Search

Commercial aluminum foils were coated by graphene oxide, and its functionalized derivatives and the corrosion performance of the coated specimens were examined in acidic conditions (lithium perchlorate and sulfuric acid). Electrochemical experiments have shown that all graphene oxide-coated specimens provided up to 96% corrosion inhibition efficiency with a corresponding lower corrosion rate compared to the bare aluminum foil. Our results clearly show that graphene-related materials offer viable alternatives for the protection of aluminum, and this opens up a number of possibilities for its use in a number of commercial applications.

Modern and contemporary art materials are generally prone to irreversible colour changes upon exposure to light and oxidizing agents. Graphene can be produced in thin large sheets, blocks ultraviolet light, and is impermeable to oxygen, moisture and corrosive agents; therefore, it has the potential to be used as a transparent layer for the protection of art objects in museums, during storage and transportation. Here we show that a single-layer or multilayer graphene veil, produced by chemical vapour deposition, can be deposited over artworks to protect them efficiently against colour fading, with a protection factor of up to 70%. We also show that this process is reversible since the graphene protective layer can be removed using a soft rubber eraser without causing any damage to the artwork. We have also explored a complementary contactless graphene-based route for colour protection that is based on the deposition of graphene on picture framing glass for use when the direct application of graphene is not feasible due to surface roughness or artwork fragility. Overall, the present results are a proof of concept of the potential use of graphene as an effective and removable protective advanced material to prevent colour fading in artworks.

The combination of two-dimensional materials (2D) into heterostructures enables their integration in tunable ultrathin devices. For applications in electronics and optoelectronics, direct growth of wafer-scale and vertically stacked graphene/hexagonal boron nitride (h-BN) heterostructures is vital. The fundamental problem, however, is the catalytically inert nature of h-BN substrates, which typically provide a low rate of carbon precursor breakdown and consequently a poor rate of graphene synthesis. Furthermore, out-of-plane deformations such as wrinkles are commonly seen in 2D materials grown by chemical vapor deposition (CVD). Herein, a wrinkle-facilitated route is developed for the fast growth of graphene/h-BN vertical heterostructures on Cu foils. The key advantage of this synthetic pathway is the exploitation of the increased reactivity from inevitable line defects arising from the CVD process, which can act as active sites for graphene nucleation. The resulted heterostructures are found to exhibit superlubric properties with increased bending stiffness, as well as directional electronic properties, as revealed from atomic force microscopy measurements. This work offers a brand-new route for the fast growth of Gr/h-BN heterostructures with practical scalability, thus propelling applications in electronics and nanomechanical systems.

Poly(methyl methacrylate) (PMMA) is a glassy engineering polymer that finds extensive use in a number of applications. Over the past decade, thin films of PMMA were combined with graphene or other two-dimensional materials for applications in the area of nanotechnology. However, the effect of size upon the mechanical behavior of this thermoplastic polymer has not been fully examined. In this work, we adopted a homemade nanomechanical device to assess the yielding and fracture characteristics of freestanding, ultrathin (180–280 nm) PMMA films of a loaded area as large as 0.3 mm2. The measured values of Young’s modulus and yield strength were found to be broadly similar to those measured in the bulk, but in contrast, all specimens exhibited a quite surprisingly high strain at failure (>20%). Detailed optical examination of the specimens during tensile loading showed clear evidence of craze development which however did not lead to premature fracture. This work may pave the way for the development of glassy thermoplastic films with high ductility at ambient temperatures.

Graphene and other two-dimensional materials (2DMs) have been shown to be promising candidates for the development of flexible and highly-sensitive strain sensors. However, the successful implementation of 2DMs in practical applications is slowed down by complex processing and still low sensitivity. Here, we report on a novel development of strain sensors based on Marangoni self-assemblies of graphene and of its hybrids with other 2DMs that can both withstand very large deformation and exhibit highly sensitive piezoresistive behaviour. By exploiting the Marangoni effect, reference films of self-assembled reduced graphene oxide (RGO) are first optimized, and the electromechanical behaviour has been assessed after deposition onto different elastomers demonstrating the potential of producing strain sensors suitable for different fields of application. Hybrid networks have been then prepared by adding hexagonal boron nitride (hBN) and fluorinated graphene (FGr) to the RGO dispersion. The hybrid integration of 2D materials is demonstrated to become a potential solution to increase substantially the sensitivity of the produced resistive strain sensors without compromising the mechanical integrity of the film. In fact, for large quasi-static deformations, a range of gauge factor values up to 2000 were demonstrated, while retaining a stable performance under cyclic deformations.

