Search

Achieving simultaneous lasing of photons and phonons in optomechanical setups has great potential for applications in quantum information processing, high precision sensing and the design of hybrid photonic-phononic devices. Here, we explore this possibility with an optomechanical system driven by a two-tone field. Whenever the difference between the driving frequencies matches the associated mechanical frequency, the photon and phonon populations are found to achieve steady-state coherent oscillations, demonstrating a dual lasing phenomenon. Such drive-tone resonance condition can synchronize the phases of the photon and phonon fields, which facilitates a robust simultaneous lasing. Here, we provide analytical insights into the joint amplification of the optical and mechanical modes, and further confirm the dual lasing phenomenon by numerically calculating the relevant correlation functions and the power spectrum. Our setup, consisting of a single optomechanical cavity, is simpler than previous realizations of dual lasing and provides a clean picture of the underlying mechanisms. Our work thus paves the way for the development of novel strategies for the optimisation of optomechanical interactions through tailored driving schemes., Comment: 10 pages, 6 figures, SM in form of appendices. Feedback is invaluable in guiding us to enhance and refine our work

The accurate characterisation of energy exchanges between nanoscale quantum systems and their environments is of paramount importance for quantum technologies, and central to quantum thermodynamics. Here, we show that, in order to accurately approximate steady-state heat currents via perturbative master equations, the coupling-induced reorganisation correction to the system's energy must be carefully taken into account. Not doing so, may yield sizeable errors, especially at low, or even moderate temperatures. In particular, we show how a 'reorganised master equation' can produce very accurate estimates for the heat currents when the reorganisation energy is weak and one works with environments with a broad spectrum. Notably, such master equation outperforms its 'non-reorganised' counterpart in the calculation of heat currents, at modelling dynamics, and at correctly capturing equilibration. This is so even if both types of equation are derived to the same order of perturbation theory. Most importantly, working with reorganised master equations does not involve additional complications when compared with alternative approaches. Also, invoking the secular approximation to secure thermodynamic consistency does not compromise their precision., Comment: 8 pages, 3 figures; comments welcome

Often, the microscopic interaction mechanism of an open quantum system gives rise to a `counter term' which renormalises the system Hamiltonian. Such term compensates for the distortion of the system's potential due to the finite coupling to the environment. Even if the coupling is weak, the counter term is, in general, not negligible. Similarly, weak-coupling master equations feature a number of `Lamb-shift terms' which, contrary to popular belief, cannot be neglected. Yet, the practice of vanishing both counter term and Lamb shift when dealing with master equations is almost universal; and, surprisingly, it can yield better results. By accepting the conventional wisdom, one may approximate the dynamics more accurately and, importantly, the resulting master equation is guaranteed to equilibrate to the correct steady state in the high-temperature limit. In this paper we discuss why is this the case. Specifically, we show that, if the potential distortion is small -- but non-negligible -- the counter term does not influence any dissipative processes to second order in the coupling. Furthermore, we show that, for large environmental cutoff, the Lamb-shift terms approximately cancel any coherent effects due to the counter term -- this renders the combination of both contributions irrelevant in practice. We thus provide precise conditions under which the open-system folklore regarding Lamb shift and counter terms is rigorously justified., Comment: 21 pages (13 + 8), 2 figures; comments welcome

We develop a general perturbative theory of finite-coupling quantum thermometry up to second order in probe-sample interaction. By assumption, the probe and sample are in thermal equilibrium, so the probe is described by the mean-force Gibbs state. We prove that the ultimate thermometric precision can be achieved - to second order in the coupling - solely by means of local energy measurements on the probe. Hence, seeking to extract temperature information from coherences or devising adaptive schemes confers no practical advantage in this regime. Additionally, we provide a closed-form expression for the quantum Fisher information, which captures the probe's sensitivity to temperature variations. Finally, we benchmark and illustrate the ease of use of our formulas with two simple examples. Our formalism makes no assumptions about separation of dynamical timescales or the nature of either the probe or the sample. Therefore, by providing analytical insight into both the thermal sensitivity and the optimal measurement for achieving it, our results pave the way for quantum thermometry in setups where finite-coupling effects cannot be ignored., Comment: 15 + 7 pages, 2 figures, accepted in Quantum

