Search

Cellulose nanomaterial (CNM) and polyethylenimine (PEI) composites have attracted growing attention due to their multifunctional characteristics, which have been applied in different fields. In this work, soybean hulls were valorized into carboxyl cellulose nanofibrils (COOH-CNFs), and composited into hydrogels with PEI by combining them with cationic chelating and physical adsorption strategies. Cellulose nanofibrils (CNFs) were produced from soybean hulls prior to oxidation by a TEMPO mediated reaction to obtain COOH–CNFs; then drops of zinc chloride were added to 1.5% aqueous COOH–CNF dispersions, which were left for 24 h to form COOH-CNF hydrogels. Finally, the hydrogels were functionalized using different concentration of PEI solutions over a range of pH values. Elemental analysis results showed that 20% aq. PEI at pH 11.6 is the optimum condition to synthesize the COOH–CNF/PEI hydrogels. Additionally, the adsorption efficiency for the removal of anionic methyl blue dyes and Cu(II) ions from water was tested, reaching 82.6% and 69.8%, respectively, after 24 h. These results demonstrate the great potential of COOH–CNF/PEI hydrogels as adsorbent materials for water remediation. Graphical abstract

Here, we report the synthesis of robust hybrid iodinated silica-lipid nanoemulsions (HSLNEs) for use as a contrast agent for ultrasound and X-ray applications. We engineered iodinated silica nanoparticles (SNPs), lipid nanoemulsions, and a series of HSLNEs by a low-energy spontaneous nanoemulsification process. The formation of a silica shell requires sonication to hydrolyze and polymerize/condensate the iodomethyltrimethoxysilane at the oil/water interface of the nanoemulsion droplets. The resulting nanoemulsions (NEs) exhibited a homogeneous spherical morphology under transmission electron microscopy. The particles had diameters ranging from 20 to 120 nm with both negative and positive surface charges in the absence and presence of cetyltrimethylammonium bromide (CTAB), respectively. Unlike CTAB-coated nanoformulations, the CTAB-free NEs showed excellent biocompatibility in murine RAW macrophages and human U87-MG cell lines in vitro. The maximum tolerated dose assessment was evaluated to verify their safety profiles in vivo. In vitro X-ray and ultrasound imaging and in vivo computed tomography were used to monitor both iodinated SNPs and HSLNEs, validating their significant contrast-enhancing properties and suggesting their potential as dual-modality clinical agents in the future.

Infections of Toxoplasma gondii can cause severe and sometimes fatal diseases in immunocompromised individuals. The de novo heme biosynthesis pathway is required for intracellular growth and pathogenesis, making it an appealing therapeutic target. We synthesized a small library of derivatives of the herbicide oxadiazon, a known inhibitor of the penultimate reaction within the heme biosynthesis pathway in plants, catalyzed by protoporphyrinogen oxidase (PPO). Seven of the 18 analogs exhibit potent intracellular growth inhibition of wild-type T. gondii (IC(50) = 1 to 2.4 μM). An assay of the compounds against Toxoplasma PPO knockout and complementation strains confirmed the mode of action to be due to the potent inhibition of PPO. The most potent compounds have no detectable cytotoxicity against human foreskin fibroblast cells up to 100 μM. This study suggests that oxadiazon derivatives may represent a new molecular scaffold for the effective treatment of T. gondii infections.

A versatile biosensing platform based on a single electrode electrochemical system, paper-based devices and glow sticks.

