Search

The use of Autonomous Surface Vehicles, equipped with water quality sensors and artificial vision systems, allows for a smart and adaptive deployment in water resources environmental monitoring. This paper presents a real implementation of a vehicle prototype that to address the use of Artificial Intelligence algorithms and enhanced sensing techniques for water quality monitoring. The vehicle is fully equipped with high-quality sensors to measure water quality parameters and water depth. Furthermore, by means of a stereo-camera, it also can detect and locate macro-plastics in real environments by means of deep visual models, such as YOLOv5. In this paper, experimental results, carried out in Lago Mayor (Sevilla), has been presented as proof of the capabilities of the proposed architecture. The overall system, and the early results obtained, are expected to provide a solid example of a real platform useful for the water resource monitoring task, and to serve as a real case scenario for deploying Artificial Intelligence algorithms, such as path planning, artificial vision, etc.

Quantum computing has been on the rise in recent years, evidenced by a surge in publications on quantum software engineering and testing. Progress in quantum hardware has also been notable, with the introduction of impressive systems like Condor boasting 1121 qubits, and IBM Quantum System Two, which employs three 133-qubit Heron processors. As this technology edges closer to practical application, ensuring the efficacy of our software becomes imperative. Mutation testing, a well-established technique in classical computing, emerges as a valuable approach in this context. In our paper, we aim to introduce QCRMut, a mutation tool tailored for quantum programs, leveraging the inherent Quantum Circuit structure. We propose a randomised approach compared to previous works with exhaustive creation processes and the capability for marking immutable positions within the circuit. These features facilitate the preservation of program structure, which is crucial for future applications such as metamorphic testing.

Most deep learning models of multiclass arrhythmia classification are tested on fingertip photoplethysmographic (PPG) data, which has higher signal-to-noise ratios compared to smartwatch-derived PPG, and the best reported sensitivity value for premature atrial/ventricular contraction (PAC/PVC) detection is only 75%. To improve upon PAC/PVC detection sensitivity while maintaining high AF detection, we use multi-modal data which incorporates 1D PPG, accelerometers, and heart rate data as the inputs to a computationally efficient 1D bi-directional Gated Recurrent Unit (1D-Bi-GRU) model to detect three arrhythmia classes. We used motion-artifact prone smartwatch PPG data from the NIH-funded Pulsewatch clinical trial. Our multimodal model tested on 72 subjects achieved an unprecedented 83% sensitivity for PAC/PVC detection while maintaining a high accuracy of 97.31% for AF detection. These results outperformed the best state-of-the-art model by 20.81% for PAC/PVC and 2.55% for AF detection even while our model was computationally more efficient (14 times lighter and 2.7 faster).

Surface Acoustic Waves (SAW) have been used frequently in spintronic applications, mostly to decrease the magnetic field or the electric current required to move magnetic domain walls (DW). Because the SAW cannot achieve magnetic switching without the assistance of a magnetic field or a current, for a marginal improvement in the energy required for the magnetic switching, the device gains in complexity, making it impractical. In this work, we report a mechanism that allows a transfer of linear momentum from the acoustic wave to the magnetic domain wall. Experimentally we show that, using the appropriate dimensions of the magnetic strip, the SAW can move the DW in the same direction as the traveling SAW. With the help of micromagnetic simulations, we reveal a complex yet direct mechanism that allows the SAW to push the DW in the same direction of its travel, even without any external field or currents. The DW can reach velocities in the range of 100 m/s and at a very small energetic cost, equivalent to using a current density of $\sim 5 \cdot 10^4 A/cm^2$ if the movement was triggered by spin transfer. This new mechanism opens the door to designing innovative spintronic devices where the magnetization can be controlled exclusively by an acoustic wave., Comment: 11 pages, 5 figures. Submitted to Nature Communications