Precise temperature measurements on systems of few ultracold atoms is of paramount importance in quantum technologies, but can be very resource-intensive. Here, we put forward an adaptive Bayesian framework that substantially boosts the performance of cold atom temperature estimation. Specifically, we process data from real and simulated release--recapture thermometry experiments on few potassium atoms cooled down to the microkelvin range in an optical tweezer. From simulations, we demonstrate that adaptively choosing the release--recapture times to maximise information gain does substantially reduce the number of measurements needed for the estimate to converge to a final reading. Unlike conventional methods, our proposal systematically avoids capturing and processing uninformative data. We also find that a simpler non-adaptive method exploiting all the a priori information can yield competitive results, and we put it to the test on real experimental data. Furthermore, we are able to produce much more reliable estimates, especially when the measured data are scarce and noisy, and they converge faster to the real temperature in the asymptotic limit. Importantly, the underlying Bayesian framework is not platform-specific and can be adapted to enhance precision in other setups, thus opening new avenues in quantum thermometry., Comment: 9 + 5 pages, 7 figures, updated version, appendices added

There exist severe limitations on the accuracy of low-temperature thermometry, which poses a major challenge for future quantum-technological applications. Low-temperature sensitivity might be manipulated by tailoring the interactions between probe and sample. Unfortunately, the tunability of these interactions is usually very restricted. Here, we focus on a more practical solution to boost thermometric precision -- driving the probe. Specifically, we solve for the limit cycle of a periodically modulated linear probe in an equilibrium sample. We treat the probe-sample interactions \textit{exactly} and hence, our results are valid for arbitrarily low temperatures $ T $ and any spectral density. We find that weak near-resonant modulation strongly enhances the signal-to-noise ratio of low-temperature measurements, while causing minimal back action on the sample. Furthermore, we show that near-resonant driving changes the power law that governs thermal sensitivity over a broad range of temperatures, thus `bending' the fundamental precision limits and enabling more sensitive low-temperature thermometry. We then focus on a concrete example -- impurity thermometry in an atomic condensate. We demonstrate that periodic driving allows for a sensitivity improvement of several orders of magnitude in sub-nanokelvin temperature estimates drawn from the density profile of the impurity atoms. We thus provide a feasible upgrade that can be easily integrated into low-$T$ thermometry experiments., Comment: 9 + 6 pages, 3 figures, accepted version

A paradigm shift in quantum thermometry is proposed. To date, thermometry has relied on local estimation, which is useful to reduce statistical fluctuations once the temperature is very well known. In order to estimate temperatures in cases where few measurement data or no substantial prior knowledge are available, we build instead a theory of global quantum thermometry. Based on scaling arguments, a mean logarithmic error is shown here to be the correct figure of merit for thermometry. Its full minimisation provides an operational and optimal rule to post-process measurements into a temperature reading, and it establishes a global precision limit. We apply these results to the simulated outcomes of measurements on a spin gas, finding that the local approach can lead to biased temperature estimates in cases where the global estimator converges to the true temperature. The global framework thus enables a reliable approach to data analysis in thermometry experiments., Comment: 5 + 8 pages, 1 + 1 figures. Accepted in Physical Review Letters

Master equations are a vital tool to model heat flow through nanoscale thermodynamic systems. Most practical devices are made up of interacting sub-system, and are often modelled using either local master equations (LMEs) or global master equations (GMEs). While the limiting cases in which either the LME or the GME breaks down are well understood, there exists a 'grey area' in which both equations capture steady-state heat currents reliably, but predict very different transient heat flows. In such cases, which one should we trust? Here, we show that, when it comes to dynamics, the local approach can be more reliable than the global one for weakly interacting open quantum systems. This is due to the fact that the secular approximation, which underpins the GME, can destroy key dynamical features. To illustrate this, we consider a minimal transport setup and show that its LME displays exceptional points (EPs). These singularities have been observed in a superconducting-circuit realisation of the model [1]. However, in stark contrast to experimental evidence, no EPs appear within the global approach. We then show that the EPs are a feature built into the Redfield equation, which is more accurate than the LME and the GME. Finally, we show that the local approach emerges as the weak-interaction limit of the Redfield equation, and that it entirely avoids the secular approximation., Comment: 24 pages, 3 figures

