Search

OBJECTIVE: The purpose of this study was to evaluate the degree of color change, any rebound effect, and sensitivities associated with using 2 different concentrations of carbamide peroxide in vivo. METHOD AND MATERIALS: Twenty-five subjects used 10% and 15% agents in trays for 14 days on different sides of their maxillary arches. Subjects returned in 3 days and at 1, 2, 3, and 6 weeks for evaluation of color change and rebound effect. Shade matching, photographic means, and a colorimeter were used for evaluation. Subjects self-reported gingival and tooth sensitivity on a scale of 1 (no sensitivity) to 5 (severe sensitivity). RESULTS: After 2 weeks, delta L*, delta a*, delta b*, delta E* and delta shade guide rank means for the 10% whitening agent were 6.50, -1.37, -4.63, 8.79, and -15.40, respectively; for the 15% agent, they were 8.72, -1.63, -5.90, 11.03, and -16.59, respectively. After 6 weeks, delta L*, delta a*, delta b*, delta E*, and delta shade guide rank means for the 10% whitening agent were 3.04, -0.99, -3.19, 5.13, and -13.13, respectively; for the 15% agent, they were 3.48, -1.01, -3.60, 5.58, and -13.65, respectively. Means for gingival sensitivity were 1.18 and 1.21 for the 10% and 15% agents, respectively; means for tooth sensitivity were 1.21 and 1.26 for the 10% and 15% agents, respectively. CONCLUSION: All 3 methods of evaluation revealed a significant difference in the tooth lightness achieved by 10% and 15% products at 2 weeks but no significant difference at 6 weeks. No statistically significant difference was found in gingival or tooth sensitivity. [ABSTRACT FROM AUTHOR]

OBJECTIVE: The purpose of this study was to determine the degradation of 10% carbamide peroxide within the first hour of use and the effect of pellicle on the degradation of carbamide peroxide in vivo. METHOD AND MATERIALS: Fifteen subjects were assigned to wear nightguard trays filled with bleaching gel for 0.5, 2.5, 5.0, 10.0, 20.0, 40.0, and 60.0 minutes under 2 conditions: (1) subjects did not receive a prophylaxis before each bleaching treatment (pellicle was assumed to be present on the tooth surface); and (2) subjects received prophylaxis to remove pellicle from the tooth surface. At each evaluation time, 3 types of sample were collected: (1) a 'grab sample,' a sample of gel taken with a spatula from the reservoir of the tray on the maxillary right central incisor; (2) the remaining gel from the tray; and (3) the remaining gel scraped from the teeth. The collected gel samples were analyzed for the amount of peroxide using the United States Pharmacopeia-accepted method. Subjects were asked not to swallow the saliva during treatment but to expectorate into a beaker. The collected saliva was analyzed to determine the amount of peroxide. This sample represented the approximate amount of peroxide that subject would ingest during treatment. RESULTS: Pellicle did not affect the degradation of carbamide peroxide for the teeth or grab samples. The degradation of carbamide peroxide was exponential, except during the first 5 minutes, when the degradation rate was much higher. The saliva collected from subjects during use of the bleaching tray revealed an average of 2.1 mg of carbamide peroxide for 1 hour of bleaching treatment. CONCLUSION: The degradation rate is not affected by the removal of the pellicle. [ABSTRACT FROM AUTHOR]

Abstract Background Babesia are emerging health threats to humans and animals in the United States. A collaborative effort of multiple disciplines to attain optimal health for people, animals and our environment, otherwise known as the One Health concept, was taken during a research workshop held in April 2009 to identify gaps in scientific knowledge regarding babesioses. The impetus for this analysis was the increased risk for outbreaks of bovine babesiosis, also known as Texas cattle fever, associated with the re-infestation of the U.S. by cattle fever ticks. Results The involvement of wildlife in the ecology of cattle fever ticks jeopardizes the ability of state and federal agencies to keep the national herd free of Texas cattle fever. Similarly, there has been a progressive increase in the number of cases of human babesiosis over the past 25 years due to an increase in the white-tailed deer population. Human babesiosis due to cattle-associated Babesia divergens and Babesia divergens-like organisms have begun to appear in residents of the United States. Research needs for human and bovine babesioses were identified and are presented herein. Conclusions The translation of this research is expected to provide veterinary and public health systems with the tools to mitigate the impact of bovine and human babesioses. However, economic, political, and social commitments are urgently required, including increased national funding for animal and human Babesia research, to prevent the re-establishment of cattle fever ticks and the increasing problem of human babesiosis in the United States.