Microbial pathogens use proteases for their infections, such as digestion of proteins for nutrients and activation of their virulence factors. As an obligate intracellular parasite,Toxoplasma gondiimust invade host cells to establish its intracellular propagation. To facilitate invasion, the parasites secrete invasion effectors from microneme and rhoptry, two unique organelles in apicomplexans. Previous work has shown that some micronemal invasion effectors experience a series of proteolytic cleavages within the parasite’s secretion pathway for maturation, such as the aspartyl protease (TgASP3) and the cathepsin L-like protease (TgCPL), localized within the post-Golgi compartment (1) and the endolysosomal system (2), respectively. Furthermore, it has been shown that the precise maturation of micronemal effectors is critical forToxoplasmainvasion and egress (1). Here, we show that an endosome-like compartment (ELC)-residing cathepsin C-like protease (TgCPC1) mediates the final trimming of some micronemal effectors, and its loss further results in defects in the steps of invasion, egress, and migration throughout the parasite’s lytic cycle. Notably, the deletion of TgCPC1 completely blocks the activation of subtilisin-like protease 1 (TgSUB1) in the parasites, which globally impairs the surface-trimming of many key micronemal invasion and egress effectors. Additionally, we found that TgCPC1 was not efficiently inhibited by the chemical inhibitor targeting its malarial ortholog, suggesting that these cathepsin C-like orthologs are structurally different within the apicomplexan phylum. Taken together, our findings identify a novel function of TgCPC1 in the processing of micronemal proteins within the secretory pathway ofToxoplasmaparasites and expand the understanding of the roles of cathepsin C protease.IMPORTANCEToxoplasma gondiiis a microbial pathogen that is well adapted for disseminating infections. It can infect virtually all warm-blooded animals. Approximately one-third of the human population carries toxoplasmosis. During infection, the parasites sequentially secrete protein effectors from the microneme, rhoptry, and dense granule, three organelles exclusively found in apicomplexan parasites, to help establish their lytic cycle. Proteolytic cleavage of these secretory proteins is required for the parasite’s optimal function. Previous work has revealed that two proteases residing within the parasite’s secretory pathway cleave micronemal and rhoptry proteins, which mediate parasite invasion and egress. Here, we demonstrate that a cathepsin C-like protease (TgCPC1) is involved in processing several invasion and egress effectors. The genetic deletion ofTgCPC1prevented the complete maturation of some effectors in the parasites. Strikingly, the deletion led to a full inactivation of one surface-anchored protease, which globally impaired the trimming of some key micronemal proteins before secretion. Therefore, this finding represents a novel post-translational mechanism for the processing of virulence factors within microbial pathogens.

Hydrogels are promising candidates for wound healing bandages because they can mimic the native skin microenvironment. Additionally, there is increasing growth in the use of naturally derived materials and plant-based biomaterials to produce healthcare products with healing purposes because of their biocompatibility and biodegradation properties. In this study, cellulose extracted from biodiverse sources in Ecuador was used as the raw material for the fabrication of hydrogels with enhanced antifouling properties. Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the cellulose and hydrogels.

Various noninvasive imaging techniques are used to produce deep-tissue and high-resolution images for biomedical research and clinical purposes. Organic and inorganic bioimaging agents have been developed to enhance the resolution and contrast intensity. This paper describes the synthesis of polytetrafluoroethylene-like nanoparticles (PTFE≈ NPs), their characterization, biological activity, and bioimaging properties. Transmission electron microscopy (TEM) images showed the shape and the size of the as-obtained small and ultrasmall PTFE≈ NPs. Fourier transform infrared spectroscopy (FTIR) confirmed the PTFE-like character of the samples. X-ray diffraction (XRD) enabled the determination of the crystallization system, cell lattice, and index of crystallinity of the material in addition to the presence of titania (TiO2) as the contamination. These findings were corroborated by X-ray photoelectron spectroscopy (XPS) that identifies the chemical states of the elements present in the samples along with their atomic percentages allowing the determination of both the purity index of the sample and the nature of the impurities. Additionally, diffuse reflectance ultraviolet-visible spectroscopy (UV-vis) was used to further assess the optical properties of the materials. Importantly, PTFE≈ NPs showed significant in vitro and in vivo biocompatibility. Lastly, PTFE≈ NPs were tested for their ultrasound and X-ray contrast properties. Our encouraging preliminary results open new avenues for PTFE-like nanomaterials as a suitable multifunctional contrast agent for biomedical imaging applications. Combined with suitable surface chemistry and morphology design, these findings shed light to new opportunities offered by PTFE nanoparticles in the ever-booming biomedical field.

