Search

Extracellular vesicles (EVs) have emerged as vehicles that mediate diverse cell-cell communication. However, in-depth understanding of these vesicles is hampered by a lack of a reliable isolation method to separate different types of EVs with high levels of integrity and purity. Here, we developed a nanoporous and ultra-thin membrane structure (NUTS) that warrants the size-based isolation of EVs without cake formation, minimizing the sample loss during the filtration process. By utilizing the micro-electro-mechanical systems (MEMS) technique, we could also control the pore size in nanoscale. We validated the performance of this membrane to separate EVs according to their size range.

A multiplexed bioelectronic sensor was developed for the purpose of rapid, on-site, and simultaneous detection of various target molecules. Olfactory and taste receptors were produced in Escherichia coli, and the reconstituted receptors were immobilized onto a multi-channel type carbon nanotube field-effect transistor. This device mimicked the human olfactory/taste system and simultaneously measured the conductance changes with high sensitivity and selectivity following treatment with various odor and taste molecules commonly known to be indicators of food contamination. Various pattern recognition of odorants and tastants was available with a customized platform for the simultaneous measurement of electrical signals. The simple portable bioelectronic device was suitable for efficient monitoring of food freshness and is expected to be used as a rapid on-site sensing platform with various applications.

Salmonella infection is the one of the major causes of food borne illnesses including fever, abdominal pain, diarrhea, and nausea. Thus, early detection of Salmonella contamination is important for our healthy life. Conventional detection methods for the food contamination have limitations in sensitivity and rapidity; thus, the early detection has been difficult. Herein, we developed a bioelectronic nose using a carbon nanotube (CNT) field-effect transistor (FET) functionalized with Drosophila odorant binding protein (OBP)-derived peptide for easy and rapid detection of Salmonella contamination in ham. 3-Methyl-1-butanol is known as a specific volatile organic compound, generated from the ham contaminated with Salmonella. We designed and synthesized the peptide based on the sequence of the Drosophila OBP, LUSH, which specifically binds to alcohols. The C-terminus of the synthetic peptide was modified with three phenylalanine residues and directly immobilized onto CNT channels using the π-π interaction. The p-type properties of FET were clearly maintained after the functionalization using the peptide. The biosensor detected 1 fM of 3-methyl-1-butanol with high selectivity and successfully assessed Salmonella contamination in ham. These results indicate that the bioelectronic nose can be used for the rapid detection of Salmonella contamination in food.

We report a strategy for the human-like smelling of a rose scent utilizing olfactory receptor nanodisc (ND)-based bioelectronic nose devices. In this strategy, a floating electrode (FE)-based carbon nanotube (CNT) field effect transistor (FET) was functionalized with human olfactory receptor 1A2 (hOR1A2)-embedded NDs (hOR1A2NDs). The hOR1A2NDs responded to rose scent molecules specifically, which were monitored electrically using the underlying CNT-FET. This strategy allowed us to quantitatively assess the contents of geraniol and citronellol, the main components of a rose scent, as low as 1 fM and 10 fM, respectively. In addition, it enabled us to selectively discriminate a specific rose odorant from other odorants. Significantly, we also demonstrated that the responses of hOR1A2NDs to a rose scent could be strongly enhanced by enhancer materials like a human nose. Furthermore, the method provided a means to quantitatively evaluate rose scent components in real samples such as rose oil. Since our method allows one to quantitatively evaluate general rose scent ingredients just like a human nose, it could be a powerful strategy for versatile basic research and various applications such as fragrance development.

We report a magnetically-focusing biochip structure enabling a single layered magnetic trap-and-release cycle for biosensors with an improved detection speed and selectivity. Here, magnetic beads functionalized with specific receptor molecules were utilized to trap target molecules in a solution and transport actively to and away from the sensor surfaces to enhance the detection speed and reduce the non-specific bindings, respectively. Using our method, we demonstrated the high speed detection of IL-13 antigens with the improved detection speed by more than an order of magnitude. Furthermore, the release step in our method was found to reduce the non-specific bindings and improve the selectivity and sensitivity of biosensors. This method is a simple but powerful strategy and should open up various applications such as ultra-fast biosensors for point-of-care services.