Spin waves, known for their ability to propagate without the involvement of moving charges, hold immense promise for on-chip information transfer and processing, offering a path toward post-CMOS computing technologies. This study investigates the potential synergy between propagating Damon-Eshbach spin waves and voltage-controlled magnetization in the pursuit of environmentally sustainable computing solutions. Employing micromagnetic simulations, we assess the feasibility of utilizing spin waves in DE mode in conjunction with localized voltage-induced alterations in surface anisotropy to enable low-energy logic operations. Our findings underscore the critical importance of selecting an optimal excitation frequency and gate width, which significantly influence the efficiency of the phase shift induced in propagating spin waves. Notably, we demonstrate that a realistic phase shift of 2.5$\left[ \pi \ \text{mrad}\right]$ can be achieved at a Co(5nm)/MgO material system via the VCMA effect. Moreover, by tuning the excitation frequency, Co layer thickness, gate width, and the use of a GdO\textsubscript{x} dielectric, we illustrate the potential to enhance the phase shift by a factor of 200 when compared to MgO dielectrics. This research contributes valuable insights towards developing next-generation computing technologies with reduced energy consumption.

Loss allocation of the three different components (conductor, sheaths and armor) of solidly bonded three-core separated lead-sheathed armored cables, frequently employed in offshore wind farms, is challenging due to the lack of accurate enough analytical expressions in the IEC standard. Also, loss allocation through experimental tests leads to inaccurate results since it is based on questionable assumptions. This paper improves both the IEC formulae and experimental methods by means of different analytical corrections in the conductor and sheath loss expressions. To this aim, an ad hoc application interface (Virtual Lab) based on 3D numerical simulations (finite element method) has been developed. This tool virtualizes and automates different test setups to emulate, in few seconds, the most employed experimental procedures in this type of cable. The analytical corrections have been derived from an in-depth analysis of a first set of 368 cables, ranging from 30 to 275 kV. The new loss expressions were successfully applied to a second set of 645 armored cables of quite diverse features (voltages from 10 to 275 kV, sections and dimensional parameters), hence bringing a general framework for any kind of three-core armored cable.

Managing open-source software (OSS) projects requires managing communities of contributors. In particular, it is essential for project leaders to understand their community's diversity and turnover. We present CommunityTapestry, a dynamic real-time community dashboard, which presents key diversity and turnover signals that we identified from the literature and through participatory design sessions with stakeholders. We evaluated CommunityTapestry with an OSS project's contributors and Project Management Committee members, who explored the dashboard using their own project data. Our study results demonstrate that CommunityTapestry increased participants' awareness of their community composition and the diversity and turnover rates in the project. It helped them identify areas of improvement and gave them actionable information.

Magnetic skyrmions in thin films with perpendicular magnetic anisotropy are promising candidates for magnetic memory and logic devices, making the development of ways to transport skyrmions efficiently and precisely of significant interest. Here, we investigate the transport of skyrmions by surface acoustic waves (SAWs) via several modalities using micromagnetic simulations. We show skyrmion pinning sites created by standing SAWs at anti-nodes and skyrmion Hall-like motion without pinning driven by travelling SAWs. We also show how orthogonal SAWs formed by combining a longitudinal travelling SAW and a transverse standing SAW can be used for the 2D positioning of skyrmions. Our results also suggest SAWs offer a viable approach to the transport of multiple skyrmions along multichannel racetrack.

In this work, we propose and evaluate an inexpensive and CMOS-compatible method to locally apply strain on a Si/SiOx substrate. Due to high growth temperatures and different thermal expansion coefficients, a SiN passivation layer exerts a compressive stress when deposited on a commercial silicon wafer. Removing selected areas of the passivation layer alters the strain on the micrometer range, leading to changes in the local magnetic anisotropy of a magnetic material through magnetoelastic interactions. Using Kerr microscopy, we experimentally demonstrate how the magnetoelastic energy landscape, created by a pair of openings, in a magnetic nanowire enables the creation of pinning sites for in-plane vortex walls that propagate in a magnetic racetrack. We report substantial pinning fields up to 15 mT for device-relevant ferromagnetic materials with positive magnetostriction. We support our experimental results with finite element simulations for the induced strain, micromagnetic simulations and 1D model calculations using the realistic strain profile to identify the depinning mechanism. All the observations above are due to the magnetoelastic energy contribution in the system, which creates local energy minima for the domain wall at the desired location. By controlling domain walls with strain, we realize the prototype of a true power-on magnetic sensor that can measure discrete magnetic fields or Oersted currents. This utilizes a technology that does not require piezoelectric substrates or high-resolution lithography, thus enabling wafer-level production.

