Search

A novel, open tubular capillary electrochromatographic method was developed for the in vitro oxidation of low-density lipoprotein (LDL) particles. Low-density lipoprotein particles with molar mass of ~2.5 MDa yielded a stable stationary phase at temperatures 25 and 37 [degrees]C and at pH values from 3.2 to 7.4. The quality of the coatings was not influenced by variations in the LDL concentration in the coating solutions (within the range of 2-0.015 mg/ mL) with the coating procedure used in the study. Radio-labeled LDL stationary phases and scanning electron microscopy, employed to shed light on the location and coating density of LDL particles on the inner surface of the capillary wall, confirmed the presence of an LDL monolayer and almost 100% coating efficiency (99 [+ or -] 8%). In addition, the radioactivity measurements allowed estimation of the amount of LDL present in a single capillary coating. Capillaries coated with human LDL particles were submitted to different oxidative conditions by changing the concentration of the oxidant (CuS[O.sup.4]), oxidation time, pH value, and temperature. The oxidation procedure was followed with electroosmotic flow mobility, which served as an indicator of the increase in total negative charges of LDL coatings, and by asymmetrical field flow fractionation, which measured the changes in size of the lipoprotein particles. The results indicated that oxidation of LDL was progressing with increasing time, temperature, and concentration of the oxidant as expected. The oxidation process was faster around neutral pH values (pH 6.5-7.4) and inhibited at acidic pH values (pH 5.5 and lower).

In order to elucidate controversial results emerging in chemical vapor generation (CVG) for trace element determination, we conducted a series of experiments devoted to the identification of intermediates formed by acid hydrolysis of amine-boranes. For the first time, direct analysis in real time coupled with high-resolution mass spectrometry (DART-Orbitrap) was applied for detection of this class of compounds. Mass spectra of both solid amine-boranes and their aqueous solutions (pH ~ 8, no hydrolysis) were acquired for understanding their ionization pathway. Mass spectra of aqueous solutions of t-BuNH2·BH3 and Me2NH·BH3 were acquired under conditions that are employed in CVG (0.017–4.0 mol L−1 HCl, 0.167–0.2 mol L−1 borane reagent). The results disclose a reactivity driven by pH of amine-boranes undergoing hydrolysis. At low acidity, the hydrolysis proceeds according to the currently accepted displacement mechanisms (i.e., R3N·BH3 + H3O+ → R3NH+ + H2OBH3). At higher acidity, N-tert-butyl, cyclotriborazane, and bis(dimethylamino)boronium were identified, for the first time, during the hydrolysis of t-BuNH2·BH3 and Me2NH·BH3, respectively. Formation of these intermediates was ascribed to a hydrolysis pathway starting with the ionization of the amine-borane, (i.e., R3N·BH3 + H3O+ → [(H2O)R3NBH2] + + H2). The new evidence explains the anomalous behavior observed in CVG by amine-borane derivatization, and updates the currently accepted mechanisms for the acid hydrolysis of amine-boranes. Graphical Abstract [ABSTRACT FROM AUTHOR]

Atherosclerosis has received wide attention as a primary cause of premature death in developed countries. The retention of low-density lipoprotein (LDL) particles in the intima, the inner layer of the capillaries, has been imputed as the main cause of the development of atherosclerotic plaques. The entrapment of LDL is mainly due to the specific interaction between the lysine-rich site on apolipoprotein B-100 (apoB-100), a major apolipoprotein of LDL, and extracellular matrix (ECM) components such as collagen, proteoglycans, and glycosaminoglycans (GAGs). Although valuable techniques already exist for studies on apoB-100 and ECM interactions, there is continued need for miniaturized tools that can complement the tools already available and even provide totally new data. This work explores the applicability of the quartz crystal microbalance (QCM) for interaction studies between apoB-100 peptide fragments and various components of the ECM. Two positive peptide fragments, PP and PP2, and two components of the ECM, collagen I and a selected GAG, chondroitin 6-sulfate (C6S), were immobilized on polystyrene and carboxyl sensor chips. C6S was injected as analyte for PP- and PP2-coated surfaces, while PP was the analyte for collagen I and C6S surfaces. The estimated dissociation constant ( KD) indicates that the interactions occur via the positive residues, lysine and arginine, of apoB-100. The continuous-flow QCM system employed in this study is shown to be an excellent tool for the elucidation of interactions between these types of biomolecules. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

The article discusses the preparation of pink tea which known as Noon chai with special tea leaves such as Kashmiri chai, water, salt, baking soda and milk. It states that the tea leaves are boiled for a long time for the extraction of polyphenols with the addition of baking soda and milk to achieve the pink color of the tea. It also cites the phenolic content and antioxidative capacity of the tea.

