Search

Metal-cation defects and halogen-anion defects in perovskite films are critical to the efficiency and stability of perovskite solar cells (PSCs). In this work, a random polymer, poly(methyl methacrylate-co-acrylamide) (PMMA-AM), was synthesized to serve as an interfacial passivation layer for synergistically passivating the under-coordinated Pb

High-performance perovskite/perovskite tandem solar cells require high-efficiency and stable low-bandgap perovskite subcells. State-of-the-art low-bandgap mixed tin–lead iodide perovskite solar cells exhibit either a high power-conversion efficiency or improved stability, but not both. Here we report a two-step bilayer interdiffusion growth process to simultaneously meet both requirements for formamidinium-based low-bandgap mixed tin–lead iodide perovskite solar cells. The bilayer interdiffusion growth process allows for the formation of high-quality and large-grained perovskite films with only 10 mol% volatile methylammonium. Additionally, one-dimensional pyrrolidinium perovskite was applied to passivate the perovskite film and improve the junction quality, which resulted in a carrier lifetime of 1.1 μs and an open circuit voltage of 0.865 V for our perovskite film and device with a bandgap of 1.28 eV. Our strategies enabled a power-conversion efficiency of 20.4% for low-bandgap perovskite solar cells under AM 1.5G illumination. More importantly, an encapsulated device can retain 92% of its initial efficiency after 450 h of continuous 1 sun illumination. Low-bandgap tin–lead perovskites are key to all-perovskite tandem solar cells but simultaneous improvement in efficiency and stability has proven challenging. Now, Li et al. fabricate tin–lead perovskite cells with reduced methylammonium content that are 20.4% efficient and stable under illumination for 450 h.

The Urbach energy indicating the width of the exponentially decaying sub-bandgap absorption tail is commonly used as the indicator of electronic quality of thin-film materials used as absorbers in solar cells. Urbach energies of hybrid inorganic-organic metal halide perovskites with various anion-cation compositions are measured by photothermal deflection spectroscopy. The variation in anion-cation composition has a substantial effect on the measured Urbach energy and hence the electronic quality of the perovskite. Depending upon the compositions, the Urbach energy varies from 18 to 65 meV for perovskite films with similar bandgap energies. For most of the perovskite compositions studied here including methylammonium (MA) + formamidinium (FA)-based Pb iodides, mixed Sn + Pb narrow-bandgap perovskites with low or intermediate Sn contents, and wide-bandgap FA + Cs- and I + Br-based perovskites, the correlation between the Urbach energy of the perovskite thin film and open-circuit voltage (

The synergistic effect of antibacterial and anti-inflammatory is needed to overcome the problem of wound healing difficulties. Based on the favorable antibacterial and anti-inflammatory effect of zinc ions (Zn2+) and the physicochemical properties of metal organic frameworks (MOFs), we prepared nanosized zinc-based MOF: Zn-BTC with the ability to slowly release Zn2+. In cellular levels, Zn-BTC possessed lower toxicity to fibroblasts and enhanced capacity of cell proliferation and migration. It also had good bactericidal effect on multiple drug-resistant bacteria by reducing 41.4% MRSA and 47.2% Escherichia coli. In addition, Zn-BTC also displayed the ability of lowering the expression of antioxidant genes: superoxide dismutase 1, superoxide dismutase 2 and interleukin 6, and enhancing the expression of wound healing genes: transforming growth factors-β and type I collagen. Finally, it also demonstrated that Zn-BTC could effectively improve the skin wound healing of SD rats and had no toxicity on major organs. The favorable biocompatibility, antibacterial and anti-inflammatory properties of Zn-BTC gave a new insight of designing novel MOFs for promoting skin wound healing.

Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) represents the state-of-the-art hole transport material (HTM) in inverted perovskite solar cells (PSCs), however, unsatisfied surface properties of PTAA as well as high energy disorder in the bulk film hinder the further enhancement of device performance. Herein, we strategically develop a simple small molecule 10-(4-(3,6-dimethoxy-9H-carbazol-9-yl)phenyl)-3,7-bis(4-vinylphenyl)-10H-phenoxazine (MCz-VPOZ) for in-situ crosslinking of polymer hole conductor (CL-MCz) via a facile and low-temperature cross-linking technology. The resulting polymer CL-MCz offers high energy ordering, improved electrical conductivity as well as appropriate energy-level alignment, enabling efficient charge carrier collection in the devices. Meanwhile, CL-MCz synchronously provides satisfied surface wettability and interfacial functionalization, facilitating the formation of high-quality perovskite films with fewer bulk iodine vacancies and suppressed carrier recombination. Significantly, the device with CL-MCz yields a champion power conversion efficiency of 23.9% along with an extremely low energy loss down to 0.41 eV, which represents the highest reported efficiency for non-PTAA based polymer HTMs in inverted PSCs. Furthermore, the corresponding unencapsulated devices exhibited competitive shelf-life stability under various operational stressors up to 2500 hours, reflecting high promises of CL-MCz in the scalable PSC application. This work underscores the promising potential of the cross-linking approach in preparing low-cost, stable and efficient polymer HTMs toward reliable PSCs. This article is protected by copyright. All rights reserved.

In solution-processed organic-inorganic halide perovskite films, halide-anion related defects including halide vacancies and interstitial defects can easily form at the surfaces and grain boundaries. The uncoordinated lead cations produce defect levels within the band gap, and the excess iodides disturb the interfacial carrier transport. Thus these defects lead to severe nonradiative recombination, hysteresis, and large energy loss in the device. Herein, polyacrylonitrile (PAN) was introduced to passivate the uncoordinated lead cations in the perovskite films. The coordinating ability of cyano group was found to be stronger than that of the normally used carbonyl groups, and the strong coordination could reduce the I/Pb ratio at the film surface. With the PAN perovskite film, the device efficiency improved from 21.58 % to 23.71 % and the open-circuit voltage from 1.12 V to 1.23 V, the ion migration activation energy increased, and operational stability improved.

Dehydroepiandrosterone (DHEA) has been revealed to implicate in facilitating osteoblast differentiation of human bone marrow mesenchymal stem cells (hBMSCs) and inhibiting osteoporosis (OP). However, the underlying molecular mechanism remains largely unknown. Here, we induced osteogenic differentiation of hBMSCs derived from elders using an osteogenic induction medium with or without DHEA. The results showed that osteogenic induction medium (OIM) with DHEA could significantly promote the proliferation and osteogenic differentiation of hBMSCs than OIM alone. By using a Tandem Mass Tag (TMT) labeling and liquid chromatography-tandem mass spectrometry (LC-MS/MS) technology, we screened out 604 differentially expressed proteins (DEPs) with at least one unique peptide were identified [524: OIM vs. complete medium (CM), and 547: OIM+DHEA vs. CM], among these proteins, 467 DEPs were shared in these two different comparative groups. Bioinformatic analysis revealed these DEPs are mainly enriched in metabolic pathways. Interestingly, the expression levels of the DEPs in the metabolic pathways showed a more noticeable change in the OIM+DHEA vs. CM group than OIM vs. CM group. Moreover, the protein-protein interaction (PPI) network analysis revealed that three potential proteins, ATP5B, MT-CYB, and MT-ATP6, involved in energy metabolism, might play a key role in osteogenic differentiation induced by OIM+DHEA. These findings offer a valuable clue for us to better understand the underlying mechanisms involved in osteoblast differentiation of hBMSCs caused by DHEA and assist in applying DHEA in hBMSCs-based therapy for osteogenic regeneration.

The background of Police Digital Trunking (PDT) communication network and the importance of the information construction in the emergency command system for the public security department is introducing. The technical principles and advantages of this communication network are expounding. The PDT communication network in YT area which is typically hilly terrain is used as a case. Four new signal base stations were designed using wireless signal propagation models and local parameters. The signal simulation and comparison of the original four base stations and the new four base stations are carried out. The results of wireless signal coverage, up-link and down-link signal strength simulation are obtained. This PDT network optimization scheme in this area is good to solve practical engineering problems of PDT communication network in the hilly area.