Olfactory receptors (ORs) are the largest family of the G protein-coupled receptors (GPCRs), which are significantly involved in many human diseases and 40% of all drug targets. A platform containing stable and high-quality OR would be a powerful tool for the development of a practical biosensor that can be applied to various applications, such as the early diagnosis of diseases, assessment of food quality, and drug and fragrance development. Significant efforts have been made to develop the biosensor using GPCRs; nevertheless, they remain a challenge. This chapter describes an attractive methodology for the development of a stable bioelectronic nose using OR-embedded nanodiscs. The ORs were produced in Escherichia coli (E. coli), purified with column chromatography, reconstituted into nanodiscs and applied to a carbon nanotube-field effect transistor (CNT-FET) with floating electrodes. The nanodisc-based bioelectronic nose exhibits high-performance in terms of sensitivity, selectivity and stability. This strategy can be used as a practical method for the receptor-based sensing approach, which represents significant progress in nano-bio technology toward a practical biosensor.

Cadaverine (CV), a death-associated odor, is an important target molecule for various sensor applications, including the evaluation of food spoilage. In this study, we developed an oriented nanodisc (ND)-functionalized bioelectronic nose (ONBN), based on carbon nanotube transistors and nanodiscs embedded with an olfactory receptor produced in Escherichia coli (E. coli) for detection of CV. To fabricate ONBN devices, a trace-amine-associated receptor 13c (TAAR13c) binding to CV was produced in E. coli, purified, reconstituted into NDs, and assembled, in the desired orientation, onto a carbon- nanotube-based field-effect transistor with floating electrodes. The ONBN showed high performance in terms of sensitivity and selectivity. Moreover, the ONBN was used to measure CV in diverse real-food samples for the determination of food freshness. These results indicate ONBN devices can be utilized to evaluate the quality of food samples quantitatively, which should enable versatile practical applications such as food safety and preservative development. Moreover, the ONBN could provide a useful tool for detection of corpses, which could be practically used in disaster responses.

The diffusion of lipids and proteins in cell membranes is involved in various cellular processes such as cell adhesion and cellular signaling. We report the anisotropic molecular diffusion in the membranes of human mesenchymal stem cells on aligned single-walled carbon nanotube networks. In this study, the cells were first cultured on the surfaces of glass, graphene, and carbon nanotube networks with random or aligned orientations. Then, the molecular diffusion constants of the cell membranes were measured using a fluorescence-recovery-after-photobleaching technique. The cells on graphene exhibited a diffusion constant comparable to that on glass substrate, while those on the rough surface of randomly oriented carbon nanotube networks exhibited a rather low diffusion constant. On the aligned carbon nanotube networks, the molecules in the cell membrane were found to diffuse faster along the direction parallel to the aligned carbon nanotubes than along the direction orthogonal to the nanotubes. These result...

We report a switchable biochip strategy where enzymes were entrapped in conducting polymer layers and the enzymatic reaction of the entrapped enzymes was controlled in real-time via electrical stimuli on the polymer layers. This device is named here as a "bio-switch chip" (BSC). We fabricated BSC structures using polypyrrole (Ppy) with entrapped glucose oxidase (GOx) and demonstrated the switching of glucose oxidation reaction in real-time. We found that the introduction of a negative bias voltage on the BSC structure resulted in the enhanced glucose oxidation reaction by more than 20 times than that without a bias voltage. Moreover, because the BSC structures could be fabricated on specific regions, we could control the enzymatic reaction on specific regions. In view of the fact that enzymes enable very useful and versatile biochemical reactions, the ability to control the enzymatic reactions via conventional electrical signals could open up various applications in the area of biochips and other biochemical industries.