The article presents the journal's challenge involving Pink tea or Noon Chai which is a Kashmiri beverage.

The article offers details of the absinthe challenge, which is a herbal spirit made from the botanicals wormwood, anise and fennel.

The article focuses on the accusations that absinthe, causes absinthism syndrome during the 20th century. Topics discussed include thujone content of the absinthe which was overestimated because of the crude analytical techniques during the period, essential oils contained by absinthe which can dissolve several compounds, including monoterpene thujone and the aromatic compound anethol, and dilution of absinthe with cold water which led to stability of microemulsion.

The interaction of chemicals with DNA may lead to genotoxicity, mutation or carcinogenicity. A simple open tubular capillary electrochromatographic method is proposed to rapidly assess the interaction affinity of three environmental contaminants (1,4-phenylenediamine, pyridine and 2,4-diaminotoluene) to DNA by measuring their retention in the capillaries coated with DNA probes. DNA oligonucleotide probes were immobilized on the inner wall of a fused silica capillary that was first derivatized with 3-(aminopropyl)-triethoxysilane (APTES). The difference in retention times and factors was considered as the difference in interaction affinity of the contaminants to the DNA probes. The interaction of the contaminants with both double-stranded (dsDNA) and single-stranded DNA (ssDNA) coatings was compared. Retention factors of 1,4-phenylenediamine, pyridine and 2,4-diaminotoluene in the capillary coated with ssDNA probe were 0.29, 0.42, and 0.44, respectively. A similar trend was observed in the capillary coated with dsDNA, indicating that 2,4-diaminotoluene has the highest affinity among the three contaminants. The relative standard deviation (RSD) for the retention factors was in the range of 0.05-0.69% (n = 3). The results demonstrated that the developed technique could be applied for preliminary screening purpose to provide DNA interaction affinity information of various environmental contaminants.

Diabetes, a multifunctional disease and a major cause of morbidity and mortality in the industrialized countries, strongly associates with the development and progression of atherosclerosis. One of the consequences of high level of glucose in the blood circulation is glycation of long-lived proteins, such as collagen I, the most abundant component of the extracellular matrix (ECM) in the arterial wall. Glycation is a long-lasting process that involves the reaction between a carbonyl group of the sugar and an amino group of the protein, usually a lysine residue. This reaction generates an Amadori product that may evolve in advanced glycation end products (AGEs). AGEs, as reactive molecules, can provoke cross-linking of collagen I fibrils. Since binding of low-density lipoproteins (LDLs) to the ECM of the inner layer of the arterial wall, the intima, has been implicated to be involved in the onset of the development of an atherosclerotic plaque, collagen modifications, which can affect the affinity of native and oxidized LDL for collagen I, can promote the entrapment of LDLs in the intima and accelerate the progression of atherosclerosis. In this study, open tubular capillary electrochromatography is proposed as a new microreactor to study in situ glycation of collagen I. The kinetics of glycation was first investigated in a fused silica collagen I-coated capillary. Dimethyl sulphoxide, injected as an electroosmotic flow marker, gave information about the charge of coating. Native and oxidized LDL, and selected peptide fragments from apolipoprotein B-100, the protein covering LDL particles, were injected as marker compounds to clarify the interactions between LDLs and the glycated collagen I coating. The method proposed is simple and inexpensive, since only small amounts of collagen and LDL are required. Atomic force microscopy images complemented our studies, highlighting the difference between unmodified and glycated collagen I surfaces., (Copyright 2010 Elsevier B.V. All rights reserved.)

An electrochromatographic method was developed for the in situ delipidation of intact low-density lipoprotein (LDL) particles immobilized on the inner wall of a 50-microm inner diameter silica capillary. In this method, the immobilized LDL particles were delipidated with nonionic surfactant Nonidet P-40 at pH 7.4 and 25 degrees C, resulting in an apolipoprotein B-100 (apoB-100)-coated capillary surface. The mobility of the electroosmotic flow marker dimethyl sulfoxide gave information about the surface charge, and the retention factors of beta-estradiol, testosterone, and progesterone were informative of the surface hydrophobicity. The calculated distribution coefficients of the steroids produced specific information about the affinity interactions of the steroids, with capillary surfaces coated either with intact LDL particles or with apoB-100. Delipidation with Nonidet P-40 resulted in a strong decrease in the hydrophobicity of the LDL coating. Atomic force microscopy images confirmed the loss of lipids from the LDL particles and the presence of apoB-100 protein coating. The in situ delipidation of LDL particles in capillaries represents a novel approach for the isolation of immobilized apoB-100 and for the determination of its pI value. The technique requires extremely low quantities of LDL particles, and it is simple and fast.