Search

The use of skin barrier-enhancing topical medication is a favorable approach for the treatment of occupational hand dermatitis (OHD). Cocos nucifera or coconut oil is one of the best sources of lipid enriched with laurate acid, and glycerin is a well-known humectant that improves skin hydration. This study is aimed is to evaluate the effectiveness of C. nucifera and glycerin for secondary prevention of OHD among batik (Indonesian traditional fabric) workers. In a randomized, double-blind, crossover trial, the effect of glycerine-C. nucifera cream versus glycerin-only was considered with multiple afterwork applications of moisturizer over a 2-week period on batik workers with OHD. Assessment of trans-epidermal water loss (TEWL), skin capacitance, and a clinical assessment using the Hand Eczema Severity Index (HECSI) were carried out at day 0 and 14. The results show thirty-two batik dyeing and/or rinsing workers were enrolled in the study with mild to moderate OHD. Clinical improvement was demonstrated by 20% decrease in HECSI and TEWL, and 20% increase in skin capacitance. Both moisturizers were equally effective for the secondary prevention of OHD. As a conclusion, glycerine-C. nucifera and glycerin-only cream are equally effective for secondary prevention for OHD among batik worker to reduce the prevalence of hand dermatitis., (© 2024. The Author(s).)

Unmanned aerial vehicle (UAV) sprayers are widely utilized in commercial aerial application of plant protection products (PPPs) in East Asian countries due to their high flexibility, high efficiency and low cost, but spray drift can lead to low utilization of UAV sprayers application, environmental pollution and bystander exposure risk. Droplet size and spray volume are critical factors affecting spray drift. Currently, the high temperature and humidity environment under the influence of the tropical monsoon climate brings new challenges for UAV sprayers. Therefore, in this study, pesticides were simulated with seduction red solution, and spraying trials were conducted using the DJI commercial T40 UAV sprayers for a typical tropical crop, coconut. In this study, the spray drift distribution of droplets on the ground and in the air, as well as the bystander exposure risk, were comparatively analyzed using droplet size (VF, M, and C) and spray volume (75 L/hm 2 and 60 L/hm 2 ) as trial variables. The results indicated that the spray drift characteristics of UAV sprayers were significantly affected by droplet size and spray volume. The spray drift percentage was negatively correlated with the downwind distance and the sampling height. The smaller the droplet size, the farther the buffer zone distance, up to more than 30 m, and the cumulative drift percentage is also greater, resulting in a significant risk of spray drift. The reduction in spray volume helped to reduce the spray drift, and the cumulative drift percentage was reduced by 73.87 % with a droplet size of M. The region of the body where spray drift is deposited the most on bystanders is near chest height. This study provides a reference for the rational and safe use of multirotor UAV sprayers application operations in the tropics and enriches the spray drift database in the tropics., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Coconut wood (Cocos nucifera L.) is lightweight and has variable quality, making it a potential candidate for manufacturing sound absorption boards. However, its sound absorption coefficient needs enhancement to optimize its effectiveness in this application. This study aims to enhance its sound absorption properties using eco-friendly hydrogen peroxide and acetic acid treatments. This treatment modified the carbohydrate polymers (hemicellulose and cellulose) and lignin structures in the wood cell wall. The novelty of this approach lies in using these chemicals to improve acoustic performance significantly. Coconut wood samples were treated with a 1:1 acetic acid and hydrogen peroxide mixture for 20, 40, 60, and 80 min. Characterization techniques such as FTIR, XPS, and XRD, and 3D optical profilometry analyzed changes in chemical functionalities, crystallinity, and surface roughness. Sound absorption coefficients were measured using the impedance tube method. Results showed a significant improvement in sound absorption for all treated samples, especially at 60 min. The treatment also enhanced surface roughness, air permeability, porosity, and pore sizes, contributing to better sound absorption. This proposed treatment method addresses environmental consciousness and enhances the sustainable use and utilization of coconut wood., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Moreover, no animal studies or human participants are involved in this study., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The functional properties of protein are affected by their aggregation behavior and morphology. In this study, the self-assembled coconut protein aggregates with specific morphology, including small amorphous aggregates (WLA), spherical-like aggregates (SLA) and rod-like aggregates (RLA), were regulated to form. The self-assembled process resulted in a decrease in fluorescence intensity and an increase in the surface hydrophobicity of coconut protein. Fucoidan was added to improve the stability of protein solutions, and the interfacial adsorption behavior was evaluated by dilatational rheology analysis. The results showed that the aggregation state of coconut protein affected its ability to reduce surface tension, and the interfacial layers mainly exhibited elastic property at oil-water interface (tanφ < 0.5). For macroscale analysis, the emulsions based on self-assembled coconut protein exhibited smaller droplet size, better rheological properties and centrifugal stability, especially WLA and RLA. This study may provide a reference to inspire the utilization of self-assembled coconut protein in the food industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Some consumers are replacing cow's milk with plant-based milk alternatives (PBMAs). The present study aimed to characterize the lipid profiles of cow's milk ( n = 60) and PBMA types (soya, oat, rice, almond, coconut, and hazelnut; n = 10 per type). Significant differences were found in the fatty acid (FA) profiles of PBMAs and milk, particularly in FA diversity (15 FAs in PBMAs vs 54 FAs in milk) and the proportion of prime FA groups. The FA profile of coconut was dominated by saturated FAs (SFA), whereas monounsaturated FAs (MUFA) or polyunsaturated FAs (PUFA) were dominant in the remaining PBMA types. Cholesterol was not detected in any PBMA type. The FA profile of milk FAs was dominated by SFA; however, different individual SFA have varying health outcomes. Additionally, milk contains some FA groups with health-promoting properties, such as methyl-branched-chain FAs (BCFA) and conjugated linoleic acid (CLA), both of which are absent in PBMAs.

The current study evaluated the potential enhancement of lauric acid (LA) in black soldier fly, Hermetia illucens, (L.) (Diptera: Stratiomyidae) larvae (BSFL), a source of this short-chain fatty acid which has antimicrobial and immunostimulatory properties. Replicate groups of BSFL were reared on either the coconut or Gainesville diet for 7 days. After the rearing period, BSFL were harvested, purged, dried, and subjected to proximate, fatty acid and amino acid compositions, and pepsin digestibility analyses. Results demonstrate changes in proximate composition. BSFL reared on the coconut had significantly (P = 0.002) higher lipid content (47.3% vs. 25.2%) on a dry-matter basis. The LA concentration in BSFL produced on the coconut was 31% greater than those reared on Gainesville, resulting in almost 150% more LA. Furthermore, BSFL-fed coconut had reduced crude protein (29.7% of dry weight) and ash (3.7% of dry weight) relative to those fed Gainesville (43.4% and 7.5% for crude protein and ash, respectively) but higher pepsin digestibility (91.0% vs. 87.0%). The relative amounts of various amino acids in the 2 BSFL meals did not differ extensively, with statistically lower concentrations of only phenylalanine and tryptophan and higher concentrations of alanine, arginine, isoleucine, leucine, and serine in BSFL reared on coconut. Results demonstrate that the nutritional composition of BSFL can be manipulated, and an enhancement of LA concentrations of 150% was achieved with coconut, which has value for BSFL as a feed for various livestock, including aquaculture. Lower protein content is a tradeoff in terms of BSFL value as a feed additive., (© The Author(s) 2024. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

Fabricating metal oxide nanoparticles has garnered much attention lately because creating safe chemicals, sustainable materials, economic processes, and renewable resources is becoming increasingly important. This research shows how TiO 2 nanoparticles (NPs) could be generated in an ecologically responsible way using waste coconut husk with the help of tender coconut. This extract functions as both a reducing agent and a sealing agent. The investigation of TiO 2 NPs exploited ultraviolet (UV), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and field-emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray (EDX) methods. The germicidal properties of TiO 2 NPs against food-borne pathogenic strains were studied using the agar well method. Employing Congo red pigment, the photodecomposition behavior was investigated. The TiO 2 NPs produced had a crystallite size measuring 16.2 nm. The average grain size of the sample, as measured by FE-SEM inspection, falls within the range of 15 to 25 nm. Impressive anti-germ effects against food-borne germs like Gram-positive (Staphylococcus aureus and Listeria monocytogenes), Gram-negative (Salmonella typhimurium and Escherichia coli) bacteria, and fungi (Candida albicans and Aspergillus niger) have been proved by the sustainable fabrication of TiO 2 NPs. The catalytic effectiveness of Congo red decreased by 88% after 90 min. The findings suggest that sustainable synthesis of TiO 2 NPs is an effective tool for food-borne germicides and photodecomposition behaviors., (© 2024 John Wiley & Sons Ltd.)

