Search

We report the effect of pH on the dynamics and structure of 3D networks formed by the temperature-dependent hydrophobic association of the end blocks of P(nBuMA18-co-TEGMA15)-b-PDMAEMA159-b-P(nBuMA...

Tunable electrostatic interactions in thin films from (C-co-D)-b-B-b-A-b-B-b-(C-co-D)-type pentablock quaterpolymers featuring hydrophobic end blocks as well as pH-responsive and hydrophilic midblo...

The present study reports on the development of a simple two-step process toward the isolation of nearly defect-free mono- and few-layer graphenes in various media. This was achieved by liquid phase pre-exfoliation of pristine graphite in the presence of an ionizable PSnP2VPn heteroarm star copolymer in an organic solvent and subsequent graphene shuttle between immiscible media, that is, organic solvent/water and water/ionic liquid. This polymer-assisted phase transfer of graphene sheets gave rise to enrichment of suspended nanostructures in monolayers, especially in an aqueous environment. The exfoliation efficiency was assessed through Raman and electron microscopy. Relatively high concentration suspensions of efficiently exfoliated graphene sheets of large size and in high solubilization yield, could be prepared in any kind of solvent, that is, organic low boiling point medium, aqueous environment, or ionic liquid, whereas the shuttle transfer was found to be a reversible process between organic and aq...

Polylysine is a biocompatible, biodegradable, water soluble polypeptide. Thanks to the pendant primary amines it bears, it is susceptible to modification reactions. In this work Poly(L-lysine) (PLL) was partially modified via the effortless free-catalysed aza-Michael addition reaction at room temperature by grafting N-isopropylacrylamide (NIPAm) moieties onto the amines. The resulting PLL-g-NIPAm exhibited LCST-type thermosensitivity. The LCST can be tuned by the NIPAm content incorporated in the macromolecules. Importantly, depending on the NIPAm content, LCST is highly dependent on pH and ionic strength due to ionization capability of the remaining free lysine residues. PLL-g-NIPAm constitutes a novel biodegradable LCST polymer that could be used as “smart” block in block copolymers and/or terpolymers, of any macromolecular architecture, to design pH/Temperature-responsive self-assemblies (nanocarriers and/or networks) for potential bio-applications.

Sodium alginate grafted by a thermo-responsive copolymer of N-isopropylacrylamide, enriched with the hydrophobic N-tert-butylacrylamide monomer, (P(NIPAM-co-NtBAM)-NH2) was synthesized and its thermo- and shear-induced responsive capabilities were studied through rheology. The graft copolymer formed a 3D network through thermo-induced hydrophobic association of the thermo-responsive P(NIPAM-co-NtBAM) side chains in water. By applying the frequency-temperature superposition principle, the terminal relaxation time, τ and the shear viscosity, as a function of temperature were evaluated. Both parameters increased exponentially upon heating orders of magnitude, 15 °C above the onset of gelation (35 °C). It is shown that the thermo-induced thickening effect was mainly due to the slowdown of the P(NIPAM90-co-NtBAM10) associative side chains exchange dynamics. Moreover, combination of shear- and thermo-responsiveness provided excellent hydrogel injectability with instantaneous gelation at physiological temperature. The better insight of the thermo-thickening mechanism through oscillatory rheology allows precise tuning of the carbohydrate-based hydrogel properties towards potential bioapplications.

We report the preparation of mesoporous silica nanoparticles covered by layer by layer (LbL) oppositely charged weak polyelectrolytes, comprising poly(allylamine hydrochloride) (PAH) and a sodium alginate, highly grafted by N-isopropylacrylamide/N-tert-butylacrylamide random copolymers, NaALG-g-P(NIPAM90-co-NtBAM10) (NaALG-g). Thanks to the pH dependence of the degree of ionization of the polyelectrolytes and the LCST-type thermosensitivity of the grafting chains of the NaALG-g, the as-prepared hybrid nanoparticles (hNP) exhibit pH/thermo-responsive drug delivery capabilities. The release kinetics of rhodamine B (RB, model drug) can be controlled by the number of PAH/NaALG-g bilayers and more importantly by the environmental conditions, namely, pH and temperature. As observed, the increase of pH and/or temperature accelerates the RB release under sink conditions. The same NaALG-g was used as gelator to fabricate a hNP@NaALG-g hydrogel composite. This formulation forms a viscous solution at room temperature, and it is transformed to a self-assembling hydrogel (sol-gel transition) upon heating at physiological temperature provided that its Tgel was regulated at 30.7 °C, by the NtBAM hydrophobic monomer incorporation in the side chains. It exhibits excellent injectability thanks to its combined thermo- and shear-responsiveness. The hNP@NaALG-g hydrogel composite, encapsulating hNP covered with one bilayer, exhibited pH-responsive sustainable drug delivery. The presented highly tunable drug delivery system (DDS) (hNP and/or composite hydrogel) might be useful for biomedical potential applications.