Objective : The study evaluated the water sorption (WSP) and water solubility (WSL) characteristics of different luting agents over a 180-day water storage period. Materials and Methods : Nine luting materials, i.e., conventional resin cement: Panavia F (PF), Rely X ARC (RA), self-adhesive resin cement: Rely X Unicem (RU), Breez (BZ), Maxcem Elite (MX), BisCem (BC) and resin-modified glass ionomer cement: FujiCem (FC), FujiPlus (FP) Rely X luting plus (RL) were assessed and fifty-two-disc specimens of each material were fabricated. All specimens were desiccated until a constant weight (W0) was reached. Thirteen specimens for each luting material were then randomly assigned to one of the four water immersion periods (7, 30, 90, and 180 days). After each period, the specimens were removed from the water and weighed to get W1. The samples were again desiccated for a second time and W 2 was measured. Both WSP and WSL were determined by the following equations: WSP (%) = (W 1 - W 2 ) × 100/W 0 and WSL (%) = (W 0 - W 2 ) × 100/W 0 . Assessments were performed following ISO standards. ANOVA was used to assess the effect of luting agent and time period on water sorption and solubility. Pair-wise comparisons were adjusted using Tukey's multiple comparison procedure. A significance level of 0.05 was used for all statistical tests. Results : The highest mean WSP and WSL (WSP/WSL) were demonstrated by resin-modified glass-ionomers (RL 18.32/3.25, FC 17.08/4.83, and FP 14.14/1.99), while resin luting agents showed lower WSP and WSL results (PF 1.6/0.67 and RA 1.76/0.46), respectively. The self-adhesive agents exhibited a wide range of WSP and WSL values (RU 1.86/0.13, BZ 4.66/0.93, and MX 3.68/1.11). Self-adhesive cement showed lower WSP and WSL compared with the resin-modified glass-ionomers ( p < 0.05). All the materials reached equilibrium after 90-days. Conclusions : Resin-based luting materials have the lowest sorption and solubility. Rely X Unicem self-adhesive luting materials were comparable to resin luting materials for WSL and WSP. Resin-modified glass-ionomer showed the highest water sorption and solubility compared with both resin and self-adhesive materials.

Persistent organic pollutants (POPs) continue to cycle through the atmosphere and hydrosphere despite banned or severely restricted usages. Global scale analyses of POPs are challenging, but knowledge of the current distribution of these compounds is needed to understand the movement and long-term consequences of their global use. In the current study, air and seawater samples were collected Oct. 2007-Jan. 2008 aboard the Icebreaker Oden en route from Göteborg, Sweden to McMurdo Station, Antarctica. Both air and surface seawater samples consistently contained α-hexachlorocyclohexane (α-HCH), γ-HCH, hexachlorobenzene (HCB), α-Endosulfan, and polychlorinated biphenyls (PCBs). Sample concentrations for most POPs in air were higher in the northern hemisphere with the exception of HCB, which had high gas phase concentrations in the northern and southern latitudes and low concentrations near the equator. South Atlantic and Southern Ocean seawater had a high ratio of α-HCH to γ-HCH, indicating persisting levels from technical grade sources. The Atlantic and Southern Ocean continue to be net sinks for atmospheric α-, γ-HCH, and Endosulfan despite declining usage., (Copyright © 2017 Elsevier B.V. All rights reserved.)

We report the synthesis and characterization of a series of novel hexaalkoxydibenz[a,c]anthracenes. While the parent compound is not mesomorphic, the introduction of substituents in the 10- and 13-positions yields compounds with columnar liquid crystalline phases over very broad temperature ranges.