Graphene-related materials (GRMs) are subject to intensive investigations and considerable progress has been made in recent years in terms of safety assessment. However, limited information is available concerning the hazard potential of GRM-containing products such as graphene-reinforced composites. In the present study, we conducted a comprehensive investigation of the potential biological effects of particles released through an abrasion process from reduced graphene oxide (rGO)-reinforced composites of polyamide 6 (PA6), a widely used engineered thermoplastic polymer, in comparison to as-produced rGO. First, a panel of well-established in vitro models, representative of the immune system and possible target organs such as the lungs, the gut, and the skin, was applied. Limited responses to PA6-rGO exposure were found in the different in vitro models. Only as-produced rGO induced substantial adverse effects, in particular in macrophages. Since inhalation of airborne materials is a key occupational concern, we then sought to test whether the in vitro responses noted for these materials would translate into adverse effects in vivo. To this end, the response at 1, 7 and 28 days after a single pulmonary exposure was evaluated in mice. In agreement with the in vitro data, PA6-rGO induced a modest and transient pulmonary inflammation, resolved by day 28. In contrast, rGO induced a longer-lasting, albeit moderate inflammation that did not lead to tissue remodeling within 28 days. Taken together, the present study suggests a negligible impact on human health under acute exposure conditions of GRM fillers such as rGO when released from composites at doses expected at the workplace., This work was supported by the European Union (EU) 8th Framework Program for Research and Technological Development, Graphene Flagship project (H2020-FET- GrapheneCore2 - #785219 and H2020-FET- GrapheneCore3 - #881603). Part of this work was supported by the University of Trieste, the Agence Nationale de la Recherche (ANR) through the LabEx project Chemistry of Complex Systems (ANR-10-LABX- 0026_CSC), the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720 and the Swiss National Science Foundation (Grant 310030_169207).

Porous graphitic carbon electrodes were fabricated by laser scribing of commercial polyimide tape. The process was performed by a simple one-step procedure using visible wavelength laser irradiation from a low-cost hobbyist laser cutter. The obtained electrodes displayed a highly porous morphology, rich in three-dimensional (3D) interconnected networks and edge planes, suitable for electrochemical sensing applications. Spectral characterization by Raman and XPS spectroscopies revealed a crystalline graphitic carbon structure with high percentage of sp2 carbon bonds. Extensive electrochemical characterization performed with outer sphere [Ru(NH3)6]3+ and inner sphere [Fe(CN)6]4-, Fe2+/3+ and dopamine redox mediators showed quasi-reversible electron transfer at the graphitic carbon surface, mainly dominated by a mass diffusion process. Fast heterogeneous electron-transfer rates, higher than similar carbon-based materials and higher than other graphitic carbon electrodes produced by either visible or infrared laser irradiation, were obtained for these electrodes. Thin-layer transport mechanisms occurring in parallel to the main diffusion-limited mechanism were taken into consideration, but overall the observed enhanced electron-transfer rates effects were ascribed to the large specific surface area of the extended 3D porous network, rich in defects and edge-planes. The superior electrocatalytic properties of the fabricated electrodes allowed electrochemical differentiation between the biomarkers ascorbic acid, dopamine and uric acid in solution. The compatibility of fabricated electrodes with light-weight portable and handheld instrumentation makes such electrodes highly promising for the realisation of low-cost disposable sensing platforms for point-of-care applications.

The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic polyurethane/graphene foams by batch foaming. Solution blending was first adopted to disperse graphene nanoplatelets (GNP) in the elastomeric matrix. Then, a foaming process based on the use of supercritical CO2 was adopted to produce the microcellular TPU/GNP composite foams with graphene content up to 1 wt%. The EMI shielding behaviour of the TPU/GNP foams has been assessed in the THz range, and has revealed their potential in comparison with other graphene-filled foams presented in the literature, that exhibit similar specific shielding effectiveness but at much higher content of graphene-related materials (10-30 wt%).