Graft copolymers of alginate backbone and N-isopropylacrylamide/N-tert-butylacrylamide random copolymer, P(NIPAMx-co-NtBAMy), side chains (stickers) with various NtBAM content were designed and explored in aqueous media. Self-assembling thermoresponsive hydrogels are formed upon heating, in all cases, through the hydrophobic association of the P(NIPAMx-co-NtBAMy) sticky pendant chains. The rheological properties of the formulations depend remarkably on the NtBAM hydrophobic content, which regulates the lower critical solution temperature (LCST) and, in turn, the stickers’ thermo-responsiveness. The gelation point, Tgel, was shifted to lower temperatures from 38 to 20 °C by enriching the PNIPAM chains with 20 mol % NtBAM, shifting accordingly to the gelation temperature window. The consequences of the Tgel shift to the hydrogels’ rheological properties are significant at room and body temperature. For instance, at 37 °C, the storage modulus increases about two orders of magnitude and the terminal relaxation time increase about 10 orders of magnitude by enriching the stickers with 20 mol % hydrophobic moieties. Two main thermo-induced behaviors were revealed, characterized by a sol–gel and a weak gel–stiff gel transition for the copolymer with stickers of low (0.6 mol %) and high (14, 20 mol %) NtBAM content, respectively. The first type of hydrogels is easily injectable, while for the second one, the injectability is provided by shear-thinning effects. The influence of the type of media (phosphate buffer (PB), phosphate-buffered saline (PBS), Dulbecco’s modified Eagle’s medium (DMEM)) on the hydrogel properties was also explored and discussed. The 4 wt % NaALG-g-P(NIPAM80-co-NtBAM20)/DMEM formulation showed excellent shear-induced injectability at room temperature and instantaneous thermo-induced gel stiffening at body temperature, rendering it a good candidate for cell transplantation potential applications.

A triblock copolymer with hydrophobic end blocks and a polyampholytic middle block is investigated in a mixture of water and acetone with a focus on the dependence of the rheological properties and of the micellar structure and correlation on the content of acetone. The polymer under study is PMMA86-b-P(DEA190-co-MAA96)-b-PMMA86, where PMMA stands for poly(methyl methacrylate) and P(DEA-co-MAA) for poly(2-(diethylamino) ethyl methacrylate-co-methacrylic acid). The pH is chosen at 3. Rheological measurements reveal a transition from a viscoelastic solid over a viscoelastic liquid to a freely flowing liquid upon addition of 5 or 10 wt% of acetone to a 3 wt% aqueous polymer solution, respectively. Using small-angle neutron scattering on 0.5 wt% polymer solutions in water/acetone with the content of the latter ranging between 0 and 30 wt%, significant structural changes are observed as well, such as a decrease of the distance between the PMMA cross-links and of the size of the network clusters upon increasing acetone constant. These changes are attributed to the reduction of the dielectric constant by the addition of the cosolvent acetone, enhancing the flexibility of the middle blocks and their tendency to backfolding, as well as to the decrease of the solvent selectivity, inducing significant exchange rate enhancement of the core-forming PMMA blocks.

Advanced functional materials 31(32), 2102905 (2021). doi:10.1002/adfm.202102905, Multiblock copolymers with charged blocks are complex systems that show great potential for enhancing the structural control of block copolymers. A pentablock terpolymer PMMA-b-PDMAEMA-b-P2VP-b-PDMAEMA-b-PMMA is investigated. It contains two types of midblocks, which are weak cationic polyelectrolytes, namely poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(2-vinylpyridine) (P2VP). Furthermore, these are end-capped with short hydrophobic poly(methyl methacrylate) (PMMA) blocks in dilute aqueous solution and thin films. The self-assembly behavior depends on the degrees of ionization �� of the P2VP and PDMAEMA blocks, which are altered in a wide range by varying the pH value. High degrees of ionization of both blocks prevent structure formation, whereas microphase-separated nanostructures form for a partially charged and uncharged state. While in solutions, the nanostructure formation is governed by the dependence of the P2VP block solubility of the and the flexibility of the PDMAEMA blocks on ��, in thin films, the dependence of the segregation strength on �� is key. Furthermore, the solution state plays a crucial role in the film formation during spin-coating. Overall, both the mixing behavior of the 3 types of blocks and the block sequence, governing the bridging behavior, result in strong variations of the nanostructures and their repeat distances., Published by Wiley-VCH, Weinheim

Crosslinking of polyethylene oxide (PEO) using a peroxide in the melt is employed to synthesize soft hydrogels with the ability of controlled release of proteins. The viscoelastic properties of the swollen networks confirm the elastic nature of the synthesized material and they are in agreement with swelling characteristics. The hydrogels have mesh sizes at the nm scale as it is estimated by swelling measurements and measured by small angle neutron scattering (SANS). Diffusion of bovine serum albumin (BSA) and lysozyme (LYZ) out of the hydrogels is restricted by the presence of the network. The diffusion coefficient in the hydrogels is lower for BSA in comparison to LYZ, while in both cases it drops as the mesh size of the network becomes smaller. This study introduces the use of peroxide-crosslinked PEO networks in the investigation of protein transport within hydrogels, the development of hydrogel-based protein delivery patches and polymeric constructs.

