Search

Frequency-based synthetic dimensions are a promising avenue to extend the dimensionality of photonic systems. In this work, we show how a tilted synthetic lattice is naturally realised by periodically modulating a single-mode resonator under a coherent monochromatic drive. We theoretically study the Bloch wave dynamics in the tilted synthetic lattice, which gives rise to peculiar features in the spectral distribution of the cavity field. Our predictions are experimentally confirmed using a planar tunable superconducting microwave resonator., Comment: 10 pages, 7 figures

When measuring electromagnetic radiation of frequency $f$, the most sensitive detector is the one that counts the single quanta of energy $h f$. Single photon detectors (SPDs) were demonstrated from $\gamma$-rays to infrared wavelengths, and extending this range down to the microwaves is the focus of intense research. The energy of $10\,\mathrm{GHz}$ microwave photon, about $40\,\mathrm{\mu eV}$ or $7\, \mathrm{yJ},$ is enough to force a superconducting Josephson junction into its resistive state, making it suitable to be used as a sensor. In this work, we use an underdamped Josephson junction to detect single thermal photons stochastically emitted by a microwave copper cavity at millikelvin temperatures. After characterizing the source and detector, we vary the temperature of the resonant cavity and measure the increased photon rate. The device shows an efficiency up to 40% and a dark count rate of $0.1\,\mathrm{Hz}$ in a bandwidth of several gigahertz. To confirm the thermal nature of the emitted photons we verify their super-Poissonian statistics, which is also a signature of quantum chaos. We discuss detector application in the scope of Dark Matter Axion searches, and note its importance for quantum information, metrology and fundamental physics.

A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire rods immersed into the cavity. At multiple operating frequencies, the sensitivity of the instrument was at the level of viable axion models.

The accuracy of microwave measurements is not only critical for applications in telecommunication and radar, but also for future quantum computers. Qubit technologies such as superconducting qubits or spin qubits require detecting minuscule signals, typically achieved by reflecting a microwave tone off a resonator that is coupled to the qubit. Noise from cabling and amplification, e.g. from temperature variations, can be detrimental to readout fidelity. We present an approach to detect phase and amplitude changes of a device under test based on the differential measurement of microwave tones generated by two first-order sidebands of a carrier signal. The two microwave tones are sent through the same cable to the measured device that exhibits a narrow-band response for one sideband and leaves the other unaffected. The reflected sidebands are interfered by down-conversion with the carrier. By choosing amplitude and phases of the sidebands, suppression of either common amplitude or common phase noise can be achieved, allowing for fast, stable measurements of frequency shifts and quality factors of resonators. Test measurements were performed on NbN superconducting resonators at 25 mK to calibrate and characterise the experimental setup, and to study time-dependent fluctuations of their resonance frequency.

A haloscope of the QUAX--$a\gamma$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~\mu\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements in presence of magnetic field. Through the cavity tuning mechanism it was possible to modulate the resonance frequency of the haloscope in the region $10.35337-10.35345$~GHz and thus acquire different dataset at different resonance frequencies. Acquiring each dataset for about 50 minutes, combining them and correcting for the axion's signal estimation-efficiency we set a limit on the axion-photon coupling $g_{a\gamma\gamma}< 0.731\times10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$.

The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role. We report a 3D resonator based on a right circular copper cavity with hollow cylinders that confine higher order modes around the cylinder axis. Its effective volume at 10.3\,GHz is $3.4 \cdot 10^{-2}$ liters, and under an 8\,T-field we measured an internal quality factor of more than 9 millions. These parameters demonstrate the potential of this unique resonator to probe galactic dark matter axion at remarkable scan rates of 15\,MHz/day when the cavity is readout by a quantum-limited receiver.

Recent experiments suggest the possibility to tune superconductivity in metallic nanowires by application of modest gate voltages. It is largely debated whether the effect is due to an electric field at the superconductor surface or small currents of high-energy electrons. We shed light on this matter by studying the suppression of superconductivity in sample geometries where the roles of electric field and electron-current flow can be clearly separated. Our results show that suppression of superconductivity does not depend on the presence or absence of an electric field at the surface of the nanowire, but requires a current of high-energy electrons. The suppression is most efficient when electrons are injected into the nanowire, but similar results are obtained also when electrons are passed between two remote electrodes at a distance $d$ to the nanowire (with $d$ in excess of $1~\mathrm{\mu m}$). In the latter case, high-energy electrons decay into phonons which propagate through the substrate and affect superconductivity in the nanowire by generating quasiparticles. We show that this process involves a non-thermal phonon distribution, with marked differences from the loss of superconductivity due to Joule heating near the nanowire or an increase in the bath temperature.

