Search

Abstract Background Chronic headache (CH) is a widespread problem in clinical practice. The causes of the disease are very complex and varied, including organic, functional and even psychogenic causes. Adverse childhood experiences (ACEs) are related to several psychogenic neurological disorders. However, whether the number of ACEs is associated with the risk of developing CH has not been well established. Therefore, in this study, we aimed to identify the association between the number of ACEs and the risk of developing CH in the general population using a Chinese national survey. Methods Participants who reported experiencing headache in two consecutive waves of investigation from the China Health and Retirement Longitudinal Study (CHARLS) were defined as having CH and were included in this study. The life history information of the participants was then matched. Twelve types of ACEs were identified from the life history information. The participants were divided into four classes according to the number of ACEs. The association between the number of ACEs and the risk of developing CH was analysed using logistic regression. Results A total of 654 (14.77%) of 4427 participants were defined as CH within 9 years of the survey. After adjusting for various confounding factors, compared to that associated with Class 1 (ACEs = 0), the OR for CH associated with Class 3 (ACEs = 2) was 1.68 (95% CI: 1.30–2.19), P 2) was 2.62 (95% CI:2.04–3.38),P

High-performance non-enzymatic glucose sensor composite electrodes were prepared by loading Ni onto a boron-doped diamond (BDD) film surface through a thermal catalytic etching method. A carbon precipitate with a desired thickness could be formed on the Ni/BDD composite electrode surface by tuning the processing conditions. A systematic study regarding the influence of the precipitated carbon layer thickness on the electrocatalytic oxidation of glucose was conducted. While an oxygen plasma was used to etch the precipitated carbon, Ni/BDD-based composite electrodes with the precipitated carbon layers of different thicknesses could be obtained by controlling the oxygen plasma power. These Ni/BDD electrodes were characterized by SEM microscopies, Raman and XPS spectroscopies, and electrochemical tests. The results showed that the carbon layer thickness exerted a significant impact on the resulting electrocatalytic performance. The electrode etched under 200 W power exhibited the best performance, followed by the untreated electrode and the electrode etched under 400 W power with the worst performance. Specifically, the electrode etched under 200 W was demonstrated to possess the highest sensitivity of 1443.75 μA cm−2 mM−1 and the lowest detection limit of 0.5 μM.

The transformations of physicochemical properties on manganese oxides during peroxymonosulfate (PMS) activation are vital factors to be concerned. In this work, Mn3O4 nanospheres homogeneously loaded on nickel foam are prepared, and the catalytic performance for PMS activation is evaluated by degrading a target pollutant, Acid Orange 7, in aqueous solution. The factors including catalyst loading, nickel foam substrate, and degradation conditions have been investigated. Additionally, the transformations of crystal structure, surface chemistry, and morphology on the catalyst have been explored. The results show that sufficient catalyst loading and the support of nickel foam play significant roles in the catalytic reactivity. A phase transition from spinel Mn3O4 to layered birnessite, accompanied by a morphological change from nanospheres to laminae, is clarified during the PMS activation. The electrochemical analysis reveals that more favorable electronic transfer and ionic diffusion occur after the phase transition so as to enhance catalytic performance. The generated SO4•− and •OH radicals through redox reactions of Mn are demonstrated to account for the pollutant degradation. This work will provide new understandings of PMS activation by manganese oxides with high catalytic activity and reusability.

In this work, the CMK-3 is successfully prepared with SBA-15 as the template and first annealed to 2000 °C to improve thermal conductivity. The annealed CMK-3 has a thermal conductivity of 6.981 W m−1 K−1 higher than un-annealed CMK-3. The annealed CMK-3 is used to encapsulate the RT44HC, and RT44HC/annealed CMK-3 has 10-fold of thermal conductivity and enhanced thermal stability than RT44HC. The RT44HC/annealed CMK-3 has a large melting enthalpy of 177.8 J g−1 and good thermal stability. The RT44HC/annealed CMK-3 has optical absorptive coefficient of visible range of solar spectrum, which identify seven-fold higher than RT44HC. The RT44HC/annealed CMK-3 has great photo-thermal performance, and the photo-driven energy charging and discharging rate of RT44HC/annealed CMK-3 is almost 30-fold larger than the RT44HC. The results show that the annealed CMK-3 is a great mesoporous carbon nanomaterial for phase change materials and the annealed CMK-3 based phase change material has great potential in solar thermal utilizations such as solar water heating system and solar heating building systems.