This work is focused on the design and development of biocompatible self-assembling hydrogels which behave as soft gels at room temperature and as strong ones at the physiological temperature, suitable for potential bio-applications. A graft copolymer of sodium-alginate bearing 8 side chains of poly(N-isopropylacrylamide), enriched with the hydrophobic comonomer N-tertiary-butyl-acrylamide (NtBAM), [ALG-g-P(NIPAM-co-NtBAM)] were used as gelator. 5 wt % aqueous polymer solutions in the presence of various concentrations of Ca2+ cations were prepared and evaluated as thermoresponsive hydrogels. Rheological experiments revealed a twostep reversible gelation either upon heating or upon cooling . The divalent cations operate as cross-linking agent through ionic interactions inducing the formation of a network at low temperatures. Upon heating, an additional crosslinking develops through thermo-generated hydrophobic association of the thermo-responsive P(NIPAM-co-NtBAM) side chains above a critical temperature. The storage modulus, G’, increases with the cation concentration below and above the critical temperature. More importantly, the difference of G’ between 20 oC and 50 oC (ΔG’) increases linearly with the cation concentration, revealing a cooperative effect between the two-association mechanism, i.e. ionic and hydrophobic. In other words, the thermo-induced hydrogel elasticity is enhanced in the presence of the ionic bonds. Furthermore, the combination of thermo- and shear-responsiveness provides shelf-assembling systems as potential candidates for injectable strategies. Especially, the systems with lower cation concentration could be used for drug delivery, while the gelators with higher cation concentration could be used for cell transplantation, which require a weak gel to protect the cells during injection and an instantaneous gelation at physiological temperature after the injection to immobilize the created scaffold in the targeting position of the host tissue.

Steady shear properties and linear and nonlinear viscoelastic behaviors of a poly(methyl methacrylate)–poly(dimethyl amino ethyl methacrylate)–poly(methyl methacrylate) polymer, (PMMA–PDMAEMA–PMMA), telechelic polymers in salt-free aqueous solution have been investigated as a function of concentration and pH. Above a critical concentration, a transient physical network is formed through an association mechanism between hydrophobic end groups, leading to a gel-like behavior. The gel-like polymer solutions were shown to exhibit a peculiar flow behavior, associated with time fluctuation of the transient first normal stress difference, attributed to orientation effects of the stiff charged polymer chains. The viscoelastic behavior was shown to be governed by two pH dependent time scales: a short time scale controlled by the lifetime of the hydrophobic associative junctions and a long time scale corresponding to the network relaxation time. All rheological results show strong evidence that Coulomb interactions, which control both macromolecular chain rigidity and inter-chain interactions, lead to specific pH-tunable properties of great potential interest.

In the present study, a soil-derived mixed microbial consortium was developed for polyhydroxyalkanoates (PHAs) production via nutrient limitation. The enhanced consortium was then cultured continuously in sequential batch and the effect of different nitrogen to carbon ratios (N:C) on the yields and properties of produced PHAs and on the changes of the microbial population were investigated. In all cases, the produced polymers were identified as blends or co-polymers of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) units, with 3HB being the dominant monomer. The degradation profile and the transition temperatures of the produced PHAs were further assessed and compared, as well as the molecular weights which ranged from 77.104 Da to 180.104 Da. In order to further investigate the effect of culturing conditions on the development and alteration of the microbial consortium, the Nile blue live staining was applied in the mixed cultures at the end of each operational period. Various fluorescent single colonies were selected based on differences in their morphology and were identified. Finally, the alterations in microbial diversity and community composition assessed via the RISA profiling method (rRNA Intergenic Spacer Analyses), resulted in the identification of a number of dominant organisms.

Heteroarm star-graft block quarterpolymers [PSn(P2VP-b-PAA-g-PNIPAM)n] with pH-sensitive weak polycationic/polyanionic arms and grafted thermoresponsive outer chains are integrated into hydrogen-bonded multilayers with morphologies distinct from those in traditional layer-by-layer assemblies. We discovered that block-specific swelling promotes heterogeneous partitioning of hydrophobic and hydrophilic reservoirs within the interior of the swollen multilayers. The molecular architecture and amphiphilicity balance governs the internal structure and is regulated via solution pH and temperature. In acidic/basic regimes, competing interactions between hydrophobic and ionized blocks favor compartmentalization of water to the hydrophilic pockets near the substrate surface. Heating the assemblies of star block quarterpolymers with high grafting densities above the lower critical solution temperature of the PNIPAM peripheries promotes the aggregation of the functional “soft nanoparticles” into star-like clusters wh...

The accumulation efficiency and the properties of polyhydroxyalkanoates (PHAs) produced from acidified waste glycerol (AWG) and its derivatives via an enriched microbial consortium derived from soil, were investigated in this study. AWG consisted mainly from short chain fatty acids, 1,3 propanediol and residual glycerol, which were also evaluated individually as substrates. Accumulation capacity and yields were estimated after solvent extraction and purification and PHAs were further analyzed in terms of their chemical structure, thermal properties, molecular masses and mechanical properties. The lowest accumulation capacity was noticed for non-acidified waste glycerol as carbon source which led to the generation of P(3HB), whereas for the other carbon sources co-polymers of 3HB with 3HV or 3HHx were produced. Average molecular mass weights were quite high in all cases reaching ~1.8 × 106 Da. The thermal properties and the mechanical behavior of PHAs were shown to be highly affected by their monomeric composition, whereas it was also concluded that DSC and DMA results were in good agreement.