Atlantic bluefin tuna (ABFT) are highly valued and heavily exploited, and critical uncertainties regarding their population structure hinder effective management. Evidence supports the existence of two breeding populations of ABFT; a western population in the Gulf of Mexico and an eastern population in the Mediterranean Sea; both of which migrate and mix in the North Atlantic. Conventional tagging studies suggest low rates of trans-Atlantic migrations; however, electronic tagging and stable isotopes in otoliths indicate stock mixing up to 57% between management zones delineated by 45 degrees W longitude. Here we show that organochlorine pesticides and polychlorinated biphenyls (PCBs) can be used as tracers of bluefin tuna foraging grounds in the North Atlantic and confirm that stock mixing of juvenile tuna within the U.S. Mid Atlantic Bight is indeed high (33-83% eastern origin), and is likely spatially and temporally variable. We further demonstrate that >10% of the Mediterranean population is migratory, that young bluefin tuna migrate from the Mediterranean to western Atlantic foraging grounds as early as age 1, and then return to the Mediterranean Sea as young as age 5, presumably to breed. The tracer method described here provides a novel means for distinguishing bluefin tuna populations and ontogenetic shifts in migration in the North Atlantic.

This study evaluated the degree of color change of teeth, the rebound effect and the sensitivities of teeth and gingiva associated with the use of an in-office bleaching agent followed by an at-home bleaching agent to lighten stained teeth in an in vivo study. Thirty-seven subjects who met the Inclusion/Exclusion criteria were divided into two cells. Twenty-five subjects received three 15-minute in-office bleaching treatments in succession with 36% hydrogen peroxide (HP) on the maxillary anterior teeth, followed by at-home overnight bleaching with 15% carbamide peroxide (CP) for seven days on one side of the dental arch. Twelve other subjects received a 40-minute in-office bleaching treatment on their maxillary anterior teeth, followed by at-home overnight bleaching for seven days on one side of the dental arch with the same product. The cells of teeth on the other side of the dental arch received the same in-office treatment but were not bleached overnight for seven days. Color was subjectively evaluated using the Vitapan Classical Shade Guide and was objectively evaluated using the Chroma Meter at the baseline appointment, immediately after in-office bleaching and at 4, 7 and 14 days and 3 months after the in-office treatment. For two weeks, the subjects completed sensitivity evaluations of gingival tissues and hard tooth tissues. The cells that did not receive the at-home bleaching had significantly less color change than the cells that received at-home bleaching. The cell that was bleached for 40 minutes and received the at-home treatment had significantly less overall change (deltaE) at 14 days and 3 months than the cell that received three 15-minute treatments with the at-home treatment. Throughout the study, the subjects in the three 15-minute treatment cells had less gingival and tooth sensitivity than the other cells.

This review compares nine published studies conducted at the Indiana University School of Dentistry. Twenty-five products in four different systems were evaluated using the Trubyte Bioform Color Ordered Shade Guide and a Chroma Meter. The dentist-prescribed overnight bleaching delta mean shade guide value (DSGV) 10 weeks post-bleaching was 13.2 and delta E value (DEV) 4.7; dentist-prescribed daytime bleaching DSGV 10 weeks post-bleaching was 10.5 and DEV 3.4; in-office bleaching DSGV 10 weeks post-bleaching was 6.7 and DEV was 2.1; over-the-counter bleaching DSGV two weeks post-bleaching was 7.2 and DEV was 4.1. A color difference of Delta E 2.6 is perceivable. Tooth whitening is observable with all methods of bleaching. Dentist-prescribed overnight bleaching was shown to be the most effective method of bleaching.

Persistent organic pollutants reach polar regions by long-range atmospheric transport and biomagnify through the food web accumulating in higher trophic level predators. We analyzed Adélie penguin (Pygoscelis adeliae) samples collected from 2004 to 2006 to evaluate current levels of sigmaDDT (p,p'-DDT + p,p'-DDE) in these birds, which are confined to Antarctica. Ratios of p,p'-DDT to p,p'-DDE in Adélie penguins have declined significantly since 1964 indicating current exposure to old rather than new sources of sigmaDDT. However, sigmaDDT has not declined in Adélie penguins from the Western Antarctic Peninsula for more than 30 years and the presence of p,p'-DDT in these birds indicates that there is a current source of DDT to the Antarctic marine food web. DDT has been banned or severely restricted since peak use in the 1970s, implicating glacier meltwater as a likely source for DDT contamination in coastal Antarctic seas. Our estimates indicate that 1-4 kg x y(-1) sigmaDDT are currently being released into coastal waters along the Western Antarctic Ice Sheet due to glacier ablation.