Our previous method to access the diazacyclobutene scaffold did not allow for modification of the substituent originating from the 1,2,4-triazoline-3,5-dione component. We have circumvented this challenge and expanded access to additional structural diversity of the scaffold. A telescoped urazole oxidation and Lewis acid-catalyzed cyclization provided R(3)-substituted diazacyclobutenes. Calcium hypochlorite-mediated oxidation of urazoles followed by MgCl(2)-catalyzed cyclization of the resulting triazolinediones with thioalkynes promoted the formation of diazacyclobutenes bearing substitution at the R(3) position originating from the triazolinedione component.

The structures of seven compounds based on guanidinium cations, isolated sulfate anions, and additional organic cations and solvent molecules are reported. All seven compounds, (C(NH2)3)2(SO4) (1), (C(NH2)3)3(C5H6N)(SO4)2 (2), (C(NH2)3)3(C5H6N)(SO4)2·H2O (3), (C(NH2)3)3(C5H6N)(SO4)2·CH3OH (4), (C(NH2)3)11(C5H6N)(SO4)6·2.5C2H5OH (5), (C(NH2)3)3(C6H16N)(SO4)2 (6), and (C(NH2)3)2(C20H26N2O2)(SO4)2 (7) crystallize without a center of symmetry, and are built of related motifs of six-membered rings via hydrogen bonding of three guanidinium cations and three sulfate anions. These six-membered rings form extended sheets and frameworks through additional hydrogen bonding interactions. The presence of additional cations and solvent molecules in varying ratios add structural diversity by modifying the guanidinium sulfate frameworks, but retaining the acentricity of the structures. The study reveals a remarkable tendency for these guanidinium sulfate frameworks to crystallize without a center of symmetry, and furthermore, in polar or chiral space groups. This provides a potential pathway for the use of hydrogen bonding interactions to design structures having interesting physical or nonlinear optical properties.

Lipid nanoemulsions (LNEs) are promising nanocarriers for delivering high payloads of lipophilic molecules. Nonetheless, the dynamic nature at their aqueous interfaces results in poor surface chemistry and thus ligand functionalization can be challenging. Herein, two independent strategies, postconjugation and preconjugation, were explored to prepare LNEs grafted covalently with model ligands, fluorescein dye and RGD peptide, respectively. Fluorescein was successfully conjugated with high grafting efficiency to an amine-functionalized lipid nanoemulsion (NH

Electrophilic halofunctionalization reactions have undergone a resurgence sparked by recent discoveries in the field of catalytic asymmetric halocyclizations. To build mechanistic understanding of these asymmetric transformations, a toolbox of analytical methods has been deployed, addressing the roles of catalyst, electrophile (halenium donor), and nucleophile in determining rates and stereopreferences. The test reaction, (DHQD)2PHAL-catalyzed chlorocyclization of 4-arylpent-4-enoic acid with 1,3-dichloro-5,5-dimethylhydantoin (DCDMH), is revealed to be first order in catalyst and chlorenium ion donor and zero order in alkenoic acid substrate under synthetically relevant conditions. The simplest interpretation is that rapid substrate-catalyst binding precedes rate-limiting chlorenium attack, controlling the face selectivity of both chlorine attack and lactone closure. ROESY and DFT studies, aided by crystal structures of carboxylic acids bound by the catalyst, point to a plausible resting state of the catalyst-substrate complex predisposed for asymmetric chlorolactonization. As revealed by our earlier labeling studies, these findings suggest modes of binding in the (DHQD)2PHAL chiral pocket that explain the system's remarkable control over rate- and enantioselection-determining events. Though a comprehensive modeling analysis is beyond the scope of the present work, quantum chemical analysis of the fragments' interactions and candidate reaction paths point to a one-step concerted process, with the nucleophile playing a critical role in activating the olefin for concomitant electrophilic attack.

