Search

Copyright of Arid Zone Research / Ganhanqu Yanjiu is the property of Arid Zone Research Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Currently, a majority of global residential air-conditioning requirements are met using cooling systems based on the vapor compression cycle (VCC). To meet the future demand for space cooling and to reduce the corresponding environmental impact, there is a need for alternative cooling systems which require less resources and exhibit a higher coefficient of performance (COP). One of proposed alternatives is called the hybrid evaporative-vapor compression (HEVC) cycle, which utilizes adiabatic latent cooling in combination with the VCC. In this paper, we conducted a feasibility analysis of a HEVC system by comparing its performance to that of VCC for various global climates. To accomplish this, we developed and validated models to simulate the performance of residential VCC and HEVC systems. ASHRAE weather data and design conditions were then used to compare the performance of the two systems. In general, HEVC systems are best suited for hot arid climates with energy reduction greater than 20%. Conversely, humid climates are not suitable for HEVC adoption due to degraded performance of evaporative coolers in these climates. In addition to comparing the energy savings from HEVC systems, it is also critical to analyze their water consumption. Generally, climates that benefit the most from HEVC technology tend to also experience water scarcity issues. Thus, both the energy savings and water consumption of HEVC systems must be analyzed to guide the discussion on their adoption.

Vineyard microclimate is a main determining factor for grape yield and quality. In the Eastern Foothills of the Helan Mountains in the Ningxia region, China, grape is a critical economic crop for wine making. The microclimate of vineyards in 2019 and 2020 was analyzed on the basis of observations from eight vineyards microclimate stations and a national reference station. The vineyard microclimate was compared with the larger-scale local weather conditions, and the vineyard microclimate was compared within and among different climatic zones. In addition, the climate was evaluated at the four study wine grape areas. The results showed that: (1) In the same wine-grape-growing area where the climate was similar, vineyard microclimate was affected by elevation, topography, and soil texture. (2) Excepting average wind velocity, there were no statistically significant (p < 0.05) differences in minimum and maximum air temperatures or relative humidity between the study field microclimate observation stations and the local national reference station. (3) Among the four climate-zone-based wine-grape-growing areas, vineyard microclimate was related to topography, geographical location, and soil type. In particular, the Yinchuan and Qingtongxia areas had an abundant heat resource, and the Hongsipu area had sufficient precipitation and high photosynthetically active radiation (PAR). By contrast, the Shizuishan area had a relatively low-to-moderate amount of heat, precipitation, and radiation resources for grape. (4) According to the climate assessment of agricultural products—wine grape (QX/T 557—2020), the climate was superior in 2019 than in 2020 for wine grapes. In particular, the climate for grape was better in the Yinchuan area than in other study areas. The results of this study are evidence-based and could be used to assist the local wine grape community in making decisions about cultivars, management practices, area expansions, marketing strategies, etc. [ABSTRACT FROM AUTHOR]

In global climate governance, anticipatory assessments map future options and pathways, in light of prospective risks and uncertainties, to inform present-day planning. Using data from 125 interviews, we ask: How are foundational experts contesting the conduct of anticipatory assessment of carbon removal and solar geoengineering – as two emerging but controversial strategies for engaging with climate change and achieving Net Zero targets? We find that efforts at carbon removal and solar geoengineering assessment leverage and challenge systems modeling that has become dominant in mapping and communicating future climate impacts and mitigation strategies via IPCC reports. Both suites of climate intervention have become stress-tests for the capacity of modeling to assess socio-technical strategies with complex, systemic dimensions. Meanwhile, exploring societal dimensions demands new modes of disciplinary expertise, qualitative and deliberative practices, and stakeholder inclusion that modelling processes struggle to incorporate. Finally, we discuss how the patterns of expert contestation identified in our results speak to multiple fault-lines within ongoing debates on reforming global environmental assessments, and highlights key open questions to be addressed. • Explores how anticipatory assessments of climate interventions are conducted. • Assessments both leverage and challenge systems modeling dominant at the IPCC. • Systems (climatic and economic) modeling are re-purposed and mis-purposed tools. • Critics call for mixed-methods, multi-scale, user-facing practices to nuance modeling. • These mirror conversations on reforming and linking global assessments. [ABSTRACT FROM AUTHOR]