Poly(2-vinyl pyridine)-b-poly(ethylene oxide) (P2VP-b-PEO) linear diblock copolymer and polystyrene&ndash, poly(ethylene oxide) (PS10PEO10) heteroarm star copolymer were used as building elements to prepare organic&ndash, inorganic hybrids. By using the layer-by-layer (LbL) methodology, these elements were integrated on mesoporous silica through non-covalent interactions, namely, ionic and H-bonding. For the latter, tannic acid (TA) was used as an intermediate layer. The deposition of the various layers was monitored by thermogravimetric analysis (TGA), electrophoretic measurements, and confocal microscopy. The final silica hybrid, bearing alternating P2VP-b-PEO and PS10PEO10 star layers was capable of carrying one hydrophilic and two hydrophobic chemical species in distinct compartments. These multicompartmental organic&ndash, inorganic hybrids could be used as nanostructured carriers for pH-responsive multiple drug delivery and potential theranostic applications.

We explore the self-assembly behavior of aqueous solutions of an amphiphilic, pH-sensitive poly(l-alanine)-b-poly(l-glutamic acid)-b-poly(l-alanine), (A5E11A5) triblock copolypeptide, end-capped by benzaldehyde through Schiff base reaction. At elevated concentrations and under physiological pH (7.4) and ionic strength (0.15M), the bare copolypeptide aqueous solutions underwent a sol-gel transition after heating and slow cooling thermal treatment, forming opaque stiff gels due to a hierarchical self-assembly that led to the formation of β-sheet-based twisted super fibers (Popescu et al. Soft Matter 2015, 11, 331-342). The conjugation of the N-termini with benzaldehyde (Bz) through a Schiff base reaction amplifies the copolypeptide pH-sensitivity within a narrow pH window relevant for in vivo applications. Specifically, the dynamic character of the imine bond allowed coupling/decoupling of the Bz upon switching pH. The presence of Bz conjugates to the N-termini of the copolypeptide resulted in enhanced packing of the elementary superfibers into thick and short piles, which inhibited the ability of the system for gelation. However, partial cleavage of Bz upon lowering pH to 6.5 prompted recovery of the hydrogel. The sol-gel transition triggered by pH was reversible, due to the coupling/decoupling of the benzoic-imine dynamic covalent bonding, endowing thus the gelling system with injectability. Undesirably, the gelation temperature window was significantly reduced, which however can be regulated at physiological temperatures by using a suitable mixture of the bare and the Bz-conjugated coplypeptide. This triblock copolypeptide gelator was investigated as a scaffold for the encapsulation of polymersome nanocarriers, loaded with a hydrophilic model drug, calcein. The polymersome/polypeptide complex system showed prolonged probe release in pH 6.5, which is relevant to extracellular tumor environment, rendering the system potentially useful for sustained delivery of anticancer drugs locally in the tumor.

Multicompartmental responsive microstructures with the capability for the pre-programmed sequential release of multiple target molecules of opposite solubility (hydrophobic and hydrophilic) in a controlled manner have been fabricated. Star block copolymers with dual-responsive blocks (temperature for poly(N-isopropylacrylamide) chains and pH for poly(acrylic acid) and poly(2-vinylpyridine) arms) and unimolecular micellar structures serve as nanocarriers for hydrophobic molecules in the microcapsule shell. The interior of the microcapsule can be loaded with water-soluble hydrophilic macromolecules. For these dual-loaded microcapsules, a programmable and sequential release of hydrophobic and hydrophilic molecules from the shell and core, respectively, can be triggered independently by temperature and pH variations. These stimuli affect the hydrophobicity and chain conformation of the star block copolymers to initiate out-of-shell release (elevated temperature), or change the overall star conformation and interlayer interactions to trigger increased permeability of the shell and out-of-core release (pH). Reversing stimulus order completely alters the release process.

Thermoresponsive polymers constitute an important class of materials for biomedical application due to their thermally reversible coil-to-globule transition which can be exploited in a multitude of biomedical applications spanning from triggered drug delivery systems in the form of bulk hydrogels and nanoparticles, “smart” cell culture setups, sensors and actuators, and separation technologies. In this perspective article we present the basic physicochemical properties of poly (N-isopropylacrylamide) (PNIPAM), which is the most widely studied thermoresponsive polymer with a lower critical solution temperature. We describe the basic thermodynamic and physicochemical parameters that affect the LCST and present selective applications that utilize thermoresponsive polymers in the form of nano-assemblies including micelles, polymersomes, microcapsules and microgels, as well as injectable hydrogels for biomedical applications.

3-Arm PMMAs end-functionalized by pyrene were designed as dispersing/stabilizing agents for the liquid-phase exfoliation of graphite in low-boiling point solvents like chloroform. The synthetic procedure comprised ARGET ATRP controlled polymerization, click chemistry and the quaternization reaction of triazole, ensuring tailor-made, well-defined pyrene-functional star PMMAs. Among a series of different pyrene-functional macromolecular topologies, the (PMMA-py2)3 proved the most efficient exfoliation agent giving relatively high graphene concentration (0.36 mg ml-1) at exceptionally low polymer/graphite mass ratio (mP/mGF = 0.003) and short sonication time (3 h). A 5-cycle iterative procedure relying on the redispersion of the sediment was developed yielding CG = 1.29 mg ml-1 with 14.8% exfoliation yield, under the favorable conditions of 10.5 h total shear mixing/tip sonication time and overall mP/mGF ratio as low as 0.15. In parallel, all-atom molecular dynamics simulations were conducted which helped understand the mechanism by which pyrene-functional macromolecular topologies act as efficient dispersing agents of graphene. Finally the G@(PMMA-Py)3 hybrids were well dispersed into the PMMA matrix by electrospinning to fabricate graphene-based nanocomposite fibrous veils. These graphene/polymer nanocomposites exhibited enhanced stiffness and strength by a factor of 4.4 with 1.5 wt% graphene hybrids as nanofillers.