Ultrasound (US) and X-ray imaging are diagnostic methods that are commonly used to image internal body structures. Several organic and inorganic imaging contrast agents are commercially available. However, their synthesis and purification remain challenging, in addition to posing safety issues. Here, we report on the promise of widespread, safe, and easy-to-produce particulate calcium fluoride (part-CaF2) as a bimodal US and X-ray contrast agent. Pure and highly crystalline part-CaF2 is obtained using a cheap commercial product. Scanning electron microscopy (SEM) depicts the morphology of these particles, while energy-dispersive X-ray spectroscopy (EDS) confirms their chemical composition. Diffuse reflectance ultraviolet-visible spectroscopy highlights their insulating behavior. The X-ray diffraction (XRD) pattern reveals that part-CaF2 crystallizes in the face-centered cubic cell lattice. Further analyses regarding peak broadening are performed using the Scherrer and Williamson–Hall (W-H) methods, which pinpoint the small crystallite size and the presence of lattice strain. X-ray photoelectron spectroscopy (XPS) solely exhibits specific peaks related to CaF2, confirming the absence of any contamination. Additionally, in vitro cytotoxicity and in vivo maximum tolerated dose (MTD) tests prove the biocompatibility of part-CaF2. Finally, the results of the US and X-ray imaging tests strongly signal that part-CaF2 could be exploited in bimodal bioimaging applications. These findings may shed a new light on calcium fluoride and the opportunities it offers in biomedical engineering.

We have previously demonstrated that cellulose nanocrystals modified with poly(ethylenimine) (PEI-f-CNC) are capable of capturing volatile organic compounds (VOCs) associated with malodors. In this manuscript, we describe our efforts to develop a scalable synthesis of these materials from bulk cotton. This work culminated in a reliable protocol for the synthesis of unmodified cellulose nanocrystals (CNCs) from bulk cotton on a 0.5 kg scale. Additionally, we developed a protocol for the modification of the CNCs by means of sequential 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) oxidation and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) coupling to modify their surface with poly(ethylenimine) on a 100 g scale. Subsequently, we evaluated the performance of the PEI-f-CNC materials that were prepared in a series of VOC capture experiments. First, we demonstrated their efficacy in capturing volatile fatty acids emitted at a rendering plant when formulated as packed-bed filter cartridges. Secondly, we evaluated the potential to use aqueous PEI-f-CNC suspensions as a spray-based delivery method for VOC remediation. In both cases, the PEI-f-CNC formulations reduced detectable malodor VOCs by greater than 90%. The facile scaled synthesis of these materials and their excellent performance at VOC remediation suggest that they may emerge as a useful strategy for the remediation of VOCs associated with odor.

Periodic mesoporous organosilica nanoparticles (PMO SiNPs) were developed for the targeted capture of specific volatile organic compounds (VOCs). The removal kinetics for adsorbing VOCs were fast and the maximum removal could be achieved within less than 30 min. PMO SiNPs removed >99% of VOCs at a low sorbent dose (i.e. >0.5 mL analyte per g PMO SiNPs). They also showed good recyclability and maintained reasonable removal efficiencies after five cycles (i.e. 77% and 65% for hexanal and butyric acid vapors, respectively).

Aldehydes are commonly encountered Volatile Organic Compounds (VOCs) released to the atmosphere from a variety of anthropogenic sources. Based on the increasing interest in developing sustainable and environmentally friendly materials for the decontamination of VOCs, cellulose particles have emerged as one possible candidate, but there is a lack of understanding of the physicochemical properties affecting the adsorption of VOCs, and the effect of the extraction source on these intrinsic features. The present study was focused on the evaluation of unmodified cellulose particles extracted from biodiverse sources in Ecuador as potential VOC decontaminants. Modifications of the natural fibers with polyethylenimine (PEI) coating were performed to enhance the adsorption effectiveness. Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) measurements, and scanning electron microscopy (SEM) methods were used to characterize the physicochemical properties of the isolates. Gas chromatography assays demonstrated that unmodified cellulose can adsorb an aldehyde VOC, hexanal, reaching up to a 56.42 ± 7.30% reduction. Electrostatic coating of the cellulose particles with small quantities of PEI enhanced the VOC remediation capacities (i.e. 98.12 ± 1.18%). Results demonstrated that the biodiverse plant source of the cellulose isolate can affect the gas capturing properties, and that these particles can be an environmentally friendly solution for effective adsorption of VOC pollutants.

