Search

Magnetic nanoparticle (MNP) agglutination-based optomagnetic biosensing has been applied for rapid and sensitive detection of various biomolecules. However, the underlying physics of optomagnetic biosensing remains a hurdle, especially when the size of MNPs approaches the laser wavelength, i.e., the scattering enters the Mie regime. In this study, we propose a numerical model by combining the Fokker–Planck equation and the T-matrix to explain the effect of Mie scattering on the optomagnetic signal of the agglutinated MNPs. It indicates that the orientation-dependent Mie scattering of the MNP dimer leads to an inverse optomagnetic response compared to that of the MNP monomer. The inverse optomagnetic response can dominate with the enhancement of Mie scattering. To verify the numerical model, biotinylated bovine serum albumin (biotin-BSA) is applied to agglomerate streptavidin-coated MNPs in a standard biosensing strategy representing the immuno-agglutination assay. Guided by the model, a proportion-based signal analysis is proposed to improve the performance of the MNP agglutination-based optomagnetic biosensor, which provides a picomolar detection limit for biotin-BSA (∼0.1 ng/mL) with a total assay time of 8 min, paving the way for more accurate point-of-care diagnosis. [ABSTRACT FROM AUTHOR]

In order to ensure the safety of coal mine production, a mine water source identification model is proposed to improve the accuracy of mine water inrush source identification and effectively prevent water inrush accidents based on kernel principal component analysis (KPCA) and improved sparrow search algorithm (ISSA) optimized kernel extreme learning machine (KELM). Taking Zhaogezhuang mine as the research object, firstly, Na+, Ca2+, Mg2+, Cl-, SO2- 4 and HCO- 3 were selected as evaluation indexes, and their correlation was analyzed by SPSS27 software, with reducing the dimension of the original data by KPCA. Secondly, the Sine Chaotic Mapping, dynamic adaptive weights, and Cauchy Variation and Reverse Learning were introduced to improve the Sparrow Search Algorithm (SSA) to strengthen global search ability and stability. Meanwhile, the ISSA was used to optimize the kernel parameters and regularization coefficients in the KELM to establish a mine water inrush source discrimination model based on the KPCA-ISSA-KELM. Then, the mine water source data are input into the model for discrimination in compared with discrimination results of KPCA-SSA-KELM, KPCA-KELM, ISSA-KELM, SSA-KELM and KELM models. The results of the study show as follows: The discrimination results of the KPCA-ISSA-KELM model are in agreement with the actual results. Compared with the other models, the accuracy of the KPCA-ISSA-KELM model is improved by 8.33%, 12.5%, 4.17%, 21.83%, and 25%, respectively. Finally, when these models were applied to discriminate water sources in a coal mine in Shanxi, and the misjudgment rates of each model were 28.57%, 19.05%, 14.29%, 23.81%, 9.52% and 4.76%, respectively. From this, the KPCA-ISSA-KLEM model is the most accurate about discrimination and significantly better than other models in other evaluation indicators, verifying the universality and stability of the model. It can be effectively applied to the discrimination of inrush water sources in mines, providing important guarantees for mine safety production. [ABSTRACT FROM AUTHOR]

Accurate measurement of coal gas permeability helps prevent coal gas safety accidents effectively. To predict permeability more accurately, we propose the IDBO-BPNN coal body gas permeability prediction model. This model combines the Improved Dung Beetle algorithm (IDBO) with the BP neural network (BPNN). First, the Sine chaotic mapping, Osprey optimization algorithm, and adaptive T-distribution dynamic selection strategy are integrated to enhance the DBO algorithm and improve its global search capability. Then, IDBO is utilized to optimize the weights and thresholds in BPNN to enhance its prediction accuracy and mitigate the risk of overfitting to some extent. Secondly, based on the influencing factors of gas permeability, effective stress, gas pressure, temperature, and compressive strength, they are chosen as the coupling indicators. The SPSS 27 software is used to analyze the correlation among the indicators using the Pearson correlation coefficient matrix. Additionally, the Kernel Principal Component Analysis (KPCA) is employed to extract the original data. Then, the original data is divided into principal component data for the model input. The prediction results of the IDBO-BPNN model are compared with those of the PSO-BPNN, PSO-LSSVM, PSO-SVM, MPA-BPNN, WOA-SVM, BES-SVM, and DPO-BPNN models. This comparison assesses the capability of KPCA to enhance the accuracy of model predictions and the performance of the IDBO-BPNN model. Finally, the IDBO-BPNN model is tested using data from a coal mine in Shanxi. The results indicate that the predicted outcome closely aligns with the actual value, confirming the reliability and stability of the model. Therefore, the IDBO-BPNN model is better suited for predicting coal gas permeability in academic research writing. [ABSTRACT FROM AUTHOR]