Search

Hepatic cell death occurs in response to diverse stimuli such as chemical and physical damage. The exposure of intracellular contents such as DNA during necrosis induces a severe inflammatory response that has yet to be fully explored therapeutically. Here, we sought means to neutralize the ability of extracellular DNA to induce deleterious tissue inflammation when drug‐induced liver injury had already ensued. DNA exposure and inflammation were investigated in vivo in drug‐induced liver injury using intravital microscopy. The necrotic DNA debris was studied in murine livers in vivo and in DNA debris models in vitro by using a positively charged chemokine‐derived peptide (MIG30; CXCL9[74‐103]). Acetaminophen‐induced liver necrosis was associated with massive DNA accumulation, production of CXC chemokines, and neutrophil activation inside the injured tissue. The MIG30 peptide bound the healthy liver vasculature and, to a much greater extent, to DNA‐rich necrotic tissue. Moreover, MIG30 bound extracellular DNA directly in vivo in a charge‐dependent manner and independently of glycosaminoglycans and chemokines. Post‐treatment of mice with MIG30 reduced mortality, liver damage, and inflammation significantly. These effects were not observed with a control peptide that does not bind DNA. Mechanistically, MIG30 inhibited the interaction between DNA and histones, and promoted the dissociation of histones from necrotic debris. MIG30 also inhibited the pro‐inflammatory effect of CpG DNA, as measured by a reduction in CXCL8 production, indicating that MIG30 disturbs the ability of DNA to induce hepatic inflammation. Conclusion: The use of DNA‐binding peptides reduces necrotic liver injury and inflammation, even at late timepoints., Marques et al. used a small chemokine‐derived positively‐charged peptide (MIG30) to neutralize the deleterious effects of extracellular DNA during drug‐induced liver injury. Treatment with MIG30 rescued mice from injury, inflammation and mortality by binding DNA avidly, dissociating it from histones and reducing the pro‐inflammatory activity of CpG DNA.

Freezing bone samples to preserve their biomolecular properties for various analyses at a later time is a common practice. Storage temperature and freeze-thaw cycles are well-known factors affecting degradation of molecules in the bone, whereas less is known about the form in which the tissue is most stable. In general, as little intervention as possible is advised before storage. In the case of DNA analyses, homogenization of the bone shortly before DNA extraction is recommended. Because recent research on the DNA yield from frozen bone fragments and frozen bone powder indicates better DNA preservation in the latter, the aim of the study presented here was to investigate and compare the chemical composition of both types of samples (fragments versus powder) using ATR-FTIR spectroscopy. Pairs of bone fragments and bone powder originating from the same femur of 57 individuals from a Second World War mass grave, stored in a freezer at - 20 °C for 10 years, were analyzed. Prior to analysis, the stored fragments were ground into powder, whereas the stored powder was analyzed without any further preparation. Spectroscopic analysis was performed using ATR-FTIR spectroscopy. The spectra obtained were processed and analyzed to determine and compare the chemical composition of both types of samples. The results show that frozen powdered samples have significantly better-preserved organic matter and lower concentrations of B-type carbonates, but higher concentrations of A-type carbonates and stoichiometric apatite. In addition, there are more differences in the samples with a low DNA degradation index and less in the samples with a high DNA degradation index. Because the results are inconsistent with the current understanding of bone preservation, additional research into optimal preparation and long-term storage of bone samples is necessary.

When decomposition of a recovered body is fairly advanced, identification based on common morphologic features is often impossible. In these cases, short tandem repeat (STR) marker genotyping has established itself as a convenient and reliable alternative. However, at very progressed stages of decomposition, postmortem tissue putrefaction processes can decrease DNA yields considerably. Hence, not all types of tissue are equally suitable for successful STR marker-based postmortem identification. Bone or dental material is often analysed in corpses with advanced decompositional changes. However, processing of these materials is very elaborate and time and resource consuming. We have therefore focused on the suitableness of various types of soft tissue swabs, where DNA extraction is easier and faster. By sampling 28 bodies at various stages of decomposition, we evaluated the suitability of different tissues for genotyping at varying degrees of physical decay. This was achieved by a systematic classification of the sampled bodies by morphological scoring and subsequent analysis of multiple tissue swabs of the aortic wall, urinary bladder wall, brain, liver, oral mucosa and skeletal muscle. In summary, we found variable degrees of suitability of different types of soft tissue swabs for DNA-based identification. Swabs of the aortic wall, the urinary bladder wall and brain tissue yielded the best results — in descending order — even at advanced levels of decay. Supplementary Information The online version contains supplementary material available at 10.1007/s00414-021-02601-3.