The reaction-coordinate mapping is a useful technique to study complex quantum dissipative dynamics into structured environments. In essence, it aims to mimic the original problem by means of an 'augmented system', which includes a suitably chosen collective environmental coordinate---the 'reaction coordinate'. This composite then couples to a simpler 'residual reservoir' with short-lived correlations. If, in addition, the residual coupling is weak, a simple quantum master equation can be rigorously applied to the augmented system, and the solution of the original problem just follows from tracing out the reaction coordinate. But, what if the residual dissipation is strong? Here we consider an exactly solvable model for heat transport---a two-node linear "quantum wire" connecting two baths at different temperatures. We allow for a structured spectral density at the interface with one of the reservoirs and perform the reaction-coordinate mapping, writing a perturbative master equation for the augmented system. We find that: (a) strikingly, the stationary state of the original problem can be reproduced accurately by a weak-coupling treatment even when the residual dissipation on the augmented system is very strong; (b) the agreement holds throughout the entire dynamics under large residual dissipation in the overdamped regime; (c) and that such master equation can grossly overestimate the stationary heat current across the wire, even when its non-equilibrium steady state is captured faithfully. These observations can be crucial when using the reaction-coordinate mapping to study the largely unexplored strong-coupling regime in quantum thermodynamics., Comment: 12 pages, 4 figures; comments welcome; references updated

When a quantum system is coupled to several heat baths at different temperatures, it eventually reaches a non-equilibrium steady state featuring stationary internal heat currents. These currents imply that entropy is continually being produced in the system at a constant rate. In this paper we apply phase-space techniques to the calculation of the Wigner entropy production on general linear networks of harmonic nodes. Working in the ubiquitous limit of weak internal coupling and weak dissipation, we obtain simple closed-form expressions for the entropic contribution of each individual quasi-probability current. Our analysis highlights the essential role played by the internal unitary interactions (node-node couplings) in maintaining a non-equilibrium steady-state and hence a finite entropy production rate. We also apply this formalism to the paradigmatic problem of energy transfer through a chain of oscillators subject to self-consistent internal baths that can be used to tune the transport from ballistic to diffusive. We find that the entropy production scales with different power law behaviors in the ballistic and diffusive regimes, hence allowing us to quantify what is the "entropic cost of diffusivity."

Controlling and measuring the temperature in different devices and platforms that operate in the quantum regime is, without any doubt, essential for any potential application. In this review, we report the most recent theoretical developments dealing with accurate estimation of very low temperatures in quantum systems. Together with the emerging experimental techniques and developments of measurement protocols, the theory of quantum thermometry will decisively impinge and shape the forthcoming quantum technologies. While current quantum thermometric methods differ greatly depending on the experimental platform, the achievable precision, and the temperature range of interest, the theory of quantum thermometry is built under a unifying framework at the crossroads of quantum metrology, open quantum systems, and quantum many-body physics. At a fundamental level, theoretical quantum thermometry is concerned with finding the ultimate bounds and scaling laws that limit the precision of temperature estimation for systems in and out-of-thermal equilibrium. At a more practical level, it provides tools to formulate precise, yet feasible, thermometric protocols for relevant experimental architectures. Last but not least, the theory of quantum thermometry examines genuine quantum features, like entanglement and coherence, for their exploitation in enhanced-resolution thermometry., Comment: 58 pages, 15 figures; published version

The performance enhancements observed in various models of continuous quantum thermal machines have been linked to the buildup of coherences in a preferred basis. But, is this connection always an evidence of `quantum-thermodynamic supremacy'? By force of example, we show that this is not the case. In particular, we compare a power-driven three-level continuous quantum refrigerator with a four-level combined cycle, partly driven by power and partly by heat. We focus on the weak driving regime and find the four-level model to be superior since it can operate in parameter regimes in which the three-level model cannot, it may exhibit a larger cooling rate, and, simultaneously, a better coefficient of performance. Furthermore, we find that the improvement in the cooling rate matches the increase in the stationary quantum coherences exactly. Crucially, though, we also show that the thermodynamic variables for both models follow from a classical representation based on graph theory. This implies that we can build incoherent stochastic-thermodynamic models with the same steady-state operation or, equivalently, that both coherent refrigerators can be emulated classically. More generally, we prove this for any N-level weakly driven device with a `cyclic' pattern of transitions. Therefore, even if coherence is present in a specific quantum thermal machine, it is often not essential to replicate the underlying energy conversion process., Comment: 13 pages, 4 figures; references updated; appendix added