We report the fabrication of polymersomes, using as building blocks star-graft quarterpolymers, composed of hydrophobic polystyrene and pH-sensitive poly(2-vinylpyridine)-b-poly(acrylic acid) (P2VP-b-PAA) arms, emanated from a common nodule, enriched by thermosensitive poly(N-isopropylacrylamide) grafts covalently bonded on the PAA block-arms. These multicompartmental polymersomes were evaluated as nanocarriers for the encapsulation and controlled co-delivery of doxorubicin (hydrophilic) and paclitaxel (hydrophobic) chemotherapeutic agents. The polymersomes can load these drugs in different compartments and can efficiently be internalized in the human lung adenocarcinoma epithelial cells, delivering their cargo and inducing high cell apoptosis. The release kinetics of both anticancer agents was controlled differently by the environmental conditions (pH and temperature). Enhanced release was observed at the acidic pH 6.0 and under physiological temperature (37 °C). At the same total drug level, co-delivery of these drugs with the polymersomes caused enhanced cytotoxicity and induced significantly higher cell apoptosis in the cancer cell line compared to the polymersomes loaded with either of the two drugs.

Pyrene-functional PMMAs were prepared via ATRP-controlled polymerization and click reaction, as efficient dispersing agents for the exfoliation of few-layered graphene sheets (GS) in easily processable low boiling point chloroform. In parallel, detailed atomistic simulations showed fine dispersion of the GS/polymer hybrids in good agreement with the experiment. Moreover, the molecular dynamics simulations revealed interesting conformations (bridges, loops, dangling ends, free chains) of GS/polymer hybrids and allowed us to monitor their time evolution both in solution and in the polymer nanocomposite where the solvent molecules were replaced with PMMA chains. Microscopic information about these structures is very important for optimizing mechanical performance. It seems that the combination of atomistic simulation with advanced chemistry constitutes a powerful tool for the design of effective graphene dispersing agents that could be used for the production of graphene-based nanocomposites with tailor-made mechanical properties.

We report the synthesis and characterization of a C-b-(A-co-B)-b-C triblock terpolymer gelator, named telechelic polyampholyte, bearing a P(DEAEMA-co-MAA) statistical polyampholyte as the central long block, end-capped at both ends by PMMA blocks. This associative polymer forms 3D networks in aqueous media, composed of PMMA hydrophobic nanodomains, bridged by the hydrophilic P(DEA-co-MAA) ionogenic blocks. Thanks to the weak acid/base nature of the oppositely charged ionic moieties, the ionization degree of which are controlled by pH, the formed hydrogels exhibit unique pH-responsive behavior. The network structure and in turn the hydrogel rheological properties strongly depend on the preparation conditions, i.e. swelling film or direct dissolution in aqueous media.

We investigate the influence of ionic strength on the structural properties of stimuli-responsive hydrogels from triblock polyampholytes PAA-b-P2VP-b-PAA (PAA and P2VP are negatively charged poly(acrylic acid) and positively charged poly(2-vinylpyridine)). In our previous studies, we found that the transition behavior depends on the charge asymmetry which is controlled by pH and which alters the degree of ionization of the two types of blocks [Dyakonova Macromolecules 2014, 47, 7561]. The same triblock polyampholyte, but with chemically quaternized P2VP (QP2VP) instead of P2VP as the middle block, is highly positively charged, independently of pH. In the present investigation, PAA-b-P2VP-b-PAA at pH 3 and PAA-b-PQ2VP-b-PAA at pH 5 were chosen to investigate the influence of the ionic strength on the micellar network morphology by adding NaCl at concentrations in the physiological range. Computer simulations of the latter system show that salt addition results in the formation of larger complexes due to in...

Multifunctional star-graft quarterpolymers PSn[P2VP-b-(PAA-g-PNIPAM)]n with two different arm types, shorter PS arms and longer P2VP-b-PAA block copolymer arms with grafted PNIPAM chains, were studied in terms of their ability to form micellar structures at the air/water and air/solid interfaces. Because of the pH-dependent ionization of P2VP and PAA blocks, as well as thermoresponsiveness of PNIPAM chains, these multifunctional stars have multiple responsive properties to pH, temperature, and ionic strength. We observed that the molecular surface area of the stars is the largest at basic pH, when the PAA blocks are strongly charged and extended, and PNIPAM chains are spread at the interface. At acidic conditions, the molecular surface area is the smallest because the P2VP blocks submerge into the water subphase and the PAA blocks are contracted and form hydrogen bonding with grafted PNIPAM chains. The molecular surface area of the stars at the air/water interface gradually increases at elevated temperatu...

