Search

BACKGROUND: Blood components that appear hemo-lyzed are discarded. However, visual inspection is subjec-tive and criteria for excessive hemolysis are poorly defined. STUDY DESIGN AND METHODS: Packed RBCs (10 CPDA-1, 10 Adsol) were collected. Half of each unit was leukoreduced. Plasma Hb was measured and compared in segments and units by three methods: 1) a HemoCue Plasma/Low Hb Photometer system; 2) a tetramethyl-benzidine (TMB) chemical method, and 3) a free Hb visual comparator. RESULTS: Visual assessment tended to overestimate hemolysis. Chemical methods were comparable (r2= 0.894; HemoCue = 0.043 +[0.770]× TMB; n = 400; range, 0.01-0.5 g/dL), although the mean plasma Hb (g/dL) for the HemoCue method was higher than that of the TMB method (0.12 vs. 0.10 g/dL, respectively; p < 0.001). No units would have been discarded based on a hemolysis level of at least 0.6 g/dL (approx. 1%) if measured by a chemical method. However, 50 percent of CPDA-1 and 10 percent of Adsol units would have been discarded if only visual criteria were used. Leukoreduction did not increase plasma Hb levels. Discrepancies in plasma Hb levels were noted between units and their corresponding segments. CONCLUSION: Visual assessment of hemolysis can result in unnecessary wastage of blood components. HemoCue offers an alternative, objective method to assess plasma Hb in the setting of blood collection and processing facilities for routine quality control and process validation, and may aid in the development of objective criteria for excessive hemolysis in blood components.

Blood components that appear hemolyzed are discarded. However, visual inspection is subjective and criteria for excessive hemolysis are poorly defined.Packed RBCs (10 CPDA-1, 10 Adsol) were collected. Half of each unit was leukoreduced. Plasma Hb was measured and compared in segments and units by three methods: 1) a HemoCue Plasma/Low Hb Photometer system; 2) a tetramethyl-benzidine (TMB) chemical method, and 3) a free Hb visual comparator.Visual assessment tended to overestimate hemolysis. Chemical methods were comparable (r(2)= 0.894; HemoCue = 0.043 +[0.770]x TMB; n = 400; range, 0.01-0.5 g/dL), although the mean plasma Hb (g/dL) for the HemoCue method was higher than that of the TMB method (0.12 vs. 0.10 g/dL, respectively; p0.001). No units would have been discarded based on a hemolysis level of at least 0.6 g/dL (approx. 1%) if measured by a chemical method. However, 50 percent of CPDA-1 and 10 percent of Adsol units would have been discarded if only visual criteria were used. Leukoreduction did not increase plasma Hb levels. Discrepancies in plasma Hb levels were noted between units and their corresponding segments.Visual assessment of hemolysis can result in unnecessary wastage of blood components. HemoCue offers an alternative, objective method to assess plasma Hb in the setting of blood collection and processing facilities for routine quality control and process validation, and may aid in the development of objective criteria for excessive hemolysis in blood components.

The radiopacity of intermediate restorative materials should be sufficient to enable the clinician to distinguish the material from normal and decalcified tooth structure. The purpose of this study was to determine the relative radiopacities of intermediate restorative materials, including a newly introduced high-viscosity, self-cured, condensable glass ionomer material. Radiographs were made of six intermediate restorative materials: two reinforced zinc oxide-eugenol materials (IRM and Zinroc), a conventional glass ionomer material (Ketac-fil), a synthetic resin material (Cavit), a eugenol-free zinc oxide material (Tempit), and a new, general-purpose, condensable glass ionomer material (Fuji IX-GP). Optical density was measured using a densitometer. The optical density of dentin and enamel were used for radiographic comparison. Statistical analysis revealed significant differences among materials: Cavit = IRM = TempitZinroc = Fuji IX-GPKetac-fil = enameldentin (whereindicates a statistical difference at por = 0.05). Although not as radiopaque as some other intermediate materials tested, the radiopacity of Fuji IX-GP appears sufficient to aid diagnosis.