The antimicrobial and anticariogenic properties of a copper varnish (experimental mixture of Doc's Best Red Copper cement and Copalite varnish, Cooley and Cooley, Ltd, Houston, TX, USA: designated in this study as "Copper Seal") on the root surface were evaluated in an in vitro microbial caries model. Fifty-six human root specimens were prepared from anterior teeth and randomly divided into four groups: Groups 1 and 3-Copper Seal; Group 2-chlorhexidine varnish, the positive control (Cervitec, Ivolcar Vivadent, Schaan, Liechtenstein) and Group 4-a negative control that received no treatment. The varnishes were painted in Groups 1, 2 and 3, then visually removed after 24 hours in Group 1. The specimens were demineralized in a microbial caries model for five days. Plaque was collected from the specimens to obtain bacterial colonization numbers, then the specimens were sectioned and analyzed for lesion extent using Confocal Laser Scanning microscopy. There were no significant differences (p>0.05) among the four groups in terms of bacterial count. Regarding caries lesion development, the group with copper varnish visually removed (Group 1) and the non-treated group (Group 4) had significantly greater total area caries lesions and total lesion fluorescence than the copper varnish without removal group (Group 3) and the chlorhexidine group (Group 2). Therefore, it was concluded that copper and chlorhexidine varnishes have anticariogenic effects on root surfaces, as tested in this model.

This study evaluated tooth whitening and sensitivity that occurred during and after 14 days of overnight bleaching with 15% carbamide peroxide gel with potassium nitrate and fluoride (Opalescence 15% PF, OP) and 16% carbamide peroxide with amorphous calcium phosphate (Nite White 16%, NW). Thirty-two subjects bleached their teeth using custom trays. The subjects had a baseline evaluation and returned after 7, 14, 21, 35 and 90 days for subjective and objective color evaluations. The subjects also recorded daily tooth and gingival sensitivity. The treatments were compared for differences in mean L*, a*, b* and shade guide rank order at baseline and each appointment thereafter, using repeated measures analysis of variance (ANOVA). OP and NW showed significant tooth whitening. Subjects using OP were significantly lighter in b* and E* than those using NW, while exhibiting no difference in tooth or gingival sensitivity overall or during any evaluation.

Purpose: This clinical evaluation compared a neutral sodium fluoridated whitening product to a neutral non-fluoridated whitening product in terms their effects on human enamel surface microhardness (SMH) and human enamel/resin composite shear bond strength (SBS) following various treatment times., Materials and Methods: Subjects were evaluated for enamel SMH and enamel/resin SBS following 15% carbamide peroxide (CP) with and without potassium nitrate and fluoride (PF). Twenty subjects (80 first or second premolars), who were treatment-planned for premolar extraction due to orthodontic therapy, were allocated into two groups, A and B. Group A received 15% CP, while Group B received 15% CP with PF. Each patient had a control tooth, a 14-day treatment + 14-day recovery tooth, a 14-day treatment + no recovery tooth and a 4-day + no recovery tooth. Each tooth was further divided into two testing surfaces; the facial surface was used for SMH, while the lingual surface was used for SBS., Results: The results of this study determined that there was no statistically significant difference between the effects of the two products on SMH and enamel/resin SBS. Additionally, there was no statistically significant difference between the treatment specimens compared to the controls in terms of SMH. However, there was a significant difference between the treatment groups compared to the controls in terms of enamel/resin SBS., Conclusion: Within the limitations of this clinical study, 15% CP with and without PF does not seem to alter the SMH of human enamel. However, 15% CP with and without PF significantly reduced enamel/resin SBS immediately following tooth whitening therapy, up to 14 days post-treatment.

This in vivo pilot study evaluated eight products with hydrogen peroxide (HP) concentrations ranging from 15% to 35%. The treatment contact time varied from 15 minutes to 60 minutes. Patients were evaluated for color at baseline, immediately after treatment and at one, two, four and six weeks after treatment using a colorimeter, shade guide and photos. All eight products were effective in bleaching teeth. Colorimeter data for deltaE immediately after treatment was 6.77. At one and six weeks after bleaching, there were 51% and 65% reductions in deltaE, respectively.