We introduce a novel minimally-disturbing method for sub-nK thermometry in a Bose-Einstein condensate (BEC). Our technique is based on the Bose-polaron model; namely, an impurity embedded in the BEC acts as the thermometer. We propose to detect temperature fluctuations from measurements of the position and momentum of the impurity. Crucially, these cause minimal back-action on the BEC and hence, realize a non-demolition temperature measurement. Following the paradigm of the emerging field of \textit{quantum thermometry}, we combine tools from quantum parameter estimation and the theory of open quantum systems to solve the problem in full generality. We thus avoid \textit{any} simplification, such as demanding thermalization of the impurity atoms, or imposing weak dissipative interactions with the BEC. Our method is illustrated with realistic experimental parameters common in many labs, thus showing that it can compete with state-of-the-art \textit{destructive} techniques, even when the estimates are built from the outcomes of accessible (sub-optimal) quadrature measurements., Comment: New references added

The problem of estimating the frequency of a two-level atom in a noisy environment is studied. Our interest is to minimise both the energetic cost of the protocol and the statistical uncertainty of the estimate. In particular, we prepare a probe in a "GHZ-diagonal" state by means of a sequence of qubit gates applied on an ensemble of $ n $ atoms in thermal equilibrium. Noise is introduced via a phenomenological time-nonlocal quantum master equation, which gives rise to a phase-covariant dissipative dynamics. After an interval of free evolution, the $ n $-atom probe is globally measured at an interrogation time chosen to minimise the error bars of the final estimate. We model explicitly a measurement scheme which becomes optimal in a suitable parameter range, and are thus able to calculate the total energetic expenditure of the protocol. Interestingly, we observe that scaling up our multipartite entangled probes offers no precision enhancement when the total available energy $ \mathcal{E} $ is limited. This is at stark contrast with standard frequency estimation, where larger probes---more sensitive but also more "expensive" to prepare---are always preferred. Replacing $ \mathcal{E} $ by the resource that places the most stringent limitation on each specific experimental setup, would thus help to formulate more realistic metrological prescriptions., Comment: 16 pages, 3 figures, published version

It is "conventional wisdom" that the uncertainty of local temperature measurements on equilibrium systems diverges exponentially fast as their temperature $T$ drops to zero. In contrast, some exactly solvable models showcase a more benign power-law-like scaling, when only a small non-equilibrium fragment of the equilibrium system is measured. Does this mean that a part may contain more information about the global temperature than the whole? Certainly not. Here, we resolve this apparent paradox. First, we prove that local quantum thermometry at low $T$ is exponentially inefficient in non-critical, gapped, and infinite spin and harmonic lattices. In contrast, we show through an open-system analysis, that the thermal sensitivity of a harmonic thermometer (probe) jointly equilibrated with a reservoir (sample) by means of an Ohmic coupling scheme, displays a distinctive power-law-like behavior as $T \rightarrow 0$. To reconcile these two results, we exploit the fact that local thermometry on a harmonic chain may be viewed as a temperature measurement on an oscillator in a discretized harmonic environment: A gapped translationally invariant chain (for which low--$T$ thermometry is indeed exponentially inefficient) maps into a non-standard open-system model where the low-frequency modes of the sample decouple from the probe. On the contrary, a gapless instance of such chain gives rise to the canonical Ohmic probe-sample interaction, which does include sample modes of arbitrarily low frequency. In this way, we show that the power-law-like thermometric performance observed in typical dissipative models stems from the fact that these are gapless and, as such, not subjected to the exponential limitations of their gapped counterparts. The key feature of many-body systems, when it comes to the ultimate limitations of low--$T$ thermometry, is thus whether or not their energy spectrum is gapped., Comment: 9+8 pages, 6 figures; v3: Accepted version; see also related work by P.P. Hofer et al. at arXiv:1711.09827

