109 results on '"Dörfel, I."'
Search Results
2. Microstructure of Bare and Sol–Gel Alumina-Coated Nickel-Base Alloy Inconel 625 After Long-Term Oxidation at 900 °C
3. Thin Sol–Gel Alumina Coating as Protection of a 9% Cr Steel Against Flue Gas Corrosion at 650 °C
4. Comprehensive characterization of ball-milled powders simulating a tribofilm system
5. Microstructure and Chemical Composition of Fe-Cr Alloy Tempered in High Temperature and Atmosphere Containing Ar-SO2
6. Microstructure, smoothening effect, and local defects of alumina sol-gel coatings on ground steel
7. Tribological performance of titanium samples oxidized by fs-laser radiation, thermal heating, or electrochemical anodization
8. Influence of a sol–gel alumina coating on oxidation of X20CrMoV12-1 in air up to 650 °C
9. Corrosion of uncoated and alumina coated steel X20CrMoV12-1 in H2O–CO2–O2 and air at 600 °C
10. Diffusion of Cr, Fe, and Ti ions from Ni-base alloy Inconel-718 into a transition alumina coating
11. Differences between films and monoliths of sol–gel derived aluminas
12. Phase formation in 6060/4043 aluminum weld solidification
13. A comprehensive microscopic study of third body formation at the interface between a brake pad and brake disc during the final stage of a pin-on-disc test
14. Influence of sol–gel derived alumina coatings on oxide scale growth of nickel-base superalloy Inconel-718
15. Sol–gel derived alumina layers on nickel-base superalloy Inconel-718 (IN-718)
16. Alumina Coatings as Protection against Corrosive Atmosphere
17. Microstructure of sol–gel derived corundum containing coatings
18. Nanocrystalline CaF 2 particles obtained by high-energy ball milling
19. The thermally induced transformation of pseudoboehmite gels—a comparison of the effects of corundum seeding and iron doping
20. Purification of single walled carbon nanotubes by thermal gas phase oxidation
21. Preparation of thin polycrystalline silicon films on glass by aluminium-induced crystallisation—an electron microscopy study
22. Microstructural characterization of binary and ternary hard coating systems for wear protection Part II: Ti(CN) PACVD coatings
23. Microstructural characterization of binary and ternary hard coating systems for wear protection. Part I: PVD coatings
24. Thin Sol–Gel Alumina Coating as Protection of a 9% Cr Steel Against Flue Gas Corrosion at 650 °C
25. Transmission electron microscopy study of rapid thermally annealed Pd/Ge contacts on In0.53Ga0.47As.
26. Microstructure, smoothening effect, and local defects of alumina sol-gel coatings on ground steel
27. Solidification of GTA aluminum weld metal: Part 1 - Grain morphology dependent upon alloy composition and grain refiner content
28. Qualitative und quantitative Analysen dünner Funktionsschichten für das Kleben durch XPS-, AES-, REM- und TEM-Untersuchungen
29. Results of Texture Simulation in b.c.c. Materials
30. Alumina Coatings as Protection against Corrosive Atmosphere
31. MICROSTRUCTURE AND CHEMICAL COMPOSITION OF Fe-Cr ALLOY TEMPERED IN HIGH TEMPERATURE AND ATMOSPHERE CONTAINING Ar-SO2.
32. Structural characterization of a coarsegrained transparent silicon carbide powder by a combination of powder diffraction techniques
33. Biological response to micron- and nanometer-sized particles known as potential wear products from artificial hip joints: Part I: Selection and characterization of model particles
34. Mechanical Activation of α-AlF3: Changes in Structure and Reactivity
35. Biological response to micron‐ and nanometer‐sized particles known as potential wear products from artificial hip joints: Part II: Reaction of murine macrophages to corundum particles of different size distributions
36. Al2O3-Coatings after Long-Term Heat Treatment - A TEM-Study
37. Nanocrystalline CaF2 particles obtained by high-energy ball milling
38. Corrosion Books: High Resolution Imaging and Spectrometry of Materials. By: F. Ernst, M. Rühle ‐ Materials and Corrosion 11/2003
39. TEM Study of Wear Debris of Brake Linings
40. Wear Engineering Oxides/Antiwear Oxides©
41. Electron microscopic characterization of reactively sputtered ZnO films with different Al-doping levels
42. Wear engineering oxides/anti-wear oxides
43. XPS and XTEM study of AlN formation by N+2 implantation of aluminium
44. TEM-Untersuchungen der Randzonenschädigung von Aluminiumoxidkeramiken nach Schleifbearbeitung
45. Microscopic characterization of microcrystalline silicon thin films
46. Tribological Induced Microstructural Changes in Subsurface Layers of Si3N4-Based Materials
47. Synthesis of Si3 N4 And Si3 N4 -SiC Powders by an RF-Induction Plasma
48. Results of texture simulation in b.c.c. materials.
49. Synthesis of Si3 N4 And Si3 N4 -SiC Powders by an RF-Induction Plasma
50. Solidification of GTA Aluminum Weld Metal: Part I - Grain Morphology Dependent upon Alloy Composition and Grain Refiner Content.
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.