Raman spectroscopy is employed to investigate the temperature dependence of the E2g phonon mode of single-layer, few-layer (FL), and bulk hexagonal boron nitride (hBN) sheets, situated over Si/SiO2...

Graphene has been widely used in the form of micro-flakes to fabricate composite materials with enhanced mechanical properties. Due to the small size of the inclusions and their random orientation within the matrix, the superior mechanical properties of graphene cannot be fully exploited. Recently, attempts have been made to fabricate nanolaminate composites by interleaving large sheets of chemical vapor deposition (CVD) monolayer graphene between thin layers of polymer matrices. However, CVD graphene is inevitably accompanied by wrinkles that are formed in the synthesis process, and it remains unknown how the wrinkles affect the mechanical properties of graphene. Here, we employ Brillouin Light Spectroscopy (BLS) to study the elastic moduli of CVD graphene by probing graphene/poly(methylmethacrylate) hybrid Bragg stacks at zero strain. We find the Young's and shear moduli of the CVD graphene, which has wrinkles in the form of sharp elevations of height of about 6 nm and a FWHM of ca. 30 nm, to be 680 and 290 GPa, respectively, with the former being about 30% lower than that of exfoliated, flat graphene. This work sheds light on the elastic properties of CVD graphene and provides a method that can be extended to studying the wrinkle-induced softening effect in other two-dimensional materials., Paper and Supporting Info

In this study, Polyurea/Formaldehyde (PUF) microcapsules containing Dicyclopentadiene (DCPD) as a healing substance were fabricated in situ and mixed at relatively low concentrations (&lt, 2 wt%) with a thermosetting polyurethane (PU) foam used in turn as the core of a sandwich structure. The shape memory (SM) effect depended on the combination of the behavior of the PU foam core and the shape memory polymer composite (SMPC) laminate skins. SMPC laminates were manufactured by moulding commercial carbon fiber-reinforced (CFR) prepregs with a SM polymer interlayer. At first, PU foam samples, with and without microcapsules, were mechanically tested. After, PU foam was inserted into the SMPC sandwich structure. Damage tests were carried out by compression and bending to deform and break the PU foam cells, and then assess the structure self-healing (SH) and recovery capabilities. Both SM and SH responses were rapid and thermally activated (120 °C). The CFR-SMPC skins and the PU foam core enable the sandwich to exhibit excellent SM properties with a shape recovery ratio up to 99% (initial configuration recovery). Moreover, the integration of microcapsules (0.5 wt%) enables SH functionality with a structural restoration up to 98%. This simple process makes this sandwich structure ideal for different industrial applications.

Aerogels have attracted significant attention recently due to their ultra-light weight porous structure, mechanical robustness, high electrical conductivity, facile scalability and their use as gas and oil absorbers. Herein, we examine the multi-functional properties of hybrid aerogels consisting of reduced graphene oxide (rGO) integrated with hexagonal boron nitride (hBN) platelets. Using a freeze-drying approach, hybrid aerogels are fabricated by simple mixing with various volume fractions of hBN and rGO up to 0.5/0.5 ratio. The fabrication method is simple, cost effective, scalable and can be extended to other 2D materials combinations. The hybrid rGO/hBN aerogels (HAs) are mechanically robust and highly compressible with mechanical properties similar to those of the pure rGO aerogel. We show that the presence of hBN in the HAs enhances the gas absorption capacities of formaldehyde and water vapour up to ~ 7 and > 8 times, respectively, as compared to pure rGO aerogel. Moreover, the samples show good recoverability, making them highly efficient materials for gas absorption applications and for the protection of artefacts such as paintings in storage facilities. Finally, even in the presence of large quantity of insulating hBN, the HAs are electrically conductive, extending the potential application spectrum of the proposed hybrids to the field of electro-thermal actuators. The work proposed here paves the way for the design and production of novel 2D materials combinations with tailored multi-functionalities suited for a large variety of modern applications.