Ferromagnets generate an anomalous Hall effect even without the presence of a magnetic field, something that conventional antiferromagnets cannot replicate but noncollinear antiferromagnets can. The anomalous Hall effect governed by the resistivity tensor plays a crucial role in determining the presence of time reversal symmetry and the topology present in the system. In this work we reveal the complex origin of the anomalous Hall effect arising in noncollinear antiferromagnets by performing Hall measurements with fields applied in selected directions in space with respect to the crystalline axes. Our coplanar magnetic field geometry goes beyond the conventional perpendicular field geometry used for ferromagnets and allows us to suppress any magnetic dipole contribution. It allows us to map the in-plane anomalous Hall contribution and we demonstrate a 120$^\circ$ symmetry which we find to be governed by the octupole moment at high fields. At low fields we subsequently discover a surprising topological Hall-like signature and, from a combination of theoretical techniques, we show that the spins can be recast into dipole, emergent octupole and noncoplanar effective magnetic moments. These co-existing orders enable magnetization dynamics unachievable in either ferromagnetic or conventional collinear antiferromagnetic materials.

Disorder in ultra-thin magnetic films can significantly hinder domain wall motion. One of the main issues on the path towards efficient domain wall based devices remains the characterization of the pinning landscape at the nanoscale. In this paper, we study domain wall motion in W/CoFeB/MgO thin films with perpendicular magnetic anisotropy crystallized by annealing at 400$^{\circ}$C and a process based on He$^{+}$ irradiation combined with elevated temperatures. Magnetic properties are similar for the whole series of samples, while the magnetic domain wall mobility is critically improved in the irradiated samples. By using an analytical model to extract nanoscale pinning parameters, we reveal important variations in the disorder of the crystallized samples. This work offers a unique opportunity to selectively analyze the effects of disorder on the domain wall dynamics, without the contribution of changes in the magnetic properties. Our results highlight the importance of evaluating the nanoscale pinning parameters of the material when designing devices based on domain wall motion, which in return can be a powerful tool to probe the disorder in ultra-thin magnetic films., Comment: 22 pages, 12 figures. Currently under review

Ultrafast laser pulses provide unique tools to manipulate magnetization dynamics at femtosecond timescales, where the interaction of the electric field -- such as excitation of spin carriers to non-equilibrium states, generation of localized charge currents, demagnetization, or inverse Faraday effect -- dominates over the magnetic field. Recent proposals using structured laser beams have enlightened the possibility to generate intense femtosecond magnetic fields, spatially isolated from the electric field. Here we demonstrate the relevance of this novel scenario to femtomagnetism, unveiling the purely precessional, non-linear, chiral response of the magnetization when subjected to circularly polarized magnetic fields. This fundamental result not only opens an avenue in the study of laser-induced ultrafast magnetization dynamics, but also sustains technological implications as a route to promote all-optical non-thermal magnetization switching both at shorter timescales -- towards the attosecond regime -- and at THz frequencies.

We investigate theoretically the motion of chiral N\'eel domain walls in perpendicularly magnetized systems driven by in-plane strain gradients. We show that such strain drives domain walls efficiently towards increasing tensile (compressive) strain for positive (negative) magnetostrictive materials. During their motion a local damping torque that opposes the precessional torque due to the strain gradient arises. This torque prevents the onset of turbulent dynamics, and steady domain wall motion with constant velocity is asymptotically reached for any arbitrary large strain gradient. Withal, velocities in the range of 500 m/s can be obtained using voltage-induced strain under realistic conditions.

We investigate experimentally the effects of externally applied strain on the injection of 180$^\circ$ domain walls (DW) from a nucleation pad into magnetic nanowires, as typically used for DW-based sensors. In our study the strain, generated by substrate bending, induces in the material a uniaxial anisotropy due to magnetoelastic coupling. To compare the strain effects, $Co_{40}Fe_{40}B_{20}$, $Ni$ and $Ni_{82}Fe_{18}$ samples with in-plane magnetization and different magnetoelastic coupling are deposited. In these samples, we measure the magnetic field required for the injection of a DW, by imaging differential contrast in a magneto-optical Kerr microscope. We find that strain increases the DW injection field, however, the switching mechanism depends strongly on the direction of the strain with respect to the wire axis. We observe that low magnetic anisotropy facilitates the creation of a domain wall at the junction between the pad and the wire, whereas a strain-induced magnetic easy axis significantly increases the coercive field of the nucleation pad. Additionally, we find that the effects of mechanical strain can be counteracted by a magnetic uniaxial anisotropy perpendicular to the strain-induced easy axis. In $Co_{40}Fe_{40}B_{20}$, we show that this anisotropy can be induced by annealing in a magnetic field. We perform micromagnetic simulations to support the interpretation of our experimental findings. Our simulations show that the above described observations can be explained by the effective anisotropy in the device. The anisotropy influences the switching mechanism in the nucleation pad as well as the pinning of the DW at the wire entrance. As the DW injection is a key operation for sensor performances, the observations show that strain is imposing a lower limit for the sensor field operating window.

