Search

The enzyme-modified comet assay is a commonly used method to detect specific DNA lesions. However, still a lot of errors are made by many users, leading to dubious results and even misinterpretations. This technical note describes some critical points in the use of the enzyme-modified comet assay, such as the enzyme concentration, the time of incubation, the format used and the equipment. To illustrate the importance of these conditions/parameters, titration experiments of formamidopyrimidine DNA glycosylase (Fpg) were performed using the 2 gels/slide and the 12 minigels/slide formats (plus the 12-Gel Comet Assay Unit™). Incubation times of 15 and 30 min, and 1 h were used. Results showed that the 12 minigels/slide system requires a lower volume and concentration of Fpg. A longer time of incubation has a bigger impact when using such format. Moreover, the paper describes how to perform and interpret a titration experiment when using the enzyme-modified comet assay., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Assays that measure DNA damage and repair are critical in evaluating the extent to which therapeutic agents damage DNA and in identifying whether DNA repair can limit the toxicity of chemotherapy. The COMET assays described in this guide should help readers evaluate single and double-strand breaks cause by chemotherapeutic agents and also monitor the ability of the cells to repair such damage. The EJDR assay described is a valuable tool to assess the ability of drugs and DNA repair proteins to modulate DNA repair capacity. Finally, the immunofluorescence assay described should allow accurate assessments of DNA damage and the kinetics of repair as measured by Ɣ-H2AX foci. This procedure can also be used to mechanistically investigate the recruitment of specific DNA damage and repair proteins in CLL cells.

Genotoxicity is associated with serious health effects and includes different types of DNA lesions, gene mutations, structural chromosome aberrations involving breakage and/or rearrangements of chromosomes (referred to as clastogenicity) and numerical chromosome aberrations (referred to as aneuploidy). Assessing the potential genotoxic properties of chemicals, including nanomaterials (NMs), is a key element in regulatory safety assessment. State-of-the-art genotoxicity testing includes a battery of assays covering gene mutations, structural and numerical chromosome aberrations. Typically various in vitro assays are performed in the first tier. It is not very likely that NMs may induce as yet unknown types of genotoxic damage beyond what is already known for chemicals. Thus, principles of genotoxicity testing as established for chemicals should be applicable to NMs as well. However, established test guidelines (i.e., OECD TG) may require adaptations for NM testing, as currently under discussion at the OECD. This chapter gives an overview of genotoxicity testing of NMs in vitro based on experiences from various research projects. We recommend a combination of a mammalian gene mutation assay (at either Tk or HPRT locus), the in vitro comet assay, and the cytokinesis-block micronucleus assay, which are discussed in detail here. In addition we also include the Cell Transformation Assay (CTA) as a promising novel test for predicting NM-induced cell transformation in vitro.

Human biomonitoring studies aim to identify potential exposures to environmental, occupational, or lifestyle toxicants in human populations and are commonly used by public health decision makers to predict disease risk. The Comet assay measures changes in genomic stability and is one of the most reliable biomarkers to indicate early biological effects and therefore accepted by various governmental regulatory agencies. The appeal of the Comet assay lies in its relative simplicity, rapidity, sensitivity, and economic efficiency. Furthermore, the assay is known for its broad versatility, as it can be applied to virtually any human cell and easily adapted in order to detect particular biomarkers of interest, such as DNA repair capacity or single and double-strand breaks. In a standard experiment, isolated single cells are first embedded in agarose, and then lysed in high-salt solutions in order to remove all cellular contents except the DNA attached to a nuclear scaffold. Subsequent electrophoresis results in accumulation of undamaged DNA sequences at the proximity of the nuclear scaffold, while damaged sequences migrate toward the anode. When visualized with fluorochromes, these migrated DNA fragments resemble a Comet tail and can be quantified for their intensity and shape according to internationally drafted guidelines.

