Search

One of the oldest oilseed crops is sesame, which is mainly cultivated due to its valuable oleic/linolenic fatty acid ratio. The application of precise irrigation and fertilisation is crucial to ensure the continuity and productivity of sesame production, especially in arid and semi-arid regions. This study aimed to determine the effect of drip irrigation and nitrogen levels on sesame’s oil and fatty acid composition. For this purpose, four nitrogen doses (N0: 0 kg ha−1, N30: 30 kg ha−1, N60: 60 kg ha−1 and N90: 90 kg ha−1) and three different irrigation water levels (I50, I75 and I100, which correspond to 50, 75 and 100% evaporation levels from the evaporation of the Class A pan) were applied. The highest oleic acid content (43.06%) was obtained for the I75N90 treatment. In the case of linoleic fatty acid, the greatest value (43.66%) was for I50N0 treatment. The effects of irrigation and nitrogen doses on oleic acid and linoleic acid content were inverse of each other. An increase in applied irrigation water increased the linoleic acid content. However, it caused a decrease in oleic acid content. Increasing the nitrogen dose increased the oleic acid content and caused a decrease in linoleic acid content. Furthermore, this study showed that the I50N60 treatment (50% Epan and a rate of 60 kg N ha−1) is the most effective for achieving high grain and oil yields in sesame cultivation. The results obtained provide practical guidance for farmers in sesame cultivation.

This study was conducted to determine crop water stress index (CWSI) values and irrigation timing in the case of Derinkuyu dry bean ( Phaseolus vulgaris L.). In 2017, dry beans were grown as the main crop according to the field design consisting of plots divided into randomised blocks. Irrigation treatment comprised full irrigation (I100) and irrigation issues with three different levels of water stress (I66, I33, I0). This study applied 602 mm of water under the I100 irrigation. The yield of Derinkuyu dry beans was equal to 3576.6 kg∙ha –1 in I100 irrigation. The lower limit (LL) value, which is not necessary for the determination of CWSI, was obtained as the canopy–air temperature difference ( Tc – Ta) versus the air vapour pressure deficit ( VPD). The upper limit (UL) value, at which the dry beans were wholly exposed to water stress, was obtained at a constant temperature. The threshold CWSI value at which the grain yield of dry beans started to decrease was determined as 0.33 from the measurements made with an infrared thermometer before irrigation in I66 irrigation treatment. As a result, it can be suggested that irrigation should be applied when the CWSI value is 0.33 in dry beans. Furthermore, the correlation analysis revealed a negative correlation between grain yield and crop water stress index and a positive correlation between yield and chlorophyll content. According to variance analysis, significant relationships were found between the analysed parameters at p ≤ 0.01 and p ≤ 0.05.

This study was conducted to determine the irrigation water demand due to solar radiation in high-tech greenhouses using hydroponic systems in Turkey’s Mediterranean and continental climates, and to determine the annual water consumption and storage capacity with harvested rainwater. Intensive greenhouse cultivation and the recent increase in modern greenhouse cultivation were important factors in selecting the provinces for the study. The chosen provinces were Antalya and Adana, with a Mediterranean climate, and Afyonkarahisar and Kırşehir, with a continental climate. In this research, depending on the production period, the amount of water consumed per unit of area in greenhouses in Antalya, which has a Mediterranean climate, was determined to be 1173.52 L m−2 per yr−1, and in Adana, it was 1109.18 L m−2 per yr−1. In the provinces of Afyonkarahisar and Kırşehir, where a continental climate prevails, water consumption was calculated to be 1479.11 L m−2 per yr−1 and 1370.77 L m−2 per yr−1, respectively. Storage volumes for the provinces of Antalya, Adana, Afyonkarahisar and Kırşehir were found to be 438.39 L m−2, 122.71 L m−2, 42.12 L m−2 and 43.65 L m−2, respectively. For the provinces of Antalya, Adana, Afyonkarahisar and Kırşehir, the rates of rainwater harvesting and meeting plants’ water consumption were calculated to be 80.79%, 54.27%, 27.47% and 25.16%, respectively. In addition, the amount of water fee savings that could be achieved by rainwater harvesting was calculated to be USD 901.3 per yr−1 for Antalya, USD 835.3 per yr−1 for Adana, USD 247.6 per yr−1 for Afyonkarahisar and USD 210.2 per yr−1 for Kırşehir. As a result, rainwater harvesting will not only provide economic gain to enterprises but will also be important in reducing the negative effects of irregular rainfall regimes caused by climate change on underground and surface water resources. It was also concluded that enterprises should focus on popularizing rainwater harvesting.