A novel technique for the absolute stereochemical determination of alcohols has been developed that uses crystallization of guanidinium salts of organosulfates. The simple one-pot, two-step process leverages facile formation of guandinium organosulfate single crystals for the straightforward determination of the absolute stereochemistry of enantiopure alcohols by means of X-ray crystallography. The strong hydrogen bonding network drives the stability of the crystal lattice and allows for a diverse range of organic alcohol substrates to be analyzed.

Strategies for the synthesis of a new class of porous and nonporous biodegradable microparticles (MPs) based on poly(D,L-lactic acid)-poly(ethylene glycol)-COOH (PDLLA-PEG-COOH) or poly(D,L-lactide-co-glycolide) (PLGA) copolymers have been investigated. Further, these MPs were coated with polyethylenimine (PEI) in order to compare the performance of the naked and PEI-capped MPs for the gas phase capture of model aldehyde VOCs, hexanal and octanal. The removal efficiencies of the different MP formulations ranged from 50% reduction to 97% reduction of VOC vapors. By coupling the intrinsic gas adsorption properties of the parent, naked MPs with the potential for covalent capture by means of PEI-surface coating, we have generated new materials exhibiting a dual modality for VOC capture. These materials represent a new matrix for the remediation of VOCs based on renewable, sustainable polymers.

The α-oxidized thioimidates are useful bidentate ligands and are important motifs in pharmaceuticals, pesticides, and fungicides. Despite their broad utility, a direct route for their synthesis has been elusive. Herein, we describe a one-step synthesis of N,N-dicarbamoyl 2-iminothioimidates from easily accessible thioacetylenes and commercially available azodicarboxylates (20 examples, ≤99% yield). Additionally, the mechanism of the transformation was extensively explored by variable-temperature NMR, in situ IR, and quantum mechanical simulations. These experiments suggest that the reaction commences with a highly asynchronous [2 + 2] cycloaddition, which leads to a four-membered diazacyclobutene intermediate with a barrier consistent with the observed reaction rate. This intermediate was then isolated for subsequent kinetic measurements, which yielded an experimental barrier within 1 kcal/mol of the calculated barrier for a subsequent 4π electrocyclic ring opening leading to the observed iminothioimidate products. This method represents the first direct route to α-oxidized thioimidates from readily accessible starting materials.

In this study we developed electrospun cellulose acetate nanofibers (CANFs) that were loaded with a model non-steroidal anti-inflammatory drug (NSAID) (ibuprofen, Ib) and coated with poly(acrylamide) (poly-AAm) hydrogel polymer using two consecutive steps: an electrospinning process followed by photopolymerization of AAm. Coated and non-coated CANF formulations were characterized by several microscopic and spectroscopic techniques to evaluate their physicochemical properties. An analysis of the kinetic release profile of Ib showed noticeable differences due to the presence or absence of the poly-AAm hydrogel polymer. Poly-AAm coating facilitated a constant release rate of drug as opposed to a more conventional burst release. The non-coated CANFs showed low cumulative drug release concentrations (ca. 35 and 83% at 5 and 10% loading, respectively). Conversely, poly-AAm coated CANFs were found to promote the release of drug (ca. 84 and 99.8% at 5 and 10% loading, respectively). Finally, the CANFs were found to be superbly cytocompatible.

Persistent Organic Pollutants (POPs) have become a very serious issue for the environment because of their toxicity, resistance to conventional degradation mechanisms, and capacity to bioconcentrate, bioaccumulate and biomagnify. In this review article, the safety, regulatory, and remediation aspects of POPs including aromatic, chlorinated, pesticides, brominated, and fluorinated compounds, are discussed. Industrial and agricultural activities are identified as the main sources of these harmful chemicals, which are released to air, soil and water, impacting on social and economic development of society at a global scale. The main types of POPs are presented, illustrating their effects on wildlife and human beings, as well as the ways in which they contaminate the food chain. Some of the most promising and innovative technologies developed for the removal of POPs from water are discussed, contrasting their advantages and disadvantages with those of more conventional treatment processes. The promising methods presented in this work include bioremediation, advanced oxidation, ionizing radiation, and nanotechnology. Finally, some alternatives to define more efficient approaches to overcome the impacts that POPs cause in the hydric sources are pointed out. These alternatives include the formulation of policies, regulations and custom-made legislation for controlling the use of these pollutants.

