Search

International audience; PFS (Prime Focus Spectrograph), a next generation facility instrument on the Subaru telescope, is now being tested on the telescope. The instrument is equipped with very wide (1.3 degrees in diameter) field of view on the Subaru's prime focus, high multiplexity by 2394 reconfigurable fibers, and wide waveband spectrograph that covers from 380nm to 1260nm simultaneously in one exposure. Currently engineering observations are ongoing with Prime Focus Instrument (PFI), Metrology Camera System (MCS), the first spectrpgraph module (SM1) with visible cameras and the first fiber cable providing optical link between PFI and SM1. Among the rest of the hardware, the second fiber cable has been already installed on the telescope and in the dome building since April 2022, and the two others were also delivered in June 2022. The integration and test of next SMs including near-infrared cameras are ongoing for timely deliveries. The progress in the software development is also worth noting. The instrument control software delivered with the subsystems is being well integrated with its system-level layer, the telescope system, observation planning software and associated databases. The data reduction pipelines are also rapidly progressing especially since sky spectra started being taken in early 2021 using Subaru Nigh Sky Spectrograph (SuNSS), and more recently using PFI during the engineering observations. In parallel to these instrumentation activities, the PFS science team in the collaboration is timely formulating a plan of large-sky survey observation to be proposed and conducted as a Subaru Strategic Program (SSP) from 2024. In this article, we report these recent progresses, ongoing developments and future perspectives of the PFS instrumentation.

Cometary activity is a manifestation of sublimation-driven processes at the surface of nuclei. However, cometary outbursts may arise from other processes that are not necessarily driven by volatiles. In order to fully understand nuclear surfaces and their evolution, we must identify the causes of cometary outbursts. In that context, we present a study of mini-outbursts of comet 46P/Wirtanen. Six events are found in our long-term lightcurve of the comet around its perihelion passage in 2018. The apparent strengths range from $-0.2$ to $-1.6$ mag in a 5" radius aperture, and correspond to dust masses between $\sim10^4$ to $10^6$ kg, but with large uncertainties due to the unknown grain size distributions. However, the nominal mass estimates are the same order of magnitude as the mini-outbursts at comet 9P/Tempel 1 and 67P/Churyumov-Gerasimenko, events which were notably lacking at comet 103P/Hartley 2. We compare the frequency of outbursts at the four comets, and suggest that the surface of 46P has large-scale ($\sim$10-100 m) roughness that is intermediate to that of 67P and 103P, if not similar to the latter. The strength of the outbursts appear to be correlated with time since the last event, but a physical interpretation with respect to solar insolation is lacking. We also examine Hubble Space Telescope images taken about 2 days following a near-perihelion outburst. No evidence for macroscopic ejecta was found in the image, with a limiting radius of about 2-m., Comment: Accepted for publication in The Planetary Science Journal. 33 pages, 11 figures, 3 tables

PFS (Prime Focus Spectrograph), a next generation facility instrument on the Subaru telescope, is a very wide- field, massively multiplexed, and optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed in the 1.3 degree-diameter field of view. The spectrograph system has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously deliver spectra from 380nm to 1260nm in one exposure. The instrumentation has been conducted by the international collaboration managed by the project office hosted by Kavli IPMU. The team is actively integrating and testing the hardware and software of the subsystems some of which such as Metrology Camera System, the first Spectrograph Module, and the first on-telescope fiber cable have been delivered to the Subaru telescope observatory at the summit of Maunakea since 2018. The development is progressing in order to start on-sky engineering observation in 2021, and science operation in 2023. In parallel, the collaboration is trying to timely develop a plan of large-sky survey observation to be proposed and conducted in the framework of Subaru Strategic Program (SSP). This article gives an overview of the recent progress, current status and future perspectives of the instrumentation and scientific operation.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10 µ m. The metrology camera system (MCS) serves as the optical encoder of the fiber positioners for configuring of fibers. The MCS locates at the Cassegrain focus of the Subaru telescope to cover the whole focal plane with one 50M pixel CMOS sensor. The information from MCS will be fed into the fiber positioner control system for closed loop control. The MCS was delivered to Subaru Observatory in Apr. 2018 and it had two engineering runs in Oct. 2018 and Aug. 2019. The 1st engineering run concluded that the original mirror supports need to be improved to provide better image quality. The newly designed mirror supports were installed before the 2nd engineering run. The 2nd engineering run result shows that the MCS overall position accuracy is better than 4μm and the image processing time is less than 4 seconds. The MCS is ready for the system integration with other PFS components.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degrees diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners and fiducial fibers are located. In addition, the acquisition and guiding cameras (AGCs), the cable wrapper, the fiducial fiber illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC’s Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. The delivery of PFI components started in 2017. After the verification of these components, the mechanical structure of the PFI is fully assembled in early 2019 and all Cobra positioners are integrated in summer 2020. A temperature controlled chamber with precise x-y scanner was setup for the verification of the fiber positioners. The testing of the target convergence performance of Cobra positioners is now in progress.