New routes for biomass valorization have been developing by the scientific community. The aim of this work was developing a novel OrganoCat-based protocol and deeply understand the structure of the obtained lignins. Microwave-assisted OrganoCat-based process was performed using a biphasic system (ethyl acetate and oxalic acid or HCl) at mild conditions. OrganoCat-based lignins (OCLs) were characterized by compositional analysis, FTIR, 1 H, 13 C, 1 H 13 C HSQC, 31 P NMR, TGA and GPC. The solubility of OCLs in different organic solvents and their antioxidant capacity against DPPH were investigated. The spectroscopic analyses showed that OCLs have high residual extractives and the lignin motifs were preserved. OCLs have presented lower thermal stability than MWL, but showed great antioxidant activities and high solubility in a wide range of organic solvents. A novel biorefinery protocol yielded coconut shell lignins with peculiar structural and compositional features and several technological applications through an eco-friendly, sustainable and relatively low-cost biphasic pulping process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The urgent need for a simple and cost-effective thermochemical process to produce biochar has prompted this study. The aim was to develop a straightforward thermochemical process under O 2 -limited conditions for the production of coconut-based biochar (CBB) and to assess its ability to remove methylene blue (MB) through adsorption, comparing it with CBB produced by slow pyrolysis. CBBs were obtained under different atmospheric conditions (O 2 -limited, muffle furnace biochar (MFB); and inert, pyrolytic reactor biochar (PRB)), at 350, 500, and 700 °C, and for 30 and 90'. MFB and PRB were characterized using FTIR, RAMAN, SEM, EDS, and XRD analyses. Adsorption tests were conducted using 1.0 g L -1 of MFB and PRB, 10 mg L -1 of MB at 25 °C for 48 h. Characterization revealed that atmospheric conditions significantly influenced the yield and structural features of the materials. PRB exhibited higher yields and larger cavities than MFB, but quite similar spectral features. Adsorption tests indicated that MFB and PRB had q t values of 33.1 and 9.2 mg g- 1 , respectively, which were obtained at 700 °C and 90', and 700 °C and 30', respectively. This alternative method produced an innovative and promising lignocellulose-based material with great potential to be used as a biosorbent., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This review investigates coconut as a sustainable and nutrient-rich plant-based alternative to traditional animal-based food sources. We have explored the nutritional profile, culinary versatility, particularly focusing on the use of coconut meat, milk, cream, and oil in diverse dietary contexts when consumed in balance. Comparative analysis with animal-derived products reveals the high content of medium-chain triglycerides (MCTs), essential vitamins, and minerals in coconut, contrasted with its lower protein content. Researchers have underscored the environmental sustainability of coconut, advocating for its role in eco-friendly food production chains. We have also addressed challenges like potential allergies, nutritional balance, sensory attributes, and consumer motivations for coconut-based products, in terms of understanding the market dynamics. In conclusion, this review positions coconut as a promising candidate within sustainable diet frameworks, advocating for further research to augment its nutritional value, sensory characteristics, and product stability, thereby facilitating its integration into health-conscious and eco-centric dietary practices.

The treatment of raw foul air that could escape to the atmosphere from the head space of the incoming wastewater sewer lines into a Southern California Water Resource Recovery Facility was evaluated by using a 1/20th scale pilot unit consisting of three different granular activated carbon filter technologies, operating side by side, under similar operating conditions, each having an average 3.8-s contact time. The three activated carbon filters contained each 0.07 m 3 of coconut, coal, and coconut mixed with permanganate media. The foul air entering the granular activated carbon filters contained 82% to 83% relative humidity. No moisture removal mechanism was used prior to treatment. The removal of six different odor characters from eight chemical odorants present in the foul air were assessed. These were rotten egg (hydrogen sulfide), rotten vegetables (methyl mercaptan), canned corn (dimethyl sulfide), rotten garlic (dimethyl disulfide), earthy/musty (2-methyl isoborneol and 2-isopropyl 3-methoxy pyrazine), and fecal (skatole and indole). This is the first time a study evaluates the removal of specific odors by simultaneously employing sensory analyses using the odor profile method, which defines the different odor characters and intensities, together with chemical analyses of the odorants causing these odors. The results show that the three granular activated carbon filters, before hydrogen sulfide breakthrough, provided significant improvement in odor intensity and odorant removal. Breakthrough was reached after 57 days for the coconut mixed with permanganate, 107 days for the coconut, and 129 days for the coal granular activated carbon filter. Breakthrough (the critical saturation point of the activated carbon media) was considered reached when the hydrogen sulfide percentage removal diminished to 90% and continued downward. The coconut mixed with permanganate granular activated carbon filter provided the best treatment among the media tested, achieving very good reduction of odorants, as measured by chemical analyses, and reasonable removal of odor intensities, as measured by the odor profile method. The coconut mixed with permanganate granular activated carbon is recommended for short-term odor control systems at sewer networks or emergency plant maintenance situations given its shorter time to breakthrough compared with the other granular activated carbons. The coal and coconut granular activated carbon filters are generally used as the last stage of an odor treatment system. Because of the observed poor to average performance in removing odorants other than hydrogen sulfide, the treatment stage(s) prior to the use of these granulated activated carbons should provide a good methyl mercaptan removal of at least 90% in order to avoid the formation of dimethyl disulfide, which, in the presence of moisture in the carbon filter, emit the characteristic rotten garlic odor. The differences observed between the performances based on odorant removal by chemical analysis compared with those based on sensorial analyses by the odor profile method indicate that both analyses are required to understand more fully the odor dynamics. PRACTITIONER POINTS: Three virgin granulated activated carbon media were evaluated in a field pilot unit using raw collections foul air. Coal, coconut, and coconut mixed with permanganate were tested until breakthrough. Samples were analyzed both chemically (odorants) and sensorially (odors). Coconut mixed with permanganate proved to be the media that better reduced odorants and odors., (© 2024 Water Environment Federation.)

Kopyor is a coconut with unique characteristics from Indonesia, one of the largest coconut producers in the world. Kopyor is an edible mature coconut with soft endosperm. Although this fruit is one of the most popular coconuts in the world, there are limited studies on its properties, including its sensory attributes and metabolite profiles. This study investigates the characteristics of kopyor using sensory evaluation, a widely targeted metabolomics approach, and multivariate analysis. The liquid (water) and solid (flesh) endosperms were collected as the samples. The results showed that kopyor has characteristics that distinguish it from normal mature and young coconuts. Kopyor water has a milky, creamy, nutty, bitter, and astringent taste with an oily aftertaste and mouthfeel. Kopyor flesh is soft and moist and gives a sandy mouth feel. This study analyzed the sensory attributes of the kopyor endosperm for the first time and compared it with those of normal mature and young coconuts. A gas chromatography mass spectrometry analysis showed that kopyor contained wider variety of metabolites than normal coconuts of the same age. Based on the differential analysis and orthogonal projections to latent structures-regression, kopyor water was characterized by the accumulation of flavor-related metabolites, such as amino acids and organic acids, which contributed to its sensory complexity. This study solidified the effects of maturation and endosperm type on metabolite accumulation in kopyor endosperm. This pioneering information will lead to the future use of kopyor and other unique coconuts worldwide for food, contributing to the sustainability of the coconut industry., (Copyright © 2024. Published by Elsevier B.V.)