Bleaching tetracycline-stained teeth is the most challenging form of tooth lightening. This article reports on 44 subjects who bleached their tetracycline-stained teeth for 6 months using trays with reservoirs overnight in a half-mouth designed study and 2 of 3 different concentrations of carbamide peroxide (10%, 15% or 20%). The subjects were followed for 5 years. The area evaluated was the middle third of the teeth. More than 55% of tooth lightening occurred within 1 month; after 5 years, more than 65% of the maximum tooth whitening remained for all 3 gel concentrations. Tooth whitening can be accomplished with any of the 3 concentrations used.

In this laboratory study, the microtensile bond strengths of a conventional glass ionomer cement (GIC) and a resin modified glass ionomer cement (CRMGIC) to artificially created carious dentin and sound dentin were compared, and the ultrastructural morphology of the fractured interface was examined with a low-vacuum scanning electron microscope (SEM). The specimens were divided into 4 groups: 1) a conventional GIC (Ketac-Fil Plus Aplicap) placed on sound dentin; 2) a conventional GIC placed on artificially created carious dentin; 3) an RMGIC (Photac-Fil Aplicap) placed on sound dentin and 4) an RMGIC placed on artificially created carious dentin. Artificial carious lesions were created using a chemical demineralizing solution of 0.1 M/L lactic acid and 0.2% carbopol. GIC buildups were made on the dentin surfaces according to the manufacturer's directions. After storage in distilled water at 37 degrees C for 24 hours, the teeth were sectioned vertically into 1 x 1 x 8-mm beams for the microtensile bond strength test. The microtensile bond strength of each specimen was measured, and failure mode was determined using an optical microscope (40x). The fractured surfaces were further examined with SEM. Two-way analysis of variance showed that the mean microtensile bond strengths of a GIC and an RMGIC to carious dentin were significantly lower than those to sound dentin, and the mean microtensile bond strengths of Photac-Fil to both sound and carious dentin were significantly higher than those of Ketac-Fil Plus. Chi-square tests indicated that there was a significant difference in failure mode between the sound dentin and carious dentin groups. In sound dentin groups, cohesive failure in GIC was pre- dominant; whereas, mixed failure was predominant in carious dentin groups. SEM examination showed that the specimens determined to be cohesive failures under light microscopy in the Photac-Fil/Sound Dentin group were actually mixed failures under high magnification of SEM.

This study compared silver penetration in the adhesive interface among four versions of adhesives from the same manufacturer: OptiBond FL, OptiBond Solo Plus, OptiBond Solo Plus Dual Cure, and OptiBond Solo Plus Self-Etch, when coupled with dual-cured composite, CoreRestore 2 (Kerr). Twenty flat dentin surfaces were prepared using one of the adhesives and bonded with the composite, following the manufacturer's instructions. The surfaces were sectioned into 2-mm slabs and immersed in ammoniacal silver nitrate for 24 hours. Each specimen was exposed to a photodeveloping solution for eight hours and examined with a scanning electron microscope (SEM). The water permeable area occupied by the silver nitrate tracer was determined, and the relative weight of silver was analyzed by wavelength dispersive spectrometry (WDS). The OptiBond FL group had a significantly lower silver content than the other groups (p < 0.0001). Each group demonstrated different patterns of silver deposition within the adhesive layer and within various features of artifactual fracture from dehydration stress of the SEM. This may be indicative of weak links in the bonded interfaces. Simplified-step adhesives showed increased permeability, which can lead to disruption of coupling with composites.

Purpose: To evaluate the expression of specific neuropeptides associated with inflammation, substance-P (SP) and calcitonin gene-related peptide (CGRP), after night guard vital bleaching with 10% carbamide peroxide gel., Methods: 10 patients with four caries free premolars scheduled for orthodontic extraction had these teeth bleached with 10% Opalescence as follows: tooth #28, no treatment (control); #5, 4 days of bleaching; #12, 2 weeks of bleaching; #21, 2 weeks of bleaching, followed by 2 weeks without treatment. All teeth in the four groups were extracted at the same time. Immediately after extraction the teeth were frozen at -197 degrees C in liquid nitrogen. The pulp samples were prepared for enzyme-linked immunoabsorbent assay (ELISA) to determine the concentrations of the SP, CGRP and total protein in the pulp tissue., Results: The analysis of mean SP and mean CGRP/ng protein/ml resulted in no significant differences among the four groups. It was concluded that the study did not demonstrate an increase in the release of SP and/or CGRP during night guard vital bleaching of teeth with 10% Opalescence.