Elephant populations have greatly reduced mainly due to illegal poaching for their ivory. The trade in elephant products is protected by national laws and CITES agreements to prevent them from further decline. For instance, in Thailand, it is illegal to trade ivory from African elephants; however, the law allows possession of ivory from Asian elephants if permission has been obtained from the authorities. As such, means of enforcement of legislation are needed to classify the legal status of seized ivory products. Many DNA-based techniques have been previously reported for this purpose, although all have a limit of detection not suitable for extremely degraded samples. We report an assay based on nested PCR followed by DGGE to confirm the legal or illegal status of seized ivory samples where it is assumed that the DNA will be highly degraded. The assay was tested on aged ivory from which the assay was tested for reproducibility, specificity, and, importantly, sensitivity. Blind testing showed 100% identification accuracy. Correct assignment in all 304 samples tested was achieved including confirmation of the legal status of 227 highly degraded, aged ivories, thus underlining the high sensitivity of the assay. The research output will be beneficial to analyze ivory casework samples in wildlife forensic laboratories.

Forensic genotyping can be impeded by γ-irradiation of biological evidence in the event of radiological crime; that is, criminal activity involving radioactive material. Oxidative effects within the mitochondria of living cells elicits greater damage to mitochondrial DNA (mtDNA) than nuclear DNA (nuDNA) at low doses. This study presents a novel approach for the assessment of nuDNA versus mtDNA damage from a comparison of genotype and quantity data, while exploring likely mechanisms for differential damage after high doses of γ-irradiation. Liquid (hydrated) and dried (dehydrated) whole blood samples were exposed to high doses of γ-radiation (1-50 kilogray, kGy). The GlobalFiler PCR Amplification Kit was used to evaluate short tandem repeat (STR) genotyping efficacy and nuDNA degradation; a comparison was made to mtDNA degradation measured using real-time PCR assays. Each assay was normalized before comparison by calculation of integrity indices relative to unirradiated controls. Full STR profiles were attainable up to the highest dose, although DNA degradation was noticeable after 10 and 25 kGy for hydrated and dehydrated blood, respectively. This was manifested by heterozygote imbalance more than allele dropout. Degradation was greater for mtDNA than nuDNA, as well as for hydrated than dehydrated cells, after equivalent doses. Oxidative effects due to water radiolysis and mitochondrial function are dominant mechanisms of differential damage to nuDNA versus mtDNA after high-dose γ-irradiation. While differential DNA damage was reduced by cell desiccation, its persistence after drying indicates innate differences between nuDNA and mtDNA radioresistance and/or continued oxidative effects within the mitochondria.

Genetic analyses such as STR-typing are routinely used for identification purposes in forensic casework. Although genotyping techniques only require a minimum amount of DNA to provide a genetic profile, DNA quality differs not only between but also within tissues during ongoing decomposition. Initiated by a recent case where, due to the constitution of the body, preferred tissue was not available or only resulted in a partial and not usable DNA profile, the analysis of intervertebral discs as a source of DNA was considered. As the analysis of this tissue resulted in a high quality DNA profile a further study was performed in which thirty intervertebral discs dissected from bodies in different stages of decay were analyzed. All samples yielded good quality DNA in quantities suitable for STR-based amplification with no or only low degradation indices, resulting in complete genetic profiles. These results demonstrate the robustness of human intervertebral disc tissue as a source of DNA for molecular identification purposes.

Forensic and population genetics often rely on Y-chromosomal studies. Whether it is a human identification case, trace evidence examination or phylogenetic analysis, a Y-STR haplotype is an important tool in the hands of law enforcement agencies. A common obstacle in achieving satisfactory results in all of the above mentioned circumstances, is low DNA quantity and quality within samples obtained. In this study we have examined Y-STR haplotypes in 75 bone material samples, coming from different time periods. For this purpose we have chosen YFiler Plus PCR Amplification Kit (ThermoFisher Scientific) and ForenSeq Signature DNA Prep Kit (Verogen Inc.), which use two different allele calling technologies - capillary electrophoresis and Massively Parallel Sequencing respectively. Full profiles were obtained from DNA extracts with as little as 0.1896 ng (Degradation Index 1.3) (ForenSeq) and 0.0591 ng (Degradation Index 26.8) (YFiler Plus) DNA input. The results that we present in this paper show differences in amplification rates between common markers in both kits. The differences strictly reflect mean amplicon length of markers. This, however, does not seem to influence Y-haplogroup estimation results noticeably. In one sample a discordance occurred between haplotypes obtained with both methods, where a 24 allele was called in DYS390 marker by capillary electrophoresis, while for the same sample in this locus a 23 allele was shown with MPS. A reason for this is yet to be investigated. The sequence analysis revealed a significant variation between isometric alleles, especially within repetitive regions of studied Y-STR markers.