The Canary current upwelling is one of the major eastern boundary coastal upwelling systems in the world, bearing a high productive ecosystem and commercially important fisheries. The Canary current upwelling system (CCUS) has a large latitudinal extension, usually divided into upwelling zones with different characteristics. Eddies, filaments and other mesoscale processes are known to have an impact in the upwelling productivity, thus for a proper representation of the CCUS and high horizontal resolution are required. Here we assess the CCUS present climate in the atmosphere–ocean regionally coupled model. The regional coupled model presents a global oceanic component with increased horizontal resolution along the northwestern African coast, and its performance over the CCUS is assessed against relevant reanalysis data sets and compared with an ensemble of global climate models (GCMs) and an ensemble of atmosphere-only regional climate models (RCMs) in order to assess the role of the horizontal resolution. The coupled system reproduces the larger scale pattern of the CCUS and its latitudinal and seasonal variability over the coastal band, improving the GCMs outputs. Moreover, it shows a performance comparable to the ensemble of RCMs in representing the coastal wind stress and near-surface air temperature fields, showing the impact of the higher resolution and coupling for CCUS climate modelling. The model is able of properly reproducing mesoscale structures, being able to simulate the upwelling filaments events off Cape Ghir, which are not well represented in most of GCMs. Our results stress the ability of the regionally coupled model to reproduce the larger scale as well as mesoscale processes over the CCUS, opening the possibility to evaluate the climate change signal there with increased confidence. [ABSTRACT FROM AUTHOR]

Energy storage is an emerging technology that can enable the transition toward renewable-energy-based distributed generation, reducing peak power demand and the time difference between production and use. The energy storage could be implemented both at grid level (concentrated) or at user level (distributed). Chemical batteries represent the de facto standard of storage systems for performance and maturity; however, batteries feature a quite large environmental footprint and use precious raw materials. Mechanical storage technologies could represent a viable alternative to chemical batteries, because of their reduced impacts on the environment and on raw materials. This article presents the design of a motor/generator for a flywheel energy storage at household level. Three reference machines were compared by means of finite element analysis: a traditional iron-core surface permanent-magnet (SPM) synchronous machine, a synchronous reluctance machine (SynchRel), and an ironless SPM synchronous machine. Simulation shows that the ironless machine is good candidate for distributed energy storage, because of its high efficiency, high discharge duration, and low losses. A prototype ironless machine was designed and manufactured. Experiments confirm the simulation results. [ABSTRACT FROM AUTHOR]

Objective: A diversity, equity, and inclusion (DEI) needs assessment was conducted at a health sciences library. The objectives were to (1) quantitatively assess patrons' attitudes towards the existing DEI climate in the library and (2) qualitatively identify contextual factors influencing patrons' perceptions. The purpose was to better understand patrons' views of the DEI climate in order to identify potential gaps, strengths, and areas of improvement within the library. Population: The assessment was led by a DEI Team at the University of Florida's Health Science Center Libraries (HSCL). HSCL serves the university's six health science colleges from two sites, Gainesville and Jacksonville. HSCL Gainesville was selected as the study location, due to higher annual footfall within the physical library. Methods: Two "HappyOrNot" customer satisfaction machines were placed by library exits. Twelve DEI-related questions were displayed on the machines, one question per week, for the duration of 12 weeks total. Additionally, a box for open-ended comments was placed by each machine. The survey used convenience sampling and was anonymous. Findings: The total number of responses was 3,445, with 7 written comments. Overall, respondents felt happiest with the library's welcoming and home-like environment. The library was perceived by many as a physically safe space. Most also felt that the library demonstrates a commitment to DEI and that they are treated fairly, equitably, and with respect by library staff. Areas of concern were a perceived lack of respect from other library visitors, as well as library services for patrons with disabilities and non-native English language speakers. Conclusions: The project enabled the HSCL to gather important information concerning patrons' perceptions of the library's DEI climate and their associated needs. The HappyOrNot machines provided a straightforward and convenient method for patron feedback. However, limitations of the pilot included the inability to obtain participants' demographic information as well as the anecdotal evidence indicating that some respondents did not read the questions. Future plans therefore involve a follow-up online survey with detailed demographic questions and further use of the HappyOrNot machines to conduct additional micro-assessments. [ABSTRACT FROM AUTHOR]