Hydrogels are three-dimensional (3D) soft materials that consist of a solid matrix (usually a three-dimensional network) entrapping high content of water (more than 90 wt%). This remarkable feature makes them suitable for many applications especially in medicine as drug carriers and tissue engineering scaffolds. As far as polymeric matrices are concerned, two main strategies for achieving 3D network structures can be distinguished. The first one relies on the covalent bonding of hydrophilic polymer chains, leading to hydrogels referred as chemical networks. The second approach deals with the self-assembly of tailor-made segmented macromolecules via reversible weak interactions, namely hydrophobic, ionic, π–π staking, and so on, that leads to the so-called self-assembling hydrogels. The use of reversible (physical) cross-links allows the design of “smart” soft materials that can response to their environment (e.g., pH, ionic strength, temperature, shear). This chapter is devoted to the self-assembling hydrogels arising from associative block copolymers bearing ionic or ionogenic blocks, namely polyelectrolytes or polyampholytes. This specific feature endows the hydrogels with responsiveness to pH and ionic strength which make them attractive soft materials for potential biomedical applications.

In this work, linear polystyrene-poly(2-vinylpyridine) (PS-b-P2VP) and heteroarm star PS_22P2VP_22 ionizable block copolymers were used as dispersing agents for the liquid-phase exfoliation of pristine graphene. Various strategies such as direct exfoliation, film hydration and phase transfer have been employed and compared. The best strategy involved a two-step process, namely, pre-exfoliation of graphite in polymer/CHCl3 solutions followed by phase transfer to acidified water. High concentrations of stable aqueous suspensions of graphene flakes, highly enriched in monolayer structures, were then obtained by using the star-shaped copolymers as stabilizers. The as-prepared graphene/copolymer hybrids were used as a filler material in order to prepare functional polymer composites for mechanical reinforcement. Such copolymer-modified graphene sheets have proven to be efficient reinforcing agents of PVA, as a significant increase of storage modulus (145% higher than that of neat PVA) was achieved even at a low graphene weight fraction of 0.1 wt%.

We report the rheological and structural properties of a suspension comprising poly(ethylene oxide)-polystyrene-poly(ethylene oxide) core-shell micellar nanoparticles dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid. A liquid to soft solid transition was observed at a copolymer concentration of 10 wt % above which an elastic soft material was formed, which was composed of non-ordered jammed core-shell micellar nanoparticles. In the soft solid state, a significant reduction in the size of the nanoparticles, approaching hard sphere behavior, was observed by small-angle X-ray scattering which is attributed to compression of the soft poly(ethylene oxide) coronas. The nonvolatile ionic liquid-based glassy soft solid formed exhibited remarkable thermal stability with a melting temperature of 141 °C at 20 wt % copolymer, which renders it suitable for applications involving elevated temperatures and/or reduced pressure where water-based formulations are inappropriate.

In this work, the self-assembly behavior and pH responsiveness of a triblock copolypeptide in aqueous media are demonstrated. The copolypeptide was composed of a central pH responsive poly(l-glutamic acid) (PGA), flanked by two hydrophobic poly(l-alanine) blocks (PAla) (PAla5-PGA11-PAla5). This system showed a pH-responsive transition from short tapes to spherical aggregates by increasing the pH, as a result of deprotonation of the PGA block and a conformational change from α-helix to random coil. Increasing the ionic strength to physiological conditions (0.15 M) has triggered fibrillar self-assembly through intermolecular hydrogen bonding of PAla end-blocks that form β-sheet nanostructures, in conjunction with charge screening of the central random coil PGA segments. At elevated concentrations a thermo-responsive free supporting hydrogel was obtained, consisting of rigid β-sheet based twisted superfibers, resulting from hierarchical self-assembly of the copolypeptide. Yet, morphological transformation of this nanostructure was observed upon switching the pH from physiological conditions to pH 4. An unexpected morphology constituted of α-helix-based giant nanobelts was observed as a consequence of the secondary peptide transitions.

We investigate the influence of pH on the rheological and structural properties of hydrogels formed by hydrophobic association of the sticky ends of the triblock terpolymer poly(methyl methacrylate)-b-poly(2-(diethylamino)ethyl methacrylate-co-methacrylic acid)-b-poly(methyl methacrylate) (PMMA-b-P(DEA-co-MAA)-b-PMMA). The middle block is a weak polyampholyte having a pH dependent charge density and sign, which enables tuning of the rheological and structural properties by pH variation. Small-angle neutron scattering (SANS) studies of solutions in D2O at 0.05 wt% and pH 3.0 reveal clusters of interconnected spherical micelles having PMMA cores, stabilized by repulsive ionic interactions in the middle polyampholyte block. With increasing pH, the degree of ionization of the DEA units decreases, whereas the one of the MAA units increases, resulting in a complete loss of the correlation between these micelles. At a concentration of 3 wt% at low pH values, the system forms a gel with charged fuzzy spheres from PMMA interacting via a screened Coulomb potential. With increasing pH, the gel disintegrates due to the decrease in the effective charge on the micelles. At both concentrations, the hydrophobic aggregation of micelles is observed near the isoelectric point. At pH 3.0–7.4, the autocorrelation functions measured by rotational dynamic light scattering at 3 wt% exhibit a decay steeper than single exponential, which confirms that the gels are frozen, presumably due to the glassy PMMA cores and hydrophobic interpolyelectrolyte complexes. At pH 11, the diffusion of single micelles is observed in addition to the frozen dynamics.