Storage conditions influence the integrity of the recoverable DNA from forensic evidence in terms of yield and quality. FTA cards are widely used in the forensic practice as their chemically treated matrix provides protection from the moment of collection to the point of analysis with current STR typing technology. In this study, we assess the recoverability and the integrity of DNA from 11-year-old saliva on FTA cards using a forensic quantitative real-time polymerase chain reaction (qPCR) commercial assay. The quality after long-term storage was investigated in order to evaluate if the FTA device could assure enough stability over time, applying some internally validated quality criteria of the STR profile. Furthermore, we used a 3D interpolation model to combine the quantitative and qualitative data from qPCR to calculate the minimum optimal DNA input (MODI) to add to the downstream PCR reaction based on the quantitative and qualitative data of a sample. According to our results, when saliva sample is properly transferred onto FTA cards and then correctly stored according to the manufacturer's instructions, it is possible to recover sufficient amounts of DNA for human identification even after more than a decade of storage at ambient temperature. Degradation affected the quality of results especially when the Degradation Index exceeds the value of 2.12, requiring modifications of the standard internal workflow to improve the genotyping quality. Above this value, the application of a "corrective factor" to the PCR normalization process was necessary in order to adjust the recommended manufacturer's PCR DNA input taking into account the degradation level. Our results demonstrated the importance to consider in predictive terms the parameters obtained with the real-time quantification assay, both in terms of quantity (DNA concentration) and of quality (DI, inhibition). Informatics predictive tools including qPCR data together with the variables of storage duration and conditions should be developed in order to optimize the DNA analysis process.

Biological samples, including skeletal remains exposed to environmental insults for extended periods of time, exhibit increasing levels of DNA damage and fragmentation. Human forensic identification methods typically use a combination of mitochondrial (mt) DNA sequencing and short tandem repeat (STR) analysis, which target segments of DNA ranging from 80 to 500 base pairs (bps). Larger templates are often unavailable as skeletal samples age and the associated DNA degrades. Single- nucleotide polymorphism (SNP) loci target shorter templates and may serve as a solution to the problem. Recently developed assays for STR and SNP analysis using a massively parallel sequencing approach, such as the ForenSeq kit (Verogen, San Diego, CA), offer a means for generating results from degraded samples as they target templates down to 60 to 170 bps. We performed a modeling study that demonstrates that SNPs can increase the significance of an identification when analyzing DNA down to an average size of 100 bps for input amounts between 0.375 and 1 ng of nuclear DNA. Observations from this study were then compared with human skeletal material results (n = 14, ninth to eighteenth centuries), which further demonstrated the utility of the ForenSeq kit for degraded samples. The robustness of the Promega PowerSeq™ Mito System was also tested with human skeletal remains (n = 70, ninth to eighteenth centuries), resulting in successful coverage of 99.29% of the mtDNA control region at 50× coverage or more. This was accompanied by modifications to a mainstream DNA extraction technique for skeletal remains that improved recovery of shorter templates.

The spleen is infrequently investigated in forensic pathology routine. Thorough examinations are performed in very specific situations such as splenic trauma (including iatrogenic trauma from cardiopulmonary resuscitation attempts), anaphylaxis-related deaths, drowning and sepsis. The purpose of this review article is to provide a general overview of available literature focusing on a few selected splenic diseases as well as available forensic investigation techniques performed on the spleen in order to summarize the most frequent situations of forensic interest in which this routinely unexplored organ may merit more extensive examination.

Often fingernails from a victim or suspect involved in a physical assault, such as murder or sexual assault, are submitted to crime laboratories for DNA testing of foreign/exogenous biological material; however, very few studies have been conducted comparing the effectiveness of different sampling methods on the removal of foreign/exogenous DNA while minimizing the fingernail endogenous DNA. In this study three different sampling methods (swabbing, PBS soak, and PrepFiler® lysis buffer soak) were compared in order to identify one that minimizes the amount of endogenous DNA removed and maximizes the amount of foreign/exogenous male DNA removed. The samples were processed using the Tecan HIDEVO150 robot in order to reduce analyst time and the DNA mixtures were interpreted using the probabilistic genotyping software STRmix™. For each sampling method the quantity of male DNA, the mixture proportions, the number of foreign/exogenous male alleles detected, the amount of DNA degradation, and the discrimination power via the likelihood ratio obtained for the foreign/exogenous male DNA donor were determined and compared. The PrepFiler® lysis buffer soak and swabbing sampling methods appear to be equally effective at removing foreign/exogenous DNA from fingernails; however, the lysis buffer soak sampling method extracts more female endogenous DNA from the fingernail and the female DNA is degraded. Marginally higher likelihood ratios were obtained for the swab samples versus the PrepFiler® lysis buffer soak samples; therefore, it was determined that the swabbing sampling method was the best sampling method for the recovery of foreign exogenous DNA from fingernails while minimizing the amount of endogenous DNA removed.

