specific energy of 142 Wh kg−1 and specific power of 3192 W kg−1, respectively using an acetonitrile organic electrolyte. The fabricated cell also exhibits a superior 104% capacitance retention after 25 000 charge-discharge cycles at the working potential of ≥3 V. Besides, the hierarchical porous activated carbon soaked in an aqueous KOH electrolyte shows a high specific capacitance of 397 F g−1 at 5 mA cm−2, high rate capability of 100 mA cm−2, and excellent cycle life of 116% capacitance retention after 50 000 cycles tested at 200 mA cm−2. The larger Debye length of the diffuse ion layer permitted by the mesopores is proposed to explain the higher voltage window as against low voltage of micropore dominated commercial activated carbon. The present research may pave the way toward the design of high-energy supercapacitors through recycling tea waste.

This work focused on the interaction of polar ceramic particles with the hosting polymers to improve the distribution of particles and the dielectric properties of polymer composites. Polymers incorporating polar ceramic particles were shown to exhibit improved dielectric properties. Both computation and experimental observation were conducted to enhance the understanding of composite dielectric engineering. The electric field was found to be localized at the particle- polymer interface, likely contributing to the polarization of polar particles.

Electric field-induced antiferroelectric-ferroelectric phase transition and the associated nonlinear dielectric behavior in particulate composites are investigated for achieving a high dielectric capacity. A phenomenological thermodynamic model based on the Landau theory is first developed to discuss the generic phenomena of a temperature-electric field phase diagram, coexistence of antiferroelectric and ferroelectric phases, field-induced antiferroelectric-ferroelectric phase transition, and nonlinear dielectric behavior. The model is then used to carry out the phase field simulation of particulate nonlinear dielectric composites. It is found that the composites exhibit nonlinear dielectric behaviors, and the depolarization field in the composites helps reduce the dielectric hysteresis and enhance the reversibility of antiferroelectric-ferroelectric phase transitions, which are desired for energy storage applications. The simulations also reveal the underlying domain-level mechanisms for nucleation and growth processes of the phase transitions. It is shown that the macroscopic properties of the composites sensitively depend on the directional alignment of the antiferroelectric filler particles, and thus the filler morphology is an effective control variable in designing nonlinear dielectric composites.

Zinc oxide based metal oxide varistors (MOV) are widely used electrical surge protection components. The design of modern high power, high-density electronic systems necessitate the need for smaller footprint, higher current density and higher nonlinearity MOVs. Such requirements can no longer be satisfied by commercially available MOVs due to their limited voltage capability, high leakage current and mechanical cracking related reliability issues, most of which are associated with the presence of defects and coarse granularity and lack of uniformity in their microstructures. New formulations and processes have been developed to overcome such limitations. This work has developed nano-enabled MOV compositions that can be sintered at relatively lower temperatures than typical commercial MOVs, but with largely improved I-V characteristics due to refined and uniform sub-micron structures. These nano-enabled MOVs show not only high breakdown strength (1.5 kV/mm) with low leakage current, but also a large nonlinear alpha coefficient > 50 at high fields, a measure of the speed of the transition from the insulating to conducting state and the effectiveness of over-voltage protection. A > 10x increase in breakdown strength compared to commercial MOVs, along with much higher nonlinearity, will enable MOV miniaturization, high voltage surge protection, and open up new areas of application.

This paper presents a progress update with the development of nanodielectric composites with electric field tunability for various high energy, high power electrical applications. It is demonstrated that nonlinear electrical/dielectric properties can be achieved via the nanostructure and interface engineering. A high level summary was given on the progress achieved as well as challenges remaining in nanodielectric engineering towards high energy density capacitors for energy storage and conversion, nonlinear dielectrics for tunable device, and high voltage varistor for surge suppression.

This paper presents a progress update with the development of nanostructured dielectric materials for various high energy, high power density electrical applications. It is demonstrated that novel electrical/dielectric properties can be achieved via the nanostructure and interface engineering. We present a high level summary of the progress achieved as well as challenges remaining in nanostructural engineering towards high energy density capacitor for energy storage and conversion, high voltage varistor for surge suppression and high proton conductivity membrane for fuel cell applications.

Commercial metal oxide varistor (MOV) devices provide a combination of high voltage, peak current, pulse energy absorption, and fast response speed. The non-uniformity and defects, however, may lead to relatively low voltage and energy dissipation, high leakage, low reliability and mechanical cracking. GE global research has been studying NanoMOV technology, and has been developing new formulations and processes. New compositions were invented to enable sintering at much lower temperatures, which exhibits improved I-V characteristics and microstructure uniformity. These compositions not only show high resistance at low fields and breakdown voltage (1-5 kV/mm), but also a large alpha at high fields (50-140). The higher breakdown strength (> 10x) compared to commercially available MOVs will enable MOV miniaturization, high voltage surge protection, and open up new areas of usage.

Phase field modeling and computer simulation is employed to study dielectric composites with core-shell filler particles for high-energy-density applications. The model solves electrostatic equations in terms of polarization vector field in reciprocal space using fast Fourier transform technique and parallel computing algorithm. Composites composed of linear constituent phases (matrix, core, and shell materials) of different dielectric constants are considered. Inter-phase boundary conditions are automatically taken into account without explicitly tracking inter-phase interfaces in the composites. The core-shell structures of filler particles are systematically investigated in terms of shell thickness and dielectric constant with respect to core size and matrix dielectric constant, respectively. The effects of filler particle size, shape, and orientation are considered. It is found that core-shell structures of filler particles provide effective means to mitigate local electric field concentration in dielectric composites, improving dielectric breakdown strength and energy density of the composites. Optimal design of core-shell filler particles requires low shell dielectric constant and thick shell coating as compared to core material and core size, respectively.

Phase field modeling and computer simulation is employed to study the relations between filler microstructures and effective properties of dielectric composites. The model solves electrostatic equations in terms of polarization vector field in reciprocal space using a fast Fourier transform technique and parallel computing algorithm. Composites composed of linear constituent phases of different dielectric constants are considered. Interphase boundary conditions are automatically taken into account without explicitly tracking interphase interfaces in the composites. Various factors associated with filler microstructures are systematically investigated, including dielectric constant mismatch between fillers and matrix, particle size, shape, orientation, volume fraction, and spatial arrangement as well as directional alignment. Heterogeneous distributions of polarization, charge density, and local electric field are calculated for each composite microstructure, based on which effective dielectric constant and dielectric anisotropy of the composites are determined. It is found that electrostatic interactions among high-dielectric-constant fillers embedded in low-dielectric-constant matrix play critical roles in determining the composite properties, which sensitively depend on filler arrangement and, especially, directional alignment into fibrous microstructures (chains). Such microstructurally engineered composites, whose fillers are not randomly dispersed, exhibit strong dielectric anisotropy despite all constituent components being isotropic.