This study aimed to evaluate the effects of high temperature and low humidity on the crop water stress index (CWSI) of seed pumpkin plants grown under semi-arid climate conditions to determine the optimum irrigation time. This research unveils the critical impact of high temperature and low humidity on seed pumpkin growth, emphasizing the vital role of the CWSI in optimizing irrigation strategies and seed yield. Moreover, the relationship between CWSI, physiological parameters, and seed yield of the pumpkin was investigated. The mean CWSI values in the I70 (0.40) and I35 (0.56) treatments were 42% and 100% higher, respectively than those in the full irrigation (I100) treatment (0.28). While the I70 treatment showed manageable water stress with minimal impact, the I35 treatment experienced severe stress, significantly reducing crop growth and yield. The mean seed yield (SY) in the I70 treatment increased to 1245.2 kg ha–1 compared to I35 (903.3 kg ha–1) but remained lower than I100 (1339.3 kg ha–1). The CWSI had negative correlations (p ≤ 0.01) with seed yield, chlorophyll content, and leaf area index, while it had positive correlations with water use efficiency and irrigation water use efficiency (p ≤ 0.01). This study showed that pumpkins could be grown successfully at 30% water deficit conditions, and a water deficit higher than 30% may cause a significant seed yield loss in semi-arid climate conditions. In addition, the results highlight the importance of optimal irrigation and CWSI monitoring for informed irrigation decisions and sustainable agricultural practices. Therefore, moderate water deficit (I70) can be adopted in pumpkin cultivation as an alternative to full irrigation.

An experiment was conducted to determine the effect of water stress on yield and various physiological parameters, including the crop water stress index for tomatoes in the Central Anatolian region of Turkey. For this purpose, the irrigation schedule used in this study includes 120%, 100%, 80%, and 60% (I120, I100, I80, I60) of evaporation from the gravimetrically. Water deficit was found to cause a stress effect in tomato plants, which was reflected in changes in plants’ morphological and pomological function (such as stem diameter, fruit weight, pH, titratable acidity, and total soluble solids). Irrigation levels had a significant effect on the total yield of tomatoes. The lowest water use efficiency (WUE) was obtained from the I60, while the highest WUE was found in the I100 irrigation level. The CWSI was calculated using an empirical approach from measurements of infrared canopy temperatures, ambient air temperatures, and vapor pressure deficit values for four irrigation levels. The crop water stress index (CWSI) values ranged from −0.63 to a maximum value of 0.53 in I120, from −0.27 to 0.63 in I100, from 0.06 to 0.80 in I80, and from 0.37 to 0.97 in I60. There was a significant relation between yield and CWSI. The yield was correlated with mean CWSI values, and the linear equation Total yield = −2398.9CWSI + 1240.4 can be used for yield prediction. The results revealed that the CWSI value was useful for evaluating crop water stress in tomatoes and predicting yield.