We report a floating electrode-based bioelectronic tongue mimicking insect taste systems for the detection and discrimination of umami substances. Here, carbon nanotube field-effect transistors with floating electrodes were hybridized with nanovesicles containing honeybee umami taste receptor, gustatory receptor 10 of Apis mellifera (AmGr10). This strategy enables us to discriminate between l-monosodium glutamate (MSG), best-known umami tastant, and non-umami substances with a high sensitivity and selectivity. It could also be utilized for the detection of MSG in liquid food such as chicken stock. Moreover, we demonstrated the synergism between MSG and disodium 5'-inosinate (IMP) for the umami taste using this platform. This floating electrode-based bioelectronic tongue mimicking insect taste systems can be a powerful platform for various applications such as food screening, and it also can provide valuable insights on insect taste systems.

Structural phase transformations of silicon during nanoindentation were investigated in detail at the atomic level. The molecular dynamics simulations of nanoindentation on the (100) and (111) surface of single crystalline silicon were simulated, and this supported the theoretical prediction of the anisotropic behaviour of structural phase transformations. Simulations showed that microscopic aspects of phase transformation varied according to the crystallographic orientation of the contact surface and were directly linked to the slip system of silicon. In the transformed region along the centreline, the crystalline structure of Si-II and the amorphous structure were observed when silicon was loaded in the [100] and [111] directions, respectively. Simultaneously, metastable phases with fourfold coordination, such as Si-III and Si-XII, were formed by the inhomogeneous distortion in the slip direction of silicon and observed along the direction. Additionally, our results indicated that the deviatoric stress added to the hydrostatic pressure induced by loading was an indispensable factor for the structural phase transformation to Si-II during nanoindentation on the (100) surface.

The sense of taste helps humans to obtain information and form a picture of the world by recognizing chemicals in their environments. Over the past decade, large advances have been made in understanding the mechanisms of taste detection and mimicking its capability using artificial sensor devices. However, the detection capability of previous artificial taste sensors has been far inferior to that of animal tongues, in terms of its sensitivity and selectivity. Herein, we developed a bioelectronic tongue using heterodimeric human sweet taste receptors for the detection and discrimination of sweeteners with human-like performance, where single-walled carbon nanotube field-effect transistors were functionalized with nanovesicles containing human sweet taste receptors and used to detect the binding of sweeteners to the taste receptors. The receptors are heterodimeric G-protein-coupled receptors (GPCRs) composed of human taste receptor type 1 member 2 (hTAS1R2) and human taste receptor type 1 member 3 (hTAS1R3), which have multiple binding sites and allow a human tongue-like broad selectivity for the detection of sweeteners. This nanovesicle-based bioelectronic tongue can be a powerful tool for the detection of sweeteners as an alternative to labor-intensive and time-consuming cell-based assays and the sensory evaluation panels used in the food and beverage industry. Furthermore, this study also allows the artificial sensor to exam the functional activity of dimeric GPCRs.

Aquaporin-4 (AQP4) water channel protein transports water molecules across cell membranes bidirectionally and involves in a neurological disorder, neuromyelitis optica (NMO) caused by anti-AQP4 antibodies. Here, we developed a platform based on nanovesicle-carbon nanotube hybrid nanostructures for the real-time detection of anti-AQP4 antibodies and the electrophysiological monitoring of AQP4 activities. Using the hybrid device, we could detect anti-AQP4 antibodies with a high sensitivity and estimate the binding constants under different osmotic conditions. The results show AQP4 had a better affinity to anti-AQP4 antibodies under hyper-osmotic conditions than normal conditions. Furthermore, our device can be utilized to study the real-time cellular responses related with AQP4 such as those to different osmotic stresses. This nanovesicle-based platform can be a simple but versatile tool for basic research about AQP4 and related biomedical applications such as disease diagnostics.

Since carbon nanotubes (CNTs) have an extremely large surface-to-volume ratio, the electrical properties of CNTs can be easily changed by the adsorption of small molecules. Due to this attribute, CNT-based sensors can detect small molecules with a high sensitivity. Recently, bioelectronic noses based on CNTs have been developed by immobilizing olfactory receptors or nanovesicles on the surface of CNTs. By taking advantages of CNT structures, these bioelectronic nose devices allowed one to detect target odorants with a high sensitivity. Furthermore, they exhibited highly selective responses to target odorants with a single-carbon-atomic resolution just like human olfactory systems. These bioelectronic nose devices based on CNTs can be utilized for various practical applications such as food screening, medical diagnostics, and the fabrication of artificial noses.