The comet assay (single cell gel electrophoresis) is a sensitive, versatile method for detecting DNA damage in eukaryotic cells. The traditional comet assay format has 1 or 2 gels on a microscope slide, 1 sample per slide, and there is a limit of 40 gels per experiment given the size of a typical electrophoresis tank. To increase throughput, we have designed and tested a system with 12 minigels on one slide, allowing analysis of up to 12 times more samples in one electrophoresis run. The novel comet assay format compares well with the traditional technology. The various steps are suitable for further automation, and the formats can be adapted to fully automated scoring. The new procedures save time at all stages as fewer slides are handled, and the amounts of reagents needed are reduced significantly. This format is particularly useful for testing of numerous genotoxic agents and nanomaterials at different concentrations and on different types of cells; simultaneous analysis of different lesions using a range of enzymes; and analysis of cell extracts for DNA repair activity.

This article describes a paper-based low cost single cell HaloChip assay that can be used to assess drug- and radiation-induced DNA damage at point-of-care. Printing ink on paper effectively blocks fluorescence of paper materials, provides high affinity to charged polyelectrolytes, and prevents penetration of water in paper. After exposure to drug or ionizing radiation, cells are patterned on paper to create discrete and ordered single cell arrays, embedded inside an agarose gel, lysed with alkaline solution to allow damaged DNA fragments to diffuse out of nucleus cores, and form diffusing halos in the gel matrix. After staining DNA with a fluorescent dye, characteristic halos formed around cells, and the level of DNA damage can be quantified by determining sizes of halos and nucleus with an image processing program based on MATLAB. With its low fabrication cost and easy operation, this HaloChip on paper platform will be attractive to rapidly and accurately determine DNA damage for point-of-care evaluation of drug efficacy and radiation condition. Graphical Abstract Single cell HaloChip on paper.

DNA damaging agents can promote aging, disease and cancer and they are ubiquitous in the environment and produced within human cells as normal cellular metabolites. Ironically, at high doses DNA damaging agents are also used to treat cancer. The ability to quantify DNA damage responses is thus critical in the public health, pharmaceutical and clinical domains. Here, we describe a novel platform that exploits microfabrication techniques to pattern cells in a fixed microarray. The 'CometChip' is based upon the well-established single cell gel electrophoresis assay (a.k.a. the comet assay), which estimates the level of DNA damage by evaluating the extent of DNA migration through a matrix in an electrical field. The type of damage measured by this assay includes abasic sites, crosslinks, and strand breaks. Instead of being randomly dispersed in agarose in the traditional assay, cells are captured into an agarose microwell array by gravity. The platform also expands from the size of a standard microscope slide to a 96-well format, enabling parallel processing. Here we describe the protocols of using the chip to evaluate DNA damage caused by known genotoxic agents and the cellular repair response followed after exposure. Through the integration of biological and engineering principles, this method potentiates robust and sensitive measurements of DNA damage in human cells and provides the necessary throughput for genotoxicity testing, drug development, epidemiological studies and clinical assays.

Objectives: Dental composite materials come into direct contact with oral tissue, especially gingival cells. This study was performed to evaluate possible DNA damage to gingival cells exposed to resin composite dental materials., Materials and Methods: Class V restorations were placed in 30 adult patients using two different composite resins. The epithelial cells of the gingival area along the composite restoration were sampled prior to and after 7, 30, and 180 days following the restoration of the tooth. DNA damage was analysed by comet and micronucleus assays in gingival exfoliated epithelial cells., Results: The results showed significantly higher comet assay parameters (tail length and % DNA in the tail) within periods of 30 and 180 days. The micronucleus test for the same exposure time demonstrated a higher number of cells with micronuclei, karyolysis, and nuclear buds. Results did not reveal any difference between the two composite materials for the same duration of exposure., Conclusion: Based on the results, we can conclude that the use of composite resins causes cellular damage. As dental composite resins remain in intimate contact with oral tissue over a long period of time, further research on their possible genotoxicity is advisable., Clinical Relevance: Long-term exposure of gingival cells to two different composite materials demonstrated certain DNA damage. However, considering the significant decline in micronuclei frequency after 180 days and efficiency in the repair of primary DNA damage, the observed effects could not be indicated as biologically relevant.