Current river assessment methods focus on evaluating a single aspect (e.g. the physical and chemical quality of the water or its hydromorphological state) and usually do not integrate various factors. The lack of an interdisciplinary method makes it difficult to correctly assess the condition of a river as a complex ecosystem significantly influenced by humans. This study aimed to develop a novel Comprehensive Assessment of Lowland Rivers (CALR) method. It is designed to integrate and evaluate all-natural and anthropopressure-related elements that influence a river. The CALR method was developed using the Analytic Hierarchy Process (AHP). The application of the AHP allowed the assessment factors to be determined and given weights to define the importance of each assessment element. As a result of AHP analyses, the following ranks were determined for the six main parts of the CALR method: hydrodynamic assessment (0.212), hydromorphological assessment (0.194), macrophyte assessment (0.192), water quality assessment (0.171), hydrological assessment (0.152) hydrotechnical structures assessment (0.081). In the comprehensive assessment of lowland rivers, each of the six elements listed above is rated on a scale of 1–5 (where 5 means very good and 1 bad) and multiplied by an appropriate weighting. After summing up the obtained results, a final value is obtained, classifying the river. CALR can be successfully applied to all lowland rivers thanks to its relatively simple methodology. The widespread use of the CALR method may facilitate the assessment process and enable the comparison of the condition of lowland rivers worldwide. The research conducted in this article is one of the first attempts to develop a comprehensive method for evaluating rivers that considers all aspects.

This research aimed to analyze the potential amount of electrical energy from biogas energy obtained from animal wastes in Turkey and Poland. Animal waste values were calculated by taking into account the recommended literature values. In determining the biomass energy potential of livestock enterprises in Turkey and Poland, FAO’s 2012–2021 data were taken into account. The animal breeds selected as material in this study were cattle, goat, sheep, chicken, duck, goose, turkey, horse, pig, mule and donkey. Considering 10-year calculations, the potential amount of biogas energy that can be obtained from animal wastes for Turkey is 28,845,975 GJ, which is equivalent to 8,105,058 MWh of electrical energy. In Poland, the potential amount of biogas energy that can be generated from animal waste is 13,999,612 GJ, which is equivalent to 3,902,020 MWh of electricity. Moreover, it is estimated that the percentage of the potential amount of electricity to be obtained in 2021 to cover the amount of electricity consumed is 0.303% for Turkey and 0.392% for Poland. For 2021, the amount of economic gains that can be from electricity obtained was also calculated, and it was determined that this value can be 78,650,302 Euro for Turkey and 62,182,435 Euro for Poland. At the same time, it was calculated that the electricity needs of 406,170 houses in Turkey and 171,958 houses in Poland can be met in 2021. As a result, it is thought that the potential electricity to be obtained will contribute to determining energy gains and investment plans for biogas plants.

In order to reduce the impact of outdoor extreme weather events on crop production in winter, energy saving in greenhouses that are regularly heated is of great importance in reducing production costs and carbon footprints. For this purpose, the variations in indoor temperature, relative humidity and dew point temperature in the vertical direction (2 m, 4 m, 5.7 m) of thermal curtains in greenhouses were determined. In addition, depending on the fuel used, the curtains’ effects on heat energy consumption, heat transfer coefficient, carbon dioxide equivalents released to the atmosphere and fuel cost were investigated. To reach this goal, two greenhouses with the same structural features were designed with and without thermal curtains. As a result of the study, the indoor temperature and relative humidity values in the greenhouse with a thermal curtain increased by 1.3 °C and 10% compared to the greenhouse without a thermal curtain. Thermal curtains in the greenhouse significantly reduced fuel use (59.14–74.11 m3·night−1). Considering the heat energy consumption, the average heat energy consumption was 453.7 kWh·night−1 in the greenhouse with a curtain, while it was 568.6 kWh·night−1 in the greenhouse without a curtain. The average heat transfer coefficient (U) values were calculated at 2.87 W·m−2 °C with a thermal curtain and 3.63 W·m−2 °C without a thermal curtain greenhouse. In the greenhouse, closing the thermal curtain at night resulted in heat energy savings of about 21%, related to the decrease in U values. The use of a thermal curtain in the greenhouse reduced the amount of CO2 released to the atmosphere (116.6–146.1 kg·night−1) and fuel cost (USD 21.3–26.7·night−1). To conclude, extreme weather events in the outdoor environment adversely affect the plants grown in greenhouses where cultivation is performed out of season. A thermal curtain, used to reduce these adverse effects and the amount of energy consumed, is essential in improving indoor climate conditions, providing more economical greenhouse management and reducing the CO2 released into the atmosphere due to fuel use.