The food industry has grown with the demands for new products and their authentication, which has not been accompanied by the area of analysis and quality control, thus requiring novel process analytical technologies for food processes. An electronic tongue (e-tongue) is a multisensor system that can characterize complex liquids in a fast and simple way. Here, we tested the efficacy of an impedimetric microfluidic e-tongue setup - comprised by four interdigitated electrodes (IDE) on a printed circuit board (PCB), with four pairs of digits each, being one bare sensor and three coated with different ultrathin nanostructured films with different electrical properties - in the analysis of fresh and industrialized coconut water. Principal Component Analysis (PCA) was applied to observe sample differences, and Partial Least Squares Regression (PLSR) was used to predict sample physicochemical parameters. Linear Discriminant Analysis (LDA) and Partial Least Square - Discriminant Analysis (PLS-DA) were compared to classify samples based on data from the e-tongue device. Results indicate the potential application of the microfluidic e-tongue in the identification of coconut water composition and determination of physicochemical attributes, allowing for classification of samples according to soluble solid content (SSC) and total titratable acidity (TTA) with over 90% accuracy. It was also demonstrated that the microfluidic setup has potential application in the food industry for quality assessment of complex liquid samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: The inherent properties of coconut oil (CO), including its elevated saturated fatty acid content and low melting point, make it suitable for application in plastic fat processing. The present study explores the physicochemical characteristics, micromorphology and oxidative stability of oleogels produced from CO using various gelators [ethylcellulose (EC), β-sitosterol/γ-oryzanol (PS) and glyceryl monostearate (MG)] to elucidate the formation mechanisms of coconut oleogels (EC-COO, PS-COO and MG-COO)., Results: Three oleogel systems exhibited a solid-like behavior, with the formation of crystalline forms dominated by β and β'. Among them, PS-COO exhibited enhanced capability with respect to immobilizing liquid oils, resulting in solidification with high oil-binding capacity, moderate hardness and good elasticity. By contrast, MG-COO demonstrated inferior stability compared to PS-COO and EC-COO. Furthermore, MG-COO and PS-COO demonstrated antioxidant properties against CO oxidation, whereas EC-COO exhibited the opposite effect. PS-COO and EC-COO exhibited superior thermodynamic behavior compared to MG-COO., Conclusion: Three oleogels based on CO were successfully prepared. The mechanical strength, storage modulus and thermodynamic stability of the CO oleogel exhibited concentration dependence with increasing gelling agent addition. PS-COO demonstrated relatively robust oil-binding capacity and oxidative stability, particularly with a 15% PS addition. This information contributes to a deeper understanding of CO-based oleogels and offers theoretical insights for their application in food products. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Packaged coconut water offers various options, from pure to those with added sugars and other additives. While the purity of coconut water is esteemed for its health benefits, its popularity also exposes it to potential adulteration and misrepresentation. To address this concern, our study combines Fourier transform infrared spectroscopy (FTIR) and machine learning techniques to detect potential adulterants in coconut water through classification models. The dataset comprises infrared spectra from coconut water samples spiked with 15 different types of potential sugar substitutes, including: sugars, artificial sweeteners, and sugar alcohols. The interaction of infrared light with molecular bonds generates unique molecular fingerprints, forming the basis of our analysis. Departing from previous research predominantly reliant on linear-based chemometrics for adulterant detection, our study explored linear, non-linear, and combined feature extraction models. By developing an interactive application utilizing principal component analysis (PCA) and t-distributed stochastic neighbor embedding (t-SNE), non-targeted sugar adulterant detection was streamlined through enhanced visualization and pattern recognition. Targeted analysis using ensemble learning random forest (RF) and deep learning 1-dimensional convolutional neural network (1D CNN) achieved higher classification accuracies (95% and 96%, respectively) compared to sparse partial least squares discriminant analysis (sPLS-DA) at 77% and support vector machine (SVM) at 88% on the same dataset. The CNN's demonstrated classification accuracy is complemented by exceptional efficiency through its ability to train and test on raw data., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

This study proposed a novel approach to automatically select the preprocessing methods and hyperparameters of machine learning (ML) algorithms based on their best performance in cross-validation for near-infrared (NIR) spectroscopy data. The proposed method simultaneously incorporates single or multiple-preprocessing steps and tunes hyperparameters to determine the best model performance for FT-NIR and Micro-NIR spectral data of coconut milk adulteration with distilled water and mature coconut water in the range of 0%-50%. Computational experiments were conducted using nine single preprocessing types, three types of ML classifier (linear discriminant analysis (LDA), k-nearest neighbour (KNN), multilayer perceptron (MLP)) and three types of ML regressor (partial least squares (PLS), KNN, MLP). The proposed performance strategy effectively addressed and produced satisfactory outcomes for classification and regression challenges in coconut milk adulteration. Finally, the results demonstrated that the proposed approach can more accurately determine the best model, particularly for NIR spectroscopy of coconut milk adulteration., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Coconut milk products are susceptible to bacterial damage, necessitating sterilization methods that often compromise nutrient and aroma integrity. This study investigates the effects of different thermal sterilisation methods on coconut milk aroma using headspace gas chromatography-ion mobility spectrometry (HS-GC-IMS) and headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS). We assessed the impact of pasteurisation (PAS, 70 °C, 25 min), high-temperature sterilisation (HTS, 121.1 °C, 15 min), and ultra-high temperature sterilisation (UHT, 130 °C, 5 s) through clustered heat maps and correlation analyses. Significant differences were observed (p < 0.05), with 37 and 52 substances detected by HS-GC-IMS and HS-SPME-GC-MS, respectively, identifying 12 key aroma compounds. UHT treatment primarily reduced 8 acids, maintaining a compositional structure and sensory profile similar to raw coconut milk. PAS and HTS treatments decreased the sensory intensity of overall coconut milk aroma, creamy, and floral notes, correlating with the presence of 2-heptanol, nonanal, 4-methylvaleric acid, and 2-tridecanone. These methods increased cooked notes, associated with 5-methyl-3-heptanone, 3-butyn-1-ol, hydroxyacetone, and acetoin. Rancidity was linked to acids such as isobutyric acid, isovaleric acid, and heptanoic acid, with high temperatures effectively reducing these compounds. Prolonged temperature changes in PAS and HTS accelerated lipid oxidative degradation and the Maillard reaction, involving free fatty acids in the formation of alcohols, aldehydes, esters, and lactones. These findings provide a theoretical basis for studying coconut milk flavour deterioration., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This work aimed to define strategies to increase the bioproduction of 6 pentyl-α-pyrone (bioaroma). As first strategy, fermentations were carried out in the solid state, with agro-industrial residues: Mauritia flexuosa Liliopsida. and Manihot esculenta Crantz in isolation, conducting them with different nutrient solutions having Trichoderma harzianum as a fermenting fungus. Physicochemical characterizations, centesimal composition, lignocellulosic and mineral content and antimicrobial activity were required. Fermentations were conducted under different humidification conditions (water, nutrient solution without additives and nutrient solutions with glucose or sucrose) for 9 days. Bioaroma was quantified by gas chromatography, assisted by solid-phase microextraction. The results showed the low production of this compound in fermentations conducted with sweet cassava (around 6 ppm (w/w)). The low bioproduction with sweet cassava residues can probably be related to its starch-rich composition, homogeneous substrate, and low concentration of nutrients. Already using buriti, the absence of aroma production was detected. Probably the presence of silicon and high lignin content in buriti minimized the fungal activity, making it difficult to obtain the aroma of interest. Given the characteristics presented by the waste, a new strategy was chosen: mixing waste in a 1:1 ratio. This fermentation resulted in the production of 156.24 ppm (w/w) of aroma using the nutrient solution added with glucose. This combination, therefore, promoted more favorable environment for the process, possibly due to the presence of fermentable sugars from sweet cassava and fatty acids from the buriti peel, thus proving the possibility of an increase of around 2500% in the bioproduction of coconut aroma., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Extraction of coconut paring oil (CPO) from processing by-products adds value to the product and reduces resource wastage. This study aims to assess the impact of 20 kHz, 20/80 kHz and 20/40/80 kHz of multi-frequency ultrasonic-assisted enzymatic extraction (MFUAEE) on the yield, physicochemical properties, fatty acid composition, total phenolic content, antioxidant activity, and emulsion stability of CPO derived from wet coconut parings (WCP). Results revealed that the CPO extraction yield with MFUAEE was 32.58 % - 43.31 % higher compared to AEE. The tri-frequency 20/40/80 kHz mode of multi-frequency ultrasound pretreatment exhibited the highest CPO extraction yield (70.08 %). The oil extracted through MFUAEE displayed similar fatty acid profiles to AEE, but had lower peroxide value, K 232 and K 270 values. Particularly, MFUAEE oil contained higher total phenolic content and exhibited potent DPPH free radical scavenging capacity. Results observed by SEM indicated that the pretreatment with multi-frequency ultrasound more efficiently disrupts the cellular structure of the WCP. Additionally, MFUAEE enhanced emulsion stability through the cavitation effect of ultrasound. These findings suggest that MFUAEE is a valuable approach for method for obtaining CPO with elevated extraction yield and superior quality, thereby enhancing the utilization of coconut by-products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