The single-cell gel electrophoresis--the comet assay--has proved to be a sensitive and relatively simple method that is much used in research for the analysis of specific types of DNA damage, and its use in genotoxicity testing is increasing. The efficiency of the comet assay, in terms of number of samples processed per experiment, has been rather poor, and both research and toxicological testing should profit from an increased throughput. We have designed and validated a format involving 96 agarose minigels supported by a hydrophilic polyester film. Using simple technology, hundreds of samples may be processed in one experiment by one person, with less time needed for processing, less use of chemicals and requiring fewer cells per sample. Controlled electrophoresis, including circulation of the electrophoresis solution, improves the homogeneity between replicate samples in the 96-minigel format. The high-throughput method described in this paper should greatly increase the overall capacity, versatility and robustness of the comet assay.

With a direct link to cancer, aging, and heritable diseases as well as a critical role in cancer treatment, the importance of DNA damage is well-established. The intense interest in DNA damage in applications ranging from epidemiology to drug development drives an urgent need for robust, high throughput, and inexpensive tools for objective, quantitative DNA damage analysis. We have developed a simple method for high throughput DNA damage measurements that provides information on multiple lesions and pathways. Our method utilizes single cells captured by gravity into a microwell array with DNA damage revealed morphologically by gel electrophoresis. Spatial encoding enables simultaneous assays of multiple experimental conditions performed in parallel with fully automated analysis. This method also enables novel functionalities, including multiplexed labeling for parallel single cell assays, as well as DNA damage measurement in cell aggregates. We have also developed 24- and 96-well versions, which are applicable to high throughput screening. Using this platform, we have quantified DNA repair capacities of individuals with different genetic backgrounds, and compared the efficacy of potential cancer chemotherapeutics as inhibitors of a critical DNA repair enzyme, human AP endonuclease. This platform enables high throughput assessment of multiple DNA repair pathways and subpathways in parallel, thus enabling new strategies for drug discovery, genotoxicity testing, and environmental health.

The comet assay is widely used to measure DNA damage and repair in basic research, genotoxicity testing and human biomonitoring. The conventional format has 1 or 2 gels on a microscope slide, 1 sample per slide. To increase throughput, we have designed and tested a system with 12 smaller gels on one slide, allowing incubation of individual gels with different reagents or enzymes. Thus several times more samples can be analysed with one electrophoresis run, and fewer cells and smaller volumes of test solutions are required. Applications of the modified method include treatment with genotoxic agents at different concentrations; simultaneous analysis of different lesions using a range of enzymes; analysis of cell extracts for DNA repair activity; and fluorescent in situ hybridisation (FISH) to comet DNA with specific labelled probes., (Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.)

The comet assay (single-cell gel electrophoresis) is a sensitive and simple method for measuring DNA damage. An early modification of the assay involved the application of specific repair endonucleases to convert lesions to breaks; thus, for example, endonuclease III was used to measure oxidized pyrimidines. This concept has now been extended to produce an in vitro assay for DNA repair activity in a cell-free extract, for example from lymphocytes. The extract is incubated with substrate DNA containing specific base damage, and repair incision is detected as breaks in this DNA. We have recently been studying effects of phytochemicals in cultured cells, whether as antioxidants or as potential modulators of DNA repair. We realized that there is a need to check that observed effects that appear as an enhancement of repair (i.e. increased breaks in substrate DNA) are not simply due to a direct damaging effect of the phytochemical or to induction of non-specific nucleases. Here, we describe a rigorous approach to testing for this possibility, which we recommend to anyone carrying out similar experiments.

The concept of species sensitivity differences is important in ecotoxicology and environmental risk assessment, but testing usually focuses on lethality of toxicants. The effects on the suborganismal level are mostly ignored; therefore, the present study assessed a biomarker of genotoxicity (the alkaline comet assay) to compare species sensitivities. Five earthworm species (Amynthas diffringens, Aporrectodea caliginosa, Dendrodrilus rubidus, Eisenia fetida and Microchaetus benhami) were exposed for 48 h to sublethal concentrations of cadmium sulphate in reconstituted soil water and DNA integrity was evaluated with the parameter Tail DNA %. Significant amounts of DNA damage were detected in three (A. caliginosa, D. rubidus and E. fetida) species. E. fetida exhibited the highest level of DNA damage, although D. rubidus showed the highest increase (3-fold) in DNA damage from the control. All exposed earthworms accumulated Cd, although body loads did not correspond with DNA damage levels; most of the Cd was probably sequestrated and rendered harmless.