We report the first plausible optical electromagnetic (EM) counterpart to a (candidate) binary black hole (BBH) merger. Detected by the Zwicky Transient Facility (ZTF), the EM flare is consistent with expectations for a kicked BBH merger in the accretion disk of an active galactic nucleus (AGN), and is unlikely ($, Comment: 9 pages, 4 figures, accepted for publication in Physical Review Letters (June 25, 2020)

The discovery rate of fast radio bursts (FRBs) is increasing dramatically thanks to new radio facilities. Meanwhile, wide-field instruments such as the 47 deg$^2$ Zwicky Transient Facility (ZTF) survey the optical sky to study transient and variable sources. We present serendipitous ZTF observations of the CHIME repeating source FRB 180916.J0158+65, that was localized to a spiral galaxy 149 Mpc away and is the first FRB suggesting periodic modulation in its activity. While 147 ZTF exposures corresponded to expected high-activity periods of this FRB, no single ZTF exposure was at the same time as a CHIME detection. No $>3\sigma$ optical source was found at the FRB location in 683 ZTF exposures, totalling 5.69 hours of integration time. We combined ZTF upper limits and expected repetitions from FRB 180916.J0158+65 in a statistical framework using a Weibull distribution, agnostic of periodic modulation priors. The analysis yielded a constraint on the ratio between the optical and radio fluences of $\eta \lesssim 200$, corresponding to an optical energy $E_{\rm opt} \lesssim 3 \times 10^{46}$ erg for a fiducial 10 Jy ms FRB (90% confidence). A deeper (but less statistically robust) constraint of $\eta \lesssim 3$ can be placed assuming a rate of $r(>5$ Jy ms)= hr$^{-1}$ and $1.2\pm 1.1$ FRB occurring during exposures taken in high-activity windows. The constraint can be improved with shorter per-image exposures and longer integration time, or observing FRBs at higher Galactic latitudes. This work demonstrated how current surveys can statistically constrain multi-wavelength counterparts to FRBs even without deliberately scheduled simultaneous radio observation., Comment: Accepted for publication in ApJL, 9 pages, 4 figures, 1 table

The Zwicky Transient Facility (ZTF) Observing System (OS) is the data collector for the ZTF project to study astrophysical phenomena in the time domain. ZTF OS is based upon the 48-inch aperture Schmidt-type design Samuel Oschin Telescope at the Palomar Observatory in Southern California. It incorporates new telescope aspheric corrector optics, dome and telescope drives, a large-format exposure shutter, a flat-field illumination system, a robotic bandpass filter exchanger, and the key element: a new 47-square-degree, 600 megapixel cryogenic CCD mosaic science camera, along with supporting equipment. The OS collects and delivers digitized survey data to the ZTF Data System (DS). Here, we describe the ZTF OS design, optical implementation, delivered image quality, detector performance, and robotic survey efficiency., 31 pages, 26 figures, 5 tables; published in the Publications of the Astronomical Society of the Pacific

Near-Earth Objects (NEOs) that orbit the Sun on or within Earth's orbit are tricky to detect for Earth-based observers due to their proximity to the Sun in the sky. These small bodies hold clues to the dynamical history of the inner solar system as well as the physical evolution of planetesimals in extreme environments. Populations in this region include the Atira and Vatira asteroids, as well as Venus and Earth co-orbital asteroids. Here we present a twilight search for these small bodies, conducted using the 1.2-m Oschin Schmidt and the Zwicky Transient Facility (ZTF) camera at Palomar Observatory. The ZTF twilight survey operates at solar elongations down to $35^\circ$ with limiting magnitude of $r=19.5$. During a total of 40 evening sessions and 62 morning sessions conducted between 2018 November 15 and 2019 June 23, we detected 6 Atiras, including 2 new discoveries 2019 AQ$_3$ and 2019 LF$_6$, but no Vatiras or Earth/Venus co-orbital asteroids. NEO population models show that these new discoveries are likely only the tip of the iceberg, with the bulk of the population yet to be found. The population models also suggest that we have only detected 5--$7\%$ of the $H, AJ accepted

Context: Type Ibn supernovae are a rare class of stripped envelope supernovae interacting with a helium-rich CSM. The majority of the SNe Ibn reported display a surprising homogeneity in their fast lightcurves and starforming hosts. Aims: We present the discovery and study of SN 2020bqj (ZTF20aalrqbu), a SN Ibn with a long-duration peak plateau lasting 40 days and hosted by a faint low-mass galaxy. We aim to explain its peculiar properties using an extensive data set. Methods: We compare the evolution of SN 2020bqj with SNe Ibn from the literature. We fit the bolometric and multi-band lightcurves with different powering mechanism models. Results: The risetime, peak magnitude and spectral features of SN 2020bqj are consistent with those of most SNe Ibn, but the SN is a clear outlier based on its bright, long-lasting peak plateau and low host mass. We show through modeling that the lightcurve can be powered predominantly by shock heating from the interaction of the SN ejecta and a dense CSM. The peculiar Type Ibn SN 2011hw is a close analog to SN 2020bqj, suggesting a similar progenitor and CSM scenario. In this scenario a very massive progenitor star in the transitional phase between a luminous blue variable and a compact Wolf-Rayet star undergoes core-collapse, embedded in a dense helium-rich CSM with an elevated opacity compared to normal SNe Ibn, due to the presence of residual hydrogen. This scenario is consistent with the observed properties of SN 2020bqj and the modeling results. Conclusions: SN 2020bqj is a compelling example of a transitional SN Ibn/IIn based on not only its spectral features, but also its lightcurve, host galaxy properties and the inferred progenitor properties. The strong similarity with SN 2011hw suggests this subclass may be the result of a progenitor in a stellar evolution phase that is distinct from those of progenitors of regular SNe Ibn., Comment: 22 pages, 14 figures, 5 tables. Accepted for publication in Astronomy & Astrophysics. Abstract abridged for arXiv submission

