Search

The technologically important frequency range for the application of electrostrictors and piezoelectrics is tens of Hz to tens of kHz. Sm3+- and Gd3+-doped ceria ceramics, excellent intermediate-temperature ion conductors, have been shown to exhibit very large electrostriction below 1 Hz. Why this is so is still not understood. While optimal design of ceria-based devices requires an in-depth understanding of their mechanical and electromechanical properties, systematic investigation of the influence of dopant size on frequency response is lacking. In this report, the mechanical and electromechanical properties of dense ceria ceramics doped with trivalent lanthanides (RE0.1Ce0.9O1.95, RE = Lu, Yb, Er, Gd, Sm, and Nd) were investigated. Young's, shear, and bulk moduli were obtained from ultrasound pulse echo measurements. Nanoindentation measurements revealed room-temperature creep in all samples as well as the dependence of Young's modulus on the unloading rate. Both are evidence for viscoelastic behavior, in this case anelasticity. For all samples, within the frequency range f = 0.15-150 Hz and electric field E ≤ 0.7 MV/m, the longitudinal electrostriction strain coefficient (|M33|) was 102 to 104-fold larger than expected for classical (Newnham) electrostrictors. However, electrostrictive strain in Er-, Gd-, Sm-, and Nd-doped ceramics exhibited marked frequency relaxation, with the Debye-type characteristic relaxation time τ ≤ 1 s, while for the smallest dopants-Lu and Yb-little change in electrostrictive strain was detected over the complete frequency range studied. We find that only the small, less-studied dopants continue to produce useable electrostrictive strain at the higher frequencies. We suggest that this striking difference in frequency response may be explained by postulating that introduction of a dopant induces two types of polarizable elastic dipoles and that the dopant size determines which of the two will be dominant.

Self‐healing (SH) of (opto)electronic material damage can have a huge impact on resource sustainability. The rising interest in halide perovskite (HaP) compounds over the past decade is due to their excellent semiconducting properties for crystals and films, even if made by low‐temperature solution‐based processing. Direct proof of self‐healing in Pb‐based HaPs is demonstrated through photoluminescence recovery from photodamage, fracture healing and their use as high‐energy radiation and particle detectors. Here, the question of how to find additional semiconducting materials exhibiting SH, in particular lead‐free ones is addressed. Applying a data‐mining approach to identify semiconductors with favorable mechanical and thermal properties, for which Pb HaPs are clear outliers, it is found that the Cs2AuIAuIIIX6, (X = I, Br, Cl) family, which is synthesized and tested for SH. This is the first demonstration of self‐healing of Pb‐free inorganic HaP thin films, by photoluminescence recovery. [ABSTRACT FROM AUTHOR]

Atomic force microscopy is highly suited for characterizing morphology and physical properties of nanoscale objects. The application of this technique to nanomechanical studies is, therefore, exploited in a wide range of fields from life sciences to materials science and from miniature devices to sensors. Although performing a mechanical measurement can be straightforward and accessible to novice users, obtaining meaningful results requires knowledge and experience not always evident in standard instrumental software modules. In this paper, we provide a basic guide to proper protocols for the measurement and analysis of force curves and related atomic force microscopic techniques. Looking forward, we also survey the budding application of machine learning in this discipline. [ABSTRACT FROM AUTHOR]

Lissencephaly-1 (LIS1) is associated with neurodevelopmental diseases and is known to regulate the molecular motor cytoplasmic dynein activity. Here we show that LIS1 is essential for the viability of mouse embryonic stem cells (mESCs), and it governs the physical properties of these cells. LIS1 dosage substantially affects gene expression, and we uncovered an unexpected interaction of LIS1 with RNA and RNA-binding proteins, most prominently the Argonaute complex. We demonstrate that LIS1 overexpression partially rescued the extracellular matrix (ECM) expression and mechanosensitive genes conferring stiffness to Argonaute null mESCs. Collectively, our data transforms the current perspective on the roles of LIS1 in post-transcriptional regulation underlying development and mechanosensitive processes. LIS1 protein is important for brain development and stem cells' survival. Here the authors show that LIS1 binds RNA and interact with RNA-binding proteins regulating the physical properties of mouse embryonic stem cells. [ABSTRACT FROM AUTHOR]

A protocol for successfully depositing [001] textured, 2–3 µm thick films of Al0.75Sc0.25N, is proposed. The procedure relies on the fact that sputtered Ti is [001]-textured α -phase (hcp). Diffusion of nitrogen ions into the α-Ti film during reactive sputtering of Al0.75,Sc0.25N likely forms a [111]-oriented TiN intermediate layer. The lattice mismatch of this very thin film with Al0.75Sc0.25N is ~3.7%, providing excellent conditions for epitaxial growth. In contrast to earlier reports, the Al0.75Sc0.25N films prepared in the current study are Al-terminated. Low growth stress (<100 MPa) allows films up to 3 µm thick to be deposited without loss of orientation or decrease in piezoelectric coefficient. An advantage of the proposed technique is that it is compatible with a variety of substrates commonly used for actuators or MEMS, as demonstrated here for both Si wafers and D263 borosilicate glass. Additionally, thicker films can potentially lead to increased piezoelectric stress/strain by supporting application of higher voltage, but without increase in the magnitude of the electric field. [ABSTRACT FROM AUTHOR]