Search

Reversed phase liquid chromatography with mass spectrometry (RPLC-MS) peptide mapping is routinely used for interrogating molecular and structural attributes such as amino acid composition, sequence variants, and post-translational modifications (PTMs) in antibody-derived therapeutics. RPLC has some limitations that often impact the analysis of certain peptides including large hydrophobic peptides, hydrophilic di-/tripeptides and glycopeptides. Capillary zone electrophoresis with mass spectrometry (CZE-MS) has great potential for peptide mapping due to high efficiency and outstanding sensitivity. In this report we demonstrate the utility of CZE-MS as an orthogonal and complementary technique to RPLC-MS for peptide mapping analyses of antibody--drug conjugates (ADCs) and their parent antibodies. This work is based on high-resolution CZE-MS separation recently developed in our group, where a mixed aqueous--organic solvent system containing N,N-dimethylacetamide (DMA) or N,N-dimethylformamide (DMF) was used to improve the separation selectivity. The results described here show several advantages of CZE-MS for the analysis of small hydrophilic di-/tripeptides, large hydrophobic peptides, glycopeptides, and hydrophobic drug-linked peptides. [ABSTRACT FROM AUTHOR]

Peptide mapping with mass spectrometry (MS) detection is a powerful technique routinely used for interrogating physicochemical properties of proteins. Peptide mapping benefits from an efficient front-end separation to increase selectivity and reduce complexity prior to MS detection. The most commonly used method for peptide mapping is based on reverse phase liquid chromatography with mass spectrometry. Capillary zone electrophoresis with mass spectrometry (CZE-MS) is an orthogonal technique with growing attention for peptide mapping of biotherapeutic proteins due to its high efficiency and sensitivity. However, that growth has been slow due to poorer peptide resolution and method robustness compared to RPLC. Here we present results from optimization of CZE-MS peptide mapping separation using mixed aqueous--aprotic dipolar solvent (N,N-dimethylacetamide (DMA) and N,N-dimethylformamide (DMF), as the background electrolyte (BGE) to improve the separation performance. Addition of DMA or DMF to the BGE impacts separation selectivity through differential change in pKa of the peptides. The CZE-MS peptide mapping method with the modified BGE produced significant improvement in resolution over the conventional CZE-MS methods. The method was evaluated with both sheathless and sheathflow CE-MS ion sources. [ABSTRACT FROM AUTHOR]

Fragmentation of monoclonal antibodies is a critical quality attribute routinely monitored to assess the purity and integrity of the product from development to commercialization. Cleavage in the upper hinge region of IgG1 monoclonal antibodies is a common fragmentation pattern widely studied by size exclusion chromatography (SEC). Capillary electrophoresis with sodium dodecylsulfate (CE-SDS) is a well-established technique commonly used for monitoring antibody fragments as well, but its comparability to SEC in monitoring hinge fragments has not been established until now. We report a characterization strategy that establishes the correlation between hinge region fragments analyzed by SEC and CE-SDS. Monoclonal antibodies with elevated hinge fragments were generated under low pH stress conditions and analyzed by SEC and CE-SDS. The masses of the fragments generated were determined by LC-MS. Electrophoretic migration of the hinge fragmentation products in CE-SDS were determined based on their mass values. Comparative assessment of fragments by SEC, and CE-SDS showed similar correlation with incubation time. This study demonstrates that CE-SDS can be employed as a surrogate technique to SEC for monitoring hinge region fragments. Most importantly, combination of these techniques can be used to obtain comprehensive understanding of fragment related characteristics of therapeutic protein products. [ABSTRACT FROM AUTHOR]

The dynamic range of capillary electrophoresis analysis is ultimately limited by molecular shot noise at low concentrations and by concentration-induced band broadening at high concentrations. We report a system that approaches these fundamental limits. A laser-induced fluorescence detector is reported that employs a cascade of four fiber-optic beam splitters connected in series to generate a primary signal and four attenuated signals, each monitored by a single-photon counting avalanche photodiode. Appropriate scaling of the signals from the five photodiodes produces a linear optical calibration curve for 5-carboxyl-tetramethylrhodamine from the concentration detection limit of 1 pM to the upper limit of 1 mM. Mass detection limits are 120 yoctomoles (70 molecules) injected into the instrument. The very-wide dynamic range instrument was used to study the metabolic products of the fluorescently labeled glycosphingolipid tetramethylrhodamine labeled GM1 (GM1-TMR) produced by single cells isolated from the rat cerebellum. [ABSTRACT FROM AUTHOR]

