Search

A double discharge technique was used in the investigation. An initial discharge established between parallel arrays of tungsten pin electrodes was followed, after a variable time delay, by a high voltage (180 kV), short duration (50 nsec) secondary discharge between two aluminum main electrodes. Metal compounds, including metal alkyls, hydrides, and halides, were used to obtain the required metal atom concentrations. Twenty-four new laser transitions involving 9 different metal atoms were observed. The observed relations are shown in a number of partial energy-level diagrams.

A description is given of the first results obtained with a new shock tube-electron beam facility designed to provide a versatile means for the systematic search for laser operation among several candidate metal atom-oxidizer systems. According to the current experimental approach, metal atoms are obtained in the vapor phase by the dissociation of metal compounds. A shock tube is employed to provide a short duration flow through an array of 29 supersonic flow-mixing nozzles. A high energy electron accelerator is used for the rapid initiation of chemical reaction in a mixed flow of encapsulated metal and oxidizer.

Measurements of vibrational energy transfer probabilities are presented for the temperature range 205-360 K for HF-DF, HF-CO2, and DF-CO2 gas mixtures. The present results provide an accurate determination of the inverse temperature dependence of the energy transfer probabilities exhibited by these systems. Large deactivation effects caused by HF (DF) polymers were observed for temperatures below 220 K.

The laser-excited fluorescence method has been employed to determine the rate constants for vibrational relaxation of the O3 (010), O3 (100) and O3 (001) levels at 298 K. The fluorescence observations from the O3 (010) level provide direct measurements of the rate for intermode vibrational energy transfer from the coupled nu sub 1 and nu sub 3 modes to the nu sub 2 mode. The slowness of this process indicates the likelihood that the nu sub 1 and/or nu sub 3 modes (rather than the nu sub 2 mode) play a predominant role in the laser-enhanced reaction between vibrationally excited O3 and NO at 298 K.

The laser excited fluorescence method has been employed to determine rate constants for V to V, R and V to R, T relaxation HF (nu = 1) and DF(nu = 1) by CO2 over the temperature range from 295 to 670 K. The self-deactivation rates for HF(nu = 1) and DF(nu = 1) by ground state molecules and the rate of V to V, R transfer from HF(nu = 1) and DF(nu = 1) to the CO2 (00/0/1) state exhibit a marked decrease with increasing temperature. The results provide additional evidence for the conversion of the large vibrational energy defects of the present systems into rotational motion of the hydrogen halide under the influence of a sizable attractive intermolecular potential well.

The laser excited fluorescence method has been employed to determine rate constants for vibrational relaxation of O3(101) molecules by O3, O2, CO2, H2, D2, CH4, N2, He, and Ar collision partners at 298 K. Excitation of the O3(001) level by absorption of laser transitions on the CO2 9.5-micron band have permitted the first measurements of vibrational relaxation on O3.

The enhancement in reaction rate between O3 and NO is studied for the case of O3 vibrationally excited by a CO2 laser. Chemiluminescence observations of a vibrationally excited and an electronically excited nitrogen dioxide reaction product provide information on the separate contributions to the overall reaction rate of these two reactive channels. The contribution of the stretching and bending modes of O3 to the reaction rate enhancement is also discussed. In addition, consideration is given to the nonreactive vibrational deactivation of vibrationally excited O3.

The reported investigation is a continuation of a study conducted by Chou and Cool (1976). The experimental results discussed are partly related to laser transitions in Cd(I), Cd(II), and Zn(II). Laser transitions in Fe(I), Ni(I), Sn(I), Te(I), and V(I) are also considered along with the observation of a laser pulse with two peaks in connection with the study of laser transitions in Se(I). Experiments related to prospective visible laser operation in thallium at 6550 and 6714 are also discussed, giving attention to spontaneous emission measurements at 6550 and 5350 A, the effects of additive molecules, and laser cavity experiments at 6550 and 6714 A.