Helium is expected to be present in the ejecta of some hydrogen-poor superluminous supernovae (SLSN-I). However, so far only one event, PTF10hgi has been identified with He features in its photospheric spectra (Quimby et al. 2018). We present the discovery of a new He-rich SLSN-I, ZTF19aawfbtg (SN2019hge) at $z=0.0866$. This event has more than 10 optical spectra at phases from $-41$ to $+103$\,days relative to the peak, most of which match well with that of PTF10hgi. Confirmation comes from a near-IR spectrum taken at $+34$ days, revealing He I features with P-Cygni profiles at 1.083 and 2.058$\mu$m. Using the optical spectra of PTF10hgi and SN2019hge as templates, we examine 70 SLSN-I discovered by ZTF in the first two years of operation and found additional five SLSN-I with distinct He-features. The excitation of He\,I atoms in normal core collapse supernovae requires non-thermal radiation, as proposed by previous studies. These He-rich events can not be explained by traditional $^{56}$Ni mixing model because of their blue spectra, high peak luminosity and slow rising time scales. Magnetar models offer a possible solution since pulsar winds naturally generate high energy particles as sources of non-thermal excitation. An alternative model is ejecta interaction with H-poor CSM which may be supported by the observed light curve undulations. These six SLSN-Ib appear to have relatively low-peak luminosities (rest-frame $M_g = -20.06\pm0.16$ mag)., Comment: 12 pages, 6 figures, Accepted for publication in ApJL. Matched with the published version

Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread function. However, while FRD is a function of many fiber properties such as stresses, microbending, and surface imperfections, angular misalignments between the incoming light and the face of the fiber also affect the light profile and complicate this measurement. A compact experimental setup and a model separating FRD from angular misalignment was applied to a fiber subjected to varying stresses or angular misalignments to determine the magnitude of these effects. The FRD was then determined for a fiber in a fiber positioner that will be used in the Subaru Prime Focus Spectrograph (PFS). The analysis we carried out for the PFS positioner suggests that effects of angular misalignment dominate and no significant FRD increase due to stress should occur., 18 pages, 16 figures

The Zwicky Transient Facility (ZTF), a public-private enterprise, is a new time domain survey employing a dedicated camera on the Palomar 48-inch Schmidt telescope with a 47 deg$^2$ field of view and 8 second readout time. It is well positioned in the development of time domain astronomy, offering operations at 10% of the scale and style of the Large Synoptic Survey Telescope (LSST) with a single 1-m class survey telescope. The public surveys will cover the observable northern sky every three nights in g and r filters and the visible Galactic plane every night in g and r. Alerts generated by these surveys are sent in real time to brokers. A consortium of universities which provided funding ("partnership") are undertaking several boutique surveys. The combination of these surveys producing one million alerts per night allows for exploration of transient and variable astrophysical phenomena brighter than r $\sim$ 20.5 on timescales of minutes to years. We describe the primary science objectives driving ZTF including the physics of supernovae and relativistic explosions, multi-messenger astrophysics, supernova cosmology, active galactic nuclei and tidal disruption events, stellar variability, and Solar System objects., Comment: 26 pages, 7 figures, Published in PASP Focus Issue on the Zwicky Transient Facility

We present ZTF18aaqjovh (SN 2018bvw), a high-velocity ("broad-lined") stripped-envelope (Type Ic) supernova (Ic-BL SN) discovered in the Zwicky Transient Facility one-day cadence survey. ZTF18aaqjovh shares a number of features in common with engine-driven explosions: the photospheric velocity and the shape of the optical light curve are very similar to that of the Type Ic-BL SN 1998bw, which was associated with a low-luminosity gamma-ray burst (LLGRB) and had relativistic ejecta. However, the radio luminosity of ZTF18aaqjovh is almost two orders of magnitude fainter than that of SN 1998bw at the same velocity phase, and the shock velocity is at most mildly relativistic (v=0.06-0.4c). A search of high-energy catalogs reveals no compelling GRB counterpart to ZTF18aaqjovh, and the limit on the prompt GRB luminosity of $L_{\gamma,\mathrm{iso}} \approx 1.6 \times 10^{48}$ erg/sec excludes a classical GRB but not an LLGRB. Altogether, ZTF18aaqjovh represents another transition event between engine-driven SNe associated with GRBs and "ordinary" Ic-BL SNe., Comment: 18 pages, 8 figures. Accepted to the Astrophysical Journal on 2 March 2020. Revised from proofs on 4 Apr 2020