We have designed, optimized, fabricated and characterized highly reflective quasi-omnidirectional (angular range of $0-60^\circ$) multilayered structures with a wide spectral range. Two techniques, chirping (a continuous change in thicknesses) and stacking of Bragg-type sub-structures, have been used to enhance the reflectance with minimum thickness for a given pair of refractive indices. Numerical calculations were carried out employing the transfer matrix method and we optimized the design parameters to obtain maximal reflectance averaged over different spectral ranges for all angles. We fabricated some of the optimized structures with porous silicon dielectric multilayers with low refractive contrast and compared their measured optical properties with the calculations. Two chirped structures with thicknesses 21.6 $\mu$m and 60.4 $\mu$m, resulting in quasi omnidirectional mirrors with bandwidths of 360 nm and 1800 nm, centered at 1160 nm and 1925 nm respectively have been shown. In addition, we fabricated a stacked sub-Bragg mirror structure with a quasi omnidirectional bandwidth of 1800 nm (centered at 1850 nm) and a thickness of 41.5 $\mu$m, which is almost two third (in thickness) of the chirped structure. Thus, our techniques allowed us to obtain relatively thin quasi-omnidirectional mirrors with wide bands over different wavelength ranges. Our analysis techniques can be used for the optimization of the reflectance not only in multilayered PS systems with different refractive index contrasts but also for systems with other types of materials with low refractive index contrast. The present study could also be useful for obtaining omnidirectional dielectric mirrors in large spectral regions using different materials, flat focusing reflectors, thermal regulators, or, if defects are included, as filters or remote chemical/biosensors with a wide angular independent response., Comment: 11 p\'aginas

Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti$_3$C$_2$T$_x$ MXene was introduced as 1 mg/mL slurry electrodes in an FE-CDI system for the removal and recovery of ammonia from simulated agricultural wastewater. The electrode performance was evaluated by operating the FE-CDI system with a feed solution of 500 mg/L NH$_4$Cl running in batch mode at a constant voltage of 1.20 V and -1.20 V in charging and discharging modes, respectively. Despite the low loading, Ti$_3$C$_2$T$_x$ flowing electrodes showed markedly improved performance, achieving 60% ion removal efficiency in a saturation time of 115 minutes with an adsorption capacity of 460 mg/g. To understand the high adsorption performance of the electrodes, physiochemical and structural analysis was done via a variety of characterization techniques such as SEM, TEM, XRD, DLS, and Raman Spectroscopy. Cyclic Voltammetry and Galvanostatic charge/discharge profiles were obtained to evaluate the electrochemical properties of the electrodes. The system proved to be an energy-saving technology by exhibiting a charge efficiency of 58-70% while operating at an energy consumption of 0.45 kWh/kg. A 92% regeneration efficiency showed that the electrodes were stable and suitable for long term and scalable usage. The results demonstrate that MXenes have the potential to improve the FE-CDI process for energy-efficient removal and recovery of ammonia., Comment: 11 pages, 6 figures, 1 table. Published in npj Clean Water

The calculation of the transfer matrix for a large non-periodic multilayered system may become unstable in the presence of absorption. We discuss the origin of this instability and we explore two methods to overcome it: the use of a total matrix to solve for all the fields at all the interfaces simultaneously and an expansion in the Bloch-like modes of a periodic artificially repeated system. We apply both methods to obtain the reflectance spectra of multilayered chirped structures composed of nanostructured porous silicon (PS). Both methods yield reliable and numerically stable results. The former allows an analysis of the field within all layers while the latter is much more efficient computationally, allowing the design of novel structures and the optimization of their parameters. We compare numerical and experimental results across a wide spectral range from the infrared to the ultraviolet., Comment: 20 pages, 7 figures