We developed a q-PCR technique that simultaneously evaluates the extent of degradation and determines the gender of a human DNA donor. QYDEG HRM is a triplex real-time PCR whose products are analysed by high-resolution melting (HRM). The system produces three amplicons: (1) transducin (beta)-like 1, Y-linked (TBL1Y) (84bp); (2) large-target sequence (DGlt) (244bp); and (3) small-target sequence (DGst) (152bp). After HRM analysis, three melting peaks are detected in male DNA samples and two in female DNA samples. An imbalance between the DGst and DGlt melting peak heights allows for the estimation of the extent of DNA degradation. For sensitivity assessment, triplicate aliquots of 0.0032 to 50ng/μL DNA were tested, denoting good linearity and reproducibility. The results also showed the analysis to be precise and accurate in the DNA range of 0.04-5ng/μL. Diverse types of DNA samples were tested: experimentally heat-degraded DNA; crime scene samples derived from casework and highly degraded samples with partial STR profiles from corpse material and mass disaster events. The results were compared with those obtained from the Plexor® and PowerQuant® commercial kits. Additionally, the quantification results of the QYDEG HRM triplex correlate well with the STR amplification that was subsequently obtained. The method is simple, cost-effective and helpful for determining the DNA integrity and the sex of a sample donor in any field where human DNA quantification is required.

We performed forensic investigations on a handkerchief containing seminal fluid deposited 100 years earlier. The aim was to verify the possibility to achieve a complete genetic profile exceeding the limit of success reached until today with a partial semen stain profile stored up to 50 years. The current forensic methods were carried out: Alternative Light Source (ALS), Prostate-Specific Antigen (PSA) Test, autosomal and Y-chromosome Short Tandem Repeats (STRs). ALS inspection was a crucial method in the success of the analysis. On a dried semen stain, fluorescence remains constant for a very long time, allowing possibility to minimize the fabric sample to analyze, in order to preserve specimen for future defense guarantees or to protect historical finding. We achieved positive results in 3 of 6 traces, PSA and DNA results were concordant, only those cuttings that tested positive for PSA yielded DNA profiles. A complete male profile was generated by AmpFlSTR Identifiler Plus and 16 loci profile by AmpFLSTR Yfiler. Considering some historical sources that attributed this handkerchief dated 1916, to a famous Italian poet, the DNA profile found on the handkerchief was compared with a living male descendant, and the comparison of the Y-STR between the two gave positive results, confirming the reliability of the outcomes. The findings achieved by the current forensic method empower the application of this methodology to other forensic cases, especially in past unresolved cases.

Single nucleotide polymorphism (SNP) profiling is an effective means of individual identification and ancestry inferences in forensic genetics. This study established a SNP panel for the simultaneous individual identification and ancestry assignment of Caucasian and four East and Southeast Asian populations. We analyzed 220 SNPs (125 autosomal, 17 X-chromosomal, 30 Y-chromosomal, and 48 mitochondrial SNPs) of the DNA samples from 563 unrelated individuals of five populations (89 Caucasian, 234 Taiwanese Han, 90 Filipino, 79 Indonesian and 71 Vietnamese) and 18 degraded DNA samples. Informativeness for assignment (In) was used to select ancestry informative SNPs (AISNPs). A machine learning classifier, support vector machine (SVM), was used for ancestry assignment. Of the 220 SNPs, 62 were individual identification SNPs (IISNPs) (51 autosomal and 11 X-chromosomal SNPs) and 191 were AISNPs (100 autosomal, 13 X-chromosomal, 30 Y-chromosomal, and 48 mitochondrial SNPs). The 51 autosomal IISNPs offered cumulative random match probabilities (cRMPs) ranging from 1.56 × 10−21 to 3.16 × 10−22 among these five populations. Using AISNPs with the SVM, the overall accuracy rate of ancestry inference achieved in the testing dataset between Caucasian, Taiwanese Han, and Filipino populations was 88.9%, whereas it was 70.0% between Caucasians and each of the four East and Southeast Asian populations. For the 18 degraded DNA samples with incomplete profiling, the accuracy rate of ancestry assignment was 94.4%. We have developed a 220-SNP panel for simultaneous individual identification and ethnic origin differentiation between Caucasian and the four East and Southeast Asian populations. This SNP panel may assist with DNA analysis of forensic casework.

The International Commission on Missing Persons (ICMP) is a treaty-based international organization with a global mandate to address the issue of missing persons. It works with governments, civil society organizations, and others, and utilizes data systems and technical assistance in forensic science. ICMP’s initial work focused on the ∼40,000 people missing in the Western Balkans from the conflicts of the 1990s. A “DNA-led” approach to large-scale DNA identification of the missing was developed, based on high-throughput autosomal STR testing of skeletal remains from mass graves and other sites, and the establishment of a regional database of DNA profiles from family members of the missing. Database pairwise and pedigree kinship searching is conducted using in-house DNA matching software, the Identification Data Management System (iDMS), providing high-certainty DNA matches that are integrated in a multi-disciplinary identification process. Anthropological guidelines for sampling skeletal remains for DNA testing are based on tens of thousands of tests from a wide range of skeletal elements, allowing for prioritization based on DNA preservation. Large-scale collection of family reference samples has been conducted, resulting in a database of more than 100,000 family reference DNA profiles across all projects and delivering family DNA match reports for more than 20,000 individuals. From the 1995 Srebrenica event, ICMP provided DNA matches for 6887 of the ∼8000 missing from that event. In assistance to justice, ICMP has provided extensive evidence and expert testimony in multiple war crimes trials, including those conducted at the ICTY. This article provides an overview of ICMP’s technical involvement over the last 17 years in areas of DNA testing and database matching, and training and capacity building projects with partners. It also touches on the development of massively parallel sequencing (MPS) strategies specifically tailored to missing persons applications.