This study investigated the relationship between coconut maturity stages and the sugar, amino acid, and mineral profiles of coconut water (CW). Metabolite profiles were analysed using 1 H NMR, covering glucose (G), fructose (F), sucrose (S), reducing sugars (RS), total sugars (TS), amino acids, and organic acids. Mineral composition was measured using Microwave Plasma Atomic Emission Spectroscopy (MPAES). The results revealed distinct metabolite and mineral profiles across different maturity stages. Immature CW had high G/F and RS/TS ratios but low S/G ratios. Conversely, mature CW showed decreased G/F and RS/TS ratios but an increase in S/G. Mineral analysis revealed potassium as the predominant mineral in CW, peaking in the youngest stage and declining with maturity. Sodium, magnesium, and calcium showed a similar pattern, with higher concentrations in early than in later stages. The study identifies the age of 9-10 months as optimal stages for selecting tender coconut water., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The inclusion of by-product coconut mesocarp skins (CMS) in diets was evaluated in feedlot lambs. The objective of this study was to evaluate CMS levels effects on carcass traits and meat quality of lambs. Thirty-five male lambs with an initial body weight of 16.9 ± 2.93 kg were distributed in a completely randomized design with five CMS levels in total dry matter (0; 4.8; 9.6; 14.4 and 19.2%) and fed during 71 d until slaughter. High levels of CMS decreased the intake of dry matter and negatively affected the performance of lambs. Fat and protein contents of Longissimus lumborum muscle (P < 0.05) and the saturated fatty acid (FA) decreased (P < 0.001) whereas polyunsaturated FA increased (P < 0.01) with the inclusion of CMS. The ratio t10/t11-18:1 increased with the inclusion of CMS (P < 0.001). The instrumental color descriptors were unaffected by CMS levels. According to the effects on the investigated meat quality traits we recommend up to 4.8% CMS in diets of confined lambs., Competing Interests: Declaration of competing interest No potential conflict of interest was reported by the authors., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Desserts with vegetable ingredients are a constantly expanding global market due to the search for alternatives to cow's milk. Fermentation of these matrices by lactic acid bacteria can add greater functionality to the product, improving its nutritional, sensory, and food safety characteristics, as well as creating bioactive components with beneficial effects on health. Concern for health and well-being has aroused interest in byproducts of the industry that have functional properties for the body, such as mature coconut water, a normally discarded residue that is rich in nutrients. This study aimed to develop a probiotic gelatin based on pulp and water from mature coconuts and evaluate the physicochemical characteristics, viability of the Lacticaseibacillus rhamnosus LR32 strain in the medium, as well as the texture properties of the product., Methods: After collection and cleaning, the physicochemical characterization, mineral analysis, analysis of the total phenolic content and antioxidant activity of mature coconut water were carried out, as well as the centesimal composition of its pulp. Afterwards, the gelling was developed with the addition of modified corn starch, gelatin, sucrose, and probiotic culture, being subjected to acidity analysis, texture profile and cell count, on the first day and every 7 days during 21 days of storage, under refrigeration at 5 °C. An analysis of the centesimal composition was also carried out., Results: The main minerals in coconut water were potassium (1,932.57 mg L -1 ), sodium (19.57 mg L -1 ), magnesium (85.13 mg L -1 ) calcium (279.93 mg L -1 ) and phosphorus (11.17 mg L - 1 ), while the pulp had potassium (35.96 g kg -1 ), sodium (0.97 g kg -1 ), magnesium (2.18 g kg -1 ), 37 calcium (1.64 g kg -1 ), and phosphorus (3.32 g kg -1 ). The phenolic content of the water and pulp was 5.72 and 9.77 mg gallic acid equivalent (GAE) 100 g -1 , respectively, and the antioxidant capacity was 1.67 and 0.98 39 g of 2, 2-diphenyl-1-picrylhydrazyl (DPPH) mg -1 , respectively. The coconut pulp had 2.81 g 100 g -1 of protein, 1.11 g 100 g -1 of 40 ash, 53% moisture, and 5.81 g 100 g -1 of carbohydrates. The gelatin produced during the storage period presented firmness parameters ranging from 145.82 to 206.81 grams-force (gf), adhesiveness from 692.85 to 1,028.63 gf sec, cohesiveness from 0.604 to 0.473, elasticity from 0.901 to 0.881, gumminess from 86.27 to 97.87 gf, and chewiness from 77.72 to 91.98 gf. Regarding the viability of the probiotic microorganism, the dessert had 7.49 log CFU g -1 that remained viable during the 21-day storage, reaching 8.51 CFU g -1 . Acidity ranged from 0.15 to 0.64 g of lactic acid 100 g -1 . The centesimal composition of the product showed 4.88 g 100 g -1 of protein, 0.54 g 100 g -1 of ash, 85.21% moisture, and 5.37g 100 g -1 of carbohydrates. The development of the gelatin made it possible to obtain a differentiated product, contributing to diversification in the food sector, providing a viable alternative for maintaining consumer health and reducing costs compared to desserts already available on the market., Competing Interests: The authors declare that they have no competing interests., (© 2024 Patricio Rocha et al.)

In this paper, the effect of monosodium glutamate (MSG) on coconut protein (CP) solubility, surface hydrophobicity, emulsification activity, ultraviolet spectroscopy and fluorescence spectroscopy was investigated. Meanwhile, the changes in the in vitro digestive properties of coconut milk were also further analyzed. MSG treatment altered the solubility and surface hydrophobicity of CP, thereby improving protein digestibility. Molecular docking showed that CP bound to pepsin and trypsin mainly through hydrogen bonds and salt bridges. And MSG increased the cleavable sites of pepsin and trypsin on CP, thus further improving the protein digestibility. In addition, MSG increased the Na + concentration in coconut milk, promoted flocculation and aggregation between coconut milk droplets, which prevented the binding of lipase and oil droplets and inhibited lipid digestion. These findings may provide new ideas and insights to improve the digestive properties of plant-based milk., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Coconut (Cocos nucifera) leaves, an unutilized resource, enriched with valuable bioactive compounds. Spectral analysis of purified pentane fraction of coconut leaves revealed the presence of a squalene analog named 4,4'-diapophytofluene or in short 4,4'-DPE (C 30 H 46 ). Pure squalene standard (PSQ) showed cytotoxicity after 8 µg/ml concentration whereas 4,4'-DPE exhibited no cytotoxic effects up to 16 µg/ml concentration. On senescence-induced WI38 cells, 4,4'-DPE displayed better percentage of cell viability (164.5% at 24 h, 159.4% at 48 h and 148% at 72 h) compared to PSQ and BSQ (bio-source squalene) with same time duration. Similar trend of result was found in HaCaT cells. SA-β-gal assay showed that number of β-galactosidase positive cells were significantly decreased in senescent cells (WI38 and HaCaT) after treated with 4,4'-DPE than PSQ, BSQ. Percentage of ROS was increased to 60% in WI38 cells after olaparib treatment. When PSQ, BSQ and 4,4'-DPE were applied separately on these oxidative-stress-induced cells for 48 h, the overall percentage of ROS was decreased to 39.3%, 45.6% and 19.3% respectively. This 4,4'-DPE was found to be more effective in inhibiting senescence by removing ROS as compared to squalene. Therefore, this 4,4'-DPE would be new potent senotherapeutic agent for pharmaceuticals and dermatological products., (© 2024. The Author(s).)

The aim of this study was to compare the quality of plain yogurt made from cow milk (n = 10) and its plant-based analog made from coconut flesh extract (n = 14). Coconut yogurt alternatives were divided into 2 experimental groups based on differences in their color, which were noted after the packages had been opened. The first group included products with a typical white color (n = 8), and the second group comprised products with a grayish pink color (n = 6) that developed as a result of oxidative processes. In comparison with its plant-based analog, plain yogurt was characterized by higher values of lightness (L*), yellowness (b*) and chroma (C*), higher titratable acidity, a higher content of retinol and α-tocopherol, higher nutritional value of fat, and lower values of water-holding capacity (WHC) and redness (a*). Plain yogurt had lower volatile acidity than its plant-based analog with a grayish pink color. A comparison of yogurt analogs with different colors revealed that the product with a grayish pink color was characterized by a lower value of L*, and higher values of a*, b*, C*, and pH. An analysis of its fatty acid profile demonstrated that it also had a higher proportion of C14:0 and C18:1 cis-9; higher total monounsaturated fatty acids content; a lower proportion of C10:0, C12:0, and C18:2; a lower total content of polyunsaturated fatty acids (PUFA) and essential fatty acids; and a lower ratio of PUFA to saturated fatty acids. The yogurt analog with a grayish pink color had a lower total content of tocopherol isoforms than the remaining products. The yogurt analog with a white color had the highest WHC and γ-tocopherol content. Consumers should be aware of the fact that coconut yogurt alternatives may have nonstandard quality attributes. The differences between such products and yogurt made from cow milk should be explicitly communicated to consumers so that they could make informed purchasing decisions., (The Authors. Published by Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).)