Full list of authors: Horesh, Assaf; Sfaradi, Itai; Ergon, Mattias; Barbarino, Cristina; Sollerman, Jesper; Moldon, Javier; Dobie, Dougal; Schulze, Steve; Pérez-Torres, Miguel; Williams, David R. A.; Fremling, Christoffer; Gal-Yam, Avishay; Kulkarni, Shrinivas R.; O'Brien, Andrew; Lundqvist, Peter; Murphy, Tara; Fender, Rob; Anand, Shreya; Belicki, Justin; Bellm, Eric C.; Coughlin, Michael W.; De, Kishalay; Golkhou, V. Zach; Graham, Matthew J.; Green, Dave A.; Hankins, Matt; Kasliwal, Mansi; Kupfer, Thomas; Laher, Russ R.; Masci, Frank J.; Miller, A. A.; Neill, James D.; Ofek, Eran O.; Perrott, Yvette; Porter, Michael; Reiley, Daniel J.; Rigault, Mickael; Rodriguez, Hector; Rusholme, Ben; Shupe, David L.; Titterington, David, We report the discovery and panchromatic follow-up observations of the young Type Ic supernova (SN Ic) SN 2020oi in M100, a grand-design spiral galaxy at a mere distance of 14 Mpc. We followed up with observations at radio, X-ray, and optical wavelengths from only a few days to several months after explosion. The optical behavior of the supernova is similar to those of other normal SNe Ic. The event was not detected in the X-ray band but our radio observations revealed a bright mJy source (Lν ≈ 1.2× 1027 erg s-1 Hz-1). Given the relatively small number of stripped envelope SNe for which radio emission is detectable, we used this opportunity to perform a detailed analysis of the comprehensive radio data set we obtained. The radio-emitting electrons initially experience a phase of inverse Compton cooling, which leads to steepening of the spectral index of the radio emission. Our analysis of the cooling frequency points to a large deviation from equipartition at the level of e/ B ⪆ 200, similar to a few other cases of stripped envelope SNe. Our modeling of the radio data suggests that the shock wave driven by the SN ejecta into the circumstellar matter (CSM) is moving at ∼ 3× 104 km s-1. Assuming a constant mass loss from the stellar progenitor, we find that the mass-loss rate is ⊙M≈ 1.4× 10-4 M⊙ yr-1 for an assumed wind velocity of 1000 km s-1. The temporal evolution of the radio emission suggests a radial CSM density structure steeper than the standard r -2. © 2020. The American Astronomical Society. All rights reserved., We thank the anonymous referee. A.H. is grateful for the support by grants from the Israel Science Foundation, the USIsrael Binational Science Foundation (BSF), and the I-CORE Program of the Planning and Budgeting Committee and the Israel Science Foundation. T.M. acknowledges the support of the Australian Research Council through grant FT150100099. D.D. is supported by an Australian Government Research Training Program Scholarship. D.R.A.W. was supported by the Oxford Centre for Astrophysical Surveys, which is funded through generous support from the Hintze Family Charitable Foundation. A.A.M. is funded by the Large Synoptic Survey Telescope Corporation, the Brinson Foundation, and the Moore Foundation in support of the LSSTC Data Science Fellowship Program; he also receives support as a CIERA Fellow by the CIERA Postdoctoral Fellowship Program (Center for Interdisciplinary Exploration and Research in Astrophysics, Northwestern University). M.P.T. acknowledges financial support from the State Agency for Research of the Spanish MCIU through the "Center of Excellence Severo Ochoa" award to the Instituto de Astrofisica de Andalucia (SEV-2017-0709) and through grant PGC2018-098915-B-C21 (MCI/AEI/FEDER, UE). J.M. acknowledges financial support from the State Agency for Research of the Spanish MCIU through the "Center of Excellence Severo Ochoa" award to the Instituto de Astrofisica de Andalucia (SEV-2017-0709) and from the grant RTI2018-096228-B-C31 (MICIU/FEDER, EU). A.G.Y.'s research is supported by the EU via ERC grant No. 725161, the ISF GW excellence center, an IMOS space infrastructure grant and BSF/Transformative and GIF grants, as well as The Benoziyo Endowment Fund for the Advancement of Science, the Deloro Institute for Advanced Research in Space and Optics, The Veronika A. Rabl Physics Discretionary Fund, Paul and Tina Gardner, Yeda-Sela and the WIS-CIT joint research grant; A.G.Y. is the recipient of the Helen and Martin Kimmel Award for Innovative Investigation. M.R. has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement n759194-USNAC). M.W.C. acknowledges support from the National Science Foundation with grant number PHY-2010970. C.F. gratefully acknowledges support of his research by the Heising-Simons Foundation (#2018-0907). Based on observations obtained with the Samuel Oschin Telescope 48 inch and the 60 inch Telescope at the Palomar Observatory as part of the Zwicky Transient Facility project. Z.T.F. is supported by the National Science Foundation under grant No. AST-1440341 and a collaboration including Caltech, IPAC, the Weizmann Institute for Science, the Oskar Klein Center at Stockholm University, the University of Maryland, the University of Washington, Deutsches Elektronen-Synchrotron and Humboldt University, Los Alamos National Laboratories, the TANGO Consortium of Taiwan, the University of Wisconsin at Milwaukee, and Lawrence Berkeley National Laboratories. Operations are conducted by COO, IPAC, and UW. Partly based on observations made with the Nordic Optical Telescope. SED Machine is based upon work supported by the National Science Foundation under grant No. 1106171. The National Radio Astronomy Observatory is a facility of the National Science Foundation operated under cooperative agreement by Associated Universities, Inc. The Australia Telescope Compact Array is part of the Australia Telescope National Facility which is funded by the Australian Government for operation as a National Facility managed by CSIRO. We acknowledge the Gomeroi people as the traditional owners of the Observatory site. e-MERLIN is a National Facility operated by the University of Manchester at Jodrell Bank Observatory on behalf of STFC. We thank the staff of the Mullard Radio Astronomy Observatory for their assistance in the commissioning, maintenance, and operation of AMI, which is supported by the Universities of Cambridge and Oxford. We also acknowledge support from the European Research Council under grant ERC-2012-StG-307215 LODESTONE. This work was supported by the GROWTH project funded by the National Science Foundation under grant No. 1545949.