NSF project to evaluate, test and model effective trans-disciplinary collaborative research and design in teaching, learning, and productivity among architecture and civil engineering and civil engineering technology students who develop real world interventions for communities impacted by flooding related to sea level rise. The studio-based learning (SBL) engages students in different stages of learning andprovides opportunities to acknowledge conflicts between methods and models within each discipline. The application of the impacts of SBL and trans-disciplinary study would provide useful data and replicable models for programs seeking to improve minority persistence and success in STEM-related inquiry and future professional and academic achievements. [ABSTRACT FROM AUTHOR]

Cities in the USA and around the world have begun to take an active role in responding to climate change. A central requirement for effective urban climate strategies is the capacity to understand and measure how the climate is changing, the physical, environmental, and social impacts of the changes, and whether adaptation and resiliency policies and programs put in place in response are working. The objective of this paper is to review and assess how urban climate change and resiliency efforts can be measured and to define what might serve as meaningful indicator and monitoring protocols. The New York City Panel on Climate Change (NPCC) is used as a case study along with a reviews of the emerging literature of urban climate change indicators to analyze the requirements and processes needed for a successful urban climate resiliency indicator and monitoring (I and M) system. In the paper, the basic requirements of a proposed Urban Climate Resilience Indicators and Monitoring System are presented. A specific illustration of an I and M system for tracking the urban heat island highlights challenges as well as potential solutions embedded within such systems. Discussions how these protocols can be translated to other locales and settings, as well as the relationship to the US National Climate Assessment indicator process, are presented. [ABSTRACT FROM AUTHOR]

Abstract State and local governments, businesses, community organizations, and the general public are taking an increasingly significant role in climate impact assessment. Driven by impacts to constituents and customers and threats to human health, essential services, and property values, local organizations are on the front lines of responding to climate change. National and international efforts such as the U.S. National Climate Assessment and Intergovernmental Panel on Climate Change provide fundamental scientific understanding as well as methods and modeling tools. Subnational climate assessments can build on this foundation and tailor models and analyses to specific local or decision contexts. However, subnational climate assessment and adaptation presents new scientific and research challenges, such as those related to downscaling climate models, simulating extreme events, and understanding local values and institutional practices. As state, local, and sectoral assessments become more common across the nation, there is a critical opportunity to share learnings and identify challenges and pitfalls. Building off a National Academies of Sciences, Engineering, and Medicine activity focusing exclusively on subnational climate assessment, we consider the methods and results from a variety of examples to synthesize findings about current practices and the future of subnational climate assessment.

State and local governments, businesses, community organizations, and the general public are taking an increasingly significant role in climate impact assessment. Driven by impacts to constituents and customers and threats to human health, essential services, and property values, local organizations are on the front lines of responding to climate change. National and international efforts such as the U.S. National Climate Assessment and Intergovernmental Panel on Climate Change provide fundamental scientific understanding as well as methods and modeling tools. Subnational climate assessments can build on this foundation and tailor models and analyses to specific local or decision contexts. However, subnational climate assessment and adaptation presents new scientific and research challenges, such as those related to downscaling climate models, simulating extreme events, and understanding local values and institutional practices. As state, local, and sectoral assessments become more common across the nation, there is a critical opportunity to share learnings and identify challenges and pitfalls. Building off a National Academies of Sciences, Engineering, and Medicine activity focusing exclusively on subnational climate assessment, we consider the methods and results from a variety of examples to synthesize findings about current practices and the future of subnational climate assessment. Plain Language Summary: Climate assessments provide descriptions of the current and future impacts of climate change. Such assessments have long been a part of national and international activities on climate change. Increasingly, state and local governments, businesses, and other groups have begun climate assessments that address possible impacts from climate change specific to their constituents or customers. When taking national and international efforts to a local level, two important challenges arise. One is related to the challenge of applying science and modeling developed for the large scale to a smaller scale. The second is the need to translate technical analysis into usable information for decision makers and the public. Here we build off of a workshop convened by the National Academies of Sciences, Engineering, and Medicine to consider these issues. Key Points: State and local governments and others are taking an increasingly significant role in climate impact assessmentSuch assessments present analytical challenges from downscaling national models, simulating extremes, and integrating local perspectivesThe evolution of California's assessments, in its fourth iteration, reflects the demands for climate assessments to translate science into response activities [ABSTRACT FROM AUTHOR]