We report on the fabrication and performance of a gel microfluidic chip interfaced to laser desorption/ionization (LDI) mass spectrometry with a time-of-flight mass analyzer. The chip was fabricated from poly(methylmethacrylate) with a poly(dimethyl siloxane) cover. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis was performed in the channel of the microfluidic chip. After electrophoresis, the cover was removed and either the PDMS chip or the PMMA cover was mounted in a modified MALDI ion source for analysis. Ions were formed by irradiating the channel with 2.95 microm radiation from a pulsed optical parametric oscillator (OPO), which is coincident with IR absorption by N-H and O-H stretch of the gel components. No matrix was added. The microfluidic chip design allowed a decrease in the volume of material required for analysis over conventional gel slabs, thus enabling improvement in the detection limit to a pmol level, a three orders of magnitude improvement over previous studies in which desorption was achieved from an excised section of a conventional gel.

The present paper studied the feasibility of applying comet assay to evaluate the DNA damage in individual HeLa cervix cancer cells after alpha-particle irradiation. We prepared thin CR-39 detectors (<20 microm) as cell-culture substrates, with UV irradiation to shorten the track formation time. After irradiation of the HeLa cells by alpha particles, the tracks on the underside of the CR-39 detector were developed by chemical etching in (while floating on) a 14 N KOH solution at 37 degrees C. Comet assay was then applied. Diffusion of DNA out of the cells could be generally observed from the images of stained DNA. The alpha-particle tracks corresponding to the comets developed on the underside of the CR-39 detectors could also be observed by just changing the focal plane of the confocal microscope.

Background: Single-cell gel electrophoresis, or the comet assay, a technique widely used for DNA damage analysis, has been used recently for detecting DNA fragmentation in cells undergoing apoptosis. However, the number of variants of this assay used thus far primarily detected the late stages of DNA fragmentation. Therefore, monitoring the progression of DNA fragmentation, which could greatly improve the analysis of cell death induction and progression at the single-cell level, has not been possible with this assay., Methods: In the present study, a modification of the original neutral comet assay developed by Ostling and Johanson (Biochem Biophys Res Commun 123:291-298, 1984) was used to detect various stages of DNA fragmentation. This assay involves cell lysis with anionic detergents at nearly neutral pH (9.5) and does not include high salt concentration, unlike most other published methods. BMG-1 human glioma cells were induced to undergo programmed cell death by treating with a large dose (100 microM) of etoposide, and comets were prepared after different durations (1-24 h) of treatment., Results: In contrast to results of previously published studies, comets with different shapes reflecting progressive stages of DNA fragmentation were observed. Of these, six distinct shapes were identified and divided into three different categories based on the extent of fragmentation. Type A comets had a large head separated by a narrow "neck" region from an oval bulging tail that indicated initiation of fragmentation. Type B and C comets had a constantly diminishing head associated with a corresponding expansion of the tail and reflected intermediate and late stages of fragmentation, respectively. Type A and B comets appeared at a high frequency during early time points (1-6 h), whereas type C comets that indicated late stages of fragmentation were observed only after extended treatment (24 h). As a result, an elaborate kinetics of the progression of DNA fragmentation could be obtained., Conclusion: The present single-cell gel electrophoresis assay offers a significant improvement in monitoring the kinetics of DNA fragmentation induced during programmed cell death. Coupled with its simplicity and the ability to detect responses of small cell subpopulations, this method can be used for a reliable and sensitive analysis of the progression of cell death in different cell types and treatment conditions., (Copyright 2004 Wiley-Liss, Inc.)

