Search

Lisinopril is a drug of the angiotensin-converting enzyme (ACE) inhibitor class that is primarily used in the treatment of hypertension. During the scale-up of the lisinopril process, one unknown impurity was observed and is identified. The present work describes the origin, synthesis, characterization, and control of this impurity. This paper also describes the synthesis and characterization of three other impurities listed in the European Pharmacopoeia 8.4 (Impurity C, D, and F).

Several related substances (RS4-RS10) were detected in lopinavir drug substance at levels ranging from 0.03% to 0.1% by employing gradient RP-HPLC. The related substances were identified by LC-MS analysis. These related substances were isolated and characterized by Mass, (1)H NMR and FT-IR spectral data. The separation was achieved on a YMC Pack ODS-AQ (250 mm x 4.6 mm, 5 microm) column thermostated at 45 degrees C using 0.02 M KH(2)PO(4) (pH 2.5): acetonitrile as a mobile phase in gradient elution mode. A PDA detector set at 210 nm was used for detection. The investigated validation elements showed the method has acceptable specificity, accuracy, linearity, precision, robustness and high sensitivity with detection limits and quantitation limits ranging from 0.028 microg/ml to 0.063 microg/ml and 0.084 microg/ml to 0.192 microg/ml respectively. The method can be used for routine quality control analysis and stability testing of lopinavir drug substance.

Clindamycin palmitate hydrochloride is a water soluble hydrochloride salt of the ester of clindamycin and palmitic acid. It is inactive in vitro, rapid in vivo hydrolysis converts this compound to the antibacterially active clindamycin. Total 12 impurities at levels ranging from 0.05% to 0.5% were detected by isocratic reverse-phase high performance liquid chromatography (HPLC) using RI detector. The molecular weights of impurities were determined by LC-MS analysis. Two impurities were starting materials and the remaining impurities were isolated from crude samples/enriched mother liquors using reverse-phase preparative HPLC. Based on the spectral data the structures of these impurities were characterized as, clindamycin palmitate sulphoxides alpha-/beta-isomers (impurity I); clindamycin laurate (impurity II); lincomycin palmitate (impurity III); clindamycin myristate (impurity IV); epiclindamycin palmitate (impurity V); clindamycin palmitate 3-isomer (impurity VI); clindamycin pentadecanoate (impurity VII); clindamycin B-palmitate (impurity VIII); clindamycin heptadecanoate (impurity IX) and clindamycin stearate (impurity X). Structural elucidation of all impurities by spectral data ((1)H NMR, (13)C NMR, MS and IR) and formation of these impurities have been discussed in detail.

One unknown impurity (degradation product) present at a level below 0.1% in the initial samples increased to a level of 0.5% in 6M/40 degrees C/75% RH stability samples of risperidone tablets was detected by gradient reverse-phase high-performance liquid chromatography (HPLC). This impurity was isolated using reverse-phase preparative liquid chromatography. Based on the spectral data the structure of this impurity is characterized as 3-[2-[4-[6-fluoro-1,3-benzoxazol-2-yl]piperidin-1-yl]ethyl]-2-methyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a] pyrimidin-4-one. Structural elucidation of this impurity by spectral data ((1)H NMR, (13)C NMR, DEPT, MS and IR), formation and mechanism has been discussed in detail.

In the process for the preparation of quetiapine fumarate (1), six unknown impurities and one known impurity (intermediate) were identified ranging from 0.05-0.15% by reverse-phase HPLC. These impurities were isolated from crude samples using reverse-phase preparative HPLC. Based on the spectral data, the impurities were characterized as 2-[4-dibenzo[b,f][1,4]thiazepine-11-yl-1 -piperazinyl]1 -2-ethanol (impurity I, desethanol quetiapine), 11-[(N-formyl)-1-piperazinyl]-dibenzo[b,f][1,4]thiazepine (impurity II, N-formyl piperazinyl thiazepine), 2-(2-hydroxy ethoxy)ethyl-2-[2-[4-dibenzo[b,f][1,4]thiazepine-11- piperazinyl-1-carboxylate (impurity III, quetiapine carboxylate), 11-[4-ethyl-1-piperazinyl]dibenzo [b,f][1,4] thiazepine (impurity IV, ethylpiperazinyl thiazepine), 2-[2-(4-dibenzo[b,f][1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]1-ethyl ethanol [impurity V, ethyl quetiapine), 1,4-bis[dibenzo[b,f][1,4]thiazepine-11-yl] piperazine [impurity VI, bis(dibenzo)piperazine]. The known impurity was an intermediate, 11-piperazinyldibenzo [b,f][1,4]thiazepine (piperazinyl thiazepine). The structures were established unambiguously by independent synthesis and co-injection in HPLC to confirm the retention times. To the best of our knowledge, these impurities have not been reported before. Structural elucidation of all impurities by spectral data (1H NMR, 13C NMR, MS and IR), synthesis and formation of these impurities are discussed in detail.