We investigate the conformational properties of stimuli-responsive hydrogels from triblock polyelectrolytes PtBA-b-P2VP-b-PtBA (PtBA and P2VP are poly(tert-butyl acrylate) and poly(2-vinylpyridine)) and the corresponding polyampholytes PAA-b-P2VP-b-PAA (PAA is poly(acrylic acid)), the latter with nonquaternized or quaternized P2VP blocks. The block lengths are the same in all three polymers with relatively short end blocks and long middle blocks. The mechanical properties of the hydrogels have previously been found to depend strongly on the pH value and on the nature of the blocks (Polymer 2008, 49, 1249). Here, we present results from rheological studies and small-angle neutron scattering revealing the underlying hydrogel structures. The hydrogel structure of the polyampholyte depends on the charge asymmetry, controlled by the pH value, and reveals several transitions with increasing charge ratio. A low charge asymmetry causes the collapse of the chains into large globular structures due to the fluctuati...

The self-assembly of an amphiphilic pentablock terpolymer, consisting of a pH-sensitive poly(2-vinylpyridine) (P2VP) central block, bearing at both ends hydrophilic poly(ethylene oxide) (PEO) end-capped with hydrophobic poly(e-caprolactone) (PCL) blocks was investigated in aqueous media. When the polymer was transferred to aqueous medium through solvent exchange technique, micellar assemblies were obtained, with a morphological switch from “flower-like” crew-cut micelles to large compound vesicles upon partial quaternization of 2VP block. More importantly, well-defined polymer vesicles were formed when thin film hydration method was employed. Such polymersomes presented “flower-like” morphology, with a membrane composed of self-assembled P2VP hydrophobic central blocks shielded by PCL hydrophobic ends and surrounded by PEO looping chains at the inner and outer surfaces. The potential of the pentablock vesicles as drug delivery carriers was explored by encapsulation of calcein, a model hydrophilic drug, in the polymersomes and monitoring its release at different pH values simulating physiological environments. It is shown that the release profile of the nanoparticle formulations could be modulated by tuning the membrane permeability either through chemical (i.e. partial quaternization) and/or physical (i.e. pH variations) pathways.

We report the interfacial assembly of amphiphilic heteroarm star copolymers (PSnP2VPn and PSn(P2VP-b-PtBA)n (n = 28 arms)) on graphene oxide flakes at the air-water interface. Adsorption, spreading, and ordering of star polymer micelles on the surface of the basal plane and edge of monolayer graphene oxide sheets were investigated on a Langmuir trough. This interface-mediated assembly resulted in micelle-decorated graphene oxide sheets with uniform spacing and organized morphology. We found that the surface activity of solvated graphene oxide sheets enables star polymer surfactants to subsequently adsorb on the presuspended graphene oxide sheets, thereby producing a bilayer complex. The positively charged heterocyclic pyridine-containing star polymers exhibited strong affinity onto the basal plane and edge of graphene oxide, leading to a well-organized and long-range ordered discrete micelle assembly. The preferred binding can be related to the increased conformational entropy due to the reduction of interarm repulsion. The extent of coverage was tuned by controlling assembly parameters such as concentration and solvent polarity. The polymer micelles on the basal plane remained incompressible under lateral compression in contrast to ones on the water surface due to strongly repulsive confined arms on the polar surface of graphene oxide and a preventive barrier in the form of the sheet edges. The densely packed biphasic tile-like morphology was evident, suggesting the high interfacial stability and mechanically stiff nature of graphene oxide sheets decorated with star polymer micelles. This noncovalent assembly represents a facile route for the control and fabrication of graphene oxide-inclusive ultrathin hybrid films applicable for layered nanocomposites.

We present the layer-by-layer (LbL) assembly of amphiphilic heteroarm pH-sensitive star-shaped polystyrene-poly(2- pyridine) (PSnP2VPn) block copolymers to fabricate porous and multicompartmental microcapsules. Pyridine-containing star molecules forming a hydrophobic core/hydrophilic corona unimolecular micelle in acidic solution (pH 3) were alternately deposited with oppositely charged linear sulfonated polystyrene (PSS), yielding microcapsules with LbL shells containing hydrophobic micelles. The surface morphology and internal nanopore structure of the hollow microcapsules were comparatively investigated for shells formed from star polymers with a different numbers of arms (9 versus 22) and varied shell thickness (5, 8, and 11 bilayers). The successful integration of star unimers into the LbL shells was demonstrated by probing their buildup, surface segregation behavior, and porosity. The larger arm star copolymer (22 arms) with stretched conformation showed a higher increment in shell thickness due to the effective ionic complexation whereas a compact, uniform grainy morphology was observed regardless of the number of deposition cycles and arm numbers. Small-angle neutron scattering (SANS) revealed that microcapsules with hydrophobic domains showed different fractal properties depending upon the number of bilayers with a surface fractal morphology observed for the thinnest shells and a mass fractal morphology for the completed shells formed with the larger number of bilayers. Moreover, SANS provides support for the presence of relatively large pores (about 25 nm across) for the thinnest shells as suggested from permeability experiments. The formation of robust microcapsules with nanoporous shells composed of a hydrophilic polyelectrolyte with a densely packed hydrophobic core based on star amphiphiles represents an intriguing and novel case of compartmentalized microcapsules with an ability to simultaneously store different hydrophilic, charged, and hydrophobic components within shells.