Performing single-cell electrophoresis separations using multiple parallel microchannels offers the possibility of both increasing throughput and eliminating cross-contamination between different separations. The instrumentation for such a system requires spatial and temporal control of both single-cell selection and lysis. To address these problems, a compact platform is presented for single-cell capillary electrophoresis in parallel microchannels that combines optical tweezers for cell selection and electromechanical lysis. Calcein-labeled acute myloid leukemia (AML) cells were selected from an on-chip reservoir and transported by optical tweezers to one of four parallel microfluidic channels. Each channel entrance was manufactured by F2-laser ablation to form a 20- to 10-microm tapered lysis reservoir, creating an injector geometry effective in confining the cellular contents during mechanical shearing of the cell at the 10-microm capillary entrance. The contents of individual cells were simultaneously injected into parallel channels resulting in electrophoretic separation as recorded by laser-induced fluorescence of the labeled cellular contents., (Copyright 2004 American Chemical Society)

Purpose: To investigate the effect of 2450 MHz pulsed-wave microwaves on the induction of DNA damage in brain cells of exposed rats and to discover whether proteinase K is needed to detect DNA damage in the brain cells of rats exposed to 2450 MHz microwaves., Materials and Methods: Sprague-Dawley rats were exposed to 2450 MHz pulsed-wave microwaves and sacrificed 4 h after a 2-h exposure. Rats irradiated whole-body with 1 Gy (137)Cs were included as positive controls. DNA damage was assayed by two variants of the alkaline comet assay on separate aliquots of the same cell preparation., Results: Significant DNA damage was observed in the rat brain cells of rats exposed to gamma-rays using both versions of the alkaline comet assay independent of the presence or absence of proteinase K. However, neither version of the assay could detect any difference in comet length and/or normalized comet moment between sham- and 2450 MHz pulsed-wave microwave-exposed rats, regardless of the inclusion or omission of proteinase K in the comet assay., Conclusions: No DNA damage in brain cells was detected following exposure of rats to 2450 MHz microwaves pulsed-wave at a specific absorption rate of 1.2 W kg(-1) regardless of whether or not proteinase K was included in the assay. Thus, the results support the conclusion that low-level 2450 MHz pulsed-wave microwave exposures do not induce DNA damage detectable by the alkaline comet assay.

The quantification of DNA damage, both in vivo and in vitro, can be very time consuming, since large amounts of samples need to be scored. Additional uncertainties may arise due to the lack of documentation or by scoring biases. Image analysis automation is a possible strategy to cope with these difficulties and to generate a new quality of reproducibility. In this communication we collected some recent results obtained with the automated scanning platform Metafer, covering applications that are being used in radiation research, biological dosimetry, DNA repair research and environmental mutagenesis studies. We can show that the automated scoring for dicentric chromosomes, for micronuclei, and for Comet assay cells produce reliable and reproducible results, which prove the usability of automated scanning in the above mentioned research fields., (Copyright 2003 S. Karger AG, Basel)

Background: The comet or single-cell gel electrophoresis assay is a sensitive method for the detection of DNA damage. The main drawback of comet sampling is the low cell density necessary to prevent nucleus overlap after electrophoresis, which limits large-scale high throughput screening. Another problem may be inconsistent comet focusing. We investigated whether an approach based on three-dimensional (3D) confocal microscopy might be beneficial for these concerns., Methods: A vertical comet assay enabling three-dimensional confocal comet imaging of nuclei seeded at very high density was developed together with dedicated software algorithms to retrieve quantitative data at the single cell level., Results: Three-dimensional confocal comet imaging greatly relieved the user interactions of our nonautomated two-dimensional comet sampling procedure. Batches of comets were blindly sampled, and confocal sectioning improved the clarity of the images and the accuracy of comet sampling. A 1-Gy dose response was readily established. The sampling speed was competitive with that of commercial packages., Conclusions: Vertical comet imaging is a new concept for fast and user-friendly comet sampling that allows miniaturization of the assay. It may become an essential step toward high throughput screening and exploit the benefits of confocal imaging., (Copyright 2002 Wiley-Liss, Inc.)