The anti-cariogenic properties of three fluoride-releasing materials on root surfaces were evaluated using two different caries models. Standardized cavities were prepared in dentin specimens and restored with either glass-ionomer, resin-modified glass-ionomer, polyacid-modified resin composite or resin composite material. Two groups of 56 specimens were demineralized using a microbial caries model for three days, while another 56 specimens were demineralized using a chemical demineralization model for three days. Lesions around the restorations were measured with a confocal laser scanning microscope. Glass ionomers demonstrated significant anti-cariogenic properties when exposed to the chemical model. However, no significant anti-cariogenic properties were observed with the microbial caries model. In conclusion, the fluoride releasing materials showed different anti-cariogenic properties in root surfaces under the different caries models, suggesting that caution should be exercised when trying to extrapolate the results of in vitro studies to the clinical situation.

Various organochlorine pesticides and brominated diphenyl ethers (BDE-47, -99, and -100) were measured in sea ice algae, water column plankton, and juvenile and adult krill collected in the Palmer Long-Term Ecological Research (LTER) region west of the Antarctic Peninsula during late austral winter and midsummer, 2001-2002. BDEs were 100-1000 times higher in ice algae and 2-10 times higher in phytoplankton than the most abundant organochlorine pesticide, hexachlorobenzene (HCB), reflecting the current production and use of BDEs versus organochlorine pesticides. However, concentrations of HCB and BDEs were significantly lower in summer plankton than in ice algae indicating lower atmospheric inputs, removal from the water column, and/or biodilution of persistent organic pollutants at the base of the food web during summer. Concentrations of HCB (juvenile and adult krill) and BDEs (juvenile krill) were not significantly different from their primary food source (ice algae, phytoplankton), and BDEs were significantly lower in adult krill versus phytoplankton, indicating no biomagnification of HCB or BDEs during transfer from plankton to krill. The high concentrations of BDEs and HCB in ice algae and associated juvenile krill illustrate the importance of sea ice as a vector for entry of POPs into the Antarctic marine ecosystem.

Microleakage testing continues to be undertaken using a variety of techniques and methodologies. This study compared four microleakage tracers to determine if a difference exists in their ability to demonstrate microleakage on a single dental amalgam restorative material by testing in two phases. Class V amalgam restorations were placed on the facial surfaces of 105 extracted human premolars with all margins in enamel. The teeth were stored at 37 degrees C in water for two weeks except during thermocycling for 2500 cycles between 8 degrees C and 48 degrees C. The teeth were prepared for microleakage testing by sealing the external surfaces with nail polish and tinfoil, leaving the restoration and surrounding 1 mm exposed. In the first phase, four groups of 15 teeth were randomly assigned to 0.5% basic fuchsin dye, 2.0% fluorescent dye, 1.5% reactive orange 14 and 45Ca. In the second phase, another three groups of 15 teeth were immersed in 45Ca, then immersed in one of the remaining three tracers. Ridit analysis and Newman-Keuls multiple comparisons were used to compare the groups at a significance level of 0.05. The results indicate that there are differences in observed microleakage between tracers and there is no statistical influence on dye tracers by initial immersion in 45Ca.

Objectives: This study evaluated the influence of water on the volumetric dimensional change of six direct placement core build-up materials by using Archimedes' principle., Methods: The effect on dimensional change due to the setting reaction was determined through the use of a silicone oil storage medium. The materials used were two dual-cured resin composites (CoreStore and Build-It FR), two chemically activated resin composites (CorePaste and Ti-Core), one metal-reinforced glass ionomer cement (Ketac-Silver), and one resin-modified glass ionomer (Fuji II LC Core). Using the manufacturers' instructions for each material, cylindrical specimens were prepared with dimensions of 7+/-0.1 mm in diameter and 2+/-0.1 mm in height. Each material had four groups (n = 5) based on storage conditions; silicone oil at 23 and 37 degrees C and distilled water at 23 and 37 degrees C. A 0.01 mg resolution balance was used to determine volumetric dimensional change using an Archimedean equation. Measurements were made 30 min after mixing, and at the time intervals of 1, 14, and 56 days., Results: All materials exhibited dimensional change. Ketac-Silver had the most shrinkage in silicone oil and Fuji II LC showed the highest expansion in distilled water. The glass ionomer materials showed more change than did any of the resin composite materials., Significance: Current direct placement core materials show variation in the amount of volumetric dimensional change seen over a period of 56 days.