We have detected CH$^{+}$ and CH molecular absorption lines from the young compact planetary nebula IC 4997 from high resolution optical spectra. A high-resolution infra-red (H and K bands) spectrum provides detection of H$_2$ emission lines amongst many other lines. The H$_2$ lines provide an excitation temperature of 2100 K which may result from UV fluorescence in the envelope or from shocks formed at the interface between an expanding outflow of ionized gas and the neutral envelope ejected when the star was on the AGB. It is suggested that the CH$^+$ may result from the endothermic reaction C + H$_2$ $\rightarrow$ CH$^+$ + H. Intriguingly, CH$^{+}$ and also CH show a higher expansion velocity than H$_{\rm 2}$ emission suggesting they may be part of the post-shocked gas., Comment: 12 pages, 2 tables, 6 figures, accepted for publication in Publications of the Astronomical Society of the Pacific (PASP)

Spin-based electronics has evolved into a major field of research that broadly encompasses different classes of materials, magnetic systems, and devices. This review describes recent advances in spintronics that have the potential to impact key areas of information technology and microelectronics. We identify four main axes of research: nonvolatile memories, magnetic sensors, microwave devices, and beyond-CMOS logic. We discuss state-of-the-art developments in these areas as well as opportunities and challenges that will have to be met, both at the device and system level, in order to integrate novel spintronic functionalities and materials in mainstream microelectronic platforms., Comment: Review written by the SpinFactory European Consortium

We aim to study the main properties of a volume-limited unbiased sample of well-characterized semi-regular variables (SRs) in order to clarify important issues, such as the formation of axially symmetric planetary nebulae (PNe) from spherical circumstellar envelopes (CSEs), which takes place during the mass-loss process along the AGB phase. We present new high-S/N IRAM 30m observations of the 12CO J=2-1, J=1-0, and 13CO J=1-0 lines, in a volume-limited sample of SRs. We analyzed the data by characterizing the main properties of the CSEs. The 12CO J=2-1 data were used to study the profiles, while the 12CO J=1-0 data were used to estimate mass-loss rates for the complete sample. We have classified the sources into four groups according to the different profiles and final gas expansion velocities. Type 1 and 2 profiles are broad and narrow symmetric lines, respectively. Type 3 profiles on the contrary are strange profiles with very pronounced asymmetries. Finally, type 4 profiles are those showing two different components: a narrow line profile superimposed on a broad pedestal component. Interestingly, we report a moderate correlation between mass-loss rates and 12CO J=1-0/J=2-1 line intensity ratios for O-rich SRs, suggesting a different behaviour between C- and O-rich SRs. Using SHAPE+shapemol, we find a unified simple model based on an oblate spheroid placed in different orientations that may explain all the 12CO profiles in the sample, indicating that the gas expansion is in general predominantly equatorial. Moreover, in order to explain the type 4 profiles, we define an extra component which may somehow be a biconical structure or similar. Type 1 and 2 profiles, curiously, may also be explained by standard spherically symmetric envelopes. We conclude that most circumstellar shells around SRs show axial, strongly nonspherical symmetry., Comment: 32 pages, 28 figures, and 10 tables, accepted for publication in A&A

The main goal of this thesis is to unveil some questions related to the formation of complex fullerene-based molecules in space, with the aim of resolving some key problems in astrophysics. The unexpected detections of fullerenes and graphene (possible C24) in the H-rich circumstellar environments of evolved stars indicate that these complex molecules are not so rare and bring the idea that other forms of carbon such as hydrogenated fullerenes (fulleranes), buckyonions, and carbon nanotubes may be widespread in the Universe, being closely involved in many aspects of circumstellar/interstellar chemistry and physics. We explore this new and fertile field of research by focusing our study on some Galactic planetary nebulae (PNe) that contain fullerenes. In order to do this, we make use of laboratory spectra of several fullerene-related compounds and compare them with astronomical data. This work is a first step to open up a new field of interdisciplinary research, crossing the boundaries between astronomers, chemists, and physicists, and understand the significant presence of fullerene structures in circumstellar/interstellar environments., Comment: Accepted for publication in PASP (Dissertation Summary), 2 pages, 2 figures