When deriving a master equation for a multipartite weakly-interacting open quantum systems, dissipation is often addressed \textit{locally} on each component, i.e. ignoring the coherent couplings, which are later added `by hand'. Although simple, the resulting local master equation (LME) is known to be thermodynamically inconsistent. Otherwise, one may always obtain a consistent \textit{global} master equation (GME) by working on the energy basis of the full interacting Hamiltonian. Here, we consider a two-node `quantum wire' connected to two heat baths. The stationary solution of the LME and GME are obtained and benchmarked against the exact result. Importantly, in our model, the validity of the GME is constrained by the underlying secular approximation. Whenever this breaks down (for resonant weakly-coupled nodes), we observe that the LME, in spite of being thermodynamically flawed: (a) predicts the correct steady state, (b) yields the exact asymptotic heat currents, and (c) reliably reflects the correlations between the nodes. In contrast, the GME fails at all three tasks. Nonetheless, as the inter-node coupling grows, the LME breaks down whilst the GME becomes correct. Hence, the global and local approach may be viewed as \textit{complementary} tools, best suited to different parameter regimes., Comment: 13 pages, 3 figures; updated list of references; see also the related work by Patrick P. Hofer et al. appearing in the same arXiv mailing as this article

The connection between the Leggett-Garg inequality and optimal scenarios from the point of view of quantum metrology is investigated for perfect and noisy general dichotomic measurements. In this context, we show that the Fisher information can be expressed in terms of quantum temporal correlations. This connection allows us to associate scenarios with relatively high Fisher information to scenarios in which the Leggett-Garg inequality is violated. We thus demonstrate a qualitative and, to some extent, quantitative link between measurement invasiveness and metrological performance. Finally, we illustrate our results by using a specific model for spin systems., Comment: 6 pages, 3 figures; close to published version

We consider the problem of estimating the temperature $ T $ of a very cold equilibrium sample. The temperature estimates are drawn from measurements performed on a quantum probe strongly coupled to it. We model this scenario by resorting to the canonical Caldeira-Leggett Hamiltonian and find analytically the exact stationary state of the probe for arbitrary coupling strength. In general, the probe does not reach thermal equilibrium with the sample, due to their non-perturbative interaction. We argue that this is advantageous for low temperature thermometry, as we show in our model that: (i) The thermometric precision at low $ T $ can be significantly enhanced by strengthening the probe-sampling coupling, (ii) the variance of a suitable quadrature of our Brownian thermometer can yield temperature estimates with nearly minimal statistical uncertainty, and (iii) the spectral density of the probe-sample coupling may be engineered to further improve thermometric performance. These observations may find applications in practical nanoscale thermometry at low temperatures---a regime which is particularly relevant to quantum technologies., Comment: 12 pages, 3 figures; revised version; Accepted in Phys. Rev. A

We investigate sensing of magnetic fields using quantum spin chains at finite temperature and exploit quantum phase crossovers to improve metrological bounds on the estimation of the chain parameters. In particular, we analyze the $ XX $ spin chain and show that the magnetic sensitivity of this system is dictated by its adiabatic magnetic susceptibility, which scales extensively (linearly) in the number of spins $ N $. Next, we introduce an iterative feedforward protocol that actively exploits features of quantum phase crossovers to enable super-extensive scaling of the magnetic sensitivity. Moreover, we provide experimentally realistic observables to saturate the quantum metrological bounds. Finally, we also address magnetic sensing in the Heisenberg $ XY $ spin chain., Comment: 8 pages, 4 figures; revised

The problem of estimating an unknown phase $ \varphi $ using two-level probes in the presence of unital phase-covariant noise and using finite resources is investigated. We introduce a simple model in which the phase-imprinting operation on the probes is realized by a unitary transformation with a randomly sampled generator. We determine the optimal phase sensitivity in a sequential estimation protocol, and derive a general (tight-fitting) lower bound. The sensitivity grows quadratically with the number of applications $ N $ of the phase-imprinting operation, then attains a maximum at some $ N_\text{opt} $, and eventually decays to zero. We provide an estimate of $ N_\text{opt} $ in terms of accessible geometric properties of the noise and illustrate its usefulness as a guideline for optimizing the estimation protocol. The use of passive ancillas and of entangled probes in parallel to improve the phase sensitivity is also considered. We find that multi-probe entanglement may offer no practical advantage over single-probe coherence if the interrogation at the output is restricted to measuring local observables., Comment: 10 pages, 5 figures; published version

We present a study of the performance of endoreversible thermal machines optimized with respect to the thermodynamic force associated with the cold bath in the regime of small thermodynamic forces. These thermal machines can work either as an engine or as a refrigerator. We analyze how the optimal performances are determined by the dependence of the thermodynamic flux on the forces. The results are motivated and illustrated with a quantum model, the three level maser, and explicit analytical expressions of the engine efficiency as a function of the system parameters are given., Comment: 7 pages, 9 figures