This half-mouth design, two-week treatment phase, combined with an 11-week evaluation double-blinded randomized clinical trial was conducted to compare two in-office bleaching products, StarBrite (35% hydrogen peroxide) with Opalescence Xtra Boost (38% hydrogen peroxide), for degree of color change of teeth, any relapse effect (darkening) associated with discontinued use and gingival irritation and tooth sensitivity associated with use. The degree of color change and relapse was evaluated by using a colorimeter, shade guide and color slide photographs. Participants self-evaluated their gingival irritation and tooth sensitivity. They recorded daily the level of gingival irritation and tooth sensitivity experienced during the first three weeks of the study. The results of this study showed no statistical difference between products during active treatment periods and any follow-up visits using the three-color evaluation methods. Color relapse began after the bleaching treatments were finished and continued until the fifth week, after which no further significant changes appeared. Also, there was no statistical difference in gingival irritation and tooth sensitivity between the products.

This in vitro study compared three different methods to evaluate detectable levels of microleakage in Class II restorations placed with five commercially available packable resin composites: Alert, Glacier, Pyramid, Solitaire 2 and SureFil. A flowable resin composite, Flow-It, was used to line all packable composites. The hybrid resin composite Z100 was also included. The adhesive system used with all groups was Scotchbond MultiPurpose Plus. Standard Class II cavities were prepared on the mesial (enamel margins) and distal (dentin margins) sides of the teeth with no communication between them. Based on a power analysis, 180 permanent human molars were randomly assign to each of six groups with 30 specimens per group. All restorative materials were placed following manufacturers' recommendations. Following restoration and thermocycling, the specimens were stored at room temperature in solutions of 45Ca, methylene blue and rhodamine B, sequentially. Microleakage was ordinal scored as 1 (no penetration), 2 (penetration up to one-third of the cervical floor), 3 (penetration beyond one-third of the cervical floor to the axial wall) and 4 (penetration along the axial wall) by two independent evaluators. Analysis of the occlusal surfaces was also accomplished following the same scheme. In this study, tracers/dyes were evaluated for differences in penetration using generalized estimating equation methodology applied to cumulative logistic regression models. The results showed that Rhodamine B detected more microleakage than 45Ca or methylene blue, and 45Ca generally detected more microleakage than methylene blue.

This in vivo study determined the kinetics of 3% hydrogen peroxide in a bleaching gel within the first hour. The material used in this study was 3% hydrogen peroxide gel (Perfecta 3/15, Premier Dental Products Co) and the study involved 10 subjects who met the inclusion and exclusion criteria. Each subject wore the tray with gel six different times on separate days. Evaluation of the remaining amount of hydrogen peroxide was calculated by the method stated in US Pharmacopoeia. The study results indicate that the mean percentage of hydrogen peroxide recovered for 5, 10, 20, 30, 45 and 60 minutes was 61, 56, 49, 44, 38 and 32, respectively. The amount of hydrogen peroxide in the saliva sample after one hour was 0.42 mg. Excluding the first 10 minutes, the kinetics of hydrogen peroxide in the tray and teeth sample was exponential.