We present the discovery of the second binary with a Roche lobe-filling hot subdwarf transferring mass to a white dwarf (WD) companion. This 56 minute binary was discovered using data from the Zwicky Transient Facility. Spectroscopic observations reveal an He-sdOB star with an effective temperature of $T_{\rm eff}=33,700\pm1000$ K and a surface gravity of $log(g)=5.54\pm0.11$. The GTC+HiPERCAM light curve is dominated by the ellipsoidal deformation of the He-sdOB star and shows an eclipse of the He-sdOB by an accretion disk as well as a weak eclipse of the WD. We infer a He-sdOB mass of $M_{\rm sdOB}=0.41\pm0.04$ M$_\odot$ and a WD mass of $M_{\rm WD}=0.68\pm0.05$ M$_\odot$. The weak eclipses imply a WD black-body temperature of $63,000\pm10,000$ K and a radius $R_{\rm WD}=0.0148\pm0.0020$ M$_\odot$ as expected for a WD of such high temperature. The He-sdOB star is likely undergoing hydrogen shell burning and will continue transferring mass for $\approx1$ Myrs at a rate of $10^{-9} M_\odot {\rm yr}^{-1}$ which is consistent with the high WD temperature. The hot subdwarf will then turn into a WD and the system will merge in $\approx30$ Myrs. We suggest that Galactic reddening could bias discoveries towards preferentially finding Roche lobe-filling systems during the short-lived shell burning phase. Studies using reddening corrected samples should reveal a large population of helium core-burning hot subdwarfs with $T_{\rm eff}\approx25,000$ K in binaries of 60-90 minutes with WDs. Though not yet in contact, these binaries would eventually come into contact through gravitational wave emission and explode as a sub-luminous thermonuclear supernova or evolve into a massive single WD., Comment: accepted for publication in ApJL, 11 pages, 5 figures and 1 tables. arXiv admin note: text overlap with arXiv:2002.01485

The InfraRed Imaging Spectrograph (IRIS) is one of three first light science instruments for the Thirty Meter Telescope (TMT). It will provide dedicated function of imaging and integral field spectroscopic observations in parallel with the assistance of a Narrow Field InfraRed Adaptive Optics System (NFIRAOS). The IRIS imager delivers celestial light to a dual-channel Integral Field Spectrograph (IFS) through a pair of pick-off mirrors in the central field. The IFS creates multi-functional ability to explore the universe in IR (0.84 – 2.4um) with moderate spectral resolution of R=4,000/8,000 and four spaxel scales of 4, 9, 25, 50 milli-arc-seconds (mas). An image slicer serves one of the two spectral channels as its Integral Field Unit (IFU) in two coarse spaxel scales of 25 and 50mas over the continuous science fields of 2.2x1.125 arc-seconds (arcsec) and 4.4x2.25 arcsec respectively. It splits the field to 88 unit systems, and then re-images at two parallel slits in order to take full advantage of the detector (4Kx4K @ 15um). This paper describes a novel all-reflective design of image slicer, which uses a new ‘brick stage’ layout to stagger the adjacent mirrors and deliver image quality close to diffraction limit. The quasi-telecentric optical design gives more friendly interfaces with pre-optics and spectrograph than the conceptual design. Here, more technical issues are discussed to guide the further study on optical performance and fabrication feasibility.

Zwicky Transient Facility is an integrated, multi-band astronomical survey system optimized for sensitivity, observing cadence, and efficiency. The key subsystem consists of a 600 megapixel CCD focal plane mounted in a flat-fielding vacuum cryostat, located at the prime focus of the 1.2-meter Samuel Oschin Telescope at Palomar Observatory. Supporting subsystems include a new 2.4-meter optical shutter assembly, a 1.35-meter diameter aspheric corrector plate, a cryostat stabilizing hexapod, a commercial robotic arm-based exchanger, three 440 millimeter width filters, four guide/focus CCDs, and dedicated optics compensating individual field curvature over each of sixteen 6k x 6k science CCDs.To optimize ZTF efficiency, all telescope and dome drives were upgraded for higher speed and acceleration, fast readout electronics were implemented, and a sophisticated robotic control system has been implemented. We present for the first time on-sky results from the recently completed ZTF including its realized optical image quality, CCD noise, and observing efficiency performance and discuss engineering challenges that have been overcome. Early scientific results from the ZTF survey are also included.

The focal ratio degradation effects on optical fibers, technically referred to as FRD, has been the subject of intense studies since the beginning of the use of optical fibers in the construction of instruments applied in astronomy. A number of studies attempt to relate FRD to light loss in the optical system and other studies attempt to qualify and quantify FRD as a function of the stress induced during assembly of the structures supporting the ends of the optical fibers. In this work, we present a large-scale study to characterize FRD in all the fibers that make up the cables of the FOCCoS, Fiber Optical Cable and Connectors System project. FOCCoS, has the main function of capturing the direct light from the focal plane of Subaru Telescope using 2400 optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. Our study provides procedures and methods to analyze the effects of FRD on all cable segments for each type of termination involved. Special attention is devoted to the understanding of how angular deviations between the input surface of the fiber and the test beam can significantly influence the calculation of FRD in optical fibers.