Using small angle neutron scattering, we conducted a detailed structural study of poly(3-alkylthiophenes) dispersed in deuterated dicholorbenzene. The focus was placed on addressing the influence of spatial arrangement of constituent atoms of side chain on backbone conformation. We demonstrate that by impeding the {\pi}- {\pi} interactions, the branch point in side chain promotes torsional motion between backbone units and results in greater chain flexibility. Our findings highlight the key role of topological isomerism in determining the molecular rigidity and are relevant to the current debate about the condition necessary for optimizing the electronic properties of conducting polymers via side chain engineering.

The mass loss process along the AGB phase is crucial for the formation of circumstellar envelopes (CSEs), which in the post-AGB phase will evolve into planetary nebulae (PNe). There are still important issues that need to be further explored in this field; in particular, the formation of axially symmetric PNe from spherical CSEs. To address the problem, we have conducted high S/N IRAM 30m observations of 12CO J=1-0 and J=2-1, and 13CO J=1-0 in a volume-limited unbiased sample of semi-regular variables (SRs). We also conducted Yebes 40m SiO J=1-0 observations in 1/2 of the sample in order to complement our 12CO observations. We report a moderate correlation between mass loss rates and the 12CO(1-0)-to-12CO(2-1) intensity ratio, introducing a possible new method for determining mass loss rates of SRs with short analysis time. We also find that for several stars the SiO profiles are very similar to the 12CO profiles, a totally unexpected result unless these are non-standard envelopes., Comment: 4 pages, 4 figures, to appear in proceedings of IAU Symposium 343: "Why Galaxies Care About AGB Stars: A Continuing Challenge through Cosmic Time"

Oxide ceramics are sensitive to slow crack growth because adsorption of water can take place at the crack tip, leading to a strong decrease of the surface energy in humid (or air) conditions. This is a major drawback concerning demanding, long-term applications such as orthopaedic implants. Here we show that a specific nanostructuration of ceramic oxides can lead to a crack resistance never reached before, similar to that of covalent ceramics., Comment: 9 pages, 5 figures

Changes in crystalline phases resulting from low-temperature ageing of different yttria doped and non-doped zirconia-toughened alumina composites and nanocomposites were investigated under controlled humidity and temperature conditions in autoclave. A classical powder mixing processing route and a new modified colloidal processing route were used to process the composites. Different compositions ranging from 2.5 wt.% zirconia in a matrix of alumina to pure zirconia (3Y-TZP) were studied. It was observed that Al2O3+yttria stabilised ZrO2 composites exhibited significant ageing. However, ageing was much slower than traditionally observed for Y-TZP ceramics, due to the presence of the alumina matrix. Ageing was clearly limited for zirconia content beyond 25 wt.%. On the other side of the spectrum, Al2O3+2.5 wt.% ZrO2 initially presented a monoclinic fraction but did not show any ageing degradation. These composites seem to represent the best choice between slow crack growth and ageing resistance., Comment: 15 pages, 7 figures

We present seeing-limited narrow-band mid-IR GTC/CanariCam images of the spatially extended fullerene-containing planetary nebula (PN) IC 418. The narrow-band images cover the C60 fullerene band at 17.4 {\mu}m, the polycyclic aromatic hydrocarbon like (PAH-like) feature at 11.3 {\mu}m, the broad 9-13 {\mu}m feature, and their adjacent continua at 9.8 and 20.5 {\mu}m. We study the relative spatial distribution of these complex species, all detected in the Spitzer and Infrared Space Observatory (ISO) spectra of IC 418, with the aim of getting observational constraints to the formation process of fullerenes in H-rich circumstellar environments. A similar ring-like extended structure is seen in all narrow-band filters, except in the dust continuum emission at 9.8 {\mu}m, which peaks closer to the central star. The continuum-subtracted images display a clear ring-like extended structure for the carrier of the broad 9-13 {\mu}m emission, while the spatial distribution of the (PAH-like) 11.3 {\mu}m emission is not so well defined. Interestingly, a residual C60 17.4 {\mu}m emission (at about 4-{\sigma} from the sky background) is seen when subtracting the dust continuum emission at 20.5 {\mu}m. This residual C60 emission, if real, might have several interpretations; the most exciting being perhaps that other fullerene-based species like hydrogenated fullerenes with very low H-content may contribute to the observed 17.4 {\mu}m emission. We conclude that higher sensitivity mid-IR images and spatially resolved spectroscopic observations (especially in the Q-band) are necessary to get some clues about fullerene formation in PNe., Comment: Accepted for publication in Astronomical Journal (15 pages, 9 figures, and 2 Tables)