An investigation was conducted of the two reactions: Sc + F2 yields ScF(asterisk) + F and Y + Cl2 yields YCl(asterisk) + Cl. Experiments were designed for studying the reactions under the relatively high pressure conditions (5-20 torr) appropriate for chemical laser operation. A shock tube was used to provide a short duration flow through a supersonic nozzle array. Shock wave heating is used to dissociate the ScCl3 or YCl3 at temperatures of about 6000 K, before the gases are accelerated and expanded through the supersonic nozzle array. The expanded primary flow is then mixed with a secondary flow of F2 introduced through slots at the trailing edge of each nozzle blade. Graphs show the temporal behavior of the visible spontaneous emission over the range from 3000 to 9000 A for a typical test condition, a microdensitometer tracing of the visible emission over the range from 4000 to 7000 A, and the spontaneous emission from ScF(asterisk) obtained by computer image processing of intensity data.

Using the CO2 laser induced fluorescence technique at 298 K for excitation of the P(30) transition in O3 or the P(22) transition in OCS, double-quantum vibrational energy transfer was studied in the O3-CO and O3-OCS binary gas systems. Rapid rates were observed for energy transfer from the CO (nu = 1) to the coupled O3(200), O3(101), and O3(002) levels, as well as for the transfer from the coupled O3(001) and O3(100) levels to the OCS(020) level. Deactivation of OCS by N2, Ar, and OCS was studied and deactivation rate constants were measured. The experimental results are compared with those calculated using the first order perturbation theory of dipole transition-moment interactions (Sharma and Brau, 1969) as modified by Tam (1972). An attempt is made to interpret the obtained results.

A laser fluorescence technique is used for the direct observation of the vibrational relaxation of H2 in the presence of D2 and HCl. The technique used is much simpler than the Raman absorption laser-schlieren method and has the advantage that the direct observation of changes in the vibrational energy of H2 permits the study of V-V relaxation processes in mixtures of H2 with other gases. The rapid V-V transfer between HF and H2 is used to permit the selective vibrational excitation of H2 by trace amounts of HF excited by laser absorption. The subsequent relaxation of vibrational energy from the coupled HF and H2 molecules is monitored by the laser induced fluorescence of HF.

CW chemical laser development, N2-C02 electrically excited fluid mixing laser techniques, and gas dynamic mixing behind shock waves

CW chemical lasers research, summarizing three lasing principles and advantages over electrically or thermally excited lasers

CW chemical operation in IR for hydrogen fluoride, deuterium fluoride, hydrogen fluoride- carbon dioxide and deuterium fluoride-carbon dioxide systems

Transverse flow deuterium fluoride-carbon dioxide chemical laser for CW output without external energy source

CW chemical lasers operation from partially inverted transitions of HCl, HF and DF molecules in subsonic flow

High speed flowing gas system provides uniform mixing in short times compared to flow transit times and carbon dioxide vibrational relaxation times. This system minimizes the effects of surrounding surfaces and provides a uniformly high gain that is independent of dimensions transverse to the flow direction.

Continuous wave chemical laser operation at 10.6 micron in carbon dioxide pumped by vibrational energy from hydrogen atoms and bromine molecules reaction

CW laser operation at 10.6 microns in DF-carbon dioxide and HF-carbon dioxide molecular systems achieved by purely chemical means

Chemical laser CW opertion achieved by mixing gases, obtaining pumping energy from chemical reactions

Continuous wave chemical laser operation in carbon dioxide pumped by vibrational energy released from DF and HF molecular formation

Output power and gain saturation characteristics for high speed flowing gas molecular lasers, discussing electrically excited fluid mixing carbon dioxide laser

A subsonic transverse-flow chemical laser has been instrumented to permit measurements of vibration-rotation state populations and laser output spectra under flow conditions typical of present CW hydrogen halide laser operation. Measurements are presented for the F + HI, F + HBr, F + CH4, F + HCl, F + H2, Cl + HI, and Cl + HBr atom-exchange reaction systems. CW operation was found to be characterized by relatively modest departures from Maxwell-Boltzmann vibrational energy distributions at all stages of reaction in contrast to pulsed operation based on similar reactions.