Suture biomaterials are critical in wound repair by providing support to the healing of different tissues including vascular surgery, hemostasis, and plastic surgery. Important properties of a suture material include physical properties, handling characteristics, and biological response for successful performance. However, bacteria can bind to sutures and become a source of infection. For this reason, there is a need for new biomaterials for suture with antifouling properties. Here we report two types of cellulose fibers from coconut (Cocos nucifera) and sisal (Agave sisalana), which were purified with a chemical method, characterized, and tested in vitro and in vivo. According to SEM images, the cellulose fiber from coconut has a porous surface, and sisal has a uniform structure without internal spaces. It was found that the cellulose fiber from sisal has mechanical properties closer to silk fiber biomaterial using Ultimate Tensile Strength. When evaluating the cellulose fibers biodegradability, the cellulose from coconut showed a rapid weight loss compared to sisal. The antifouling test was negative, which demonstrated that neither possesses intrinsic microbicidal activity. Yet, a weak biofilm was formed on sisal cellulose fibers suggesting it possesses antifouling properties compared to cellulose from coconut. In vivo experiments using healthy mice demonstrated that the scarring and mechanical connection was like silk for both cellulose fibers. Overall, our results showed the potential use of cellulose fibers from vegetal for surgical sutures due to excellent mechanical properties, rapid degradation, and no bacterial adhesion.

A series of amine-functionalized cellulose nanocrystal materials were successfully synthesized, characterized, and evaluated for the remediation of pesticide contaminants from organic and aqueous media. Their ability to degrade malathion in organic systems has been examined, resulting in up to 100% degradation of the compound into detectable lower molecular weight by-products. A poly(ethylenimine) cellulose nanocrystal (CNC-PEI) material was also capable of degrading aqueous solutions of malathion, deltamethrin, and permethrin with 100%, 95%, and 78% degradation, respectively. Thus, these materials can potentially serve as a new and viable remediation technique based on their ability to effectively degrade various pesticides. The reusability of the CNC-PEI was also explored. The CNC-PEI material maintained its ability to degrade malathion throughout two wash and re-use cycles.

Excipients represent the complement of the active principle in any pharmaceutical form. Their function is to provide stability, protection, and to ensure absorption of the drug and acceptability in patients. Cellulose is a conventional excipient in many pharmaceutical solid dosage products. Most of the sources used to extract microcrystalline cellulose come from cotton or wood, which are expensive and in high demand from other industries. As plants are considered the main source of excipient production, we have taken advantage of the biodiversity of Ecuador to evaluate microcrystalline cellulose extracted from boroj&oacute, (Alibertia patinoi), a native plant, as an excipient for solid dosage formulations. The method of choice for tablet manufacturing was direct compression since it is a conventional fabrication method in the pharmaceutical industry. First, we performed scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) in order to compare the structure and characteristics of the extracted cellulose with two reference commercial cellulose materials. Second, we performed quality tests to evaluate the use of the isolate as an excipient including fluidity, hardness, friability, and disintegration. Compared with commercial and microcrystalline cellulose, the extracted cellulose from the native plant showed comparable characteristics and is consequently a potential excipient that could be used in the pharmaceutical industry. Last, we performed a dissolution test in which we concluded that all tablets have a short release time of active principle.

We describe the inhibition of the starch utilization system (Sus) belonging to various strains of Bacteroides dorei in a non-lethal manner using the small molecule probe, acarbose. Concentrations of acarbose as low as 5 μM significantly impede the growth of B. dorei and increase the doubling time of cultures. The successful inhibition of this species of Bacteroides is relevant to several disease states including type I diabetes mellitus. This method continues to explore a new, potential route to intervene in illnesses associated with aberrant changes in the composition of the human gut microbiota through the strategic manipulation of its constituents.