We report the pH-controlled surface behavior of amphiphilic PS n (P2VP- b -PAA) n heteroarm star block terpolymers, ( n = number of arms, 9 and 22), bearing amphoteric diblock arms with varying polyvalent ionic charges (i.e. negative, positive, and zwitterionic) at the air–water and air–solid interfaces. We investigated the assembly of these pH-sensitive star terpolymers in Langmuir and Langmuir–Blodgett monolayers under different pH conditions of the subphase. The π-A isotherms acquired at variable pH conditions revealed a distinct aggregation behavior of surface micelles which is dependent on the ionization of the polyelectrolyte blocks and the number of arms. The star block copolymer with a small number of arms ( n = 9) was found to exhibit a strong pH-dependent phase transformation under compression. The pH responsive (zwitterionic) behavior results in changes in surface morphologies from circular micelles to complex labyrinth structures. In contrast, star polymers with a larger number of arms (22) and a crowded branched architecture show stable circular domain morphology without the internal reorganization under variable conditions. The observed variety of surface behaviors is attributed to the fine balance of intra molecular interactions caused by the highly branched chain architecture composed of both acidic and basic blocks. This study proposes a novel strategy for pH induced tunable surface assembly of responsive ultrathin films with multicompartments. We indeed demonstrated that the enhanced responsiveness of star polymers to wide pH range and their diverse morphology at the interface is enabled by coupling amphoteric concept and tailored molecular architecture.

We present a unique multisegmented, heteroarm star block terpolymer that can be used as an effective dispersing agent for multiwalled carbon nanotubes in aqueous media. The (polystyrene)22(poly(2-vinylpyridine)-b-poly(acrylic acid))22, PS22(P2VP-b-PAA)22, star terpolymer exhibits a pH responsive self-assembly behavior in aqueous solution, due to the ampholytic nature of its diblock copolymer arms. Depending on the pH of the medium, two different self-assemblies were observed. At a low pH (pH 2), core–shell unimolecular micelles, with a hydrophobic PS core and P2VP, PAA segments in the shell, as well as multicore large compound micelles were formed. At pH 8.5, the star was transformed from a bis-hydrophilic into a bis-hydrophobic state, leading to a network-like intermicellar assembly. This star terpolymer was capable of dispersing MWCNTs, through non-covalent interactions, thus leading to stable MWCNT–star nanohybrids in water. More importantly, the resulted MWCNT–star nanohybrids adopted the “smart” pH responsive properties of the physisorbed stars, i.e. the nanohybrids can be positively or negatively charged at low and high pH respectively, while at an intermediate pH window, phase separation occurs due to neutralization of the oppositely charged segments.

Star shaped segmented macromolecules constitute an interesting class of polymeric materials whose properties differ remarkably from those appearing in their linear counterparts. This review highlights the work done in the last decade, dealing with the self-assembly of star-shaped block copolymers and terpolymers of various topologies in aqueous media. This article focuses on a specific class of star shaped macromolecules designated as stimuli responsive. These stars bearblock/arms undergo sharp phase transitions upon responding to stimuli, such as temperature, pH, ionic strength and so forth. These transitions impose dramatic transformations on the morphology and, accordingly, in the functionality of the nanostructured associates. The number of arms, the specific functionality and topology of the different arm/blocks and the overall macromolecular architecture of the star polymer, significantly influence their behavior in terms of self-assembly and responsiveness.

We report on the growth of gold nanoparticles in polystyrene/poly(2-vinyl pyridine) (PS/P2VP) star-shaped block copolymer monolayers. These amphiphilic PS(n)P2VP(n) heteroarm star copolymers differ in molecular weight (149,000 and 529,000 Da) and the number of arms (9 and 28). Langmuir-Blodgett (LB) deposition was utilized to control the spatial arrangement of P2VP arms and their ability to reduce gold nanoparticles. The PS(n)P2VP(n) monolayer acted as a template for gold nanoparticle growth because of the monolayer's high micellar stability at the liquid-solid interface, uniform domain morphology, and ability to adsorb Au ions from the water subphase. UV-vis spectra and AFM and TEM images confirmed the formation of individual gold nanoparticles with an average size of 6 ± 1 nm in the P2VP-rich outer phase. This facile strategy is critical to the formation of ultrathin polymer-gold nanocomposite layers over large surface areas with confined, one-sided positioning of gold nanoparticles in an outer P2VP phase at polymer-silicon interfaces.

This article is dealing with the design of novel segmented polymers comprising homopolymer and random copolymer building blocks designated as block-random. This type of polymeric materials can be prepared through macromolecular engineering by using controlled polymerization methods. By replacing a homopolymer block with a random one, in block copolymer topologies, further tuning of the copolymer properties can be achieved. The present article highlights the recent developments on block-random segmented macromolecules, bearing building blocks of tunable properties (e.g. thermo-sensitivity (LCST), hydrophobicity) and exhibiting responsive behavior in aqueous environments. Furthermore, preliminary novel results regarding pH-sensitive segmented macromolecules of various topologies, bearing random polyampholyte blocks among others, are also demonstrated and discussed.