Lead is one of the primary pollutants found in water and poses significant toxicity risks to humans; thus, it is necessary to investigate techniques for removing it economically and efficiently. In order to enhance the removal capacity of Pb 2+ , coconut shell-based activated carbon (AC) was modified with introducing oxygen-containing functional groups (OFGs) via nitric acid (HNO 3 ) or hydrogen peroxide (H 2 O 2 ) modification in this study. The characterization results show that after oxidation treatment, the content of OFGs increased, and the textural properties of the samples do not change significantly. This indicates that the modification conditions used in this study effectively introduced OFGs while avoiding the adverse effects on physical adsorption ability of AC caused by oxidation treatment. The Pb 2+ adsorption capacities of the AC modified with 10 M HNO 3 and 30 wt.% H 2 O 2 were 4.26 and 3.64 times that of the pristine AC, respectively. The experimental data can be well fitted using the Langmuir isotherm model and the Elovich kinetic model, suggesting that the adsorption of Pb 2+ on AC belongs to single-layer adsorption, and chemical adsorption dominates the adsorption process. In summary, the hydrothermal-assisted HNO 3 /H 2 O 2 -modified coconut shell-based AC shows great potential in efficiently removing Pb 2+ from solutions, offering a solution for utilizing coconut shell waste., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Carbon dots (CDs) derived from sustainable natural feed-stocks like lignin have gained wide acceptance by virtue of their renewability and promising potential in intelligent sensing applications. The precursor lignin is isolated from agro-biomass waste, coconut husk through sodium hydroxide based extraction process. CDs are synthesised from amine functionalized lignin through solvothermal process and integrated into carrageenan biopolymer matrix (1, 2 and 3 wt%). The composite film with 2 wt% CDs (CARR2CD) showed optimum fluorescent emission intensity, excellent pH dependent fluorescent color change in the food pH range, reasonable tensile strength (46.50 ± 1.32 MPa) and 27 % increase in elongation at break. CDs imparted UV-light blocking properties (70 % UV-light) and enhanced hydrophobicity of the carrageenan matrix. CARR2CD film showed 84 % visible light transparency, 79 % reduction in oxygen transmittance rate (OTR), 81 % reduction in CO 2 gas permeability and excellent antioxidant and antibacterial properties (against E. coli and S. aureus). As a practical application, the developed responsive packaging material is used to track pH change associated with milk spoilage via noticeable color change in fluorescent emission of the composite film. Thus, the developed responsive composite film paves a way for use as green and sustainable transparent intelligent food packaging material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Anaemia is a widespread health issue affecting young children and pregnant women, characterized by reduced red blood cells or haemoglobin levels. Coconut water, rich in nutrients such as L-arginine, iron, vitamin C, vitamin B6, folic acid and fatty acids, is believed to aid in blood formation (hematopoesis). The study aimed to examine the impact of coconut water on hematological indices and lipid profiles in rats with phenylhydrazine-induced anemia. 30 rats were divided into 5 groups: a normal control, phenylhydrazine untreated, coconut water (0.5ml/kg), iron, and ferrous treated groups. Hemoglobin, hematocrit, and erythrocyte levels were measured using a Hematology Analyzer. Results showed a significant decrease in LDL and TG levels, and an increase in HDL levels in phenylhydrazine induced anemia compared to the control group. Coconut water administration at 0.5ml/kg reduced LDL, VLDL and TG levels, and increased HDL levels in rats with induced anemia. The study found that coconut water had a positive effect on hematological indices, as it increased hemoglobin and erythrocyte levels in rats with induced anemia. These findings suggest that coconut water may have potential therapeutic benefits for individuals with anemia, particularly in lowering lipid levels and improving blood formation. However, further research is needed to fully understand the mechanisms underlying these effects and to determine the most effective dosage and duration of treatment. Overall, the study highlights the importance of coconut water as a potentially beneficial alternative treatment for anemia.

Rust powder collected from an archeological iron was evaluated by complementary analyses such as FTIR, XRD, XRF, and SEM/EDX. The analyses revealed that lepidocrocite (L) was the major component in the archeological iron. Coconut husk (CH) can be classified as a type of lignocellulosic biomass of renewable resources that are widely available, especially in coastal areas. In this research, the isolated lignin extracted from CH is being studied as a potential alternative for environmentally friendly applications. The isolated lignin from soda and organosolv pulping went through several analyses such as FTIR, NMR ( 13 C and 2D-HSQC), and TGA analyses. The analyses showed that lignin isolated via soda pulping has superior antioxidant capabilities due to its greater phenolic-OH content compared to lignin isolated from organosolv pulping. The effects of lignin concentrations, pH, and reaction time were utilized in rust conversion studies of an archeological iron. 5 wt% of soda lignin (SL) was revealed as the ideal condition in this rust conversion study with a value of 84.21 %. The treated rust powder with 5 wt% of SL was then further gone through several complementary analyses, which revealed that the treated rust had nearly transformed into an amorphous state., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The aim of this work was to evaluate the adsorptive performance of the phosphorylated coconut fiber lignin (PCFL) obtained through an innovative biorefinery process for removing methylene blue (MB). PCFL was obtained using coconut fiber mixed with 85 % wt. H3PO4 at 70 °C for 1 h. Milled wood lignin (MWL) and PCFL were characterized by FTIR, CP-MAS 31 P NMR, phosphorous and hydroxyl contents, pH PZC , and BET analyses. The batch adsorption tests evaluated the effects of the biosorbent (0.25 - 4 g L -1 ) and adsorbate dosages (2.5 - 7.5 mg L -1 ), contact time (0 - 60 min), pH (4 - 8), ionic strength (0.001 - 0.1 mol L -1 ) and temperature (298.15 - 318.15 K) on MB adsorption. Kinetic, equilibrium, and thermodynamic modeling were used. The phosphorous content on PCFL was 2.5 times higher than that of MWL. PCFL presented an enhanced adsorptive performance for removing MB, which was spontaneous (ΔG 0  < 0), endothermic (ΔH 0  > 0), with affinity between the biosorbent and adsorbate (ΔS 0  > 0), and driven by physisorption (E a  > 40 kJ mol -1 ). The adsorptive performance of PCFL was enhanced due to the grafting of new active sites by using an innovative biorefinery process, showing its potential to be used for textile effluent remediation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this study, monosodium glutamate (MSG) was used to improve the viscosity of coconut milk and the underlying mechanism was explored by investigating the changes in structures of coconut milk protein and physicochemical properties of coconut milk. Firstly, the effect of MSG on the properties of coconut milk was studied. The results showed that MSG increased the pH and zeta potential, reduced the particle size, thus enhancing the droplet interaction and increasing the viscosity of coconut milk. Subsequently, the effects of MSG on the structure and properties of coconut proteins (CP) were investigated. FTIR spectroscopy and circular dichroism spectroscopy showed that MSG was able to change the secondary structure of CP. The results of SDS-PAGE showed that MSG was able to bind to CP to form a larger molecular weight protein, thus improving the viscosity of coconut milk. Moreover, MSG was also able to increase the water-binding capacity of CP. In addition, molecular docking and driving force analysis revealed that hydrogen bonds, electrostatic forces, disulfide bonds, and hydrophobic interactions are the main interactions between MSG and CP. Studying the effect of MSG on the viscosity of coconut milk provides theoretical support to improve the viscosity of other plant protein emulsions., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2023. Published by Elsevier B.V.)

Lipases comprise the third most commercialized group of enzymes worldwide and those of microbial origin are sought for their multiple advantages. Agro-industrial waste can be an alternative culture medium for producing lipases, reducing production costs and the improper disposal of waste frying oil (WFO). This study aimed to produce yeast lipases through submerged fermentation (SF) using domestic edible oil waste as inducer and alternative culture medium. The optimal culture conditions, most effective inducer, and purification method for a new lipase from Moesziomyces aphidis BRT57 were identified. Yeast was cultured in medium containing green coconut pulp and WFO waste for 72 h. The maximum production of lipases in SF occurred in a culture medium containing WFO and yeast extract at 48 and 72 h of incubation, with enzyme activities of 8.88 and 11.39 U mL -1 , respectively. The lipase was isolated through ultrafiltration followed by size exclusion chromatography, achieving a 50.46 % recovery rate. To the best of our knowledge, this is the first study to report the production and purification of lipases from M. aphidis, demonstrating the value of frying oil as inducer and alternative medium for SF, contributing to the production of fatty acids for biodiesel from food waste., (Copyright © 2024 Elsevier Inc. All rights reserved.)