A haloscope of the QUAX--$a\gamma$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~\mu\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With the data collected in about 1 h at the cavity frequency $\nu_c=10.40176$ GHz, the experiment reaches the sensitivity necessary for the detection of galactic QCD-axion, setting the $90\%$ confidence level limit to the axion-photon coupling $g_{a\gamma\gamma}<0.639\times10^{-13}$ GeV$^{-1}$., Comment: 7 pages, 6 figures. Analysis method changed. The result is almost left unchanged. Consequently, text has been revised in the Analysis section. Added references. Added equations (2), (4), (5)

Spin-dependent fifth-forces are associated with particles beyond the standard model. In particular, light pseudo-scalar bosons mediate long-range forces, allowing mass to interact with spins. The search of these interactions can be performed by periodically varying the distance between a source mass and a spin ensemble, in order to modulate the force intensity and detect it with precision magnetometry techniques. In our setup the force arises from room temperature lead masses and is detected in a paramagnetic crystal at 4.2\,K, whose magnetisation is monitored by a SQUID-based magnetometer with the sensitivity of $53\,\mathrm{aT/\sqrt{Hz}}$. Our measurement places the most stringent constraints on a spin-mass interaction in the ranges 1\,cm to 10\,m and 10\,km to 300\,km, improving existing limits up to more than two orders of magnitude. We show that this experimental technique may be further leveraged to explore a vast region of the fifth force's parameter space, with an interaction range longer than a few centimetres., Comment: 5 figures, 10 pages

A photon-magnon hybrid system can be realised by coupling the electron spin resonance of a magnetic material to a microwave cavity mode. The quasiparticles associated with the system dynamics are the cavity magnon polaritons, which arise from the mixing of strongly coupled magnons and photons. We illustrate how these particles can be used to probe the magnetisation of a sample with a remarkable sensitivity, devising suitable spin-magnetometers which ultimately can be used to directly assess oscillating magnetic fields. Specifically, the capability of cavity magnon polaritons of converting magnetic excitations to electromagnetic ones, allows for translating to magnetism the quantum-limited sensitivity reached by state-of-the-art electronics. Here we employ hybrid systems composed of microwave cavities and ferrimagnetic spheres, to experimentally implement two types of novel spin-magnetometers., Comment: 7 pages, 3 figures

The potential of photon-magnon hybrid systems as building blocks for quantum information science has been widely demonstrated, and it is still the focus of much research. We leverage the strengths of this unique heterogeneous physical system in the field of precision physics beyond the standard model, where the sensitivity to the so-called "invisibles" is currently being boosted by quantum technologies. Here, we demonstrate that quanta of spin waves, driven by tiniest, effective magnetic field, can be detected in a large frequency band using a hybrid system as transducer. This result can be applied to the search of cosmological signals related, for example, to cold Dark Matter, which may directly interact with magnons. Our model of the transducer is based on a second-quantisation two-oscillators hybrid system, it matches the observations, and can be easily extended to thoroughly describe future large-scale ferromagnetic haloscopes., Comment: 9 pages, 5 figures

The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding to a gain of one order of magnitude with respect to a traditional copper cylindrical-cavity with the corresponding TM$_{010}$ mode resonating at the same frequency. The implications to dark-matter axion-searches with cavity experiments are discussed showing that the gain in quality factor is not spoiled by a reduced geometrical coupling $C_{030}$ of the cavity mode to the axion field. This reduction effect is estimated to be at most 20%. Numerical simulations show that frequency tuning of several hundreds MHz is feasible.

Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic structure by the use of sapphire rods. The quality factor at cryogenic temperature is in excess of $5 \times 10^5$ for a selected mode., Comment: 6 pages, 7 figures

A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diameter YIG spheres coupled to a single microwave cavity mode by means of a static magnetic field. Our setup is the most sensitive rf spin-magnetometer ever realized. The minimum detectable field is $5.5\times10^{-19}\,$T with 9 h integration time, corresponding to a limit on the axion-electron coupling constant $g_{aee}\le1.7\times10^{-11}$ at 95% CL. The scientific run of our haloscope resulted in the best limit on DM-axions to electron coupling constant in a frequency span of about 120 MHz, corresponding to the axion mass range $42.4$-$43.1\,\mu$eV. This is also the first apparatus to perform an axion mass scanning by changing the static magnetic field., Comment: 4 pages, 4 figures

To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,\mu\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of Cu resonant cavities. In this paper we deal with the last issue, presenting the result of a search for galactic axions using a haloscope based on a $36\,\mbox{cm}^3$ NbTi superconducting cavity. The cavity worked at $T=4\,\mbox{K}$ in a 2\,T magnetic field and exhibited a quality factor $Q_0= 4.5\times10^5$ for the TM010 mode at 9\,GHz. With such values of $Q$ the axion signal is significantly increased with respect to copper cavity haloscopes. Operating this setup we set the limit $g_{a\gamma\gamma}<1.03\times10^{-12}\,\mbox{GeV}^{-1}$ on the axion photon coupling for a mass of about 37\,$\mu$eV. A comprehensive study of the NbTi cavity at different magnetic fields, temperatures, and frequencies is also presented.

Recently some of the authors proposed a search for galactic axions with mass about 0.2~$\mu$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH), has a potential sensitivity on the axion-to-photon coupling, $g_{a\gamma\gamma}$, of about $6\times10^{-17}$ $\mbox{GeV}^{-1}$, reaching the region predicted by KSVZ\cite{KSVZ} and DFSZ\cite{DFSZ} models of QCD axions. We report here the status of the project., Comment: Contributed to the 14th Patras Workshop on Axions, WIMPs and WISPs, DESY in Hamburg, June 18 to 22, 2018

Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with electronic spins in a magnetized sample. In principle, axion-induced magnetization changes can be detected by embedding a sample in an rf cavity in a static magnetic field. In this work we describe the operation of a prototype ferromagnetic haloscope, with a sensitivity limited by thermal fluctuations and receiver noise. With a preliminary dark matter search, we are able to set an upper limit on the coupling constant of DFSZ axions to electrons $g_{aee}<4.9\times10^{-10}$ at 95\% C.L. for a mass of $58\,\mu$eV (i.\,e. 14\,GHz). This is the first experimental result with an apparatus exploiting the coupling between cosmological axions and electrons., Comment: 10 pages, 8 figures

This note presents a method to tune the resonant frequency $f_{0}$ of a rectangular microwave cavity. This is achieved using a liquid metal, GaInSn, to decrease the volume of the cavity. It is possible to shift $f_{0}$ by filling the cavity with this alloy, in order to reduce the relative distance between the internal walls. The resulting modes have resonant frequencies in the range $7\div8\,$GHz. The capability of the system of producing an Electron Paramagnetic Resonance (EPR) measurement has been tested by placing a 1 mm diameter Yttrium Iron Garnet (YIG) sphere inside the cavity, and producing a strong coupling between the cavity resonance and Kittel mode. This work shows the possibility to tune a resonant system in the GHz range, which can be useful for several applications., Comment: 7 Pages, 5 Figures

The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field., Comment: Contributed to the 13th Patras Workshop on Axions, WIMPs and WISPs, Thessaloniki, May 15 to 19, 2017

We present a more stringent upper limit on long-range axion-mediated forces obtained by the QUAX-g$_p$g$_s$ experiment, located at the INFN - Laboratori Nazionali di Legnaro. We investigate the possible coupling between the electron spins of a paramagnetic GSO crystal and unpolarized nucleons of lead disks by measuring variations of GSO magnetization with a dc-SQUID magnetometer. Such an induced magnetization can be interpreted as the effect of a long-range spin dependent interaction mediated by axions or Axion Like Particles (ALPs). The corresponding coupling strength is proportional to the CP violating term $g_p^eg_s^N$, i.e. the product of the pseudoscalar and scalar coupling constants of electron and nucleon, respectively. Previous upper limits are improved by one order of magnitude, namely $g_p^eg_s^N/(\hbar c) \le 4.3\times10^{-30}$ at 95% confidence level, in the interaction range $10^{-3}$ m $<\lambda_a<0.2$ m. We eventually discuss our plans to improve the QUAX-g$_p$g$_s$ sensitivity by a few orders of magnitude, which will allow us to investigate the $\vartheta\simeq 10^{-10}$ range of CP-violating parameter and test some QCD axion models., Comment: 13 pages, 6 figures, Physics Letters B, 2017