Search

The dimensional characterization of archaeological fragment is a very complex operation and could prove to be useful for identifying the presence of standard attributes in the ceramics found from a specific archaeological site, or for making comparisons and analysis of similarities or for studying ancient technologies used for manufacture of objects. The dimensional analysis of the fragments is now carried out manually with traditional measuring devices. Typically, the results obtained are inaccurate and non-repeatable measurements. This paper focuses on the dimensional characterization of a specific geometric class of features: the constant radius swept features (called here CRS features). Several archaeological features, such as rims, bases, decorative motifs, processing marks and grooves are referable from a geometric point of view to the class of CRS features. These are detail features, which may be very interesting for the investigation of some aspects related to the historical-archaeological classification of the find. CRS features are often found on worn, damaged (e.g. chipped) or fragmented objects; they are frequently characterized, from a geometric point of view, by free form surfaces and by a limited cross sectional extension. In some cases, CRS features can be of axially symmetrical geometry: this occurs quite frequently in the case of archaeological pottery. For all these reasons, it is often difficult to apply traditional manual methods for the quantitative dimensional characterization of CRS features. This paper describes an original methodology for the measurement of CRS features acquired by scanning technologies. The algorithmic implementation of this methodology, consisting of a suitable processing of the feature nodes, allows to carry out automatically the dimensional characterization of the feature.

An extensive experimental work has been made in order to analyze the structure of the spray of a large-angle single-hole high-pressure swirl injector for direct-injection spark-ignited (DISI) gasoline engines. Spatial and temporal evolution measurements of the spray have been carried out in an optically accessible vessel. The spray has been lighted by an 80 mm thickness and 12 ns duration pulsed laser sheet, generated by a 532 nm Nd-YAG laser, both along the spray axis and in cross sections perpendicularly to it. The scattered light has been collected at 90\mD from the laser sheet direction by a digital CCD camera with a frame grabber synchronized to the single-shot injection command and the laser start pulse. A digital image processing system has allowed analyzing the images collected by the CCD camera. It has been possible to visualize the formation and the spatial and temporal evolution of the initial liquid slug (pre-spray) and of the hollow-cone and solid-cone stray structure. Many changes in the internal spray structure at different distances from the nozzle have been observed.