For several decades, water pollution has become a major threat to aquatic and non-aquatic species, including humans. Different treatment techniques have already been proposed and implemented depending on wastewater characteristics. But many of these treatment techniques are expensive and inefficient. Adsorption-based techniques have shown impressive performances as an inexpensive treatment method previously. Coconut-based resources have been considered as adsorbents for wastewater treatment because of their abundance, low cost, and favorable surface properties. However, over the last decade, no comprehensive study has been published regarding biochar from coconut-based materials for wastewater treatment and CO 2 capture. This review discusses biochar production technology for coconut-based materials, its modification and characterization, its utilization as an adsorbent for removing metals and organics from wastewater, and the associated removal mechanisms and the economic aspects of coconut-based biochar. Coconut-based materials are cheap and effective for removing various organic compounds such as pesticides, hormones, phenol, and phenolic compounds from solutions and capturing CO 2 from air mainly through the pore-filling mechanism. Utilizing coconut-based biochars in a hybrid system that combines adsorption and other techniques, such as biotechnology or chemical coagulation is a promising way to increase their performance as an adsorbent in wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The coconut ( Cocos nucifera L.) is a commercial crop widely distributed among coastal tropical regions. It provides millions of farmers with food, fuel, cosmetics, folk medicine, and building materials. Among these, oil and palm sugar are representative extracts. However, this unique living species of Cocos has only been preliminarily studied at molecular levels. Benefiting from the genomic sequence data published in 2017 and 2021, we investigated the transfer RNA (tRNA) modifications and modifying enzymes of the coconut in this survey. An extraction method for the tRNA pool from coconut flesh was built. In total, 33 species of modified nucleosides and 66 homologous genes of modifying enzymes were confirmed using a nucleoside analysis using high-performance liquid chromatography combined with high-resolution mass spectrometry (HPLC-HRMS) and homologous protein sequence alignment. The positions of tRNA modifications, including pseudouridines, were preliminarily mapped using a oligonucleotide analysis, and the features of their modifying enzymes were summarized. Interestingly, we found that the gene encoding the modifying enzyme of 2'-O-ribosyladenosine at the 64th position of tRNA (Ar(p)64) was uniquely overexpressed under high-salinity stress. In contrast, most other tRNA-modifying enzymes were downregulated with mining transcriptomic sequencing data. According to previous physiological studies of Ar(p)64, the coconut appears to enhance the quality control of the translation process when subjected to high-salinity stress. We hope this survey can help advance research on tRNA modification and scientific studies of the coconut, as well as thinking of the safety and nutritional value of naturally modified nucleosides.

Background: Cocos nucifera (L.) is an important plantation crop with immense but untapped nutraceutical potential. Despite its bioactive potential, the biochemical features of testa oils of various coconut genotypes are poorly understood. Hence, in this study, the physicochemical characteristics of testa oils extracted from six coconut genotypes - namely West Coast Tall (WCT), Federated Malay States Tall (FMST), Chowghat Orange Dwarf (COD), Malayan Yellow Dwarf (MYD), and two Dwarf × Dwarf (D × D hybrids) viz., Cameroon Red Dwarf (CRD) × Ganga Bondam Green Dwarf (GBGD) and MYD × Chowghat Green Dwarf (CGD) - were analyzed., Results: The proportion of testa in the nuts (fruits) (1.29-3.42%), the proportion of oil in the testa (40.97-50.56%), and biochemical components in testa oils - namely proxidant elements Fe (34.17-62.48 ppm) and Cu (1.63-2.77 ppm), and the total phenolic content (6.84-8.67 mg GAE/100 g), and phytosterol content (54.66-137.73 mg CE/100 g) varied depending on the coconut genotypes. The saturated fatty acid content of testa oils (67.75 to 78.78%) was lower in comparison with that of coconut kernel oils. Similarly, the lauric acid (26.66-32.04%), myristic (18.31-19.60%), and palmitic acid (13.43-15.71%,) content of testa oils varied significantly in comparison with the coconut kernel oils (32-51%, 17-21% and 6.9-14%, respectively). Liquid chromatography-mass spectrometry (LC-MS) analysis revealed the presence of 18 phenolic acids in coconut testa oil. Multivariate analysis revealed the biochemical attributes that defined the principal components loadings. Hierarchical clustering analysis of the genotypes showed two distinct clusters., Conclusion: This study reveals the genotypic variations in the nutritionally important biochemical components of coconut testa oils. The relatively high concentration of polyunsaturated fatty acids (PUFA) and polyphenol content in testa oils warrant further investigation to explore their nutraceutical potential. © 2022 Society of Chemical Industry., (© 2022 Society of Chemical Industry.)

The search for renewable adsorbent materials has increased continuously, being the agro-wastes an interesting alternative. This work aimed to elucidate the mechanism of adsorption of Rhodamine B on crude and modified coconut fibers from aqueous systems and the feasibility of reusing the biosorbents. The chemical modification of crude coconut fiber was carried out by the organosolv process. The biosorbents were characterized by lignocellulosic composition, FTIR, TGA, WCA, SEM, nitrogen adsorption/desorption (BET-BJH), and pH of zero point of charge (pH PZC ) analyses . The batch adsorption tests evaluated the effects of the adsorbent and adsorbate dosages, contact time, and temperature on Rhodamine B adsorption. For elucidating the adsorption mechanisms involved in the process, the non-linear forms of kinetic and isotherm models were used. The regeneration of the biosorbents was evaluated by carrying out the desorption experiments. Modified coconut fiber had an increase in the amount of α-cellulose, which influenced its structural, morphological, surface, and porous properties. The removal efficiency of Rhodamine B was about 90% for modified coconut fiber and 36% for crude coconut fiber. The dye adsorption was spontaneous and endothermic for both biosorbents, showing higher spontaneity and affinity with the adsorbate for biosorbent modified. Therefore, the coconut fiber can be considered an alternative to the traditional adsorbent materials that allows the reuse by four times without performance loss, in which its adsorptive capacity has increased through its chemical modification by a biorefinery process., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

