Search

The photoelectrochemical (PEC) detection method, as a potential strategy for Cu2+ detection, has garnered widespread attention. In this paper, we present a PEC sensing platform using upconversion nanoparticles (UCNPs) as the conversion light source and CdTe quantum dots (QDs) as the photoactive material for the detection of Cu2+ in solution. When irradiated with a 980 nm light source, the UCNPs will absorb the 980 nm laser and emit fluorescence around 550 nm, which is then absorbed by the CdTe QDs. This absorption leads to electron-hole separation, with electrons transferring through the multi-walled carbon nanotubes (MWCNTs) into the indium tin oxide (ITO) electrode. In the presence of Cu2+, the Cu2+ will be reduced to Cu+ by the electrons generated by the CdTe QDs, thereby hindering the transfer of electrons from the CdTe QDs to the ITO electrode and resulting in a reduction in current. The photocurrent continuously decreases with increasing Cu2+ concentration and shows a good linear relationship with Cu2+ concentration in the range of 1 µM to 25 µM. The lowest detection limit is 0.5 µM. [ABSTRACT FROM AUTHOR]

In this study, we present the novel combination of AE‐TPEA with RuMOF to construct an electrochemiluminescence (ECL) sensor using a TPEA‐RuMOF composite material specifically for copper ions (Cu2+) detection. Using K2S2O8 as a co‐reactant, we explored the ECL behavior of the TPEA‐RuMOF modified electrode, enabling the quantitative detection of Cu2+. Remarkably, this sensor exhibited a wide linear range from 1×10−5 to 1×10−9 M (R2=0.998) and boasted a detection limit as low as 0.41 nM, which is considerably below the EPA (Environmental Protection Agency) permissible copper ion concentration in drinking water of <1.3 mg/L. our synthesized probe offers enhanced stability and selectivity in copper ion detection. This indicates its considerable potential for high‐performance copper ion detectors. We further validated the analytical applicability of this sensor using river water samples. [ABSTRACT FROM AUTHOR]

A fluorescence–electrochemiluminescence (FL–ECL) dual-mode sensor for apoE gene detection has been developed, leveraging the unique properties of ruthenium metal organic framework nanosheets (RuMOFNSs). The system utilizes the quenching effect of the Ru(bpy)32+ ECL signal by ferrocene, leading to the synthesis of a multi-electron electrical signal marker, bisferrocene. By immobilizing the P-DNA on RuMOFNSs, bisferrocene quenches both FL and ECL signals. The addition of T-DNA and the consequent formation of double-stranded DNA enable the ExoIII enzyme to excise the bisferrocene fragment, restoring the signals. The sensor demonstrates wide detection linear ranges (1 fM to 1 nM for FL and 0.01 fM to 10 pM for ECL) and remarkable sensitivity (0.048 fM for FL and 0.016 fM for ECL). The dual-mode design offers enhanced reliability through a self-correction feature, reducing false positives. Compared to single-mode sensors, the dual-mode sensor shows significant advantages. Real-world testing confirms the sensor's capacity for robust detection in actual samples, underscoring its promising application in early disease diagnosis. This innovative approach opens up avenues for multi-signal response sensors, offering significant potential for diagnostic technologies. [ABSTRACT FROM AUTHOR]

The development of convenient and efficient strategies without using complex nanomaterials or enzymes for signal amplification is very important for bioanalytical applications. Herein, a novel electrochemical DNA sensor was developed by harnessing the signal amplification efficiency of catalytic hairpin assembly (CHA) and a brand‐new signal marker tetraferrocene. The prepared sensor had both ends of the probe H2 labeled with tetraferrocene; both ends have a large number of unhybridized T bases, which cause tetraferrocene to move closer to the electrode surface, generating a high‐efficiency amplification signal. In the presence of target DNA, it induced strand exchange reactions promoting the formation of double‐stranded DNA and recycling of target DNA. Under optimal conditions, the sensor showed a good linear correlation between the peak currents and logarithm of target DNA concentrations (ranging from 0.1 fM to 0.3125 pM) with a detection limit of 0.06 fM, which is obtained by a triple signal‐to‐noise ratio. Additionally, the prepared sensor possesses excellent selectivity, reproducibility, and stability, demonstrating efficient and stable DNA detection methodology. [ABSTRACT FROM AUTHOR]

The photoelectrochemical (PEC) detection method, as a potential strategy for Cu2+ detection, has garnered widespread attention. In this paper, we present a PEC sensing platform using upconversion nanoparticles (UCNPs) as the conversion light source and CdTe quantum dots (QDs) as the photoactive material for the detection of Cu2+ in solution. When irradiated with a 980 nm light source, the UCNPs will absorb the 980 nm laser and emit fluorescence around 550 nm, which is then absorbed by the CdTe QDs. This absorption leads to electron-hole separation, with electrons transferring through the multi-walled carbon nanotubes (MWCNTs) into the indium tin oxide (ITO) electrode. In the presence of Cu2+, the Cu2+ will be reduced to Cu+ by the electrons generated by the CdTe QDs, thereby hindering the transfer of electrons from the CdTe QDs to the ITO electrode and resulting in a reduction in current. The photocurrent continuously decreases with increasing Cu2+ concentration and shows a good linear relationship with Cu2+ concentration in the range of 1 µM to 25 µM. The lowest detection limit is 0.5 µM. [ABSTRACT FROM AUTHOR]