Once in its non-equilibrium steady state, a nanoscale system coupled to several heat baths may be thought-of as a quantum heat pump. Depending on the direction of its stationary heat flows it may function as e.g. a refrigerator or a heat transformer. These continuous heat devices can be arbitrarily complex multipartite systems, and yet their working principle is always the same: They are made up of several elementary three-level stages operating in parallel. As a result, it is possible to devise external black-box testing strategies to learn about their functionality and performance regardless of any internal details. In particular, one such heat pump can be tested by coupling a two-level spin to one of its contact transitions. The steady state of this external probe contains information about the presence of heat leaks and internal dissipation in the device, and also, about the direction of its steady-state heat currents. Provided that the irreversibility of the heat pump is low, one can further estimate its coefficient of performance. These techniques may find applications in the emerging field of quantum thermal engineering, as they facilitate the diagnosis and design optimization of complex thermodynamic cycles., Comment: 10 pages, 3 figures; revised version; to appear in Entropy, Special Issue "Quantum Thermodynamics"

The ability to initialize quantum registers in pure states lies at the core of many applications of quantum technologies, from sensing to quantum information processing and computation. In this paper, we tackle the problem of increasing the polarization bias of an ensemble of two-level register spins by means of joint coherent manipulations, involving a second ensemble of ancillary spins and energy dissipation into an external heat bath. We formulate this spin refrigeration protocol, akin to algorithmic cooling, in the general language of quantum feedback control, and identify the relevant thermodynamic variables involved. Our analysis is two-fold: on the one hand, we assess the optimality of the protocol by means of suitable figures of merit, accounting for both its work cost and effectiveness; on the other hand, we characterise the nature of correlations built up between the register and the ancilla. In particular, we observe that neither the amount of classical correlations nor the quantum entanglement seem to be key ingredients fuelling our spin refrigeration protocol. We report instead that a more general indicator of quantumness beyond entanglement, the so-called quantum discord, is closely related to the cooling performance., Comment: 13 pages, 3 figures. Published in "Entropy" Special Issue on "Quantum Thermodynamics"

The direction of the steady-state heat currents across a generic quantum system connected to multiple baths may be engineered so as to realize virtually any thermodynamic cycle. In spite of their versatility such continuous energy-conversion systems are generally unable to operate at maximum efficiency due to non-negligible sources of irreversible entropy production. In this paper we introduce a minimal model of irreversible absorption chiller. We identify and characterize the different mechanisms responsible for its irreversibility, namely heat leaks and internal dissipation, and gauge their relative impact in the overall cooling performance. We also propose reservoir engineering techniques to minimize these detrimental effects. Finally, by looking into a known three-qubit embodiment of the absorption cooling cycle, we illustrate how our simple model may help to pinpoint the different sources of irreversibility naturally arising in more complex practical heat devices., Comment: 9 pages, 3 figures; improved introduction and discussion

The unknown temperature of a sample may be estimated with minimal disturbance by putting it in thermal contact with an individual quantum probe. If the interaction time is sufficiently long so that the probe thermalizes, the temperature can be read out directly from its steady state. Here we prove that the optimal quantum probe, acting as a thermometer with maximal thermal sensitivity, is an effective two-level atom with a maximally degenerate excited state. When the total interaction time is insufficient to produce full thermalization, we optimize the estimation protocol by breaking it down into sequential stages of probe preparation, thermal contact and measurement. We observe that frequently interrogated probes initialized in the ground state achieve the best performance. For both fully and partly thermalized thermometers, the sensitivity grows significantly with the number of levels, though optimization over their energy spectrum remains always crucial., Comment: 7 pages, 2 figures. Discussion improved and expanded