A better understanding of different retention mechanisms of potentially toxic elements (PTEs) by biochars during the remediation of contaminated sites is critically needed. In this study, different spectroscopic techniques including synchrotron-based micro-X-ray fluorescence (μ-XRF), X-ray absorption fine structure (XAFS), and near-edge XAFS spectroscopy (NEXAFS), were used to investigate the spatial distributions and retention mechanisms of lead (Pb) and copper (Cu) on phytolith-rich coconut-fiber biochar (CFB), and ammonia, nitric acid and hydrogen peroxide modified CFB (MCFB) (i.e., ACFB, NCFB and HCFB). The μ-XRF analyses indicated that sorption sites on ACFB and NCFB were more efficient compared to those on CFB and HCFB to bind Pb/Cu. XAFS analyses revealed that the percentage of Pb species as Pb(C 2 H 3 O 2 ) 2 increased from 22.2% (Pb-loaded CFBs) to 47.4% and 41.9% on Pb-loaded NCFBs and HCFBs, while the percentage of Cu(OH) 2 and Cu(C 2 H 3 O 2 ) 2 increased from 5.8% to 32.8% (Cu-loaded CFBs) to 41.5% and 43.4% (Cu-loaded NCFBs), and 27.1% and 35.1% (Cu-loaded HCFBs), respectively. Due to their similar atomic structures of Pb/Cu, Pb(C 2 H 3 O 2 ) 2 /Pb-loaded montmorillonite and Cu(C 2 H 3 O 2 ) 2 /Cu(OH) 2 were identified as the predominant Pb/Cu species observed in Pb- and Cu-loaded MCFBs. The NEXAFS analyses of carbon confirmed that increasing amounts of carboxylic groups were formed on HCFB and NCFB by oxidizing carbon-containing functional groups, which could provide additional active binding sites for Pb/Cu retention. Results from the X-ray photoelectron spectroscopy analyses of nitrogen showed that azido-groups of ACFB played major roles in Pb/Cu retention, while amide-groups and pyridine-groups of NCFB primarily participated in Pb/Cu retention. Overall, density functional theory calculations suggested that silicate and the synergistic effect of hydroxyl and carboxylic-groups on MCFBs were highly efficient in Pb retention, while azido-groups and/or carboxylic-groups played major roles in Cu retention. These results provide novel insights into the PTE retention mechanisms of MCFBs., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The disposal of coconut wastes is costly and damaging to the environment, but its uses are advantageous activated carbons production. Coconut leaves waste were used for activated carbon production by pyrolysis at 500° C and activation with potassium carbonate. The activated carbon was used for caffeine removal from aqueous solution. The coconut leaves activated carbon showed a predominantly amorphous structure from X-ray diffraction analysis and a pH at the zero charge point of 7.9. From the N 2 adsorption/desorption method, the adsorbent showed a predominance of mesopores, with average pore size of 45.48 ηm and a surface area of 678.03 m 2 /g. From kinetic studies the data followed the pseudo-second order, where the intraparticle diffusion can be neglected. The adsorption isotherms were satisfactorily adjusted for the Redlich-Peterson model and a type curve L was identified. The thermodynamic parameters showed that adsorption occurred spontaneously, was exothermic and governed by physical adsorption. The artificial neural networks developed were capable of predicting both kinetics and equilibrium adsorption data under different operating conditions and was comparable to the traditional models available in literature in the training experiments, encouraging its use for data generalization when an efficient dataset is used. In conclusion, coconut leaves waste showed to be a promising feedstock to produce activated carbon aiming caffeine removal from water and wastewater., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Fortification of rolls, one of the most popular snacks for children and adults, with coconut by-products can be interesting in terms of both nutritional enrichment and reduction of food waste. Coconut by-products, such as residues from coconut milk (RCM) and coconut oil (RCO) extraction, are a valuable source of dietary fiber. In the study, coconut flours obtained from RCM and RCO were used (FCM and FCO, respectively) for supplementation of rolls; white wheat flour was replaced with FCM or FCO at levels of 6, 12, and 18 g per 100 g., Results: The effect of the addition of the coconut by-products on the nutritional value, sensory evaluation, physical properties, and texture of rolls was determined after 24 and 72 h of storage. The research showed a positive effect of FCM and FCO on the roll yield, crumb moisture, and baking loss. The sensory evaluation revealed that the 12% addition of coconut residues yielded products with high overall acceptability (8 points on a 9-point scale). Compared with the control, a 12% addition of FCO or FCM contributed to an increase in proteins of 7.9% and 3.9% respectively and an increase in dietary fiber of 76% and 57% respectively. Despite the increase in the fat and protein contents, the energy value of the coconut rolls was significantly lower (244.6 kcal and 245.3 kcal for FCO and FCM respectively) than in the control wheat rolls (266.0 kcal)., Conclusion: White rolls with coconut flours obtained after grinding residues from oil or coconut milk extraction significantly increased the nutritional value of the rolls. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

Coconut palm tree ( Cocos nucifera L .) tissues were used as a readily available, low-cost and green adsorbent to desalinate seawater. The tree bark (CB), husk (CH), leaves (CL) and roots (CR) were examined in their fresh (F) and dry (D) forms. The salinity removal (adsorption) efficiency followed the trend: F&#95;CB ≈ F&#95;CR > F&#95;CL > D&#95;CR > F&#95;CL > D&#95;CR. The sorbents from the coastal region desalinated more efficiently than those from a non-coastal region. Also, the fresh tissues were more effective and efficient than the dry parts. The salinity retention ability (desalination : desorption) follows the trend: F&#95;CR (22.2) > F&#95;CB (19.0) ≫ D&#95;CR (12.3) > D&#95;CB (11.0) > D&#95;CL (6.14) ≈ F&#95;CL (6.10) > F&#95;CH (4.3) > D&#95;CH (2.1). Moreover, the desalination fitted the pseudo-second-order kinetics than the pseudo-first-order, suggesting the predominance of chemisorption over physical removal. Overall, water pH, conductivity, total dissolved solids and dissolved oxygen (DO) correlated positively and strongly with desalination. By contrast, the density and redox potential correlated negatively, whereas temperature and DO showed no definite influence. Conclusively, F&#95;CR and F&#95;CB are the most suitable coconut palm tree tissues for desalination. Future studies should include chemical characterization of the tissues and system optimization for upscaling. This article is part of the theme issue 'Developing resilient energy systems'.

Nonalcoholic Palm Nectar from Cocos nucifera (NPNC), a bio-refresher obtained from the juvenile inflorescence of coconut palm; is prominent as a nutritional health drink. The aim of this study was to investigate the nutritional and medicinal properties of NPNC and its products; sugar (NPNCS) and honey (NPNCH). The collected samples were subjected to physicochemical evaluations such as pH, Titrable Acidity, Total Soluble Solids, and Ash value, using standard techniques. The analysis revealed the suitability of NPNC as a natural health drink over conventionally available beverage. The elemental compositions of the samples were determined by using Inductive Coupled Plasma-Atomic Emission Spectrometry and demonstrated that NPNCH is enriched with iron and NPNCS with calcium. Vitamin C present in the samples was determined by using 2,6-Dichlorophenol indophenol redox titration method. Hydrolysable polyphenols, tannins, and flavonoids are determined by Folin-Ciocalteu, by Folin-Denis's technique and by aluminium chloride colorimetric methods, respectively. In NPNC, the dominance of Vitamin C as antioxidant is observed. Diuretic activity of samples was determined by Lipschitz method, and the results revealed that NPNC exhibited significant diuretic activity, comparable with furosemide. Immunomodulatory activities of the samples were evaluated by using indirect hemagglutination test and by using delayed type hypersensitivity (DTH) response. NPNC, NPNCS, and NPNCH exhibited stimulatory effect on humoral and cell-mediated immunity, which is comparable with that of standard immunomodulator levamizole. Subacute toxicity studies of selected samples were done in Wistar rats and the results proved the boicompatibility of the samples without systemic toxic effects. PRACTICAL APPLICATIONS: The use of commercially available carbonated beverages and energy drinks in young adults are associated with negative health outcomes with increased incidence of diabetes, sleep disturbances, and dental problems. Even though, such complications are there, the energy drink industries have grown dramatically accounting for major percentage of market sale. Researchers are in search for natural health drinks with some medicinal value to avoid the negative impact on consumers' health. Nonalcoholic Palm Nectar from Cocos nucifera (NPNC) is considered as zero alcoholic natural health drink. The focus of this study is to reveal the potential medicinal properties of NPNC and its products; honey (NPNCH) and sugar (NPNCS). If the nutritional and medicinal values of the selected preparations from natural sources can be proved with scientific evidence, its ability to beat commercially available carbonated beverages and energy drinks with negative health consequences may get widespread acceptance., (© 2021 Wiley Periodicals LLC.)

Nanocellulose derived from microorganism is crucial bio-based products due to its unique physicochemical and mechanical properties for material science. Thus, optimizing bacterial cellulose (BNC) production is essential to widen applications and reduce production cost. Using various carbon sources derive from fruits as alternatives for synthesizing BNC could produce a low-cost BNC with comparable properties. Although Komagataeibacter xylinus grown in different natural juices, including clarified juice (CJ), sugarcane juice (SC) and coconut juice (CN) demonstrated a lower yield than that of control medium (HS), FTIR confirmed no change in chemical functional groups of BNCs. Similarly, different sugar sources have slightly effects on mechanical and thermal properties of BNC. However, the internal morphology illustrated the pore structure in oval shape for HS and CN while CJ and SC resulted in irregular pores which could lead to the highest crystallinity index value for BNC from HS compared to that from alternative media., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Objective: To determine the anti-cataract effects of coconut water (CW) in vivo and in vitro, and to explore the potential pathogenic mechanism., Methods: In this study, 48 male Sprague-Dawley rats were randomly divided into 4 groups: control (CO), diabetic (DM), diabetic treated with CW (DM + CW), and diabetic treated with Glibenclamide (DM + Gli). Except for the CO group, in the other three groups, intraperitoneal injection of STZ (60 mg/kg) was conducted to establish diabetic models. The experiment was conducted for 20 weeks. The slit-lamp examination was undertaken during the period of experiment (20 weeks), and then, all rats were sacrificed. The levels of superoxide dismutase (SOD), malondialdehyde (MDA), and glutathione peroxidase (GSH-Px) in the left lens were measured by using biochemical assays. The right lens was used for pathological analysis. The rat lens epithelial cells (LECs) were cultured in vitro and the subcultured cell were divided into four groups, namely the normal glucose group (5 mmol /L glucose, Group I), the high glucose group (40 mmol/L glucose, Group II), high glucose +5% CW group (Group III), and high glucose +10% CW group (Group IV). LECs were cultured under the conditions as described above for 48 h. Cell proliferation and the morphological changes were observed with interted phase contrast microscope.The level of cell apoptosis was determined by flow cytometry. the level of SOD, MDA and GSH-Px were also detected., Results: The lens opacity index decreased in diabetic rats, and LECs apoptosis ratio also decreased in high glucose environments that received CW. Under treatment with CW, reduced MDA level and elevated activities of SOD and GSH-Px were detected, both in vivo and in vitro experiments. The increased severity of cataract and LECs apoptosis were noted in diabetic rats that received normal water, while CW markedly mitigated the enhanced cataract severity and the reduction of LECs induced by diabetes mellitus., Conclusion: CW is a functional food that can protect the lens from diabetic cataract. The possible underlying mechanism may be partly explained via the decreased oxidative stress in lens. However, further research needs to be conducted to indicate the pathogenic mechanism of anti-diabetic effects of CW., (Copyright © 2021 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