A fraction collector based on a drop-on-demand ink-jet printer was developed to interface capillary zone electrophoresis with a 96 well microtiter plate. We first evaluated the performance of the collector by using capillary zone electrophoresis to analyze a 1 mM solution of tetramethylrhodamine; a fluorescent microtiter plate reader was then used to detect the analyte and characterize fraction carryover between wells. Relative standard deviation in peak height was 20% and the relative standard deviation in migration time was 1%. The mean and standard deviation of the tetramethylrhodamine peak width was 5±1 s and likely limited by the 4-s period between droplet deposition. We next injected a complex mixture of DNA fragments and used real-time PCR to quantify the product in a CE-SELEX experiment. The reconstructed electrophoretic peak was 27 s in duration. Finally, we repeated the experiment in the presence of a 30-µM thrombin solution under CE-SELEX conditions; fractions were collected and next-generation sequencing was used to characterize the DNA binders. Over 25,000 sequences were identified with close matches to known thrombin binding aptamers. [ABSTRACT FROM AUTHOR]

mixture of structural isomers was separated and identified at nanomolar concentrations (~ 100 000 molecules) by incorporating capillary zone electrophoresis (CZE) with a sheath flow surfaceenhanced Raman scattering (SERS) detector. Baseline resolution was obtained from three structural isomers of rhodamine using a planar silver SERS substrate, demonstrating the utility of this approach for trace chemical analysis. [ABSTRACT FROM AUTHOR]

Label-free, chemical specific detection in flow is important for high throughput characterization of analytes in applications such as flow injection analysis, electrophoresis, and chromatography. We have developed a surface-enhanced Raman scattering (SERS) flow detector capable of ultrasensitive optical detection on the millisecond time scale. The device employs hydrodynamic focusing to improve SERS detection in a flow channel where a sheath flow confines analyte molecules eluted from a fused silica capillary over a planar SERS-active substrate. Increased analyte interactions with the SERS substrate significantly improve detection sensitivity. The performance of this flow detector was investigated using a combination of finite element simulations, fluorescence imaging, and Raman experiments. Computational fluid dynamics based on finite element analysis was used to optimize the flow conditions. The modeling indicates that a number of factors, such as the capillary dimensions and the ratio of the sheath flow to analyte flow rates, are critical for obtaining optimal results. Sample confinement resulting from the flow dynamics was confirmed using wide-field fluorescence imaging of rhodamine 6G (R6G). Raman experiments at different sheath flow rates showed increased sensitivity compared with the modeling predictions, suggesting increased adsorption. Using a 50 ms acquisition, a sheath flow rate of 180 μL/min, and a sample flow rate of 5 μL/min, a linear dynamic range from nanomolar to micromolar concentrations of R6G with a limit of detection (LOD) of 1 nM is observed. At low analyte concentrations, rapid analyte desorption is observed, enabling repeated and high-throughput SERS detection. The flow detector offers substantial advantages over conventional SERS-based assays such as minimal sample volumes and high detection efficiency. [ABSTRACT FROM AUTHOR]

Capillary isoelectric focusing tends to suffer from poor reproducibility, particularly for the analysis of complex protein samples from cellular or tissue homogenates. This poor reproducibility appears to be associated with erratic variations in electroosmotic flow. One cause of electroosmotic flow variation is degradation of the capillary coating caused by the extremely basic solution commonly used during mobilization and focusing; this degradation of the capillary coating can be reduced by employing a CAPS mobilization buffer at pH 9. Another cause of variation is protein adsorption to the capillary wall, which causes an increase in electroosmotic flow. The effects of protein adsorption can be reduced by use of surfactants in the buffer and by employing an extremely low sample loading. We report the use of CAPS mobilization buffer in combination with an ultrasensitive laser-induced fluorescence detector for the reproducible analysis of ∼2 ng of protein from a Barrett's esophagus biopsy. [ABSTRACT FROM AUTHOR]

We report an improved interface for two-dimensional capillary electrophoresis. This interface is based on capillary tubing and a Plexiglas chip, both of which were milled using a micro-dicing saw. The interface was evaluated and compared to a traditional interface design for both pseudo one-dimensional and two-dimensional capillary electrophoresis. We observe less than 70% transfer efficiency for the traditional design and greater than 90% transfer efficiency with this new interface. [ABSTRACT FROM AUTHOR]