ACS nano 15(6), 9638 - 9648 (2021). doi:10.1021/acsnano.0c10377, The synthesis of large, defect-free two-dimensional materials (2DMs) such as graphene is a major challenge toward industrial applications. Chemical vapor deposition (CVD) on liquid metal catalysts (LMCats) is a recently developed process for the fast synthesis of high-quality single crystals of 2DMs. However, up to now, the lack of in situ techniques enabling direct feedback on the growth has limited our understanding of the process dynamics and primarily led to empirical growth recipes. Thus, an in situ multiscale monitoring of the 2DMs structure, coupled with a real-time control of the growth parameters, is necessary for efficient synthesis. Here we report real-time monitoring of graphene growth on liquid copper (at 1370 K under atmospheric pressure CVD conditions) via four complementary in situ methods: synchrotron X-ray diffraction and reflectivity, Raman spectroscopy, and radiation-mode optical microscopy. This has allowed us to control graphene growth parameters such as shape, dispersion, and the hexagonal supra-organization with very high accuracy. Furthermore, the switch from continuous polycrystalline film to the growth of millimeter-sized defect-free single crystals could also be accomplished. The presented results have far-reaching consequences for studying and tailoring 2D material formation processes on LMCats under CVD growth conditions. Finally, the experimental observations are supported by multiscale modeling that has thrown light into the underlying mechanisms of graphene growth., Published by Soc., Washington, DC

Edible films were developed using whey protein concentrate (WPC) and a natural bio-polymer, namely bacterial cellulose (BC). BC was produced via fermentation from orange peels and subsequently acid-hydrolyzed to obtain BC nanowhiskers (BCNW) with high crystallinity (XRD analysis). Morphology of BCNW was analyzed by SEM, TEM, and AFM. WPC/BCNW film composites, containing different amounts of BCNW (0.5-15%, w/w) were developed and characterized. WPC/BCNW film composite was analyzed by Raman spectroscopy, indicating the successful incorporation and the homogenous distribution of BCNW into the WPC film matrix. Mechanical characterization showed that BCNW behaved as a reinforcing filler in the WPC film, increasing tensile strength and Young's modulus by 32% and 80%, respectively. In addition, water vapor permeability was reduced by 33.9% upon the addition of 0.5% BCNW. This study presented a sustainable approach towards the production of WPC films with improved tensile and water barrier properties, suggesting its potential application as a packaging material.

2D materials (2DMs) have now been established as unique and attractive alternatives to replace current technological materials in a number of applications. Chemical vapour deposition (CVD), is undoubtedly the most renowned technique for thin film synthesis and meets all requirements for automated large-scale production of 2DMs. Currently most CVD methods employ solid metal catalysts (SMCat) for the growth of 2DMs however their use has been found to induce structural defects such as wrinkles, fissures, and grain boundaries among others. On the other hand, liquid metal catalysts (LMCat), constitute a possible alternative for the production of defect-free 2DMs albeit with a small temperature penalty. This review is a comprehensive report of past attempts to employ LMCat for the production of 2DMs with emphasis on graphene growth. Special attention is paid to the underlying mechanisms that govern crystal growth and/or grain consolidation and film coverage. Finally, the advent of online metrology which is particularly effective for monitoring the chemical processes under LMCat conditions is also reviewed and certain directions for future development are drawn.

2D materials (2DMs) have now been established as unique and attractive alternatives to replace current technological materials in a number of applications. Chemical vapour deposition (CVD), is undoubtedly the most renowned technique for thin film synthesis and meets all requirements for automated large-scale production of 2DMs. Currently most CVD methods employ solid metal catalysts (SMCat) for the growth of 2DMs however their use has been found to induce structural defects such as wrinkles, fissures, and grain boundaries among others. On the other hand, liquid metal catalysts (LMCat), constitute a possible alternative for the production of defect-free 2DMs albeit with a small temperature penalty. This review is a comprehensive report of past attempts to employ LMCat for the production of 2DMs with emphasis on graphene growth. Special attention is paid to the underlying mechanisms that govern crystal growth and/or grain consolidation and film coverage. Finally, the advent of online metrology which is particularly effective for monitoring the chemical processes under LMCat conditions is also reviewed and certain directions for future development are drawn.