Sample collection at the crime scene can introduce variations in DNA recovery based upon the substrate from which a sample is collected, the material of the collection device used, or the storage conditions after collection. There are many factors during this process that can degrade the sample during drying and storage, and before DNA extraction can be performed. The purpose of this study was to evaluate and compare the performance of standard cotton swab collection with the Bode BioSafe® swab, which includes both a desiccant at the swab head and proprietary compounds to prevent degradation of the sample during sample collection and preservation. Blood and touch DNA samples were collected from porous and nonporous substrates and stored at elevated temperatures to simulate accelerated time. DNA quantification and STR profile data were used to assess the performance of the swabs. BioSafe® swab collection resulted in similar DNA yields from blood samples and significantly higher DNA yields from touch samples when compared to collection with cotton swabs. BioSafe® swabs also resulted in higher DNA integrity during long-term storage, increased STR profile success and improved retention of low-level contributor alleles.

The identification of skeletal human remains, severely compromised by putrefaction, or highly deteriorated, is important for legal and humanitarian reasons. There are different tools that can help in the identification process such as anthropological and genetic studies. The success observed during the last decade in genetic analysis of skeletal remains has been possible especially due to the refinements of DNA extraction and posterior analysis techniques. However, despite these progresses, many challenges keep influencing the results of such analysis, mainly the limited amount and the degradation of the DNA recovered from badly preserved samples. By now, there is still no wide-range knowledge about post-mortem kinetics of DNA degradation. Therefore, taphonomy studies can play a key role in the reconstruction of post-mortem transformations that skeletal remains, and consequently DNA, have undergone. Thus, the goal of the present review focuses on the assessment of the literature regarding the possible effect of intrinsic (characteristics of the bone) and extrinsic (environmental) factors on the state of preservation of skeletal remains recovered in a terrestrial environment and their genetic material. The establishment of useful indicators describing the state of the remains is a key factor in order to determine their suitability for posterior biomolecular analysis.

While several studies have examined temporal DNA degradation in bones collected from terrestrial environments, studies on temporal DNA degradation in bones collected from aquatic environments are limited and mostly based on case studies. The objective of this study was to assess the impact of long-term submersion, aquatic environment, bone type and DNA extraction method on DNA quality and quantity. Bone samples (scapulae and ribs), collected every ~1000 ADD from a freshwater lake and river, underwent DNA extraction via ChargeSwitch® gDNA Plant Kit and organic phenol-chloroform methods, and DNA quantitation using both TaqMan and SYBR Green-based quantitative PCR (qPCR) methods. Results suggest that in both bone types, quality of recovered DNA (i.e., degradation index) declined significantly with increase in submersion time. Among two bone types, quality of recovered DNA from scapulae declined faster than rib samples. There was no significant difference in recovered DNA quantity between bone types, DNA extraction methods, or locations but various interactions between these variables showed significant difference. Overall, it can be concluded that DNA can be extracted from waterlogged bone in sufficient quantity to generate an STR profile up to 4000 ADD.

The VeriFiler™ Plus PCR Amplification Kit is a 6-dye multiplex assay that simultaneously amplifies a set of 23 autosomal markers (D3S1358, vWA, D16S539, CSF1PO, D6S1043, D8S1179, D21S11, D18S51, D5S818, D2S441, D19S433, FGA, D10S1248, D22S1045, D1S1656, D13S317, D7S820, Penta E, Penta D, TH01, D12S391, D2S1338, and TPOX), a quality indicator system, and two sex-identification markers. Combined, the markers satisfy the requirements of the Chinese National autosomal DNA database as well as expanded CODIS (Combined DNA Index System). The VeriFiler Plus kit was developed with an improved Master Mix which incorporates the brighter TED™ dye, and accommodates a higher sample loading volume thus allowing for increased sensitivity and enabling maximum information recovery from challenging casework samples including touch, degraded, and inhibited samples. Here, we report the results of the developmental validation study which followed the SWGDAM (Scientific Working Group on DNA Analysis Methods) guidelines and includes data for PCR-based studies, sensitivity, species specificity, stability, precision, reproducibility and repeatability, concordance, stutter, DNA mixtures, and performance on mock casework samples. The results validate the multiplex design as well as demonstrate the kit's robustness, reliability, and suitability as an assay for human identification with casework DNA samples.