The microscopic deformation mechanism of charged colloidal glasses with extended-range interactions under shear is investigated by in-situ small-angle neutron scattering, and a dynamically correlated region (DCR) is identified. This short-lived region provides the resistance to the configurational rearrangement imposed by the external deformation, as evidenced by the evolution of the size of DCR in the shear thinning regime and the quantitative agreement between the local stress sustained by DCR and the macroscopic stress from rheological measurements at low and mediate shear rates. This finding suggests that DCR is an important quantity for microscopically addressing the flow and deformation behavior of strongly interacting colloids., Comment: arXiv admin note: substantial text overlap with arXiv:1611.03135

Spin waves are perturbations in the relative orientation of magnetic moments in a continuous magnetic system, which have been proposed as a new kind of information carrier for spin-based low power applications. For this purpose, a major obstacle to overcome is the energy-efficient excitation of coherent short wavelength spin waves and alternatives to excitation via the Oersted field of an alternating current need to be explored. Here we show, by means of micromagnetic simulations, how, in a perpendicularly magnetized thin strip, a domain wall pinned at a geometrical constriction emits spin waves when forced to rotate by the application of a low direct current flowing along the strip. Spin waves propagate only in the direction of the electron's flow at the first odd harmonic of the domain wall rotation frequency for which propagation is allowed. Excitation is due to in-plane dipolar stray field of the rotating domain wall and that the resulting unidirectionality is a consequence of the domain wall displacement at the constriction. On the other hand, the application of an external field opposing domain wall depinning breaks the symmetry for spin wave propagation in the two domains, allowing emission in both directions but at different frequencies. The results presented define a new approach to produce tunable high frequency spin wave emitters of easy fabrication and low power consumption.

Magnetic domain wall (DW) motion induced by a localized Gaussian temperature profile is studied in a Permalloy nanostrip within the framework of the stochastic Landau-Lifshitz-Bloch equation. The different contributions to thermally induced DW motion, entropic torque and magnonic spin transfer torque, are isolated and compared. The analysis of magnonic spin transfer torque includes a description of thermally excited magnons in the sample. A third driving force due to a thermally induced dipolar field is found and described. Finally, thermally induced DW motion is studied under realistic conditions by taking into account the edge roughness. The results give quantitative insights into the different mechanisms responsible for domain wall motion in temperature gradients and allow for comparison with experimental results., Comment: 12 pages, 12 figures

The flow of colloidal suspensions is ubiquitous in nature and industry. Colloidal suspensions exhibit a wide range of rheological behavior, which should be closely related to the microscopic structure of the systems. With in-situ small-angle neutron scattering complemented by rheological measurements, we investigated the deformation behavior of a charge-stabilized colloidal glass at particle level undergoing steady shear. A short-lived, localized elastic response at particle level, termed as transient elasticity zone (TEZ), was identified from the neutron spectra. The existence of the TEZ is a signature of the dynamical heterogeneity: The body of fluids under shear behaves like an elastic solid within the spatial range of TEZ but like fluid outside the TEZ. The size of TEZ shrinks as the shear rate increases in the shear thinning region, which shows that the shear thinning is accompanied by a diminishing dynamical heterogeneity. More interestingly, the TEZ is found to be the structural unit that provides the resistance to the imposed shear, as evidenced by the quantitative agreement between the local elastic stress sustained by TEZ and the macroscopic stress from rheological measurements at low and moderate shear rates. Besides the charged-stabilized colloidal suspension, a hard-sphere colloidal suspension at the same volume fraction and shear rates was also measured. The result highlights the key role of the electrostatic interparticle repulsion in promoting the local elasticity. Our findings provide an understanding on the nonlinear rheology of interacting colloidal glasses from a micro-mechanical view., Comment: 18 pages,5 figures