Search

aa

aa

aa

A number of materials used to fabricate disposable microfluidic devices are hydrophobic in nature with water contact angles on their surface ranging from 80 to over 100. This characteristic makes them unsuitable for a number of microfluidic applications. Both the wettability and analyte adsorption parameters are highly dependent on the surface hydrophobicity. In this article, we propose a general method to coat the surface of five materials: polydimethylsiloxane (PDMS), cyclic olefin copolymer (COC), polyethylene terephthalate (PET), polycarbonate (PC), and polytetrafluoroethylene (PTFE). This fast and robust process, which is easily implementable in any laboratory including microfabrication clean room facilities, was devised by combining gas-phase and wet chemical modification processes. Two different coatings that improve the surface hydrophilicity were prepared via the "dip and rinse" approach by immersing the plasma oxidized materials into an aqueous solution of two different poly(dimethylacrylamide) copolymers incorporating a silane moiety and functionalized with either N-acryloyloxysuccinimide (NAS) (poly(DMA-NAS-MAPS) or glycidyl methacrylate (GMA) (poly(DMA-GMA-MAPS). The coating formation was confirmed by contact angle (CA) analysis comparing the variation of CAs of uncoated and coated surfaces subjected to different aging treatments. The antifouling character of the polymer was demonstrated by fluorescence and interferometric detection of proteins adsorbed on the surafce. This method is of great interest in microfluidics due to its broad applicability to a number of materials with varying chemical compositions. © 2013 Springer Science+Business Media New York.

We report on the modification of a nitrocellulose film with copoly(DMA-NAS-MAPS), a tercopolymer based on N,N-dimethylacrylamide (DMA), N-acryloyloxysuccinimide (NAS), and 3-(trimethoxysilyl)propyl-methacrylate (MAPS). The chains of this polymer, interacting with nitrocellulose fibers, introduce active ester functionalities that Promote the covalent binding of short oligonucleotide fragments to the nitrocellulose thin film. Using colorimetric detection, naked eye visible DNA microarrays are developed for easy identification of foodborne pathogens. The fast and robust procedure of nitrocellulose functionalization opens the opportunity to implement this material in disposable analytical microdevices that do not require sophisticated readout systems.

We have recently introduced a silicon substrate for high-sensitivity microarrays, coated with a functional polymer named copoly(DMA-NAS-MAPS). The silicon dioxide thickness has been optimized to produce a fluorescence intensification due to the optical constructive interference between the incident and reflected lights of the fluorescent radiation. The polymeric coating efficiently suppresses aspecific interaction, making the low background a distinctive feature of these slides. Here, we used the new silicon microarray substrate for allergy diagnosis, in the detection of specific IgE in serum samples of subjects with sensitizations to inhalant allergens. We compared the performance of silicon versus glass substrates. Reproducibility data were measured. Moreover, receiver-operating characteristic (ROC) curves were plotted to discriminate between the allergy and no allergy status in 30 well-characterized serum samples. We found that reproducibility of the microarray on glass supports was not different from available data on allergen arrays, whereas the reproducibility on the silicon substrate was consistently better than on glass. Moreover, silicon significantly enhanced the performance of the allergen microarray as compared to glass in accurately identifying allergic patients spanning a wide range of specific IgE titers to the considered allergens.

The conformation of a three-dimensional polymeric coating (copoly(DMA-NAS-MAPS)) and immobilization and hybridization of DNA strands on the polymer coated surface are investigated. A conformational change, specifically the swelling of the surface adsorbed polymer upon hydration, is quantified in conjunction with the application of this polymer coating for DNA microarray applications. Fluorescently labeled short DNA strands (23mers) covalently linked to the functional groups on the adsorbed polymer are used as probes to measure the swelling of the polymer. A fluorescence microscopy technique, Spectral Self-Interference Fluorescence Microscopy (SSFM), is utilized to directly measure the change in axial position of fluorophores due to swelling with subnanometer accuracy. Additionally, immobilization characteristics of single stranded DNA (ssDNA) and double stranded DNA (dsDNA) probes, as well as hybridization of ssDNA with target strands have been studied. The results show that ssDNA further away from the surface is hybridized more efficiently, which strengthens the earlier analysis of this polymeric coating as a simple but highly efficient and robust DNA microarray surface chemistry.