Among the various transport modes aviation's impact on climate change deserves special attention. Due to typical flight altitudes in the upper troposphere and above, the effect of aircraft engine emissions like e.g. water vapour, nitrogen oxides and aerosols on radiative forcing agents is substantial. The projected doubling of aircraft movements in the next 15 years will lead to an increase of aviation's impact on climate and requires immediate mitigation options. Besides technological measures also new operational strategies are widely discussed; one of these concepts which has been subject of several studies in the past is Intermediate Stop Operations (ISO). It is based on the idea to reduce the stage length of flights by performing one or more intermediate landings during a mission. Here, we analyse the ISO concept by combining different models, which include a realistic traffic simulation taking into account operational constraints and ambient conditions, like e.g. wind, the calculation of engine emissions and the integration of a climate response model. We analyse the ISO concept for today's worldwide aircraft fleet, including its influence on global emissions distributions as well as the impact on climate change by taking into account CO2 and non-CO2 effects, arising from contrail-cirrus, water vapour and nitrogen oxide emissions. We show in agreement with earlier findings that due to shorter flight distances the amount of fuel burnt over the mission can be reduced by roughly 5 % on average globally. For the first time, we quantify the climate impact of ISO, where the flight trajectory is optimised for fuel use and the aircraft is not redesigned for the ISO procedure. We find an increased warming effect, which arises from nitrogen oxide and water vapour emissions, which are released at higher cruise altitudes and which over-compensate reduced warming effects from CO2 and contrail-cirrus. However, we expect a climate impact reduction for ISO even with existing aircraft, avoiding the higher flight altitude in the first flight segment and hence reducing the fuel savings. Thus, climate impact benefits could be achieved if lower fuel savings were acceptable. Moreover, this negative climate impact is found for the particular case of introducing ISO using the current wide-body fleet. It does not necessarily apply to the adoption of ISO using aircraft redesigned for a shorter range.

The spike-grain structure and yield data of winter wheat observed at 10 winter wheat observation stations in Jiangsu agrometeorological observation stations in the China Meteorological Observation Network were used to design the asessment model and evaluation criteria of the effects of climate change on spike- grain structure and yield of winter wheat. The linear regression method was used to determine the parameters of the assessment model, and the climate fact extrapolation method was used to determine future climate change scenarios. The effects of climate change on spike-grain structure and yield of winter wheat in Jiangsu Province were calculated and analyzed finally. The results showed that with the climate change, the meteorological conditions during the growth and development of winter wheat changed, which caused the number of effective spikes to decrease, and the number of grains per spike and thousand-grain weight to increase, and this new type of spike-grain structure combination was beneficial to the increase of the unit yield of winter wheat. The variations of meteorological elements caused by climate change during winter wheat growth and development had different effects on spike-grain structure at different growth stages. The spike-grain structure had an "increasing-decreasing" periodic variation with the growth period overall, with a period of one to three stages. The relationship between winter wheat growth and development and meteorological conditions can be adjusted in real time through stress-resistant cultivation techniques to achieve the high-yield and high-quality cultivation target of winter wheat production. [ABSTRACT FROM AUTHOR]

Abstract Heritage-related guidelines and standards recommend stable climatic conditions, since these contribute to the extension of heritage collections life. As a result, numerous museums and other heritage institutions implement (expensive) mitigation measures to achieve stable conditions. Nevertheless, temperature and relative humidity fluctuations are often still observed. This contribution demonstrates that the analysis of temperature and humidity peaks and drops helps to identify hazards which cause fluctuations in different frequency ranges. This hazard identification provides information on the type of mitigation actions that are required in the near future and in which order they need to be implemented. The approach is illustrated with a case study. A 22 month monitoring campaign was performed in a chapel in the center of Antwerp (Belgium) where the climatic conditions are controlled with a heating, ventilation and air conditioning (HVAC) system. Low-, mid- and high-frequency fluctuations were separated and discussed for their hazards. Highlights • Stable climate conditions are recommended for heritage preservation. • We developed a methodology that focuses on peaks and drops in climate data. • We isolate low-, mid-, and high-frequency fluctuations to simplify hazard identification. • This supports the selection of mitigation actions that improve conservation conditions. • We demonstrate the method on data of a 22 month monitoring campaign in a chapel. [ABSTRACT FROM AUTHOR]