Publications of the Astronomical Society of the Pacific 131(995), 018002 - (2019). doi:10.1088/1538-3873/aaecbe, The Zwicky Transient Facility(ZTF)is a new optical time-domain survey that uses the Palomar 48 inch Schmidttelescope. A custom-built wide-field camera provides a 47 deg2field of view and 8 s readout time, yielding morethan an order of magnitude improvement in survey speed relative to its predecessor survey, the Palomar TransientFactory. We describe the design and implementation of the camera and observing system. The ZTF data system atthe Infrared Processing and Analysis Center provides near-real-time reduction to identify moving and varyingobjects. We outline the analysis pipelines, data products, and associated archive. Finally, we present on-skyperformance analysis andfirst scientific results from commissioning and the early survey. ZTF’s public alert streamwill serve as a useful precursor for that of the Large Synoptic Survey Telescope., Published by Univ. of Chicago Press, Journals Division10692, Chicago, Ill.

PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~ 1.6-2.7Å. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project recently started undertaking the commissioning process of a subsystem at the Subaru Telescope side, with the integration and test processes of the other subsystems ongoing in parallel. We are aiming to start engineering night-sky operations in 2019, and observations for scientific use in 2021. This article gives an overview of the instrument, current project status and future paths forward.

Front converters for the iPhone 6, from six different vendors, are examined in detail. Telephoto, wide angle, and fisheye converters are examined. System performance is measured, and the measured lens designs are presented. Great variety is found in both design type and performance; little correlation is found between performance and design type.

The Zwicky Transient Facility (ZTF) will be a major upgrade to the 48” Schmidt Camera at Palomar Observatory, which was initially commissioned in 1948. Although the optical design for ZTF is a relatively small part of the project, system requirements placed special constraints on the optical design. This paper presents the optical design for ZTF as well as the system requirements that drove the optical design.

Design approaches and performance data will be presented for converters for smart phones, including data and designs from six manufacturers, on telephoto, wide, and fisheye adapter.

The Zwicky Transient Facility Camera (ZTFC) is a key element of the ZTF Observing System, the integrated system of optoelectromechanical instrumentation tasked to acquire the wide-field, high-cadence time-domain astronomical data at the heart of the Zwicky Transient Facility. The ZTFC consists of a compact cryostat with large vacuum window protecting a mosaic of 16 large, wafer-scale science CCDs and 4 smaller guide/focus CCDs, a sophisticated vacuum interface board which carries data as electrical signals out of the cryostat, an electromechanical window frame for securing externally inserted optical filter selections, and associated cryo-thermal/vacuum system support elements. The ZTFC provides an instantaneous 47 deg^2 field of view, limited by primary mirror vignetting in its Schmidt telescope prime focus configuration. We report here on the design and performance of the ZTF CCD camera cryostat and report results from extensive Joule-Thompson cryocooler tests that may be of broad interest to the instrumentation community.

PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6-2.7A. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward., 17 pages, 10 figures. Proceeding of SPIE Astronomical Telescopes and Instrumentation 2016

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding cameras (AGCs), the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC's Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. In this report, the latest status of PFI development will be given including the performance of PFI components, the setup and performance of the integration and testing equipment., 9 pages, 8 figures, SPIE proceeding

Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or increased complexity in spectrograph design. Laborat\'orio Nacional de Astrof\'isica (LNA) has developed a system that can accurately and precisely measures FRD, using an absolute method that can also measure fiber throughput. This paper describes the metrology system and shows measurements of Polymicro fiber FBP129168190, FBP127165190 and Fujikura fiber 128170190. Although the FRD of the two fibers are low and similar to one another, it is very important to know the exact characteristics of these fibers since both will be used in the construction of FOCCoS (Fiber Optical Cable and Connectors System) for PFS (Prime Focus Spectrograph) to be installed at the Subaru telescope., Comment: 6 Pages, 10 Figures

The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms., 14 pages, 12 figures, submitted to "Ground-based and Airborne Instrumentation for Astronomy V, Suzanne K. Ramsay, Ian S. McLean, Hideki Takami, Editors, Proc. SPIE 9147 (2014)"

The Cobra fiber positioner is being developed by the California Institute of Technology (CIT) and the Jet Propulsion Laboratory (JPL) for the Prime Focus Spectrograph (PFS) instrument that will be installed at the Subaru Telescope on Mauna Kea, Hawaii. PFS is a fiber fed multi-object spectrometer that uses an array of Cobra fiber positioners to rapidly reconfigure 2394 optical fibers at the prime focus of the Subaru Telescope that are capable of positioning a fiber to within 5um of a specified target location. A single Cobra fiber positioner measures 7.7mm in diameter and is 115mm tall. The Cobra fiber positioner uses two piezo-electric rotary motors to move a fiber optic anywhere in a 9.5mm diameter patrol area. In preparation for full-scale production of 2550 Cobra positioners an Engineering Model (EM) version was developed, built and tested to validate the design, reduce manufacturing costs, and improve system reliability. The EM leveraged the previously developed prototype versions of the Cobra fiber positioner. The requirements, design, assembly techniques, development testing, design qualification and performance evaluation of EM Cobra fiber positioners are described here. Also discussed is the use of the EM build and test campaign to validate the plans for full-scale production of 2550 Cobra fiber positioners scheduled to begin in late-2014.

FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition., 11 pages, 20 figures

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding (A&G) cameras, the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy., 9 pages, 7 figures, SPIE Astronomical Telescopes and Instrumentation 2014

The Zwicky Transient Facility (ZTF) is a synoptic optical survey for high-cadence time-domain astronomy. Building upon the experience and infrastructure of the highly successful Palomar Transient Factory (PTF) team, ZTF will survey more than an order of magnitude faster than PTF in sky area and volume in order to identify rare, rapidly varying optical sources. These sources will include a trove of supernovae, exotic explosive transients, unusual stellar variables, compact binaries, active galactic nuclei, and asteroids. The single-visit depth of 20.4 mag is well matched to spectroscopic follow-up observations, while the co-added images will provide wide sky coverage 1.5 – 2 mag deeper than SDSS. The ZTF survey will cover the entire Northern Sky and revisit fields on timescales of a few hours, providing hundreds of visits per field each year, an unprecedented cadence, as required to detect fast transients and variability. This high-cadence survey is enabled by an observing system based on a new camera having 47 deg^2 field of view – a factor of 6.5 greater than the existing PTF camera - equipped with fast readout electronics, a large, fast exposure shutter, faster telescope and dome drives, and various measures to optimize delivered image quality. Our project has already received an initial procurement of e2v wafer-scale CCDs and we are currently fabricating the camera cryostat. International partners and the NSF committed funds in June 2014 so construction can proceed as planned to commence engineering commissioning in 2016 and begin operations in 2017. Public release will allow broad utilization of these data by the US astronomical community. ZTF will also promote the development of transient and variable science methods in preparation for the seminal first light of LSST.

Folded zoom lenses offer an interesting opportunity for a review of patent literature: they are of a reasonable complexity that the designs are likely to be instructive, they offer a small range of design constraints because of the standardization of CMOS imager sizes and the mechanical constraints imposed on DSC cameras, and there is enough recent activity in awarded patents that a representative sample of contemporary designs can be collected. This paper presents a review of recent patent literature for folded zoom lenses. Zemax models were built for the designs disclosed in 67 patents. For this large set of models, the distribution of paraxial properties and lens materials is presented. For the most-common design constraints, two particularly-similar disclosed designs are compared in detail. Engineering differences between the two disclosed designs are compared to differences in patent claims directed to the disclosed designs; the patents’ claims are shown to omit, at least for these two patents, some design differences that seem important from an engineering point of view.

We report a means of fabricating microlenses on transparent spacers that are self-aligned to optical fibers. The lenses so formed have f-numbers (f/sup /s) as low as f/1.55 and can be fabricated with minimal processing steps. Lenses can be fabricated desirably "over-sized," with input apertures larger than operational beam diameters, The lenses deviate from spherical by as little as /spl plusmn/80 nm over the middle 90% of their surfaces, and are diffraction limited when used in their paraxial regions. Previous work suggests that arrays of such lenses can be fabricated in parallel with good uniformity (/spl Delta/f/f/spl sim//spl plusmn/5.9% for a 15/spl times/15 array of 500 /spl mu/m f/1.4 lenses), stability, and reproducibility (average f/sup /s are reproducible to within 3.5%). Although coupling efficiencies have not been measured, these values suggest that the lenses are of sufficient quality for a variety of multimode fiber applications.

Distortion can be corrected in an image by placing a fourth-order aspheric optical element near the image plane. Moving the aspheric surface longitudinally changes the amount of distortion that is added by the aspheric surface without changing the paraxial image. Third-order astigmatism limits the performance of distortion correctors and may be eliminated by adding another fourth-order aspheric surface. Example elements were fabricated by diamond turning and were shown to introduce distortion without significantly degrading image quality. Three arrangements of distortion correctors are discussed: a single-element planoaspheric arrangement, an antisymmetric two-element arrangement, and a bi-aspheric arrangement in which distortion is not adjustable.

Cataract surgery with IOL implantation is performed on millions of patients every year. Despite 25 years of technological innovation, post-surgical refractive errors have remained a problem. Now these errors can be corrected using Calhoun Vision, Inc's light adjustable lens (LAL). The correction is accomplished by implanting a light-sensitive lens, then illuminating it with a spatially varying irradiance profile during a postoperative treatment. This irradiance profile is provided by a Light Delivery Device (LDD), which projects an image of a Texas Instruments DMD onto the implanted lens. Commercial sales of this system began in the summer of 2008 in Europe; US clinical trials began in January 2009.

The MEMS based fiber optical switch matrix is clearly an advanced technology for medium and large port-count optical cross-connects in optical networks. Regarding expandability, performance (as integration, insertion loss, polarization dependence loss, crosstalk, uniformity, wavelength flatness, directivity, return loss) and long-term reliability (temperature storage and cycling, FIT rate) the digital MEMS based switches meet the applicable Telcordia Generic Requirements. For the first time we show that MEMS based optical switches can meet those rigorous requirements.

In conclusion we have demonstrated fully nonblocking 16/spl times/16 switches in a single chip solution using MEMS fabricated by a surface micro-machining. We have shown how the critical mechanical elements of the MEMS-cell have been chosen to achieve large mechanical movement, high angular repeatability of the movement, and high reliability of the actuation mechanism, which translated into low loss and high reliability of the packaged component. Test results for these components have been presented.