Rainfall expected to occur in a given period is defined as dependable rainfall. The increasing pressure on freshwater resources necessitates efficient water use in the agricultural sector, where water is used the most globally. Therefore, dependable rainfall values in dry (80%), normal (50%) and wet (20%) periods, which are used in the planning and operation stages of irrigation networks, can be determined by analysis. In this study, the change in the irrigation water requirement of apple trees was investigated based on the dependable rainfall of Warsaw and Isparta, two important apple production regions of Poland and Turkey. For this purpose, dependable rainfall values in both locations between 1984 and 2021 were calculated monthly and annually with the Rainbow program. Then, using the climate parameters of the relevant years, plant water consumption and irrigation water requirements were calculated with the help of Cropwat software. As a result of the research, rainfall values expected to occur in the dry, normal and rainy years in Warsaw are 466 mm, 532 mm and 604 mm, respectively, while, in Isparta, these values are 422 mm, 520 mm and 602 mm, respectively. Crop water requirements calculated based on dependable rainfall are 363 mm, 237 mm and 108 mm in Warsaw during the dry, normal and wet periods, while these values are 452 mm, 367 mm and 277 mm, respectively, in Isparta. The application of appropriate irrigation rates that take into account water requirements will optimize the use of water resources and also improve apple yields. This is extremely important for these research areas in particular, as Turkey and Poland are among the largest apple producers in the world.

Willows are one of the plants which can be used to produce biomass for energy purposes. Biomass production is classified as a renewable energy source. Increasing the share of renewable sources is one of the priority actions for European Union countries due to the need to reduce greenhouse gas emissions. To achieve the best possible growth of the willow and increase its biomass for fuel, it is crucial to provide optimal water conditions for its growth. The aim of the study was to determine the water requirements of willows under the conditions of the western Polish climate and to verify whether this area is potentially favourable for willow cultivation. The novelty of this paper lies in its multi-year climatic analysis in the context of willow water needs for the area of three voivodships: Lubusz, Lower Silesian, and West Pomeranian. This is one of the few willow water-needs analyses for this region which considers the potential for widespread willow cultivation and biomass production in western Poland. Reference evapotranspiration (ETo) was determined by the Blaney-Criddle equation and then, using plant coefficients, water needs for willow were determined. Calculations were carried out for the growing season lasting from 21 May to 31 October. The estimated water needs during the vegetation season amounted on average to 408 mm for the West Pomeranian Voivodeship, 405 mm for the Lubusz Voivodeship, and 402 mm for the Lower Silesian Voivodeship. The conducted analysis of variance (ANOVA) showed that these needs do not differ significantly between the voivodeships. Therefore, it can be concluded that the water requirements of willows in western Poland do not differ significantly, and the whole region shows similar water conditions for willow cultivation. Furthermore, it was found that water needs are increasing from decade to decade, making rational water management necessary. This is particularly important in countries with limited water resources, such as Poland. Correctly determining the water requirements of willow and applying them to the cultivation of this plant should increase the biomass obtained. With appropriate management, willow cultivation in Poland can provide an alternative energy source to coal.

Increasing water demand, combined with unfavourable climate change, creates a need for well-thought-out water management. Such goals are realised thanks to appropriate hydrotechnical infrastructure, the efficiency and functionality of which depend on its technical condition. In the literature, there is no method for the assessment of the technical condition of small damming structures, including sluice gates. The aim of this article was to present the possibility of using the multi-criteria AHP decision support method to assess the technical condition of small damming structures. The assessment included both concrete elements (spillways, abutments, and apron) and steel elements (gates and hoisting equipment). The analyses considered the effects of growing vegetation, the condition of concrete surfaces (e.g., cracks, cavities, exposed rebar) and steel elements (corrosion, deterioration). A hybrid method was used to study the assessment of the technical condition of water structures. It consisted of a modified Zawadzki’s method and weights which were determined by different groups of respondents with industry backgrounds (university students and experts) using the AHP method. The obtained results show that the factors related to the holes and corrosion of the gate elements had the highest value of the matrix solution vector. The last level of the tree structure indicated that the condition of the spillway and gate is the most important factor in the technical condition assessment. As the assessment considers commonly available parameters, the proposed method is universal and can be used in the assessment of other structures of this type in different regions of the world, which is important in terms of their functioning, planned repairs, and optimal use in water resource management.