Didanosine is an antiviral drug. During the preparation of didanosine in our lab, six process related known impurities and one unknown impurity were detected in HPLC analysis at levels ranging from 0.05 to 0.8%. The same unknown impurity was also observed in commercial batches. This new impurity was isolated by preparative HPLC and co-injected with didanosine sample to confirm the retention times in HPLC. This impurity was characterized as, 9-(2,3,5-trideoxy-beta-D-glycero-pentofuranosyl)-9H-purin-6-one (2',3',5'-trideoxyinosine). Structural elucidation of this impurity by spectral data (1H NMR, 13C NMR, MS and IR) has been discussed.

Zaleplon is a pyrazolopyrimidine derivative and possesses sedative and hypnotic properties. Seven unknown impurities in zaleplon bulk drug at levels below 0.1% were detected by reverse-phase high performance liquid chromatography (HPLC). The starting material, 3-amino-4-cyanopyrazole and an intermediate, N-[3-[3-(dimethylamino)-1-oxo-2-propenyl]-phenyl]-N-ethylacetamide (DOPEA) were also present in the sample at a level below 0.1%. The molecular weights of impurities were determined by LC-MS analysis. These impurities were isolated from crude samples of zaleplon using reverse-phase preparative HPLC. Based on the spectral data the structures of these impurities were characterized as, N-(3-(3-(4-amino-2H-pyrazolo [3,4-d]pyrimidin-6-yl) pyrazolo[1,5-a] pyrimidin-7-yl)phenyl)-N-ethylacetamide (impurity I); N-[3-(3-carboxamidopyrazolo[1,5-a]pyrimidin-7-yl)phenyl]-N-ethylacetamide (impurity II); N-[3-(3-cyanopyrazolo[1,5-a]pyrimidin-7-yl)phenyl]acetamide (impurity III); N-[3-(3-cyanopyrazolo [1,5-a]pyrimidin-7-yl)phenyl]-N-methylacetamide (impurity IV); N-[3-(3-cyanopyrazolo[1,5-a] pyrimidin-5-yl)phenyl]-N-ethylacetamide (impurity V); N-[3-(3-cyanopyrazolo[1,5-a] pyrimidin-7-yl)phenyl]-N-ethylamine (impurity VI); N-[3-(3-cyano-6-[(E)-3-((N-ethyl-N-acetyl)amino)phenyl-3-oxoprop-1-enyl] pyrazolo[1,5-a]pyrimidin-7-yl) phenyl]-N-ethylacetamide (impurity VII). Structural elucidation of all impurities by spectral data ((1)H NMR, (13)C NMR, MS and IR) and formation of these impurities are discussed in detail.

Three unknown impurities in Cefdinir bulk drug at levels below 0.2% (ranging from 0.05 to 0.2%) have been detected by high performance liquid chromatography (HPLC). These impurities were isolated from crude sample of Cefdinir using preparative HPLC. Based on the spectral data (NMR, IR and MS) the structures of these impurities were characterized as (6R, 7R)-7-[(z)-2-(2-aminothiazol-4-yl)-2-hydroxyiminoacetamido]-8-oxo-3-vinyl-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylic acid-5-oxide (I). (6R, 7R)-7-[(z)-2-(2-aminothiazol-4-yl)-2-hydroxyiminoacetamido]-8-oxo-3-vinyl-5-thia-1-azabi-cyclo [4.2.0] oct-3-ene-2-carboxylic acid (II). (6R, 7R)-7-[(z)-2-(2-aminothiazol-4-yl)-2-hydroxyiminoacetamido]-8-oxo-3-methyl-5-thia-1-azabicyclo-[4.2.0]oct-2-ene-2-carboxylic acid (III), respectively. The origin and structural elucidation of all impurities have been discussed.

Ceftizoxime sodium is a parenteral beta-lactamic antibacterial drug. In the synthesis of ceftizoxime sodium, eight process related impurities were detected in HPLC analysis. Pure impurities obtained by both synthesis and preparative HPLC were co-injected with ceftizoxime sample to confirm the retention times in HPLC. The impurities were characterized as, (6R,7R)-7-amino-3-cephem-4-carboxylic acid (impurity I); (6R,7R)-7-[(Z)-2-(2-amino-4-thiazolyl)-2-(methoxyimino)acetamido]-3-cephem-1-oxo-4-carboxylic acid (impurity II); (4RS,6R,7R)-7-[(Z)-2-(2-amino-4-thiazolyl)-2-(methoxyimino) acetamido]-3,4-dihydro-3-cephem-4-carboxylic acid (impurity III); (6R,7R)-7-[(E)-2-(2-amino-4-thiazolyl)-2-(methoxyimino)acetamido]-3-cephem-4-carboxylic acid (impurity IV); (6R,7R)-7-[(Z)-2-(2-amino-4-thiazolyl)-2-(methoxyimino)acetamido]-3-cephem-N-(3-cephem-4-carboxy-7-yl)-4-carboxamide (impurity V); (6R,7R)-7-[(Z)-2-[[(Z)-2-(2-amino-4-thiazolyl)-2-(methoxyimino)acetylamino]thiazol-4-yl]-2-methoxyiminoacetamido]-3-cephem-4-carboxylic acid (impurity VI); 2-mercaptobenzothiazole (impurity VII) and 2-mercapto benzothiazolyl [(Z)-2-(2-amino-4-thiazolyl)-2-methoxyimino] acetate (impurity VIII). Structural elucidation of all impurities by spectral data ((1)H NMR, (13)C NMR, MS and IR) has been discussed.