Laboratory investigations were conducted to evaluate the effect of ultraviolet radiation components and solar radiation exposure as a function of time on the degradation of whole human blood DNA from the standpoint of forensic analysis. Ten μL of whole human male blood samples were exposed to UV-A, UV-B, UV-C, and solar radiation at 20 min intervals up to 120 min. Allele frequencies of 16 short tandem repeat (STR) markers were monitored by employing current forensic typing DNA techniques. The STR markers were grouped into high, medium, and low molecular weight categories. Results revealed that even 20 min exposure to 4.89 eV UV-C photons (ʎ = 254 nm) with radiation intensity of 1200 μW/cm2 would degrade whole human male blood DNA samples significantly, making them unfit for human identification due to the breakdown of high molecular weight STRs. Exposure of blood samples to 4.11 eV UV-B photons (ʎ = 302 nm) with radiation intensity of 900 μW/cm2 resulted in complete degradation of high molecular weight STRs after 60 min. Partial breakdown of medium and low molecular weight STRs started after 80 min exposure. The degradation index (DI) values appear to show that the degradation of the DNA template molecule was relatively less in the low molecular weight DNA fragments as compared with high molecular weight DNA fragments. This finding indicates that genetic profiles obtained from whole human male blood exposed to this radiation for 60 min will give inconclusive results. Samples exposed up to 120 min to 3.40 eV UV-A photons (ʎ = 365 nm) and 3.10-3.94 eV photons of solar radiation did not appear to produce appreciable degradation in any of three molecular weight STRs in the whole human blood DNA samples.

DNA deposited by individuals' hands is a routine part of forensic analysis, yet little is understood about the precise cellular contents left by handling. "Dead" skin cells known as corneocytes make up the majority of the cellular material left in touch deposits by people's hands but are known to lack nuclei, making their DNA content ambiguous. Here we measure DNA released from anucleate corneocytes following various lysis methods to determine how much DNA may be present in these cells and how best to recover it from inside the cornified envelope. We demonstrate that enhanced lysis methods using a reducing agent and longer incubation may be valuable for hand deposit samples. Corneocyte DNA can be characterized as highly degraded based on the quantification, STR profiling and fluorescence microscopy of the cells from freshly washed hands. Purification to target shorter DNA fragments is demonstrated. DNA from the washed corneocyte cells is shown to constitute the majority of recoverable DNA with these methods. We consider the use of new methods adapted to cornified cells and fragmented DNA for future research into this sample type.

Physicochemical property changes observed in a degrading bloodstain can be used to estimate its time since deposition (TSD) and provide a timestamp to the sample's age. Many of the time-dependent processes that occur as a bloodstain degrades, such as DNA fragmentation and changes in hemoglobin structure, also exhibit temperature-dependent behaviours. Previous studies have demonstrated that pairing high-resolution automated gel electrophoresis and visible absorbance spectroscopy could be used to quantify the rate of degradation of a bloodstain in relation to time and storage substrate. Our study investigates such trends with an added factor, extreme temperatures. Passive drip stains were stored in either microcentrifuge tubes or on FTA cards at either -20°C, 21°C or 40°C and tested over 11 time points spanning 15 days. For both storage substrates, the wavelength at maximum absorbance for the Soret band and the maximum absorbance of the Alpha band showed a negative trend over time suggesting that spectral shifts are informative for TSD estimates. The ratio of the maximum peak height for DNA fragments lengths of 500-1000 base pairs to 1000-5000 base pairs was the most informative DNA variable in relation to time for both substrates. Cross-validation suggested the appropriate fit of the models with the data and reasonable predictive ability. We integrated both DNA concentration and hemoglobin visible absorbance metrics using principal component analysis (PCA) into a single model. Adding the random effect of the donor to the PCA model accounted for a large portion of the variation as did storage method and temperature. Additionally, canonical correspondence showed that temperature corresponded differently to the response variables for FTA card and microcentrifuge tube samples, suggesting a substrate specific effect. This study confirms that pairing DNA concentration and hemoglobin's visible absorbance can provide insight on the effect of different environmental and storage conditions on bloodstain degradation. While the level of uncertainty surrounding TSD estimates still precludes its use in the field, this study provides a valuable framework that improves our understanding of variation surrounding TSD estimates, which will be critical to any eventual application.

The determination of the post-mortal interval (PMI) is an extremely discussed topic in the literature and of deep forensic interest, for which various types of methods have been proposed. The aim of the manuscript is to provide a review of the studies on the post-mortem DNA degradation used for estimating PMI. This review has been performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses and the PRISMA Guidelines. Several analytical techniques have been proposed to analyse the post-mortem DNA degradation in order to use it to estimate the PMI. Studies focused mainly on animal models and on particular tissues. The results have been mixed: while on the one hand literature data in this field have confirmed that in the post-mortem several degradation processes involve nucleic acids, on the other hand some fundamental aspects are still little explored: the influence of ante and post-mortem factors on DNA degradation, the feasibility and applicability of a multiparametric mathematical model that takes into account DNA degradation and the definition of one or more target organs in order to standardize the results on human cases under standard conditions.