Comet assay provided a object method for DNA damage caused by physical and chemical factors. A new system of SCGE image analysis, which combines microphotodensitometry and microphotography with image analysis have been developed. Compared with the international popular, it has well at speed, convenience, exchange face of Chinese and English and print. We used it to directly determine the A. flavus' DNA damages for citral. The results show that test time was shorted 2/3 and accuracy was improved. It is probable that cell structural parameter, cell molecule and membrane could be test long, successive, movably and instantly. So the new system has a wide application.

The single-cell gel electrophoresis or Comet assay is becoming established as an industrial genotoxicity screening test. The aim of this study was to increase the throughput of compounds tested and to minimize the amount of test compound needed for an assay. We modified practical aspects of our standard protocol and designed an experimental procedure suitable for use with 96-well plates. By using a suspension culture rather than attached cells, the modified protocol enabled parallel testing of four compounds on a single microplate (10 duplicate concentrations per compound). A significant reduction in work time was achieved by replacing the previously used Trypan blue dye exclusion (TBDE) test by an automated measurement of ATP levels as the concurrent viability test. The rapid and easy to perform ATP test was carried out towards the end of the 3 h treatment. In this way we were able to select for further analysis and slide preparation only those concentrations which induced the desired range of cytotoxicity. The suitability of the modified test conditions and reproducibility of test results was demonstrated by results obtained with standard mutagens and eight drug candidates tested at various concentrations. In each case the results obtained with the standard and the modified protocols were comparable. By introducing the changes to our standard protocol, combined with automated image analysis, we were able to more than double our previous throughput.

In recent years the Comet assay (or single cell gel electrophoresis assay) has been established as a rapid and sensitive method for the detection of DNA damage. For early genotoxicity screening of new chemical entities in industrial toxicology, the Comet assay is more and more used for assessment of the DNA damaging potential of a test compound. In order to increase compound screening throughput, we have established an image analysis system for fully automated measurement of microscope slides processed in the Comet assay. For the comparative investigation various cell types, such as V79 Chinese hamster cells, mouse lymphoma cells and human leukocytes, were treated with several test compounds. Using tail moment as the quantitative parameter for comet formation, we show a very high correlation between our automatic image analysis system and a commercially available, interactive system (Comet Assay II of Perceptive Instruments). The possibility of analyzing 50 samples within 1 day and the high reproducibility of results make automated image processing a powerful tool for automatic analysis of slides processed in the Comet assay.

Four cytometric assays for the assessment of radiation-induced DNA damage in individual cells are presented. Two of these, the alkaline and neutral comet assays, are useful for the detection of DNA damage due to very low radiation doses and promise to be useful for the quantitation of genomic damage after clinically or environmentally relevant exposures. The other two, the halo and halo-comet assays, reveal aspects of chromatin structure in the presence of DNA damage that reflect differences in intrinsic cellular radiosensitivity. Further development of these assays used alone, or in combination, should eventually lead to the definition of readily measurable cytometric parameters that will be useful as predictive markers for cellular responses to DNA damaging agents.

Background: Assessment of resistance to drug moieties in tissue culture is complicated by limited sample, clonal selection and alteration of cycling fraction and cycle duration in clonally mixed lesions. DNA damage assessment by single cell gel electrophoresis (SCGE) of excised DNA is limited by non-linear analysis in fluorescent light microscopy. Confocal Laser Scanning Microscopy (CLSM) with high N.A. magnification allows for quantitation of total excised DNA fragment size distribution but is still limited by the large volume required for labour intensive SCGE, precluding multi-exposure clinical testing., Aims: To optimise sample requirement for SCGE and CLS., Methods: Standard slide mounted bed gels were punched with multiple coded 6 mm wells and filled with suspensions of cells subjected to drug/concentration variations. After SCGE, 30 microns frozen sections were prepared of each well and mounted in ethidium bromide solution on multi-well hydrophilic slides to allow for short working distance of high resolution CLSM in a Zeiss Axiovert L410 SM. Testing for feasibility, reproducibility and consistency used both cultured standard leukaemic cell lines, normal human control marrow and clinical samples., Results and Conclusion: Multiple well SCGE followed by frozen section, high resolution CLSM allows for rapid analysis of high numbers of multiple drug exposure permutations clinically required.