The synthesis and application of gold nanoparticles (AuNPs) have attracted much attention due to their interesting optical and chemical properties, as well as their utility in imaging, therapeutics, sensors, electronics, and catalysis. AuNPs are synthesized using multiple approaches, followed by chemical modification or encapsulation, to enhance their colloidal stability, biocompatibility, and targeting. Here, we report the one-step synthesis of gold–polyester nanoparticles for use as an imaging agent. The AuNPs were prepared inside polymeric NPs by means of ultraviolet irradiation of a gold salt in the presence of Irgacure I-2959 photoinitiator. We monitored the kinetic growth and nucleation of AuNPs (in vitro and ex vivo) over time using spectral analysis. Moreover, we investigated the cytotoxicity, localized plasmonic surface resonance (LSPR), and cellular imaging capabilities of the Au–polyester nanoparticles. The resulting Au–polyester NPs were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), dynamic light scattering (DLS), and transmission electron microscopy (TEM) to probe their chemical structure, size, zeta potential (ζ), and morphology, respectively. Furthermore, in vitro experiments showed that the NP formulation is stable over time and exhibits negligible toxicity against 3T3 fibroblast and U-87 MG glioblastoma cells. The results also demonstrated that the Au–polyester NPs exhibit excellent cellular imaging properties. This one-step strategy goes beyond current syntheses of gold–polyester nanoparticles because it can be used to synthesize the imaging agent in situ (i.e., in living cells) in lieu of conventional ex situ approaches.

Electrophilic halofunctionalization reactions have undergone a resurgence sparked by recent discoveries in the field of catalytic asymmetric halocyclizations. To build mechanistic understanding of these asymmetric transformations, a toolbox of analytical methods has been deployed, addressing the roles of catalyst, electrophile (halenium donor), and nucleophile in determining rates and stereopreferences. The test reaction, (DHQD)

A formal [2 + 2] cycloaddition of 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) with electron-rich alkynyl sulfides and selenides is described. These investigations provide a convenient method to access diazacyclobutenes in good yield while tolerating a relatively broad substrate scope of thio-acetylenes. This method provides ready access to a unique and hitherto rarely accessible class of heterocycles. A combination of dynamic NMR, X-ray crystallography, and computation sheds light on the potential aromaticity of the scaffold.

Per- and polyfluoroalkyl substances (PFAS) are ubiquitous in many consumer products and present serious environmental challenges due to their persistent nature. Currently, conventional water treatment methods fail to remove PFAS, and other newly proposed materials/techniques face challenges when employed under realistic conditions. This study reports on poly(ethylenimine)-functionalized cellulose microcrystals (PEI-f-CMC) that showed a near-instant and high removal of PFAS under concentrations relevant to their actual occurrence in the natural environment (i.e.

Human African trypanosomiasis is a disease of sub-Saharan Africa, where millions are at risk for the illness. The disease, commonly referred to as African sleeping sickness, is caused by an infection by the eukaryotic pathogen, Trypanosoma brucei. Previously, a target-based high throughput screen revealed ebselen (EbSe), and its sulfur analog, EbS, to be potent in vitro inhibitors of the T. brucei hexokinase 1 (TbHK1). These molecules also exhibited potent trypanocidal activity in vivo. In this manuscript, we synthesized a series of sixteen EbSe and EbS derivatives bearing electron-withdrawing carboxylic acid and methyl ester functional groups, and evaluated the influence of these substituents on the biological efficacy of the parent scaffold. With the exception of one methyl ester derivative, these modifications ablated or blunted the potent TbHK1 inhibition of the parent scaffold. Nonetheless, a few of the methyl ester derivatives still exhibited trypanocidal effects with single-digit micromolar or high nanomolar EC50 values.

Synthetic materials exhibiting contrast imaging properties have become vital to the field of biomedical imaging. However, polymeric biomaterials are lacking imaging contrast properties for deep tissue imaging. This report details the synthesis and characterization of a suite of aryl-iodo monomers, which were used to prepare iodinated polyesters using a pre-functionalization approach. Commercially available 4-iodo-phenylalanine or 4-iodobenzyl bromide served as the starting materials for the synthesis of three iodinated monomeric moieties (a modified lactide, morpholine-2,5-dione, and caprolactone), which under a tin-mediated ring-opening polymerization (ROP), generated their respective polyesters (PE) or poly(ester amides) (PEA). An increase in X-ray intensity of all synthesized iodine-containing polymers, in comparison to non-iodinated poly(lactic acid) (PLA), validated their functionality as radio-opaque materials. The iodinated-poly(lactic acid) (iPLA) material was visualized through varying thicknesses of chicken tissue, thus demonstrating its potenial as a radio-opaque biomaterial.