The performance of the Precision ID Identity Panel (Thermo Fisher Scientific) was assessed on a set of 87 forensic samples with different levels of degradation for which a reference sample from the “same donor” or from a “first degree relative” was available. PCR-MPS analysis was performed with DNA input ranging from 1 ng to 12 pg and through 21–26 PCR cycles, in replicate tests, and a total number of 255 libraries were sequenced on the Ion Personal Genome Machine™ (PGM™) System. The evaluation of the molecular data allowed to set a fix threshold for locus call at 50 x which suitably worked even when low amounts of degraded DNA (12 pg) were investigated. In these analytical conditions, in fact, 25 PCR cycles allowed the genotyping of about 50 % and 35 % of the autosomal and the Y-specific markers on average, respectively, for each single amplification with a negligible frequency of drop ins (0.01 %). On the other hand, drop out artefacts reached 18–23 % when low copy number and degraded DNA samples were studied, with surviving alleles showing more than 600 reads in 2.9 % of the cases. Our data pointed out that the Precision ID Identity Panel allowed accurate typing of almost any amount of good quality/moderately degraded DNA samples, in duplicate tests. The analysis of low copy number DNAs evidenced that the same allele of a heterozygous genotype could be lost twice, thus suggesting that a third amplification could be useful for a correct genotype assignment in these peculiar cases. Using the consensus approach, a limited number of genotyping errors were computed and about 37 % of the autosomal markers was finally typed with a corresponding combined random match probability of at least 1.6 × 10−13, which can be considered an excellent result for this kind of challenging samples. In the end, the results presented in this study emphasize the crucial role of the expert opinion in the correct evaluation of artefacts arising from PCR-MPS technology that could potentially lead to genetic mistyping.

Preservation variance of soil DNA is neglected in the literature, and exceptional cases exaggerate amplification capabilities. This study sought to amplify a short mitochondrial fragment (212 bp) specific to Sus scrofa domesticus from the soil surrounding decomposing pig remains from an open-air locale. Samples collected above the body at incremental distances after 145 days of initial placement yielded pig DNA. A secondary sampling was collected in 2017, approximately 768 days after burial. Inhibition tests corroborated that pig DNA was no longer present in the soil resulting in a loss of original DNA between 145 and 768 days. The results provide evidence that genetic material leaches out radially from the source and DNA fragments longer than 200 bp do not persist in soil for a relatively short timeframe in western Montana. The conclusions support the collection of soil in crime scene investigation procedures within the first few months of decomposition.

We present the results of a comparison of likelihood ratios obtained from DNA mixture data, obtained either by a peak height model (EuroForMix) and by a discrete model, using probabilities of dropout and integrating over them (MixKin). We use the mixture data that have been published in [1] and were made publicly available. We show that, for mixtures for which replicate analyses were available in this set, there is almost no difference in weight of evidence, suggesting that the additional information in the peak heights is limited. On the other hand, for mixtures for which only a single replicate is available, the weight of evidence for true donors can be substantially higher with the peak height model, especially so for major donors and also for minor donors provided they are the only minor contributor to the mixture. False positive rates were very low with both methods, but for related non-contributors the risk of a false positive is much higher with the discrete method unless kinship is taken into account in the likelihood ratio calculation.

In mass fatality events, the need to identify large numbers of deceased persons using DNA can be a significant drain on already overburdened forensic practitioners, both in the field setting and the laboratory. The laboratory may be required to extract DNA from a variety of postmortem sample types, family or direct reference samples related to the missing, and perform matching of these results in a short period of time. While most forensic institutions are well equipped to handle both family and direct reference samples, postmortem samples such as bone or heterogeneous tissue samples can be difficult for labs to analyze. We have devised an easily deployable, efficient, and inexpensive method for collecting postmortem DNA samples on commercially available DNA preservation cards (“FTA ® ” cards). FTA ® cards are already widely used in forensic labs and are convenient for shipping due to their small volume and stability at room temperature. We evaluated the suitability of a protocol involving swabbing of incisions made on cadavers and sample deposition onto FTA ® cards over various postmortem intervals and under different environmental conditions. Each trial took place during a different point in the calendar year to evaluate the effects of seasonal weather patterns and temperature on decomposition, DNA yield, and rates of DNA degradation. To further account for the effects of seasonality (temperature and humidity), the progression of body decomposition was recorded following the Total Body Score (TBS) method [1]. DNA degradation was assessed either through STR amplification of 1.2 mm FTA punches or DNA extraction from 3.0 mm punches followed by real-time PCR quantification and STR amplification and genotyping. No consistent relationship was observed between postmortem interval and DNA degradation. Instead, the TBS score, which captures the stage of body decomposition, was shown to correlate well with DNA quantity. A TBS of 15 and below consistently yielded strong partial or full profiles (20 STR loci and Amelogenin using the PowerPlex 21 System) from all individuals from either 1.2 mm or 3.0 mm punches. Transfer of sample swabs to FTA cards is shown to be a simple and effective method for both field and laboratory operations over a range of conditions that can be evaluated by field forensic practitioners based on a body decomposition score. The approach could be beneficially integrated into mass fatality response plans.