Changes in land use and land cover (LULC) have important and fundamental interactions with the global climate system. Top-down global scale projections of land use change have been an important component of climate change research; however, their utility at local to regional scales is often limited. The goal of this study was to develop an approach for projecting changes in LULC based on land use histories and demographic trends. We developed a set of stochastic, empirical-based projections of LULC change for the state of California, for the period 2001-2100. Land use histories and demographic trends were used to project a 'business-as-usual' (BAU) scenario and three population growth scenarios. For the BAU scenario, we projected developed lands would more than double by 2100. When combined with cultivated areas, we projected a 28% increase in anthropogenic land use by 2100. As a result, natural lands were projected to decline at a rate of 139 km2 yr−1; grasslands experienced the largest net decline, followed by shrublands and forests. The amount of cultivated land was projected to decline by approximately 10%; however, the relatively modest change masked large shifts between annual and perennial crop types. Under the three population scenarios, developed lands were projected to increase 40-90% by 2100. Our results suggest that when compared to the BAU projection, scenarios based on demographic trends may underestimate future changes in LULC. Furthermore, regardless of scenario, the spatial pattern of LULC change was likely to have the greatest negative impacts on rangeland ecosystems. [ABSTRACT FROM AUTHOR]

A review on climate parameters affecting applicability of passive and low energy heating and cooling techniques is presented. The study has been developed from existing research work results, and aims to serve as a first-stage assessment tool of the viability of these solutions at a particular location, depending on outdoor conditions to be faced. This contribution starts with a justification of comprehensive climate analysis as the first step to evaluate whether a specific passive or low energy solution would be efficient, or on the contrary, it would incur in higher energy consumption. Comfort requirements indoors as well as building typology and use are then briefly tackled as they would determine actual applicability. It continues gathering the weather variables affecting passive solar, natural ventilation, free cooling and evaporative cooling technologies. Key climatic information is then studied for 4 cities selected for their different summer climate conditions. Finally it ends with an overview of existing tools for representing climate information in bioclimatic design. Thus, the main target of this paper is to serve as a guide for an adequate preselection of the optimal passive energy solutions in buildings at a specific site, from existing research on climate analysis. [ABSTRACT FROM AUTHOR]

Drought preparedness programs are considered a primary defense against drought hazards. This article investigates state drought programs in the western United States, including a review of drought plans and interviews with state drought officials. While nearly all states have developed drought plans and larger drought programs, the scope and depth of these programs vary widely. State programs and plans typically address monitoring, declaration and response, and communication and coordination. Yet few states conduct postdrought assessments or impact and risk assessments. Resources tend to be allocated more for drought response than mitigation. Officials emphasized not only the importance of available monitoring data, but also the need for improved information for monitoring and predicting drought. State drought officials recommended the following: (1) clear and relevant drought indicators and triggers; (2) frequent communication and coordination among state agencies, local governments, and stakeholders; (3) regularly updated drought plans; and (4) strong leadership that includes a full-time state drought coordinator. [ABSTRACT FROM AUTHOR]

It is increasingly important for postsecondary disability services personnel to provide targeted disability-related training to faculty rather than support college students with disabilities on a case-by-case basis. In this study, we examined faculty attitudes toward disability-related topics and inclusive teaching practices at two public four-year institutions using the Inclusive Teaching Strategies Inventory (ITSI). Findings suggest that malleable factors such as training opportunities positively affect faculty attitudes toward disability and inclusive instruction based on the tenets of Universal Design. Implications for practice specifically related to disability services personnel and faculty outreach strategies are discussed. [ABSTRACT FROM AUTHOR]