Recent findings have brought forward the potential of carbon nano-species, especially nanotubes and graphene, to impart exceptional multifunctional potential to cement, offering simultaneous enhancement of mechanical, fracture mechanical and electrical properties. While available knowledge on the topic is still limited, there is a complete absence of direct comparisons of the potential of the nano-species to improve strength and toughness and provide multifunctionality to the mortars. The study offers a comprehensive overview of these potentials, for mortars modified with pure graphene nanoplatelets and carbon nanotubes at consistent, directly comparable, concentrations up to 1.2 wt.%. Testing included flexure under pure bending moments, axial compression, electrical resistivity measurements and fracture tests under three point bending configuration, the latter were also independently assessed by acoustic emission. Differences in documented properties and optimal concentrations associated with improved mechanical performance were directly compared and rationalized in terms of nanospecies morphology. Dramatic, statistically consistent improvements in fracture behavior, up to 10-fold of control values, were documented for specific nanofiller concentrations, indicating an excellent potential of the material system for contemporary smart construction applications. An exceptionally favorable comparison of acoustic emission and fracture energy data confirmed that the non-destructive technique can independently assess the fracture performance of mortars with exceptional precision.

Controllable large-scale synthesis of two-dimensional materials (2DMs) such as graphene is a prerequisite for industrial applications. Chemical vapor deposition (CVD) is currently the most widespread synthesis method as it is efficient and easy to automatize. The process itself is quite complex and poorly understood, but it is generally believed to involve a number of distinct steps such as hydrocarbon decomposition into surface-bound intermediates, diffusion on the catalytic substrate, generation of nucleation points and, finally, graphene growth. In situ monitoring and tailoring of such a complex procedure is beneficial for understanding the growth kinetics and, eventually, for controlling the graphene growth. Herein, we report on a novel metrology system based on in situ reflectance spectroscopy that has been developed for real-time monitoring of surface changes during graphene growth on Cu foils at high operating temperatures. The implementation of this technique for extracting kinetic parameters of the growth process is presented. Furthermore, a microkinetic model of graphene growth based on density-functional theory (DFT) and the hindered translator / rotator model for enthalpy and entropy corrections is constructed and used to obtain a microscopic understanding of the apparent activation energy and related rate-determining steps in graphene growth.

High volume fraction carbon nanotube (CNT) composites (7.5&ndash, 16% vol.) were fabricated by the impregnation of CNT buckypapers into epoxy resin. To enhance the interfacial reaction with the epoxy resin, the CNTs were modified by two different treatments, namely, an epoxidation treatment and a chemical oxidation. The chemical treatment was found to result in CNT length severance and to affect the porosity of the buckypapers, having an important impact on the physico-mechanical properties of the nanocomposites. Overall, the mechanical, electrical, and thermal properties of the impregnated buckypapers were found to be superior of the neat epoxy resin, offering an attractive combination of mechanical, electrical, and thermal properties for multifunctional composites.

Liquid metal catalysts (LMCats) (e.g., molten copper) can provide a new mass-production method for two-dimensional materials (2DMs) (e.g., graphene) with significantly higher quality and speed and lower energy and material consumption. To reach such technological excellence, the physicochemical properties of LMCats and the growth mechanisms of 2DMs on LMCats should be investigated. Here, we report the development of a chemical vapor deposition (CVD) reactor which allows the investigation of ongoing chemical reactions on the surface of a molten metal at elevated temperatures and under reactive conditions. The surface of the molten metal is monitored simultaneously using synchrotron x-ray scattering, Raman spectroscopy, and optical microscopy, thereby providing complementary information about the atomic structure and chemical state of the surface. To enable in situ characterization on a molten substrate at high temperatures (e.g., similar to 1370 K for copper), the optical and x-ray windows need to be protected from the evaporating LMCat, reaction products, and intense heat. This has been achieved by creating specific gas-flow patterns inside the reactor. The optimized design of the reactor has been achieved using multiphysics COMSOL simulations, which take into account the heat transfer, fluid dynamics, and transport of LMCat vapor inside the reactor. The setup has been successfully tested and is currently used to investigate the CVD growth of graphene on the surface of molten copper under pressures ranging from medium vacuum up to atmospheric pressure. Published under license by AIP Publishing.