A method was validated for determining tebuconazole residues in coconut water, kernel and leaves using Liquid chromatography-Mass spectrometry/Mass spectrometry (LC-MS/MS) with electro spray ionization in positive ion mode. Samples were extracted with acetonitrile and subsequent clean-up was done using dispersive solid phase extraction. Recovery ranged between 70 and 114.39 % and the RSD was between 0.64 and 10.24 %. Root feeding studies with tebuconazole @ 5 and 10 mL/100 mL of water/tree revealed the presence of tebuconazole residues in coconut leaves until three days after treatment but dissipated to below quantifiable limit on 5th day at single dose while the residues went below quantifiable limit after 10 days at double the dose. Residues were below quantifiable limit in coconut water and kernel until three days. Data obtained from the study were used for estimating the risks associated with the exposures to tebuconazole residues in coconut., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR), in combination with chemometrics, was explored as a rapid method of detecting sugar adulteration in coconut water. In a simulated experiment, coconut water was substituted with binary sugars, mixed sugars, and high fructose corn syrup and discriminated using the fingerprint infrared band region between 1200 and 950 cm -1 . Principal component analysis (PCA) performed on data pre-processed by the Savitzky-Golay smoothing and gap-segment derivative, revealed data clusters discernible by the type and level of substituted sugars, enabling visual diagnosis of the similarity and anomalous features in the dataset. Statistical performance metrics following a cross-validated partial least square (PLS) regression indicated the prediction of adulterant sugars at single-digit percent substitutions. A parallel exploratory analysis of 31 different commercial coconut water samples showed a distinct PCA clustering for samples bearing the label "added sugar", suggesting the potential use of the methods to screening samples for undeclared sugar additions., (Copyright © 2021. Published by Elsevier Ltd.)

Virgin coconut oil is a useful substance in our daily life. It contains a high percentage of lauric acid which has many health benefits. The current industry has developed several methods to extract the oil out from the coconut fruit. This review paper aims to highlight several common extraction processes used in modern industries that includes cold extraction, hot extraction, low-pressure extraction, chilling, freezing and thawing method, fermentation, centrifugation, enzymatic extraction and supercritical fluid carbon dioxide. Different extraction methods will produce coconut oil with different yields and purities of lauric acid, thus having different uses and applications. Challenges that are faced by the industries in extracting the coconut oil using different methods of extraction are important to be explored so that advancement in the oil extraction technology can be done for efficient downstream processing. This study is vital as it provides insights that could enhance the production of coconut oil., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

An active antioxidant film was fabricated by using polyvinyl alcohol (PVA) and corn starch (ST) and incorporated with and 3, 5, 10, and 20% (v/v) coconut shell extract (CSE) and sepiolite clay (SP) for the first time. The microstructure and physical properties of prepared films were characterized and examined. The addition of sepiolite clay to PVA improved the elongation break 15.57 to 69.24%, and water vapor permeability increased with the addition of CSE. In addition to CSE to films, the antioxidant activity properties of the films were enhanced up to 80%. Further, increasing the amount of CSE slightly affected the color of the active films. The thermal properties of films were enhanced with the addition of CSE and SP. The dispersion of SP in the PVA matrix was affected by an increase in CSE concentration in the PVA matrix. Remarkably, PVA-ST film-based sachets successfully improved the oxidative stability of packaged soybean oil. Our results suggest PVA-ST film containing CSE and sepiolite clay can be utilized as a novel antioxidant packaging material in the food processing industry., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Background: Acrylamide in foods has been widely studied because of its possible carcinogenicity. Most of the foods investigated were prepared using low moisture and high temperature conditions. Non-centrifugal sugars (NCSs), which have been promoted as 'non-chemical' natural sweeteners, contain precursors of acrylamide and their production processes involved prolonged heating. The acrylamide content in 32 commercial NCSs from coconut, cane and palmyra palm purchased in Asian countries was investigated. Additionally, syrups (80  o Brix) produced from coconut and palmyra raw saps and cane juice were prepared by evaporation with prolonged heating (2.5 h to reach 100 °C, 1 h to increase to 110 °C, held at 110 °C for 30 min). The compositions and contents of sugars, amino acids and minerals, as well as the physical characteristics of the raw saps, juice and syrups, were determined., Results: The acrylamide content of these 32 products ranged from < 15 to 4011 μg kg -1 . The raw saps and juice were mildly acidic (pH 5.14-5.66) and similar values were observed for their syrups (4.73-5.73). The contents of sucrose, fructose and glucose in the saps and juice from these plants were similar, whereas their compositions varied with respect to amino acids. The variation of the ornithine content was significant, demonstrating a striking influence on the extent of acrylamide formation (867-1564 μg kg -1 ) in the syrups prepared from these materials., Conclusion: The present study emphasizes the importance of a careful monitoring and control of the critical steps invloved in the manufacturing process of NCSs (particularly the evaporation phase), aiming to protect the health and safety of consumers. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

Wheat bread, produced by the single-phase method, is a common food consumed all over the world. Due to changes in lifestyle and nutritional trends, alternative raw materials are sought to increase the nutritional value and improve the taste of daily consumed products. Additionally, customers seek a wide variety of foods, especially when it comes to basic foods. Nuts, such as coconuts or chestnuts, might provide an attractive flavour with benefits to the nutritional quality. In this study, the effect of substituting wheat flour with coconut or chestnut flour (flour contribution level: 5, 10, 15, 30, 50% w / w ), was evaluated in terms of the breads specific volume, texture, colour, nutritional composition, and dietary fibre fraction contents. Moreover, a sensory evaluation was conducted to assess potential consumer acceptance. Based on the consumer's perception, the overall acceptance of bread with 15% w / w of coconut and chestnut flour was in privilege compared to the control sample. As a result, taking all of the tested parameters into account, the breads with 5, 10, and 15% supplementation of chestnut or coconut flour were still of good quality compared to the wheat bread and their fibre content was significantly higher.

The purpose of this study was to look into the effects of green coconut mesocarp juice extract (CMJE) on diabetes-related problems in streptozotocin- (STZ-) induced type 2 diabetes, as well as the antioxidative functions of its natural compounds in regulating the associated genes and biochemical markers. CMJE's antioxidative properties were evaluated by the standard antioxidant assays of 1,1-diphenyl-2-picrylhydrazyl (DPPH), superoxide radical, nitric oxide, and ferrous ions along with the total phenolic and flavonoids content. The α -amylase inhibitory effect was measured by an established method. The antidiabetic effect of CMJE was assayed by fructose-fed STZ-induced diabetic models in albino rats. The obtained results were verified by bioinformatics-based network pharmacological tools: STITCH, STRING, GSEA, and Cytoscape plugin cytoHubba bioinformatics tools. The results showed that GC-MS-characterized compounds from CMJE displayed a very promising antioxidative potential. In an animal model study, CMJE significantly ( P < 0.05) decreased blood glucose, serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), creatinine, uric acid, and lipid levels and increased glucose tolerance as well as glucose homeostasis (HOMA-IR and HOMA-b scores). The animal's body weights and relative organ weights were found to be partially restored. Tissue architectures of the pancreas and the kidney were remarkably improved by low doses of CMJE. Compound-protein interactions showed that thymine, catechol, and 5-hydroxymethylfurfural of CMJE interacted with 84 target proteins. Of the top 15 proteins found by Cytoscape 3.6.1, 8, CAT and OGG1 (downregulated) and CASP3 , COMT , CYP1B1 , DPYD , NQO1 , and PTGS1 (upregulated), were dysregulated in diabetes-related kidney disease. The data demonstrate the highly prospective use of CMJE in the regulation of tubulointerstitial tissues of patients with diabetic nephropathy., Competing Interests: The authors declare no conflict of interest., (Copyright © 2021 Rickta Rani Das et al.)