Search

The Deep Tunnel Sewerage System (DTSS) is aimed at providing a robust and efficient means of catering to Singapore's used-water needs. DTSS2 is the second phase of this project, comprising an approximately 30-km long South Tunnel, a 10-km long Industrial Tunnel, 60-km of Link Sewers and a new Water Reclamation Plant integrated with a NEWater facility. In contrast with tunnels designed to store overflows in combined sewer systems, the DTSS tunnels convey used-water all the time from Singapore's separated system. This paper describes hydraulic analyses that were conducted during the feasibility study and preliminary design. The topics covered include hydraulic modelling of the entire system with the main goal of ensuring system resilience, air management to avoid odours at ground level, and isolation of tunnel section using gates for potential maintenance or repair. The resilience analyses concentrated on the system functionality in case of a failure, to ensure that used-water can be safely conveyed to a treatment plant. The air management system included several odour control facilities and air jumpers to avoid escape of odorous air from the system and the isolation gates requires detailed hydraulic analyses to cater to the high heads involved.

International audience; The SBAS L1 signal was designed in the late 90s in order to provide ranging plus integrity and correction data from Geo-stationary satellites to the only available core GNSS constellation and signal at that time, GPS L1 C/A. The SBAS L1 signal design was specifically optimized for a well determined set of system characteristics of that epoch: GPS constellation number of satellites, satellites atomic clock offset and drift characteristics at that epoch, GPS L1 C/A signal selectivity availability (SA), targeted approach procedures with vertical guidance (APV I), etc [1][2]. Therefore, the signal characteristics such as message content, implemented channel code, number of channel components, useful bit rate, etc., were selected accordingly to the fulfillment of these needs [1][2]. Nowadays, the majority of these system characteristics/targets have changed or evolved: SA has been disabled, new atomic clocks are much more stable than the old ones, and approaches with vertical guidance with a decision height down to 200 ft (LPV 200) are targeted. Moreover, a new GNSS signal in the L5 band, GPS L5, has been designed specifically for civil aviation requirements. Finally, more core GNSS constellations (with its own civil aviation oriented signals such as GALILEO E5) are being and will be deployed in the upcoming years. Therefore, the design of a new SBAS signal, called L1/L5, which includes the future multi-constellation horizon, the advantages provided by the new L5 civil oriented signals exploitation and which takes into account all the system characteristics/targets evolutions is mandatory.

The purpose of the present study was to evaluate the efficacy of a guided bone regeneration (GBR) procedure prior to implant placement and the long-term outcome of the inserted implants.Prior to dental implant placement, GBR procedure was performed on 14 patients (mean age 48 years) using a synthetic hydroxyapatite (HA) spacer under a collagen membrane. After a mean healing period of 8 months, bone biopsies were obtained during the placement of 14 implants. The specimens were processed for histology without demineralization in order to assess bone quality and quantity of the regenerated bone.Both the bone density and the resorption degree of HA particles were relatively varied between samples. The different phenotypes of osteoclasts and multinucleated giant cells and the individual host response could partially explain the unpredictable results in terms of bone remodeling and biomaterial resorption. However, the presence of HA particles in the regenerated bone had no influence on the osseointegration of implants presenting a success rate of 86% after a 7-year observation period.These results confirm the possibility of regenerating bone by means of bioabsorbable materials, assuring at the same time the long-term success for implants inserted in regenerated sites.

Biomass burning, in a broad sense, encompasses different burning practices, including open and confined burnings, and different types of vegetation. Emission factors of gaseous or particulate trace compounds are directly dependent both on the fuel type and the combustion process. Emission factors are generally calculated by stoichiometric considerations using the carbon mass balance method, applied either to combustion chamber experiments or to field experiments based on ground-level measurements or aircraft sampling in smoke plumes. There have been a number of experimental studies in the last 10 years to investigate wildfires in tropical, temperate, or boreal regions. This article presents an overview of measurement methods and experimental data on emission factors of reactive or radiatively active trace compounds, including trace gases and particles. It focuses on fires in tropical regions, that is, forest and savanna fires, agricultural burns, charcoal production, use of fuelwood, and charcoal combustion.

A new raw wastewater influent pumping station was designed for the Calumet Water Reclamation Plant in Chicago. The new station could not be designed to be in full compliance with design guidelines of the Hydraulic Institute due to site constraints. Proper operation of the pumping station and optimum operational flexibility are goals for the successful long term performance of the new station. A physical model study was used to identify deficiencies in the original design relative to flow characteristics. The model enabled development of design modifications to address hydraulic flow deficiencies. The optimized design resulted in pump approach flow conditions that provide proper pump performance under a wide range of varying water levels and different combinations of operating pumps and screen channels. Other benefits of the model included improvement in pump efficiency, lack of air entrainment, decreased pump wear, and decreased scour of concrete surfaces. Optimized design also results in operation and maintenance cost savings which, in the long run, will greatly surpass the cost of the physical model study. The required elements to optimize the performance were integrated with the design of the facility, thereby avoiding potentially costly retrofits if the deficiencies had not been mitigated prior to construction.

This paper reports the implementation of a five species point defects diffusion model in three dimensions and the various numerical issues associated with it. The results obtained for a 3-dimensional simulation of a rapid thermal annealing step involved in the manufacturing of a MOS transistor are presented.