Giant miscanthus is a vigorously growing energy plant, popularly used for biofuels production. It is a grass with low soil and water requirements, although its productivity largely depends on complementary irrigation, especially in the first year of cultivation. The aim of the study was to assess the impact of the forecast climate changes, mainly air temperature increase, on the water needs of giant miscanthus during the growing season in 2021–2050 in the Kuyavia region (central Poland). The years 1981–2010 as the reference period were applied. The meteorological data was based on the regional climate change model RM5.1 with boundary conditions from the global ARPEGE model for the SRES A1B emission scenario. Crop evapotranspiration, calculated using the Penman-Monteith method and crop coefficients, was assumed as a measure of water needs. The study results showed that in view of the expected temperature changes, in the forecast period 2021–2050, the giant miscanthus water needs will increase by 10%. The highest monthly increase may occur in August (16%) and in September (23%). In the near future, the increase in water needs of giant miscanthus will necessitate the use of supplementary irrigation. Hence the results of this study may contribute to increasing the efficiency of water use, and thus to the rational management of irrigation treatments and plant energy resources in the Kuyavia region.

This review presents the main findings from measurements carried out on cereals using chitosan, its derivatives, and nanoparticles. Research into the use of chitosan in agriculture is growing in popularity. Since 2000, 188 original scientific articles indexed in Web of Science, Scopus, and Google Scholar databases have been published on this topic. These have focused mainly on wheat (34.3%), maize (26.3%), and rice (24.2%). It was shown that research on other cereals such as millets and sorghum is scarce and should be expanded to better understand the impact of chitosan use. This review demonstrates that this chitosan is highly effective against the most dangerous diseases and pathogens for cereals. Furthermore, it also contributes to improving yield and chlorophyll content, as well as some plant growth parameters. Additionally, it induces excellent resistance to drought, salt, and low temperature stress and reduces their negative impact on cereals. However, further studies are needed to demonstrate the full field efficacy of chitosan.

Most species of Cucurbitaceae respond favorably to irrigation, especially when combined with fertilizers. The effect of drip irrigation combined with nitrogen fertigation in melon grown on a very light soil in Central Poland, during 2013–2015, was evaluated. The field experimental design was a split-plot with four replications. Two factors were studied: (1) irrigation treatments applied in two combinations—drip irrigation + broadcast nitrogen fertilization (control), and drip irrigation + fertigation with nitrogen; (2) two cultivars—Melba and Seledyn. The total marketable yield of fruits, weight of a single fruit, and the concentration of dry matter, total sugars, monosaccharides, ascorbic acid, total carotenoids, and polyphenols were evaluated. Tested factors presented a significant effect both on the yield and nutritive value characteristics. Drip irrigation combined with nitrogen fertigation, comparing to the control, notably improved yields and nutritional value of fruits. Seledyn produced better yields than Melba. This study shows that on very light soil, with low water and nutrient retention capacity, melon should be drip-irrigated and nitrogen-fertigated to obtain the best cultivation results.