We report the development of "nano-storage wires" (NSWs), which can store chemical species and release them at a desired moment via external electrical stimuli. Here, using the electrodeposition process through an anodized aluminum oxide template, we fabricated multisegmented nanowires composed of a polypyrrole segment containing adenosine triphosphate (ATP) molecules, a ferromagnetic nickel segment, and a conductive gold segment. Upon the application of a negative bias voltage, the NSWs released ATP molecules for the control of motor protein activities. Furthermore, NSWs can be printed onto various substrates including flexible or three-dimensional structured substrates by direct writing or magnetic manipulation strategies to build versatile chemical storage devices. Since our strategy provides a means to store and release chemical species in a controlled manner, it should open up various applications such as drug delivery systems and biochips for the controlled release of chemicals.

We demonstrated the quantitative electrophysiological monitoring of histamine and anti-histamine drug effects on live cells via reusable sensor platforms based on carbon nanotube transistors. This method enabled us to monitor the real-time electrophysiological responses of a single HeLa cell to histamine with different concentrations. The measured electrophysiological responses were attributed to the activity of histamine type 1 receptors on a HeLa cell membrane by histamine. Furthermore, the effects of anti-histamine drugs such as cetirizine or chlorphenamine on the electrophysiological activities of HeLa cells were also evaluated quantitatively. Significantly, we utilized only a single device to monitor the responses of multiple HeLa cells to each drug, which allowed us to quantitatively analyze the antihistamine drug effects on live cells without errors from the device-to-device variation in device characteristics. Such quantitative evaluation capability of our method would promise versatile applications such as drug screening and nanoscale bio sensor researches.

The behaviour of cells can be controlled by various microenvironments such as nanostructured cell-culture substrates with controlled nanotopography and chemical properties. One of promising substrates for controlled cell growth is a solid substrate comprised of synthetic one-dimensional nanostructures such as polymer nanofibers, carbon-based nanotubes/nanofibers, and inorganic nanowires. Such nanotube/nanowire structures have a similar dimension as extracellular matrix fibers, and their nanotopography and chemical properties can be easily controlled, which expands their possible applications in controlling the growth and differentiation of cells. This paper provides a concise review on the recent applications of solid substrates based on synthetic nanowires/nanotubes for controlled cell growth and differentiation.

This paper provides a concise review on the recent development of nanoscale hybrid systems based on carbon nanotubes (CNTs) for biological sensing and control. CNT-based hybrid systems have been intensively studied for versatile applications of biological interfaces such as sensing, cell therapy and tissue regeneration. Recent advances in nanobiotechnology not only enable the fabrication of highly sensitive biosensors at nanoscale but also allow the applications in the controls of cell growth and differentiation. This review describes the fabrication methods of such CNT-based hybrid systems and their applications in biosensing and cell controls.

International audience; Dimetyl metylphosphonate (DMMP) is a simulant of sarin, which is a representative of nerve agents. Sarin is an organophosphorus toxic compound that is an inhibitor of acetylcholinesterase, paralyzing human neurotransmission and the autonomic nervous system. Detection of these nerve agents has been considered important for safety issues to prevent terrorism and to counter military threats. Although there have been various studies on sensors for detecting DMMP as a simulant of sarin, limitations still exist in specificity, sensitivity, and reliability. To overcome these limitations, we utilized a human olfactory receptor (hOR)-based single-walled carbon nanotube-field effect transistor (swCNT-FET) as a platform for the detection of DMMP. The hORs have high specificity for their certain target molecules. swCNT-FET can also convert biological signals of hORs to electrical signals with high sensitivity. By screening of hORs, hOR2T7 with high selectivity for DMMP was selected, and it was produced for development of the hOR2T7-conjugated bioelectronic nose (hOR2T7 B-nose). A hOR2T7 B-nose was able to selectively detect DMMP at a concentration of 10 fM. This shows ultrasensitive and selective performance for the detection of DMMP as a tool for sensing chemical warfare agents (CWAs), which could be used for practical applications in the field of safety.