IntroductionOsteosarcoma is among the most common orthopedic neoplasms, and currently, there are no adequate biomarkers to predict its prognosis. Therefore, the present study was aimed to identify the prognostic biomarkers for autophagy-and immune-related osteosarcoma using bioinformatics tools for guiding the clinical diagnosis and treatment of this disease.Materials and MethodsThe gene expression and clinical information data were downloaded from the Public database. The genes associated with autophagy were extracted, followed by the development of a logistic regression model for predicting the prognosis of osteosarcoma using univariate and multivariate COX regression analysis and LASSO regression analysis. The accuracy of the constructed model was verified through the ROC curves, calibration plots, and Nomogram plots. Next, immune cell typing was performed using CIBERSORT to analyze the expression of the immune cells in each sample. For the results obtained from the analysis, we used qRT-PCR validation in two strains of human osteosarcoma cells.ResultsThe screening process identified a total of three genes that fulfilled all the screening criteria. The survival curves of the constructed prognostic model revealed that patients with the high risk presented significantly lower survival than the patients with low risk. Finally, the immune cell component analysis revealed that all three genes were significantly associated with the immune cells. The expressions of TRIM68, PIKFYVE, and DYNLL2 were higher in the osteosarcoma cells compared to the control cells. Finally, we used human pathological tissue sections to validate the expression of the genes modeled in osteosarcoma and paracancerous tissue.ConclusionThe TRIM68, PIKFYVE, and DYNLL2 genes can be used as biomarkers for predicting the prognosis of osteosarcoma.

The high-bandwidth feature of Free-Space Optical Communication (FSOC) is advantageous for the construction of future seamless global mobile communication networks. In order to reduce the influence of atmospheric turbulence on laser beams of FSOC system, the propagation and diffusion characteristics of laser beams in atmospheric channel are analyzed. According to the expressions of transmitter beam radius and the radius of curvature of the phase front, the collimated beam radius as a function of various wavelength of laser beam, atmospheric turbulence conditions, transmitter beam radius and spatial coherence properties are simulated. In addition, we provide a theoretical basis for the budget analysis of FSOC links, which can serve as a reference for developers to weigh the constraints of various detail parameters for maximizing the performance of optical communication systems.

Glycosylation is an important protein post-translational modification. In this process, the intermediate product, Tn antigen, arises from somatic mutations in core1β3-galactosyltransferase-specific molecular chaperone (Cosmc), which is required for the formation of active core1β3-galactosyltransferase (T-synthase). As a type of tumor-associated carbohydrate antigen, Tn antigen is mainly expressed in many human tumor cells and is absent in normal cells. Surprisingly, it is also expressed in normal activated T cells after in vitro stimulation, but the mechanism underlying its expression remains unclear. This study demonstrated that Tn antigen was expressed in activated T cells and that the percentage of positive (Tn+) cells increased and subsequently decreased within 72h after stimulation with CD3/CD28 Dynabeads, with peak expression occurring at 48h. During activation, interleukin-4 (IL-4) expression in the T-cell supernatant consistently increased with Tn+ cells, and was inversely correlated with serum interferon gamma (IFN-γ) levels. Compared with unactivated (without CD3/CD28 Dynabead stimulation) T cells, the level of T-synthase transcription in activated T cells did not significantly change, whereas T-synthase activity and Cosmc transcription significantly decreased, accompanied by a further increase in methylation of the Cosmc promoter. The results also showed that Cosmc transcription and translation decreased and then increased, and that Cosmc promoter methylation was a dynamic process during T cell activation. These data suggest that hypermethylation of the Cosmc promoter may induce the expression of Tn antigen in activated T cells.

Selection of a capital is of critical importance to security and stability of a country and consolidation of its regime. In selection of the capital in all Chinese dynasties over the past, what the governors usually take into account contained a variety of factors, such as, the strategic military position of a city, its economic development, its traffic convenience condition, its ethnic relations, etc. The same is true with other countries. Consideration of multi-factors is an inevitable route in selection of a capital. With development of the time and swift increase of population, capitals of some countries might be encountered with contradictions between population resources and environmental pressure and political functions. To resolve these contradictions, these countries, one after another, take different measures by moving their capitals elsewhere and decomposing functions. To the end of give play to the political function of a capital and maintain the integration capacity of a country, it is a must to pay attention to and deal with the issue of capital.