The aim of this study was to verify the response of 13 American asparagus cultivars cultivated for green spear on surface postharvest drip irrigation. Irrigation, used to compensate for periodic deficiencies in precipitation, allows for high- and good-quality crops for many species. The field experiment was carried out in 2006–2008 on a very light sandy soil in central Europe (Poland). Irrigation treatments were applied using the tensiometer indications. Water requirements of asparagus were calculated on the base of reference evapotranspiration and crop coefficients. The following evaluations were made: Height, diameter, and number of summer stalks, as well marketable yield, weight, and number of consumption green spears. Drip irrigation applied for 2 years (2006–2007) in the postharvest period had a positive effect on all studied traits in both summer stalks and green spears in 2007–2008. A significant increase in the height, number, and diameter of summer stalks, as well an increase in the marketable yield, weight, and number of green spears was observed for most of the cultivars. In general, postharvest drip irrigation of asparagus cultivated in very light sandy soil significantly contributes to the increase in productivity of American cultivars of this species.

Climate warming increases the water needs of plants. The aim of this study was to estimate the water needs of grapevines in central Poland. Water needs were calculated using the crop coefficients method. Reference evapotranspiration was assessed by the Blaney–Criddle’s equation, modified for climate conditions in Poland. Crop coefficients were assumed according to the Doorenbos and Pruitt method. Water needs were calculated using the data from four meteorological stations. Rainfall deficit with the probability occurrence of normal years, medium dry years, and very dry years was determined by the Ostromęcki’s method. Water needs of grapevines during the average growing season were estimated at 438 mm. Upward time trend in the water needs both in the period of May–October and June–August was estimated. Temporal variability in the water needs was significant for all of the provinces. These changes were mainly impacted by a significant increasing tendency in mean air temperature and less by precipitation totals that did not show a clear changing tendency. Due to climate change, vineyards will require irrigation in the near future. The use of resource-efficient irrigation requires a precise estimate of the grapevines’ water needs. The study identified the water requirements for grapevines in central Poland.

Control drainage (CD) is a common practice implemented to control the water balance of drainage fields by increasing the amount of water retained in soil. Worldwide studies suggest that climate change can reduce the effectiveness of CD solutions, but no study of CD effects has been carried out in Polish conditions yet. In this study, the DRAINMOD (Wayne Skaggs, North Carolina State University, Raleigh, USA) computer simulation model was used to predict the effects of CD on the time horizons of 2021–2050 (near future) and 2071–2100 (far future) assuming the Representative Concentration Pathway (RCP) 4.5 emission scenario. The effectiveness of CD solutions is presented for a drainage network with spacing of 7 or 14 m. Additionally, different dates of blocking the outflow from the drainage network (1st and 15th of March and 1st and 15th of April) and different initial groundwater table conditions (0.4, 0.6, and 0.8 m) were assumed. All simulations for different variants were carried out for the same period, i.e., from 1st of March to 30th of September. The results of climate models indicated that in the area of central-western Poland in the near and far future there will be an increase in air temperatures by 1.02 and 1.97 °C, respectively, and in precipitation by 5.98% and 10.15%, respectively. In addition, there will be a change in the structure of precipitation, especially with respect to the extension of rain-free periods and an increase in the amount of extreme daily precipitation. The effect of climate change will be a decrease in the mean groundwater table in the fields equipped with drainage systems from 2 to 5 cm. In addition, the number of days on which groundwater table will be above the level of the drainage network will decrease. For the drainage network with spacing of 7 m, the time of the groundwater table above the level of the drainage network will decrease by 5 and 7 days in the near and far future, respectively, while for the drainage network with spacing of 14 m, it will decrease by 4 and 7 days. Climate change will also reduce sub-surface outflow. Subsurface outflows will be smaller than those currently recorded on average by 11% and 17% and 12% and 18% for 7 m and 14 m spacing drainage networks, in the near and far future, respectively. The increase in rainfall intensity in the near and far future will result in a fivefold increase in surface outflow in comparison to the present situation. The simulations show that the greatest effectiveness of CD solutions will be achieved by starting the blocking of outflow from the drainage network on the 1st of March. The implementation of CD solutions since April in the near and far future will allow maintaining the groundwater table at the level presently observed for the conventional network (free drainage-FD).

Copyright of Ecological Engineering / Inżynieria Ekologiczna is the property of Polish Society of Ecological Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)