The difficulty related to achieving a balance between wet and dry dentin makes the dentin bonding technique extremely sensitive. This study evaluated the effect of rewetting dried dentin with two commercial desensitizing agents (Protect and HurriSeal) on the dentin shear bond strength of three total-etch dentin bonding agents (Syntac Single-Component, OptiBond Solo Plus and Prime & Bond NT) and compared both to applying these same bonding agents to moist dentin and dry dentin. Each bonding agent was paired with an appropriate resin composite from the same manufacturer (Table 1). Recently extracted, formalin-treated caries-free human molars were used. The occlusal surface of each tooth was ground to create a flat dentin surface. Then, each tooth was mounted in acrylic. Twelve groups (n = 15) were prepared: 1) Syntac Single-Component with Heliomolar resin composite (SSC/H) to moist dentin; 2) SSC/H to dry dentin; 3) SSC/H to dried dentin rewet with Protect; 4) SSC/H to dried dentin rewet with HurriSeal; 5) OptiBond Solo Plus with Point 4 resin composite (OBS+/P4) to moist dentin; 6) OBS+/P4 to dry dentin; 7) OBS+/P4 to dried dentin rewet with Protect; 8) OBS+/P4 to dried dentin rewet with HurriSeal; 9) Prime & Bond NT with TPH Spectrum resin composite (PBNT/TPH) to moist dentin; 10) PBNT/TPH to dry dentin; 11) PBNT/THP to dried dentin rewet with Protect and 12) PBNT/TPH to dried dentin rewet with HurriSeal. Groups 1, 5 and 9 were placed according to manufacturers' instructions (moist dentin) as control groups. All the other groups received a 15-second air blast after etching and prior to applying the one bottle adhesive or desensitizer and one bottle adhesive. Resin composite cylinders [4 mm in diameter and 2 mm in height] were then placed. The specimens were stored in distilled water at 37 degrees C for 24 hours prior to thermocycling 2,500 times (at 8 degrees C and 48 degrees C). Shear bond strengths (SBSs) were measured one week after fabrication by using a circular knife-edge and crosshead speeds of 0.5 mm/minute. Failure modes of debonded specimens were determined under a stereomicroscope (30x). Failed specimens with the low and high shear bond strengths in each group were evaluated under a low vacuum Scanning Electron Microscope (SEM-LV). One-way ANOVA and Tukey's tests were used to compare the different conditions for each bonding system. In the Syntac Single-Component bonding agent groups, there was no significant difference in shear bond strength between the control (15.73 MPa), dry (18.11 MPa) and HurriSeal (16.18 MPa) specimens. Protect specimens showed significantly lower shear bond strength (6.39 MPa). In the OptiBond Solo Plus bonding agent groups, there was no significant difference between the control (20.79 MPa) and the HurriSeal (21.29 MPa) groups, and both groups had significantly greater bonds than the dry (14.13MPa) and Protect (9.57 MPa) groups. In the Prime & Bond NT bonding agent groups, the shear bond strength of the HurriSeal group (20.73 MPa) was significantly higher than the other groups: control (8.05 MPa), dry (5.73 MPa) and Protect (5.45 MPa).

This three-month, single-blind clinical study compared two whitening treatments, at-home with 10% carbamide peroxide and in-office with 35% hydrogen peroxide, for the degree of color change of teeth, color relapse and tooth and gum sensitivity. The degree of color change and color relapse was evaluated by using a colorimeter, shade guide and color slide photography. Teeth and gum sensitivity were self-evaluated by the subjects, who recorded daily the tooth and gum sensitivity they experienced during the two weeks of treatment and one week post-treatment. A 14-day at-home treatment was compared with 60 minutes of in-office treatment (two appointments, each with three 10-minute applications). The at-home treatment produced significantly lighter teeth than the in-office treatment during all active-treatment periods and follow-up visits according to all three-color evaluation methods. Color relapse for both treatments stabilized by six weeks. At-home treatment resulted in statistically significant higher gum sensitivity than in-office treatment during the latter part of the first week. For tooth sensitivity there were no significant differences between the treatments. Eighty four percent of the subjects reported at-home treatment to be more effective and 16% found no difference between the treatments. There were no subjects who reported the in-office treatment to be superior in tooth whitening to the at-home treatment.

This paper describes a technique of placing a semi-rigid cervical matrix slightly past the cervical border of a lesion that extends below (apical to) the gingival crest and inserting the glass ionomer cement through an opening cut in the matrix above the soft tissue level.

This in vivo study evaluated the variation of tray fabrication (trays constructed with or without reservoirs) on the degree of color change of teeth and sensitivities associated with using a 15% carbamide peroxide bleaching agent for two hours once daily for 14 days. Patients returned in one, two, three, six and 12 weeks. Color changes were evaluated by subjective shade matching, comparing clinical photographs and through measurements obtained using a color-measuring device. Subjects were asked to keep a daily record of any tooth and gingival sensitivity on the right and left side of their maxillary dental arch for three weeks. Colorimeter data showed that teeth lightened with agent with reservoirs were significantly lighter than teeth lightened with the same agent without reservoirs. However, the amount of lightening was below the threshold of visual differentiation. Shade guide and slide photography data showed no significant differences between teeth lightened with agent with reservoirs compared to teeth lightened with the same agent without reservoirs. In addition, no significant differences in tooth and gingival sensitivity were found between the tray side with reservoirs and those without reservoirs.