The aim of this multicenter study was to evaluate cumulative success and survival rates of ITI implants after 7 years. A complete medical report was obtained for all 440 patients enrolled in this investigation, which involved 10 different private practices. The 1,022 consecutively placed implants were distributed between completely edentulous, partially edentulous, and single-tooth replacement cases. During the annual follow-up visit, each implant was examined both clinically and radiographically using predefined success criteria. The cumulative survival and success rates were calculated for all implants. Implant subgroups were defined according to the medical history of the patients or pooled according to various indications, locations, implant designs, or implant lengths. In each subgroup, the related cumulative success rate was statistically compared to the global cumulative success rate. Fifteen implants (1.4%) were regarded as early failures, and at the end of the follow-up, the global failure rate reached 6.6%; 30 implants (3%) were lost to follow-up. At 5 years, the cumulative survival rate was 95.4%; this declined to 92.2% at 7 years. The weakest success rates were observed for implants placed in older patients, periodontally treated patients, and completely edentulous arches. Conversely, cumulative success rates that were significantly above average were observed for patients between 40 and 60 years old without pathology, implants placed after bone regeneration, solid-screw implants, implants placed in edentulous spaces, and implants placed as single-tooth replacements. This investigation has demonstrated that in these 10 private practice settings, the success rate for ITI implants remained high for up to 5 years and declined slightly between 5 and 7 years. It should be noted that in later year intervals, a relatively small number of implants remained for the analysis of cumulative success rates.

In this report, the problems of insufficient bone and soft tissue after extraction of maxillary incisors were addressed concurrently prior to endosseous implant placement, by combining the use of a diphenylphosphorylazide-cross-linked Type I collagen membrane and a resorbable space-making biomaterial composed of 200-micron porous hydroxyapatite granules blended in Type I collagen and chondroitin-4-sulfate. Upon flap reflection 8 months postsurgery, the horizontal deficiencies were almost completely resolved, membranes completely resorbed and the defects filled with hard, bonelike tissue, with a few superficial hydroxyapatite granules. Histologic evaluation of the bone biopsies obtained at the implantation sites revealed dense, well-reconstructed alveolar bone with a few traces of hydroxyapatite granules that had been completely resorbed. Tomodensitometric evaluation indicated that bone regeneration ranged from 14% to 58%, with an average bone gain of 29.77%. Four nonsubmerged ITI titanium implants placed in the augmented bone have been in function for more than 5 years, with no clinical or radiographic signs of hard or soft tissue breakdown. Bacterial sampling at dental sites with periodontitis 1 month prior to periodontal therapy and at implant sites for up to 30 months demonstrated rapid colonization of implant surfaces by periodontopathogens without causing any detrimental effect to implant integration.

This study, confined to non-smokers, evaluated guided-tissue regeneration in deep 2-wall intrabony defects using a diphenylphosphorylazide-cross-linked bovine type I collagen membrane supported by a hydroxyapatite/collagen/chondroitin-sulfate spacer in 43 adult periodontitis (AP) and 14 rapidly progressive periodontitis (RPP) patients, no more than 1 defect being randomly selected for each patient. Before surgery and 6 months after surgery, plaque (PI) and sulcus bleeding (SBI) indices, probing pocket depths (PPD), gingival margin locations (GML) and probing attachment levels (PAL) were recorded. During the post-surgical period, the biomaterials were well tolerated in all patients and PI and SBI were kept at a low level. Following therapy, there was a significant gain in PAL (4.2 mm for AP; 3 mm for RPP) and reduction in PPD (6.1 mm for AP; 4.7 mm for RPP) for both groups of patients (p < 0.05). A significantly greater gain in PAL and reduction in PPD were observed for AP compared to RPP patients (p < 0.05). The change in GML was not statistically different between groups (1.8 mm for AP; 1.6 mm for RPP). It is concluded that the combined use of a diphenylphosphorylazide-cross-linked bovine type-I collagen membrane, supported by a hydroxyapatite/collagen/chondroitin-sulfate spacer, is beneficial in improving PAL and reducing PPD in 2-wall intrabony defects in both AP and RPP patients during the quiescent phase of the disease, with statistically better results for the former group. However, longer observation periods are necessary to evaluate the stability of the improvements obtained by this combined treatment approach between and for each group of patients.

This study, confined to non-smokers, evaluated guided tissue regeneration using a diphenylphosphorylazide-cross-linked bovine type I collagen membrane in deep 3-wall intrabony defects in 52 adult periodontitis (AP) and 16 rapidly progressive periodontitis (RPP) patients, previously treated for the acute phase of the disease, no more than one defect being randomly selected for each patient. Before surgery and 6 months after surgery, plaque (PI) and sulcus bleeding (SBI) indices, as well as probing pocket depths (PPD), gingival margin locations (GML) and probing attachment levels (PAL) were recorded. During the post-surgical period, the membranes were very well tolerated in all patients and PI and SBI were kept at a low level. 6 months post-surgical, there was a significant gain in PAL (3.6 mm for AP: 2.6 mm for RPP) and reduction in PPD (5.5 mm for AP; 4.1 mm for RPP) for both groups of patients (p