The identification of a suspect in a degraded and unbalanced DNA mixture has been a challenge for the standard short tandem repeat polymorphisms (STR) typing. Several methods have been introduced to solve this problem, such as DIP-STR, DIP-SNP, and SNP-STR markers. In this study, we proposed DIP-microhaplotype (deletion/insertion linked a chain of SNPs) as a kind of new genetic marker to type the unbalanced and degraded DNA mixture. We established the detection method with ten DIP-microhaplotype markers including 26 SNPs using allele-specific multiplex PCR followed by SNaPshot assay. This novel compound marker allows us to detect the minor DNA with a sensitivity of 1:100 to 1:1000 in a DNA mixture of any gender. Most of the DIP-microhaplotype markers had a relatively high probability of informative alleles with an average informative value (I value) of 0.308. In all, we proposed DIP-microhaplotype as a novel type of DNA marker for the detection of minor contributor from unbalanced DNA mixtures. Due to their inherent shorter length, higher polymorphism, and sensitivity, DIP-microhaplotypes are promising markers for the examination of the degraded and unbalanced mixtures in forensic stains or clinical chimeras.

Haplotype-specific extraction (HSE) is a new field of application for the separation of mitochondrial DNA (mtDNA) mixtures and is developed to identify the mtDNA haplotypes of the contributors subsequently by sequencing. Here we show the validation of HSE with an exemplary mitochondrial DNA mixture into its individual haplotypes according to our laboratory standards. These specify several critical areas of assay performance to be tested, such as sensitivity, robustness and mixture studies comprising varying proportions of their components,degraded samples and samples of different qualities and material. Wereport the successful and unambiguous analysis of the exemplary separated mitochondrial DNA mixture under various conditions as well as simulated casework samples, which manifest as mixed nucleotide calls at single base positions previously. Here we demonstrate that the HSE assay is high sensitive, stable against degradation and applicable in a wide range of sample qualities. Based on our findings from the validation study, we believe that this assay has great potential power and may be useful for distinguishing among the mtDNA of individuals and their geographical origin in mixed DNA samples.

Short Tandem Repeat (STR) genotyping is currently the primary DNA-based method for human identification, however it can have limited success when applied to degraded human remains. Massively parallel sequencing (MPS) provides new opportunities to obtain genetic data for hundreds of loci in a single assay with higher success from degraded samples. However, due to the extra requirement for specialised equipment, expertise and resources, routine use of MPS may not be feasible or necessary for many forensic cases. Here we describe the development of a mini-multiplex SNaPshot screening tool (Miniplex) for human samples which allows the qualitative comparison of short mitochondrial and nuclear DNA targets, as well as the interrogation of biogeographic ancestry, lineage, and phenotype single nucleotide polymorphisms (SNPs). This tool is useful to triage samples based on sample quality prior to downstream identification workflows and provides broad biological profile data for intelligence purposes.

This study introduces a newly developed in-house SNaPshot single-base extension (SBE) multiplex assay for forensic single nucleotide polymorphism (SNP) genotyping of fresh and degraded samples. The assay was validated with fresh blood samples from four different populations. In addition, altogether 24 samples from skeletal remains were analyzed with the multiplex. Full SNP profiles could be obtained from 14 specimens, while ten remains showed partial SNP profiles. Minor allele frequencies (MAF) of bone samples and different populations were compared and used for association of skeletal remains with a certain population. The results reveal that the SNPs of the bone samples are genetically close to the Pathan population. The findings show that the new multiplex system can be utilized for SNP genotyping of degraded and forensic relevant skeletal material, enabling to provide additional investigative leads in criminal cases.

The GlobalFiler™ PCR Amplification Kit is a single multiplex assay that amplifies a set of 24 markers, which encompass the European Standard Set and CODIS (Combined DNA Index System) recommended composite set of loci. In addition to more loci and a 6-dye chemistry format, the Master Mix has been formulated to allow higher sample loading volume for trace DNA samples. The GlobalFiler™ Kit has been optimized to deliver high performance on casework samples, while also delivering fast thermal cycling, with an amplification time of approximately 80 min. Here, we report the results of the developmental validation study which followed the SWGDAM (Scientific Working Group on DNA Analysis Methods) guidelines and includes data for PCR-based studies, sensitivity, species specificity, stability, precision, reproducibility and repeatability, concordance, stutter, DNA mixtures, and performance on mock casework samples. The results validate the multiplex design as well as demonstrate the kit’s robustness, reliability, and suitability as an assay for human identification with casework DNA samples. Electronic supplementary material The online version of this article (10.1007/s00414-018-1817-5) contains supplementary material, which is available to authorized users.