An innovative route to activate silicon microcantilevers (MCs) for label free molecular recognition is presented. The method consists in coating the underivatized MCs with a functional ter-polymer based on N,N-dimethylacrylamide (DMA) bearing N-acryloyloxysuccinimide (NAS) and 3-(trimethoxysilyl)propyl-methacrylate (MAPS), two functional monomers that confer to the polymer the ability to react with nucleophilic species on biomolecules and with glass silanols, respectively. The polymer was deposited onto MCs by dip coating. Polymer coated MCs were tested in both static and dynamic modes of actuation, featuring detection of DNA hybridization as well as protein/protein interaction. In the dynamic experiments, focused on protein detection, the MCs showed an average mass responsivity of 0.4 Hz/pg for the first resonant mode and of 2.5 Hz/pg for the second resonant mode. The results of the static experiments, dedicated to DNA hybridization detection, allowed for direct estimation of the DNA duplex formation energetics, which resulted fully consistent with the nominal expected values. These results, together with easiness and cheapness, high versatility, and excellent stability of the recognition signal, make the presented route a reliable alternative to standard SAM functionalization (for microcantilevers (MCs) and for micro-electro-mechanical systems (MEMS) in general).

An unsurpassed level of sensitivity was reached in the detection of minority mutated alleles. A low-density microarray was printed on a substrate specifically designed to provide an interference effect which amplifies the collection of the light emitted on the support and reinforces the intensity of excitation light. Optimal performance of the array was obtained by maximizing the probe density and the binding efficiency to the target through a polymeric coating made by the adsorption of a copolymer of N,N-dimethylacrylamide (97% of moles), N,N-acryloyloxysuccinimide (2%) and 3-(trimethoxysilyl)propyl methacrylate (1%) synthesized by free radical copolymerization. The new substrate was used in the identification of fetal mutations in the maternal plasma DNA. Amino-modified amplicons from genomic DNA corresponding to the locus of eight beta-thalassemia mutations were immobilized and interrogated with dual-color oligonucleotide targets. Compared with the conventional glass substrates, the new substrate showed a great enhancement of fluorescence signals thanks to the combination of the optics with the highly efficient polymeric coating, allowing specific detection of all mutations. The high sensitivity and selectivity obtained made it possible to develop assays for the identification of paternally inherited mutations on fetal DNA in the maternal plasma in couples at risk for beta-thalassemia.

A robust method for coating polydimethylsiloxane (PDMS) allowing covalent binding of biomolecules is reported. The coating is based on adsorption of a copolymer, copoly(DMA-NAS-MAPS), bearing functional groups. The polymer is synthesized by free radical polymerization; it self-adsorbs onto the PDMS very rapidly, typically in 30 min, even without any PDMS surface pre-treatment. PDMS slides coated by copoly(DMA-NAS-MAPS) covalently bind amino-modified DNA fragments and have been tested in bacterial genotyping experiments. The usefulness of this functional coating on PDMS structures in lab-on-chip devices powered by microfluidics has been demonstrated. The copoly(DMA-NAS-MAPS) coated PDMS slides were used as flexible components of a microcell in semi-automated DNA microarray experiments for rapid food pathogen identification.

The reversible addition-fragmentation chain-transfer polymerization was used to prepare microarray slides grafted with polymer brushes for DNA-based applications. Block copolymer brushes of N,N-dimethylacrylamide (DMA) and glycidyl methacrylate (GMA), poly(DMA-b-GMA) were prepared by extending living poly(dimethylacrylamide) chains. The functional surface was used as a substrate for oligonucleotide hybridization experiments. The results were compared to those provided by glass slides coated by a self-assembled monolayer made of (3-glycidyloxypropyl)trimethoxysilane. Surfaces coated with block polymer brushes bearing oxirane groups are more efficient as substrates for oligonucleotide, hybridization than surfaces coated with nonpolymeric self-assembled monolayers containing the same functional group. The high probe grafting density and hybridization efficiency achieved with this polymeric coating reveal the importance of the block architecture to ensure good accessibility of the immobilized probe. The new surface was characterized by static angle measurements and diffuse reflectance FT-IR spectroscopy on a silica model system.