Search

Twenty-one cases of boundary-layer (BL) structure were retrieved by three co-located remote sensors, one lidar (Leosphere ALS300) and two ceilometers (Vaisala CL31, Jenoptik CHM15K). Data were collected during the ICOS field campaign held at the GAW Atmospheric Station of Mace Head, Ireland, from 8 to 28 June 2009. The study is a two-step investigation of the BL structure based (i) on the intercomparison of backscatter profiles from the three laser sensors and (ii) on the comparison of the backscatter profiles with twenty-three radiosoundings performed during the period of 8 to 15 June 2009. The Temporal Height-Tracking (THT) algorithm was applied to the three sensors' backscatter profiles to retrieve the decoupled structure of the BL over Mace Head. The results of the intercomparisons are expressed in terms of the mean correlation coefficients, mean bias (difference between two sensors' detections), mean sigma (the standard deviation of the bias) and the consistency, i.e. the percentage of cases where the detections of the intercompared sensors were closer than 200 m. The ALS300-CHM15K comparison provided the most consistent retrievals amongst the three comparisons with, respectively, the 86.5% and 77.2% of the lower and upper layer detections closer than 200 m and with correlation coefficients equal to 0.88 and 0.83 at the lower and upper layer, respectively. The lidar and ceilometers-detected BL heights were then compared to the temperature profiles retrieved by radiosoundings. The most consistent retrievals at the lower layer are from the ALS300 with the 75% of detections closer than 200 m to the radiosoundings' first temperature inversion. Despite the lower signal-to-noise ratio and R-value compared to the ASL300 and CHM15K, the CL31 is more consistent with the radiosoundings retrievals at the upper layer with 62.5% of detections closer than 200 m to the radiosoundings' second temperature inversion. The ALS300 has larger pulse-averaged power compared to the two ceilometers and better ability in detecting fine aerosol layers within the BL. The comparison of remote and in-situ data proved both the veracity of the inherent link between temperature and aerosol backscatter profiles, and the existence of possible limitations in using aerosols as a tracer to detect the BL structure.

Twelve case studies of multilayer cloud-base height (CBH) retrievals from two collocated ceilometers (Vaisala CL31 and Jenoptik CHM15K) have been analyzed. The studies were performed during the period from September to December 2008 at the Mace Head Atmospheric Research Station in Ireland. During the period of measurement, the two instruments provided vertical profiles of backscattered laser signal as well as the manufacturer’s operational cloud-base product. The cases selected covered a diverse range of cloud-cover conditions, ranging from single to multiple cloud layers and from cloud-base heights varying from only a few hundreds meters per day up to 3–5 km in a few hours. The results show significant offsets between the two manufacturer-derived CBHs along with a considerable degree of scatter. Using a newly developed temporal height-tracking (THT) algorithm applied to both ceilometers, significant improvement in the correlation between CBH derived from both instruments results in a correlation coefficient increasing to R2 = 0.997 (with a slope of 0.998) from R2 = 0.788 (with an associated slope of 0.925). Also, the regression intercept (offset) is reduced from 160 m to effectively zero (−3 m). For the worst individual case study, using the THT algorithm resulted in the correlation coefficient improving from R2 = 0.52, using the manufacturer’s output, to R2 = 0.97 with a reduction in the offset reducing from 569 to 32 m. Applying the THT algorithm to the backscatter profiles of both instruments led to retrieved cloud bases that are statistically consistent with each other and ensured reliable detection of CBH, particularly when inhomogeneous cloud fields were present and changing rapidly in time. The THT algorithm also overcomes multiple false cloud-base detections associated with the manufacturer’s output of the two instruments.

Two flights have been performed by the FAAM BAe 146-301 large Atmospheric Research Aircraft in the coastal atmosphere of Mace Head, Ireland, on the 9th and the 10th of December 2010 in the framework of the Marine Aerosol–CLOUD Interactions (MACLOUD) field campaign to study the microphysics of two liquid stratocumuli. Instruments onboard the FAAM BAe aircraft provided in situ measurements of the main liquid cloud microphysical variables. The latest-generation cloud microphysics retrieval method SYRSOC (SYnergistic Remote Sensing Of Cloud) has been compared with the microphysics observed by the in-situ aircraft measurements and with the METEOSAT Second Generation geostationary system, the Spinning Enhanced Visible and Infra Red Imager (SEVIRI). Synergistic profiling from LIDAR, Doppler ka-band cloud RADAR and humidity and temperature microwave radiometer have been used by SYRSOC to retrieve profiles of cloud droplet number concentration (CDNC), droplet effective radius (Reff) and liquid water content (LWC) ...

International audience; Twenty-one cases of boundary-layer structure were retrieved by three co-located remote sensors, One LIDAR and two ceilometers at the coastal site of Mace Head, Ireland. Data were collected during the ICOS field campaign held at the GAW Atmospheric Station of Mace Head, Ireland, from 8th to 28th of June, 2009. The study is a two-step investigation of the BL structure based on (i) the intercomparison of the backscatter profiles from the three laser sensors, namely the Leosphere ALS300 LIDAR, the Vaisala CL31 ceilometer and the Jenoptik CHM15K ceilometer; (ii) and the comparison of the backscatter profiles with twenty-three radiosoundings performed during the period from the 8th to the 15th of June, 2009. The sensor-independent Temporal Height-Tracking algorithm was applied to the backscatter profiles as retrieved by each instrument to determine the decoupled structure of the BL over Mace Head. The LIDAR and ceilometers-retrieved BL heights were compared to the radiosoundings temperature profiles. The comparison between the remote and the in-situ data proved the existence of the inherent link between temperature and aerosol backscatter profiles and opened at future studies focusing on the further assessment of LIDAR-ceilometer comparison. © 2012 Conor Milroy et al.