Summary form only given. Fiber-optic telecommunications networks will continue to increase in size and complexity, especially as local exchange companies begin to deploy fiber-in-the-loop. A single OTDR can perform line monitoring of thousands of fibers using an out-of-band wavelength and a 1 /spl times/ N opto-mechanical switch. Currently, such switches use a mechanical actuator to move a collimated input fiber across a sequence of individually lensed output fibers. This design yields reliable, repeatable, stable, and efficient switches. However, it does not scale to very large N because most of the cost comes from aligning individual focus lenses to each output. We show a more cost-effective approach to building large 1 /spl times/ N switches, where the input and all output fibers are carried in a fiber bundle and share a single lens. The input light is collimated and directed into a two axis scanner.

We describe a new optoelectronic switching system demonstration that implements part of the distribution fabric for a large asynchronous transfer mode (ATM) switch. The system uses a single optoelectronic VLSI modulator-based switching chip with more than 4000 optical input–outputs. The optical system images the input fibers from a two-dimensional fiber bundle onto this chip. A new optomechanical design allows the system to be mounted in a standard electronic equipment frame. A large section of the switch was operated as a 208-Mbits/s time-multiplexed space switch, which can serve as part of an ATM switch by use of an appropriate out-of-band controller. A larger section with 896 input light beams and 256 output beams was operated at 160 Mbits/s as a slowly reconfigurable space switch.

Photonic switching systems image arrays of sources onto arrays of detectors and modulators. Even this simple functionality poses serious challenges for the optical engineer. Image quality must be excellent because the large modulator bandwidth demands small modulator size. Magnification and distortion must be precisely corrected for the spot array to fit onto the detector array. The system must be extraordinarily stable for the spots to stay on the detector array. For these reasons, photonic switching systems have traditionally been mounted on vibration isolated optical tables. This paper describes our newest system, which is mounted in a standard electronics frame. Experimental results and design methodologies are discussed.

To be competitive with electronic switching technologies, photonic switching systems must have stability that rivals that of electronic systems, requiring little or no intervention over time scales of years. This paper describes progress towards the goal of stable optical interconnects. We have built an extraordinarily stable free-space optical interconnect mounted in a standard electronics frame; the system operated successfully over a wide temperature range for three days and required no realignment after shipping. Robust optomechanical design played an important role in the successful operation of the system. The role of kinematic mounting principles, self-centering lens mounts, materials selection, and long-lever arm adjustments are described. Vigorous shaking of the system did not affect its bit-error rate -- measured to be less than 10E-12 on a single channel.© (1996) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

The staircase lens is a novel type of diffractive optical element which is particularly useful in applications such as laser range finders, CD pickup heads, and other laser collimators. The staircase lens is particularly promising for these applications because it allows for a singlet to be simultaneously corrected for both chromatic aberration and thermal effects. Designs are presented in PMMA for visible applications and Germanium for infrared applications. (MM)

The coatings which are used on telescope mirrors and other optical interfaces can have a profound effect on the image quality formed by an optical system. This paper evaluates the defocus and astigmatism which are caused by the s- and p-phase shifts of coatings. These coating-induced wavefront aberrations are usually insignificant, but can, under certain circumstances, overshadow the geometric wavefront aberrations of the system. The wavefront aberrations induced by reflection-enhanced coatings on an f/1.5 Cassegrain telescope are numerically evaluated as an example.

Distortion can be corrected in an image by placing a fourth-order aspheric optical element near the image plane. Moving the aspheric surface longitudinally changes the amount of distortion added by the aspheric surface without changing the paraxial image. This ability to readily adjust the amount of image correction can be a powerful design tool for distortion-critical optical systems, such as digital optical computers. Third order astigmatism limits the performance of distortion correctors and may be eliminated by adding another fourth-order aspheric surface. Example elements were fabricated using diamond turning and were shown to introduce distortion without significantly degrading image quality. Three arrangements of distortion correctors are discussed: a single-element plano-aspheric arrangement, an anti- symmetric two-element arrangement, and a biaspheric arrangement in which distortion is not adjustable.

In high-quality barcode readers, specular reflection from shiny barcodes is blocked by using a polarized scan laser and a crossed polarizer in front of the detector. When complex scanning geometries are required, the polarization properties of the mirrors in the system can become a limiting factor in system performance. Polarization raytracing allows systems such as barcode readers, LIDAR systems, and other polarization-critical systems to be accurately characterized. Polarization raytracing often requires the use of a local, ray-based coordinate system for expressing rays’ polarization states, yet the choice of coordinate system can have important implications on system analysis. An example is presented in which specular reflection is controlled in a barcode reader by using reflection-enhanced coatings on only one of the four sets of the mirrors in the system. The coordinate system used to express rays’ polarization states in the example system provides useful lessons for other systems. The other analytical methods used in this example can be applied to a variety of scanning systems.

The coatings used on telescope mirrors and other optical interfaces can have a marked effect on an optical system's image quality. We describe the wave-front aberrations, particularly the defocus and on-axis astigmatism, that are induced by the s- and p-phase shifts of coatings. These coating-induced wave-front aberrations are very small, particularly near the design wavelengths of the coatings, but they can under certain circumstances overshadow the geometric wave-front aberrations of the system. The wave-front aberrations that are induced by reflection-enhanced coatings on an À/1.5 Cassegrain telescope are numerically evaluated as an example. A theory of coating-induced on-axis astigmatism and chromatic aberration is presented, and a simple algorithm that uses polarization ray tracing to calculate coating-induced defocus and astigmatism coefficients in radially symmetric systems is provided.