Heme, an iron-enclosed organic ring, is essential for virtually all living organisms by serving as a prosthetic group in proteins that function in diverse cellular activities ranging from diatomic gas transport and detection to mitochondrial respiration to detoxification. Cellular heme levels in microbial pathogens can be a composite of endogenous de novo synthesis or exogenous uptake of heme or heme synthesis intermediates1,2. Intracellular pathogenic microbes switch routes for heme supply when heme availability in their replicative environment fluctuates through infections2. Here, we show that the Toxoplasma gondii, an obligate intracellular human pathogen, encodes a functional heme biosynthesis pathway. A chloroplast-derived organelle, termed apicoplast, is involved in the heme production. Genetic and chemical manipulation revealed that de novo heme production is essential for T. gondii intracellular growth and pathogenesis. Surprisingly, the herbicide oxadiazon significantly impaired Toxoplasma growth, consistent with phylogenetic analyses that show T. gondii protoporphyrinogen oxidase is more closely related to plants than mammals. We further improve upon this inhibition by 15-to 25-fold with two oxadiazon derivatives, providing therapeutic proof that Toxoplasma heme biosynthesis is a druggable target. As T. gondii has been used to model other apicomplexan parasites3, our study underscores the utility of targeting heme biosynthesis in other pathogenic apicomplexans.

The α-oxidized thioimidates are useful bidentate ligands and are important motifs in pharmaceuticals, pesticides, and fungicides. Despite their broad utility, a direct route for their synthesis has been elusive. Herein, we describe a one-step synthesis of

We describe the inhibition of the starch utilization system (Sus) belonging to various strains of Bacteroides dorei in a non-lethal manner using the small molecule probe, acarbose. Concentrations of acarbose as low as 5 μM significantly impede the growth of B. dorei and increase the doubling time of cultures. The successful inhibition of this species of Bacteroides is relevant to several disease states including type I diabetes mellitus. This method continues to explore a new, potential route to intervene in illnesses associated with aberrant changes in the composition of the human gut microbiota through the strategic manipulation of its constituents.

Rendering is a global industry that recycles by-products resulting from butchering operations, which process billions of animals per year. About 50% of the weight of livestock is not consumed by humans and must be processed by rendering operations, which cook and separate the material into its protein and fat components. These products serve as a sustainable food source for livestock, feedstocks for oleochemicals, and raw material for biodiesel refineries. Due to the scale and nature of the raw materials and the cooking process, rendering operations emit a significant, but as yet poorly quantified, VOC load. Assessing this VOC load is important in order to calibrate the industry’s contribution to global VOC emissions, and to help address nuisance odor problems. We conducted VOC air sampling of two facilities in California, USA during the winter and summer seasons. VOC and reduced sulfur analyses were conducted using 8 h ambient air samples. Analyses for amines, ammonia, aldehydes/ketones, and volatile fatty acids were conducted using sampling pumps. These analyses detected 43 compounds at the facilities, and the number and concentration of detectable compounds were seasonally dependent. The compounds present at the highest concentrations included: ammonia (1600–2800 ppb, i.e., winter–summer levels), acetic acid (80–320 ppb, along with twelve other fatty acids ranging from ~0.5–140 ppb), acetone (55–241 ppb, along with nine other aldehyde/ketone products ranging from 0.4–60 ppb), and ethanol (15–81 ppb). These constituents have low odor thresholds and thus contribute to nuisance odor problems. Further, the overall VOC contribution arising from rendering facilities on a global scale is as yet very poorly characterized. This analysis will be useful to guide the development of new odor abatement strategies and strategies for the reduction of VOC emissions associated with this critical industry.