The derivation of general performance benchmarks is important in the design of highly optimized heat engines and refrigerators. To obtain them, one may model phenomenologically the leading sources of irreversibility ending up with results which are model-independent, but limited in scope. Alternatively, one can take a simple physical system realizing a thermodynamic cycle and assess its optimal operation from a complete microscopic description. We follow this approach in order to derive the coefficient of performance at maximum cooling rate for \textit{any} endoreversible quantum refrigerator. At striking variance with the \textit{universality} of the optimal efficiency of heat engines, we find that the cooling performance at maximum power is crucially determined by the details of the specific system-bath interaction mechanism. A closed analytical benchmark is found for endoreversible refrigerators weakly coupled to unstructured bosonic heat baths: an ubiquitous case study in quantum thermodynamics., Comment: 4+3 pages, 2 figures. Presentation improved and expanded

It is well known that heat pumps, while being all limited by the same basic thermodynamic laws, may find realization on systems as "small" and "quantum" as a three-level maser. In order to quantitatively assess how the performance of these devices scales with their size, we design generalized $N$-dimensional ideal heat pumps by merging $N-2$ elementary three-level stages. We set them to operate in the absorption chiller mode between given hot and cold baths, and study their maximum achievable cooling power and the corresponding efficiency as a function of $N$. While the efficiency at maximum power is roughly size-independent, the power itself slightly increases with the dimension, quickly saturating to a constant. Thus, interestingly, scaling up autonomous quantum heat pumps does not render a significant enhancement beyond the optimal double-stage configuration., Comment: 7 pages, 3 figures

Thermodynamics is a branch of science blessed by an unparalleled combination of generality of scope and formal simplicity. Based on few natural assumptions together with the four laws, it sets the boundaries between possible and impossible in macroscopic aggregates of matter. This triggered groundbreaking achievements in physics, chemistry and engineering over the last two centuries. Close analogues of those fundamental laws are now being established at the level of individual quantum systems, thus placing limits on the operation of quantum-mechanical devices. Here we study quantum absorption refrigerators, which are driven by heat rather than external work. We establish thermodynamic performance bounds for these machines and investigate their quantum origin. We also show how those bounds may be pushed beyond what is classically achievable, by suitably tailoring the environmental fluctuations via quantum reservoir engineering techniques. Such superefficient quantum-enhanced cooling realises a promising step towards the technological exploitation of autonomous quantum refrigerators., Comment: 12 pages, 4 figures. Published in Scientific Reports (NPG)

The stationary multipartite entanglement between three interacting harmonic oscillators subjected to decoherence is analyzed in the largely unexplored non-equilibrium strong dissipation regime. We compute the exact asymptotic Gaussian state of the system and elucidate its separability properties, qualitatively assessing the regions of the space of parameters in which fully inseparable states are generated. Interestingly, the sharing structure of bipartite entanglement is seen to degrade as dissipation increases even for very low temperatures, at which the system approaches its ground state. We also find that establishing stationary energy currents across the harmonic chain does not correspond with the build-up of biseparable steady states, which relates instead just to the relative intensity of thermal fluctuations., Comment: 9 pages, 5 figures; accepted

An implementation of quantum absorption chillers with three qubits has been recently proposed, that is ideally able to reach the Carnot performance regime. Here we study the working efficiency of such self-contained refrigerators, adopting a consistent treatment of dissipation effects. We demonstrate that the coefficient of performance at maximum cooling power is upper bounded by 3/4 of the Carnot performance. The result is independent of the details of the system and the equilibrium temperatures of the external baths. We provide design prescriptions that saturate the bound in the limit of a large difference between the operating temperatures. Our study suggests that delocalized dissipation, which must be taken into account for a proper modelling of the machine-baths interaction, is a fundamental source of irreversibility which prevents the refrigerator from approaching the Carnot performance arbitrarily closely in practice. The potential role of quantum correlations in the operation of these machines is also investigated., Comment: 9 pages, 5 figures; published version

In this work, we calculate the exact asymptotic quantum correlations between two interacting non-resonant harmonic oscillators in a common Ohmic bath. We derive \emph{analytical formulas} for the covariances, fully describing any Gaussian stationary state of the system, and use them to study discord and entanglement in the strong and weak dissipation regimes. We discuss the rich structure of the discord of the stationary separable states arising in the strong dissipation regime. Also under strong dissipation, when the modes are not mechanically coupled, these may entangle only through their interaction with the \emph{common} environment. Interestingly enough, this stationary entanglement is only present within a \emph{finite band of frequencies} and increases with the dissipation rate. In addition, robust entanglement between \emph{detuned} oscillators is observed at low temperature., Comment: 4 pages, 5 figures. References updated. Some changes made. Submitted