• A methodology to model hybrid evaporative-vapor compression systems was developed. • Their performance was compared to a standard vapor compression system. • ASHRAE data were used to evaluate these systems for 21 global climates. • Water consumption requirements of HEVC systems were analyzed. • HEVC systems are 20% more efficient than VCC in hot and dry climates. Currently, a majority of global residential air-conditioning requirements are met using cooling systems based on the vapor compression cycle (VCC). To meet the future demand for space cooling and to reduce the corresponding environmental impact, there is a need for alternative cooling systems which require less resources and exhibit a higher coefficient of performance (COP). One of proposed alternatives is called the hybrid evaporative-vapor compression (HEVC) cycle, which utilizes adiabatic latent cooling in combination with the VCC. In this paper, we conducted a feasibility analysis of a HEVC system by comparing its performance to that of VCC for various global climates. To accomplish this, we developed and validated models to simulate the performance of residential VCC and HEVC systems. ASHRAE weather data and design conditions were then used to compare the performance of the two systems. In general, HEVC systems are best suited for hot arid climates with energy reduction greater than 20%. Conversely, humid climates are not suitable for HEVC adoption due to degraded performance of evaporative coolers in these climates. In addition to comparing the energy savings from HEVC systems, it is also critical to analyze their water consumption. Generally, climates that benefit the most from HEVC technology tend to also experience water scarcity issues. Thus, both the energy savings and water consumption of HEVC systems must be analyzed to guide the discussion on their adoption. [ABSTRACT FROM AUTHOR]

During the last century, much of the United States experienced warming temperatures and changes in amount and intensity of precipitation. Changes in future climate conditions present additional risk to water and watershed managers. The most recent release of U.S. EPA's BASINS watershed modeling system includes a Climate Assessment Tool (CAT) that provides new capabilities for assessing impacts of climate change on water resources. The BASINS CAT provides users with the ability to modify historical climate and conduct systematic sensitivity analyses of specific hydrologic and water quality endpoints to changes in climate using the BASINS models (Hydrologic Simulation Program -- FORTRAN (HSPF)). These capabilities are well suited for addressing questions about the potential impacts of climate change on key hydrologic and water quality goals using the watershed scale at which most important planning decisions are made. This paper discusses the concepts that motivated the CAT development effort; the resulting capabilities incorporated into BASINS CAT; and the opportunities that result from integrating climate assessment capabilities into a comprehensive watershed water quality modeling system. [ABSTRACT FROM AUTHOR]

Data on metabolic rates (n = 81) and clothing insulation (n = 96) of school children and adolescents (A, primary school: age 9-10; B, primary school: age 10-11 year; C, junior vocational (technical) education: age 13-16 (lower level); D, same as C but at advanced level; and E, senior vocational (technical) education, advanced level: age 16-18) were collected (Diaferometer, Oxylog, Heart Rate derivation) during theory-, practical- and physical education- lessons. Clothing insulation was calculated from clothing weight, covered body surface area, and the number of clothing layers worn. Clothing insulation was found to be similar to that expected for adults in the same (winter) season, with minimal variation with age or school type (0.9 to 1.0 clo; 1.38 clo where coverall was worn), but more variation within groups (coefficient of variation 6-12%). Metabolic rate values (W.m-2) were lower than expected from adult data for similar activities, but are supported by other child data. The results of this study can be used to establish design criteria for school climate control systems or as general data on energy expenditure for children and adolescents. The results emphasize the need for specific child data and show the limited value of size-corrected adult data for use in children. [ABSTRACT FROM AUTHOR]

Abstract: The influence of climate on plants geography is studied through a probabilistic calibration between a botanical database, containing 12 000 plots, and a meteorological database composed of 574 climatic stations. The calibration measures the climatical optimum (position) and the indicator power (concentration) of 1874 plants for six climatic variables. The validation of these relations is based upon the comparison of the estimation of climate by plants and the values measured by climatic stations near the plots. This validation underlines that plants are accurate (accuracy=88.5%) and stable (stability=96.5%) bio-indicators of climate variables. To cite this article: E. Garbolino et al., C. R. Biologies 330 (2007). [Copyright &y& Elsevier]